{"title":"Maxwell Windlass","description":"\u003cp\u003eMaxwell Windlass products currently published by All Marine World.\u003c\/p\u003e","products":[{"product_id":"maxwell-hrc10-10-horizontal-windlass","title":"Maxwell Windlass Hor Windlass 3\/8 \u0026 5\/8\" Rode To 55'","description":"\u003cp\u003eMaxwell Marine HRC10-10 Horizontal Windlass\u003c\/p\u003e\u003cp\u003eMaxwell's all new HRC10 Horizontal Series represents yet another breakthrough in performance and anchor handling excellence. These horizontal, fully automatic rope\/chain windlasses have been designed to meet the demands for use on larger vessels up to 52 feet, which require a completely above deck installation system. HRC10's flawlessly handle rope up to 5\/8\" (16 mm) and chain up to 3\/8\" (10 mm) in size, including the thick rope to chain splice.\u003c\/p\u003e\u003cp\u003eThe modern appearance of the HRC10 Series retains the classic good looks of previous Maxwell horizontal windlasses, while incorporating design features years ahead of its competitors.\u003c\/p\u003e\u003cp\u003eThe two part case consists of a die cast, marine-grade hard anodized alloy front section and a rugged and easily removable composite motor cover aft section. This two piece watertight case allows for quick and easy, on-deck, routine maintenance.\u003c\/p\u003e\u003cp\u003eWave Design™ Chainwheel:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe new and revolutionary patented Wave Design™ chainwheel is able to accommodate a wide range of chain pitch differences, within the specified chain size diameters, suitable for use with the HRC10 Series. This patented rope chain wheel incorporates two unique design concepts that greatly improve the handling and control of the rope\/chain spliced rode. The outer ribs of the chainwheel are angled slightly forward, ensuring that the rope and the chain are smoothly guided in the wheel during anchor retrieval.\u003c\/li\u003e\n\u003cli\u003eFeatures:\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSimple bolt down installation ensures effortless and rapid on-deck installation and set up.\u003c\/p\u003e\u003cp\u003eThe stainless steel pressure arm always exerts maximum control pressure on the rode (rope, splice or chain).\u003c\/p\u003e\u003cp\u003eThe unique Maxwell wrap around™ horizontal chainwheel ensures that more than 90° of the wheel is used, allowing greatly improved rope and chain handling compared with competitor designs.\u003c\/p\u003e\u003cp\u003eThe HRC10 works just as effectively with all-chain rodes for those who desire the added security and holding power of an all-chain anchor system.\u003c\/p\u003e\u003cp\u003eThe integral chain pipe and huge, through deck hawse pipe throat ensures easy entry of the rope\/chain rode into and out of the anchor locker.\u003c\/p\u003e\u003cp\u003eCone type clutch\/brake mechanism permits manual, free fall™ anchoring and emergency crank recovery of the rode and anchor if required.\u003c\/p\u003e\u003cp\u003eThe sealed oil bath and marine-grade hard anodized, alloy gearbox provides high efficiency output drive via precision worm and worm wheel.\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eMaximum Pull - 1870 lbs.\u003c\/p\u003e\u003cp\u003eStatic Hold - 3300 lbs.\u003c\/p\u003e\u003cp\u003eChain Short Link - 3\/8\" (10mm)\u003c\/p\u003e\u003cp\u003eChain Speed - 79ft\/min.\u003c\/p\u003e\u003cp\u003eRope Speed - 66ft\/min.\u003c\/p\u003e\u003cp\u003ePower Supply - 12V or 24V\u003c\/p\u003e\u003cp\u003eMotor Power - 1200W\u003c\/p\u003e\u003cp\u003eKit Includes:\u003c\/p\u003e\u003cp\u003eWindlass\u003c\/p\u003e\u003cp\u003eCircuit Breaker\u003c\/p\u003e\u003cp\u003eHelm Switch\u003c\/p\u003e\u003cp\u003eDual Solenoid\u003c\/p\u003e\u003cp\u003eEmergency Crank\u003c\/p\u003e\u003cp\u003eImportant: Maxwell windlasses must be used in conjunction with a chain stopper or alternative snubbing device to take the load off the windlass while laying at anchor. The chain stopper and alternative snubbing system should also be used to secure the anchor in the fully raised position while under way.\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Maxwell Marine HRC10-10 Horizontal Windlass designed for? The Maxwell Marine HRC10-10 Horizontal Windlass is a fully automatic rope\/chain windlass designed for larger vessels up to 52 feet that require a completely above-deck installation. It is designed to handle rope up to 5\/8 inch (16mm) and chain up to 3\/8 inch (10mm), including the rope-to-chain splice.\u003c\/li\u003e\n\u003cli\u003eWhat rope and chain sizes are compatible with the Maxwell Marine HRC10-10? The HRC10-10 is designed for rope up to 5\/8 inch (16mm) and 3\/8-inch (10mm) short-link chain. Its Wave Design™ chainwheel is designed to accommodate a range of chain pitch differences within the specified chain diameters and helps guide the rope and chain during retrieval.\u003c\/li\u003e\n\u003cli\u003eCan the Maxwell Marine HRC10-10 be used with an all-chain anchor rode? Yes. The Maxwell Marine HRC10-10 works with all-chain rodes as well as r…\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maxwell Windlass","offers":[{"title":"Default Title","offer_id":50581813395714,"sku":"MAX-HRC101012V","price":4504.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/Untitled-1__14686.1763741580_6d3a20f2-5dc9-44d7-b031-af7cab89ac2c.jpg?v=1791079092"},{"product_id":"maxwell-hrc-ff-8-horizontal-windlass","title":"Maxwell Windlass Hor Windlass 5\/16 \u0026 9\/16\" Rode To 45' Free Fall","description":"\u003cp\u003eMaxwell Marine HRC FF-8 Horizontal Windlass\u003c\/p\u003e\u003cp\u003eThe new HRC FF are packed with original and proven features including patented rode management technology developed by Maxwell. Aesthetically pleasing above deck design, encapsulating the motor and drive in a watertight case, saving space below deck and allowing simple routine maintenance. Guaranteed trouble free rode transition from rope to chain, by means of an innovative, proven and patented pressure arm system, within a safe enclosed design.\u003c\/p\u003e\u003cp\u003eDie cast, marine-grade, alloy case is hard anodized for unsurpassed marine protection. Integrated composite nylon, through deck hawse pipe for ease of installation and smooth, snag-free operation.\u003c\/p\u003e\u003cp\u003eNow incorporating Maxwell's automatic free-fall technology. Simply activate the windlass Free Fall lever, operate your down control (helm station or footswitch) and the windlass will freefall your anchor. Ready to lift the anchor? Activate the up control and the free fall device automatically disengages allowing you to power up your anchor. Emergency free fall function in the event of onboard power failure. Activated by the supplied, emergency Free Fall lever.\u003c\/p\u003e\u003cp\u003eWave Design™ Chainwheel:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eThe new and revolutionary patented Wave Design™ chainwheel is able to accommodate a wide range of chain pitch differences, within the specified chain size diameters, suitable for use with the HRC10 Series. This patented rope\/ chain wheel incorporates two unique design concepts that greatly improve the handling and control of the rope\/chain spliced rode. The outer ribs of the chainwheel are angled slightly forward, ensuring that the rope and the chain are smoothly guided in the wheel during anchor retrieval.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eSimple bolt down installation ensures effortless and rapid on-deck installation and set up.\u003c\/p\u003e\u003cp\u003eHigh efficiency spur gearbox incorporating a robust non-backwind mechanism.\u003c\/p\u003e\u003cp\u003eHigh speed, jam-free retrieval of rope and chain controlled from a remote panel mounted Up\/Down switch.\u003c\/p\u003e\u003cp\u003eRevolutionary new chainwheel.\u003c\/p\u003e\u003cp\u003eHeavy duty, dual direction motor incorporating new technology features, including integrated wiring for quick electrical installation.\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eMaximum Pull 900 lbs.\u003c\/p\u003e\u003cp\u003eStatic Hold 1540 lbs.\u003c\/p\u003e\u003cp\u003eChain Short Link 5\/16\" (8mm)\u003c\/p\u003e\u003cp\u003eLine Speed  108 ft\/min\u003c\/p\u003e\u003cp\u003ePower Supply 12V or 24V\u003c\/p\u003e\u003cp\u003eMotor Power 600W\u003c\/p\u003e\u003cp\u003eKit Includes:\u003c\/p\u003e\u003cp\u003eWindlass\u003c\/p\u003e\u003cp\u003eDual direction solenoid pack\u003c\/p\u003e\u003cp\u003eCircuit breaker \/ isolator panel\u003c\/p\u003e\u003cp\u003eUp\/down remote control panel\u003c\/p\u003e\u003cp\u003eEmergency crank \/ clutch release handle\u003c\/p\u003e\u003cp\u003eMotor \u0026amp; Gearbox\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Maxwell Marine HRC FF-8 Horizontal Windlass designed for? The Maxwell Marine HRC FF-8 Horizontal Windlass is designed for powered deployment and retrieval of rope and chain anchor rode. Its above-deck design houses the motor and drive in a watertight case, while the enclosed pressure arm system is designed to provide smooth rope-to-chain rode transition.\u003c\/li\u003e\n\u003cli\u003eWhat chain size is compatible with the Maxwell Marine HRC FF-8? The Maxwell Marine HRC FF-8 is specified for 5\/16-inch (8mm) short-link chain. Its Wave Design™ chainwheel is designed to accommodate a range of chain pitch differences within the specified chain diameter while helping guide the rope and chain smoothly during anchor retrieval.\u003c\/li\u003e\n\u003cli\u003eHow does the automatic free-fall feature work on the Maxwell Marine HRC FF-8? To use automatic free-fall, activate the windlass Free Fall lever and operate the down control from the helm station or footswitch. When the up control is activated, the free-fall device automatically disengages so the anchor can be powered up. An emergency free-fall function is also provided for onboard power failure.\u003c\/li\u003e\n\u003cli\u003eWhat are the pulling and line-speed specifications of the Maxwell Marine HRC FF-8? The HRC FF-8 has a maximum pull of 900 lb and a static hold of 1,540 lb. Its specified line speed is 108 feet per minute. The windlass uses a 600W motor and can operate with either a 12V or 24V power supply. How is the…\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maxwell Windlass","offers":[{"title":"Default Title","offer_id":50581813461250,"sku":"MAX-HRCFF812V","price":1859.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/Untitled-1__92479.1756127950.webp?v=1791079093"},{"product_id":"maxwell-80-amp-breakerisolator-panel","title":"Maxwell Windlass 80 Amp Bkr Isolator Pnl","description":"\u003cp\u003eMaxwell Marine 80 AMP Breaker\/Isolator Panel\u003c\/p\u003e\u003cp\u003eMaxwell circuit breaker\/isolator panels are available to suit a wide range of windlasses and capstans.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eFor protection of the main conductor circuit for DC winches\u003c\/p\u003e\u003cp\u003eMount as close as possible to the battery power source to ensure protection against short circuit and to reduce the risk of DC motor burn-out in the event of winch overloading\u003c\/p\u003e\u003cp\u003eEnables the battery, or electrical supply, to be isolated when winch is not in use\u003c\/p\u003e\u003cp\u003eSuitable for 12V or 24V DC systems\u003c\/p\u003e\u003cp\u003eMaxwell Marine 80 AMP Breaker\/Isolator Panel\u003c\/p\u003e\u003cp\u003eMaxwell Marine 80 AMP Breaker\/Isolator Panel\u003c\/p\u003e","brand":"Maxwell Windlass","offers":[{"title":"Default Title","offer_id":50581813559554,"sku":"MAX-P100790","price":190.19,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/Untitled-1__96740.1763741580_e0489b76-dede-4280-8766-f2031c694ebd.webp?v=1791079094"},{"product_id":"maxwell-135-amp-breakerisolator-panel","title":"Maxwell Windlass 135 Amp Bkr Isolator Pnl","description":"\u003cp\u003eMaxwell Marine 135 AMP Breaker\/Isolator Panel\u003c\/p\u003e\u003cp\u003eMaxwell circuit breaker\/isolator panels are available to suit a wide range of windlasses and capstans.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eFor protection of the main conductor circuit for DC winches\u003c\/p\u003e\u003cp\u003eMount as close as possible to the battery power source to ensure protection against short circuit and to reduce the risk of DC motor burn-out in the event of winch overloading\u003c\/p\u003e\u003cp\u003eEnables the battery, or electrical supply, to be isolated when winch is not in use\u003c\/p\u003e\u003cp\u003eSuitable for 12V or 24V DC systems\u003c\/p\u003e\u003cp\u003eMaxwell Marine 135 AMP Breaker\/Isolator Panel\u003c\/p\u003e\u003cp\u003eMaxwell Marine 135 AMP Breaker\/Isolator Panel\u003c\/p\u003e","brand":"Maxwell Windlass","offers":[{"title":"Default Title","offer_id":50581813625090,"sku":"MAX-P100791","price":195.79,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/Untitled-1__92566.1771856139_7c58c1e7-32a3-451c-82be-f2c7905a0a18.webp?v=1791079094"},{"product_id":"maxwell-updown-anchor-switch","title":"Maxwell Windlass Up Down Anchor Switch 12V","description":"\u003cp\u003eMaxwell Marine Up\/Down Anchor Switch\u003c\/p\u003e\u003cp\u003eEasy to use panel-mounted Up\/Down switch for remote windlass operation from the helm, flying bridge or cockpit. Available for use with dual-directional solenoids.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eManufactured from marine-grade materials.\u003c\/p\u003e\u003cp\u003eSplash proof.\u003c\/p\u003e\u003cp\u003eIncludes power indicator light and back lighting.\u003c\/p\u003e\u003cp\u003eSuitable for use with DC 12V or 24V dual-directional solenoids.\u003c\/p\u003e\u003cp\u003eMaxwell Marine Up\/Down Anchor Switch\u003c\/p\u003e\u003cp\u003eMaxwell Marine Up\/Down Anchor Switch\u003c\/p\u003e","brand":"Maxwell Windlass","offers":[{"title":"Default Title","offer_id":50581813690626,"sku":"MAX-P102938","price":81.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/Untitled-1__30633.1763741580_96d66749-6d97-4b5e-aaa2-a9318835cc5b.jpg?v=1791079096"},{"product_id":"maxwell-covered-foot-switch","title":"Maxwell Windlass Covered Foot Switch","description":"\u003cp\u003eMaxwell Marine Covered Foot Switch\u003c\/p\u003e\u003cp\u003eMaxwell heavy-duty, weather resistant units have a UV stabilized water proof diaphragm and are supplied complete with mounting instructions and screws.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eRated at 200 amps and suitable for 12V or 24V applications.\u003c\/p\u003e\u003cp\u003eNickel-plated copper contacts ensure corrosion-free reliable operation\u003c\/p\u003e\u003cp\u003eOne foot switch supplied standard with each winch (except Freedom, Liberty and hydraulic units).\u003c\/p\u003e\u003cp\u003eUV stabilized plastic\u003c\/p\u003e\u003cp\u003eMaxwell Marine Covered Foot Switch\u003c\/p\u003e\u003cp\u003eMaxwell Marine Covered Foot Switch\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Maxwell Marine Covered Foot Switch used for? The Maxwell Marine Covered Foot Switch is a heavy-duty, weather-resistant switch designed for marine winch applications. It features a UV-stabilized waterproof diaphragm and is rated at 200 amps for use with either 12V or 24V systems.\u003c\/li\u003e\n\u003cli\u003eIs the Maxwell Marine Covered Foot Switch suitable for 12V and 24V applications? Yes. The Maxwell Marine Covered Foot Switch is rated for both 12V and 24V applications. Its 200-amp rating makes it suitable for the electrical requirements specified for this switch.\u003c\/li\u003e\n\u003cli\u003eWhat materials help protect the Maxwell Marine Covered Foot Switch from corrosion? The switch uses nickel-plated copper contacts to provide reliable, corrosion-resistant operation. Its UV-stabilized plastic construction and waterproof diaphragm also help make the unit suitable for weather-exposed marine applications.\u003c\/li\u003e\n\u003cli\u003eWhat is included with the Maxwell Marine Covered Foot Switch? The Maxwell Marine Covered Foot Switch is supplied with mounting instructions and screws for installation. Maxwell also specifies that one foot switch is supplied as standard with each winch, except for Freedom, Liberty, and hydraulic units.\u003c\/li\u003e\n\u003cli\u003eWhich Maxwell winches include a foot switch as standard? One foot switch is supplied standard with each Maxwell winch except Freedom, Liberty, and hydraulic units. If you have one of these excluded winch types, verify the required switch configuration before purchasing or installing this foot switch.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maxwell Windlass","offers":[{"title":"Black","offer_id":50581813920002,"sku":"MAX-P19006","price":104.99,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":50581813952770,"sku":"MAX-P19007","price":104.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/417990_source_1756127310_1332b688-f949-4d6f-84c2-d57bdbf888f3.jpg?v=1791079098"},{"product_id":"maxwell-rc10-vertical-windlass","title":"Maxwell Windlass Vert Windlass 3\/8 \u0026 5\/8\" Rode To 45'","description":"\u003cp\u003eMaxwell Marine RC10 Vertical Windlass\u003c\/p\u003e\u003cp\u003eThe all new stainless steel RC10 fully automatic rope\/chain windlass is designed to effortlessly retrieve and deploy 8mm (5\/16”) chain and 10mm (3\/8\") short link chain and 14mm and 16mm (5\/8\") three strand or 8-brait (plait) rope. The ingeniously designed rope\/chain gypsy (chainwheel) is able to accommodate a wide range of chain pitch differences within the specified chain size diameters. The RC10 is manufacturered from marine-grade 316 stainless steel and chromed bronze for long term durability.\u003c\/p\u003e\u003cp\u003eSimple two piece installation saves time and money and allows easy retrofitting without disassembly of the windlass. Unique spacer tube design allows installation through virtually any deck thickness and the multiple mounting positions and self aligning gearbox ensure optimal location of gearbox and motor in virtually all installation situations.\u003c\/p\u003e\u003cp\u003eThe heavy duty stainless steel pressure arm is designed to effectively help grasp the rope\/chain splice, giving the RC8 an unparalleled level of performance. In combination with a heavy duty, large wire diameter, stainless steel pre-loaded spring, the pressure arm always exerts maximum control pressure. In combination with a heavy duty, large wire diameter, stainless steel pre-loaded spring, the pressure arm pivots on a trouble free bearing, thereby exerting maximum control pressure on the rode and splice.\u003c\/p\u003e\u003cp\u003eWave Design™ Chainwheel:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe new and revolutionary patented Wave Design™ chainwheel is able to accommodate a wide range of chain pitch differences, within the specified chain size diameters, suitable for use with the RC10 Series. This patented rope\/chain wheel incorporates two unique design concepts that greatly improve the handling and control of the rope\/chain spliced rode. The outer ribs of the chainwheel are angled slightly forward, ensuring that the rope and the chain are smoothly guided in the wheel during anchor retrieval.\u003c\/li\u003e\n\u003cli\u003eFeatures:\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe RC10 features Maxwell’s revolutionary, and patented, new Wave Design™ chainwheel.\u003c\/p\u003e\u003cp\u003eThe RC10 works just as effectively with all-chain rodes.\u003c\/p\u003e\u003cp\u003eHuge, through deck hawse pipe throat ensures easy entry of the rope\/chain rode into and out of the anchor locker.\u003c\/p\u003e\u003cp\u003eFull disassembly capability of the top works utilizing only the handle provided and an Allen key.\u003c\/p\u003e\u003cp\u003eManual override and Free Fall, using the emergency crank\/clutch handle provided.\u003c\/p\u003e\u003cp\u003eSealed oil bath and marine-grade hard anodized alloy gearbox provides maximum output via a precision worm and worm wheel.\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eMaximum Pull - 1320lbs.\u003c\/p\u003e\u003cp\u003eStatic Hold - 2640 lbs.\u003c\/p\u003e\u003cp\u003eChain Short Link - 5\/16\" (8mm)\u003c\/p\u003e\u003cp\u003eRope Size (3 strand or 8 plait) - 9\/16\" - 5\/8\" (14mm - 16mm)\u003c\/p\u003e\u003cp\u003eChain Speed - 105 ft\/min\u003c\/p\u003e\u003cp\u003eRope Speed - 92 ft\/min\u003c\/p\u003e\u003cp\u003ePower Supply - 12V or 24V\u003c\/p\u003e\u003cp\u003eMotor Power - 1000W\u003c\/p\u003e\u003cp\u003eKit Includes:\u003c\/p\u003e\u003cp\u003eRC10 Windlass\u003c\/p\u003e\u003cp\u003eDual direction solenoid pack\u003c\/p\u003e\u003cp\u003eCircuit breaker \/ isolator panel\u003c\/p\u003e\u003cp\u003eUp\/down remote control panel\u003c\/p\u003e\u003cp\u003eEmergency crank \/ clutch release handle\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Maxwell Marine RC10 Vertical Windlass designed for? The Maxwell Marine RC10 Vertical Windlass is a fully automatic rope\/chain windlass designed to deploy and retrieve anchor rode. It is manufactured from marine-grade 316 stainless steel and chromed bronze and is designed for use with the specified chain and rope sizes.\u003c\/li\u003e\n\u003cli\u003eWhat rope and chain sizes are compatible with the Maxwell Marine RC10 Windlass? The RC10 is specified for 5\/16-inch (8mm) short-link chain and 9\/16- to 5\/8-inch (14mm-16mm) three-strand or 8-plait rope. The product description also references 10mm (3\/8-inch) short-link chain, so verify your specific chain size before installation.\u003c\/li\u003e\n\u003cli\u003eCan the Maxwell Marine RC10 Vertical Windlass be used with an all-chain rode? Yes. The Maxwell Marine RC10 is designed to work with all-chain rodes as well as rope\/chain spliced rode. Its large through-deck hawse pipe throat is designed to provide easy entry and exit for the rope\/chain rode into and o…\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maxwell Windlass","offers":[{"title":"Default Title","offer_id":50581814051074,"sku":"MAX-RC101012V","price":3831.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/Untitled-1__44563.1763741579_460ebff9-cd8b-4006-baa7-bddf1ca4aaf8.webp?v=1791079098"},{"product_id":"maxwell-rc10-windlass-w-capstan-516-58-up-to-47","title":"Maxwell Windlass Vert Windlass Capstan 5\/16\/5\/8\" Rode To 47'","description":"\u003cp\u003eMaxwell Marine RC10 Windlass w\/ Capstan - 5\/16\" \u0026amp; 5\/8\" - Up to 47'\u003c\/p\u003e\u003cp\u003eMaxwell's all new HRC10 Horizontal Series represents yet another breakthrough in performance and anchor handling excellence. These horizontal, fully automatic rope\/chain windlasses have been designed to meet the demands for use on larger vessels up to 52 feet, which require a completely above deck installation system. HRC10's flawlessly handle rope up to 5\/8\" (16 mm) and chain up to 3\/8\" (10 mm) in size, including the thick rope to chain splice.\u003c\/p\u003e\u003cp\u003eThe modern appearance of the HRC10 Series retains the classic good looks of previous Maxwell horizontal windlasses, while incorporating design features years ahead of its competitors.\u003c\/p\u003e\u003cp\u003eThe two part case consists of a die cast, marine-grade hard anodized alloy front section and a rugged and easily removable composite motor cover aft section. This two piece watertight case allows for quick and easy, on-deck, routine maintenance.\u003c\/p\u003e\u003cp\u003eWave Design™ Chainwheel:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe new and revolutionary patented Wave Design™ chainwheel is able to accommodate a wide range of chain pitch differences, within the specified chain size diameters, suitable for use with the HRC10 Series. This patented rope chain wheel incorporates two unique design concepts that greatly improve the handling and control of the rope\/chain spliced rode. The outer ribs of the chainwheel are angled slightly forward, ensuring that the rope and the chain are smoothly guided in the wheel during anchor retrieval.\u003c\/li\u003e\n\u003cli\u003eFeatures:\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSimple bolt down installation ensures effortless and rapid on-deck installation and set up.\u003c\/p\u003e\u003cp\u003eThe stainless steel pressure arm always exerts maximum control pressure on the rode (rope, splice or chain).\u003c\/p\u003e\u003cp\u003eThe unique Maxwell wrap around™ horizontal chainwheel ensures that more than 90° of the wheel is used, allowing greatly improved rope and chain handling compared with competitor designs.\u003c\/p\u003e\u003cp\u003eThe HRC10 works just as effectively with all-chain rodes for those who desire the added security and holding power of an all-chain anchor system.\u003c\/p\u003e\u003cp\u003eThe integral chain pipe and huge, through deck hawse pipe throat ensures easy entry of the rope\/chain rode into and out of the anchor locker.\u003c\/p\u003e\u003cp\u003eCone type clutch\/brake mechanism permits manual, free fall™ anchoring and emergency crank recovery of the rode and anchor if required.\u003c\/p\u003e\u003cp\u003eThe sealed oil bath and marine-grade hard anodized, alloy gearbox provides high efficiency output drive via precision worm and worm wheel.\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eMaximum Pull 1540 lbs.\u003c\/p\u003e\u003cp\u003eStatic Hold 3300 lbs.\u003c\/p\u003e\u003cp\u003eChain Short Link 5\/16\" (8mm)\u003c\/p\u003e\u003cp\u003eChain Speed 79ft\/min.\u003c\/p\u003e\u003cp\u003eRope Speed 66ft\/min.\u003c\/p\u003e\u003cp\u003ePower Supply 12V or 24V\u003c\/p\u003e\u003cp\u003eMotor Power 1000W\u003c\/p\u003e\u003cp\u003eKit Includes:\u003c\/p\u003e\u003cp\u003eRC10 Windlass w\/ Capstan\u003c\/p\u003e\u003cp\u003eDual direction solenoid pack\u003c\/p\u003e\u003cp\u003eCircuit breaker \/ isolator panel\u003c\/p\u003e\u003cp\u003eUp\/down remote control panel\u003c\/p\u003e\u003cp\u003eEmergency crank \/ clutch release handle\u003c\/p\u003e","brand":"Maxwell Windlass","offers":[{"title":"Default Title","offer_id":50581815755010,"sku":"MAX-RC108CAP12V","price":4067.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/Untitled-1__53314.1763741583_64d749ed-b9f5-47d0-bcbf-2f596de18d0f.webp?v=1791079099"},{"product_id":"maxwell-rc6-vertical-windlass","title":"Maxwell Windlass Vert Windlass 1\/4 \u0026 1\/2\" Rode To 28'","description":"\u003cp\u003eMaxwell Marine RC6 Vertical Windlass\u003c\/p\u003e\u003cp\u003eThe all new stainless steel RC6 fully automatic rope\/chain windlass is designed to effortlessly retrieve and deploy 6mm\/7mm (1\/4”) chain spliced to 12mm (1\/2”) three strand or 8-brait (plait) rope. An inexpensive, high performance and great looking windlass; the RC6 is built for durability and years of trouble free use.\u003c\/p\u003e\u003cp\u003eThe RC6 has been designed with the smaller, trailer boat market in mind. The RC6 is a Low Profile unit.\u003c\/p\u003e\u003cp\u003eWave Design™ Chainwheel:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe new and revolutionary patented Wave Design™ chainwheel is able to accommodate a wide range of chain pitch differences, within the specified chain size diameters, suitable for use with the RC8 Series. This patented rope. Chain wheel incorporates two unique design concepts that greatly improve the handling and control of the rope\/chain spliced rode. The outer ribs of the chainwheel are angled slightly forward, ensuring that the rope and the chain are smoothly guided in the wheel during anchor retrieval.\u003c\/li\u003e\n\u003cli\u003eFeatures:\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe RC6 features Maxwell’s revolutionary, and patented, new Wave Design™ chainwheel.\u003c\/p\u003e\u003cp\u003eThe RC8 works just as effectively with all-chain rodes.\u003c\/p\u003e\u003cp\u003eEvery Maxwell automatic rope\/chain windlass comes complete with all the necessary components for fully automatic dual direction control in a competitively priced package.\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eMaximum Pull - 770lbs.\u003c\/p\u003e\u003cp\u003eStatic Hold - 1540 lbs.\u003c\/p\u003e\u003cp\u003eChain Short Link - 1\/4\" (6mm\/7mm)\u003c\/p\u003e\u003cp\u003eRope Size (3 strand or 8 plait) - 1\/2\"  (12mm)\u003c\/p\u003e\u003cp\u003eChain Speed - 79 ft\/min\u003c\/p\u003e\u003cp\u003eRope Speed - 69 ft\/min\u003c\/p\u003e\u003cp\u003ePower Supply - 12V or 24V\u003c\/p\u003e\u003cp\u003eMotor Power - 500W\u003c\/p\u003e\u003cp\u003eKit Includes:\u003c\/p\u003e\u003cp\u003eRC6 Windlass\u003c\/p\u003e\u003cp\u003eDual direction solenoid pack\u003c\/p\u003e\u003cp\u003eCircuit breaker \/ isolator panel\u003c\/p\u003e\u003cp\u003eUp\/down remote control panel\u003c\/p\u003e\u003cp\u003eEmergency crank \/ clutch release handle\u003c\/p\u003e\u003cp\u003eMaxwell Marine RC6 Vertical Windlass\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Maxwell Marine RC6 Vertical Windlass designed for? The Maxwell Marine RC6 Vertical Windlass is a fully automatic rope\/chain windlass designed for smaller trailer boats. Its low-profile design provides powered deployment and retrieval of 1\/4-inch (6mm\/7mm) chain spliced to 1\/2-inch (12mm) three-strand or 8-plait rope.\u003c\/li\u003e\n\u003cli\u003eWhat rope and chain sizes are compatible with the Maxwell Marine RC6 Windlass? The RC6 is designed for 1\/4-inch (6mm\/7mm) short-link chain and 1\/2-inch (12mm) rope in either three-strand or 8-plait construction. Its Wave Design™ chainwheel is designed to accommodate a range of chain pitch differences within the specified chain size.\u003c\/li\u003e\n\u003cli\u003eCan the Maxwell Marine RC6 Vertical Windlass be used with an all-chain rode? Yes. The supplied product information states that the RC6 works effectively with all-chain rodes. The windlass is also designed for rope\/chain spliced rode using the specified 1\/4-inch chain and 1\/2-inch rope sizes.\u003c\/li\u003e\n\u003cli\u003eWhat is the Wave Design™ chainwheel on the Maxwell Marine RC6? The Wave Design™ chainwheel is a patented Maxwell design intended to improve handling and control of rope\/chain spliced rode. Its outer ribs are angled slightly forward to help guide the rope and chain smoothly into the wheel during anchor retrieval.\u003c\/li\u003e\n\u003cli\u003eWhat are the power and performance specifications of the Maxwell Marine RC6? The RC6 has a maximum pull of 770 lb and a static hold of 1,540 lb. Its chain speed is 79 feet per minute and rope speed is 69 feet per minute. The windlass uses a 500W motor and operates with either a 12V or 24V power supply.\u003c\/li\u003e\n\u003cli\u003eWhat is included with the Maxwell Marine RC6 Vertical Windlass? The RC6 kit includes the windlass, dual-direction solenoid pack, circuit breaker\/isolator panel, up\/down remote control panel, and emergency crank\/clutch release handle. Maxwell states that its automatic rope\/chain windlasses include the components needed for fully automatic dual-direction control.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maxwell Windlass","offers":[{"title":"Default Title","offer_id":50581815853314,"sku":"MAX-RC612V","price":1710.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/Untitled-1__84423.1763741578.webp?v=1791079100"},{"product_id":"maxwell-rc8-windlass-14-12-rode-up-to-32","title":"Maxwell Windlass Vert Windlass 1\/4 \u0026 1\/2\" Rode To 32'","description":"\u003cp\u003eMaxwell Marine RC8 Windlass - 1\/4\" \u0026amp; 1\/2\" Rode - Up to 32'\u003c\/p\u003e\u003cp\u003eThe all new stainless steel RC8 fully automatic rope\/chain windlass is designed to effortlessly retrieve and deploy 6mm\/7mm (1\/4”) chain spliced to 12mm (1\/2”) three strand or 8-brait (plait) rope. The ingeniously designed rope\/chain gypsy (chainwheel) is able to accommodate a wide range of chain pitch differences within the specified chain size diameters.\u003c\/p\u003e\u003cp\u003eSimple two piece installation saves time and money and allows easy retrofitting without disassembly of the windlass. Unique spacer tube design allows installation through virtually any deck thickness and the multiple mounting positions and self aligning gearbox ensure optimal location of gearbox and motor in virtually all installation situations.\u003c\/p\u003e\u003cp\u003eThe heavy duty stainless steel pressure arm is designed to effectively help grasp the rope\/chain splice, giving the RC8 an unparalleled level of performance. In combination with a heavy duty, large wire diameter, stainless steel pre-loaded spring, the pressure arm always exerts maximum control pressure.\u003c\/p\u003e\u003cp\u003eWave Design™ Chainwheel:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe new and revolutionary patented Wave Design™ chainwheel is able to accommodate a wide range of chain pitch differences, within the specified chain size diameters, suitable for use with the RC8 Series. This patented rope. Chain wheel incorporates two unique design concepts that greatly improve the handling and control of the rope\/chain spliced rode. The outer ribs of the chainwheel are angled slightly forward, ensuring that the rope and the chain are smoothly guided in the wheel during anchor retrieval.\u003c\/li\u003e\n\u003cli\u003eFeatures:\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe RC8 features Maxwell’s revolutionary, and patented, new Wave Design™ chainwheel.\u003c\/p\u003e\u003cp\u003eThe RC8 works just as effectively with all-chain rodes.\u003c\/p\u003e\u003cp\u003eHuge, through deck hawse pipe throat ensures easy entry of the rope\/chain rode into and out of the anchor locker.\u003c\/p\u003e\u003cp\u003eFull disassembly capability of the topworks, utilizing only the handle provided and an Allen key.\u003c\/p\u003e\u003cp\u003eManual override and Free Fall, using the emergency crank\/clutch handle provided.\u003c\/p\u003e\u003cp\u003eSealed oil bath and marine-grade hard anodized alloy gearbox provides maximum output via a precision worm and worm wheel.\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eMaximum Pull  770lbs.\u003c\/p\u003e\u003cp\u003eStatic Hold  2640 lbs.\u003c\/p\u003e\u003cp\u003eChain Short Link  1\/4\" (6mm\/7mm)\u003c\/p\u003e\u003cp\u003eRope Size (3 strand or 8 plait)  1\/2\"  (12mm)\u003c\/p\u003e\u003cp\u003eChain Speed  92 ft\/min\u003c\/p\u003e\u003cp\u003eRope Speed  79 ft\/min\u003c\/p\u003e\u003cp\u003ePower Supply  12V or 24V\u003c\/p\u003e\u003cp\u003eMotor Power  600W\u003c\/p\u003e\u003cp\u003eKit Includes:\u003c\/p\u003e\u003cp\u003eRC8 Windlass\u003c\/p\u003e\u003cp\u003eDual direction solenoid pack\u003c\/p\u003e\u003cp\u003eCircuit breaker \/ isolator panel\u003c\/p\u003e\u003cp\u003eUp\/down remote control panel\u003c\/p\u003e\u003cp\u003eEmergency crank \/ clutch release handle\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Maxwell Marine RC8 Windlass designed for? The Maxwell Marine RC8 Windlass is a fully automatic rope\/chain windlass designed to deploy and retrieve anchor rode. It handles 6mm\/7mm (1\/4-inch) chain spliced to 12mm (1\/2-inch) three-strand or 8-plait rope and is specified for boats up to 32 feet.\u003c\/li\u003e\n\u003cli\u003eWhat rope and chain sizes does the Maxwell Marine RC8 Windlass accommodate? The RC8 is designed for 1\/4-inch (6mm\/7mm) short-link chain and 1\/2-inch (12mm) three-strand or 8-plait rope. Its Wave Design™ chainwheel accommodates a range of chain pitch differences within the specified chain diameters and is designed to improve handling of rope\/chain spliced rode.\u003c\/li\u003e\n\u003cli\u003eCan the Maxwell Marine RC8 Windlass be used with an all-chain rode? Yes. The Maxwell Marine RC8 works with all-chain rodes as well as rope\/chain spliced rode. Its through-deck hawse pipe throat provides an opening for the rode to move into and out of the anchor locker.\u003c\/li\u003e\n\u003cli\u003eDoes the Maxwell Marine RC8 Windlass have manual override and free-fall capability? Yes. The RC8 includes manual override and free-fall functionality using the supplied emergency crank\/clutch release handle. The kit also includes a dual-direction solenoid pack, circuit breaker\/isolator panel, and up\/down remote control panel. What a…\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maxwell Windlass","offers":[{"title":"Default Title","offer_id":50581815951618,"sku":"MAX-RC8612V","price":2144.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/Untitled-1__42111__41231.1763741583.webp?v=1791079101"},{"product_id":"maxwell-rc8-vertical-windlass","title":"Maxwell Windlass Vert Windlass 5\/16 \u0026 5\/8\" Rode To 33'","description":"\u003cp\u003eMaxwell Marine RC8 Vertical Windlass\u003c\/p\u003e\u003cp\u003eThe all new stainless steel RC8 fully automatic rope\/chain windlass is designed to effortlessly retrieve and deploy 6mm\/7mm (1\/4”) chain spliced to 12mm (1\/2”) three strand or 8-brait (plait) rope. The ingeniously designed rope\/chain gypsy (chainwheel) is able to accommodate a wide range of chain pitch differences within the specified chain size diameters.\u003c\/p\u003e\u003cp\u003eSimple two piece installation saves time and money and allows easy retrofitting without disassembly of the windlass. Unique spacer tube design allows installation through virtually any deck thickness and the multiple mounting positions and self aligning gearbox ensure optimal location of gearbox and motor in virtually all installation situations.\u003c\/p\u003e\u003cp\u003eThe heavy duty stainless steel pressure arm is designed to effectively help grasp the rope\/chain splice, giving the RC8 an unparalleled level of performance. In combination with a heavy duty, large wire diameter, stainless steel pre-loaded spring, the pressure arm always exerts maximum control pressure.\u003c\/p\u003e\u003cp\u003eWave Design™ Chainwheel:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe new and revolutionary patented Wave Design™ chainwheel is able to accommodate a wide range of chain pitch differences, within the specified chain size diameters, suitable for use with the RC8 Series. This patented rope. Chain wheel incorporates two unique design concepts that greatly improve the handling and control of the rope\/chain spliced rode. The outer ribs of the chainwheel are angled slightly forward, ensuring that the rope and the chain are smoothly guided in the wheel during anchor retrieval.\u003c\/li\u003e\n\u003cli\u003eFeatures:\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe RC8 features Maxwell’s revolutionary, and patented, new Wave Design™ chainwheel.\u003c\/p\u003e\u003cp\u003eThe RC8 works just as effectively with all-chain rodes.\u003c\/p\u003e\u003cp\u003eHuge, through deck hawse pipe throat ensures easy entry of the rope\/chain rode into and out of the anchor locker.\u003c\/p\u003e\u003cp\u003eFull disassembly capability of the topworks, utilizing only the handle provided and an Allen key.\u003c\/p\u003e\u003cp\u003eManual override and Free Fall, using the emergency crank\/clutch handle provided.\u003c\/p\u003e\u003cp\u003eSealed oil bath and marine-grade hard anodized alloy gearbox provides maximum output via a precision worm and worm wheel.\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eMaximum Pull  1320 lbs.\u003c\/p\u003e\u003cp\u003eStatic Hold  2640 lbs.\u003c\/p\u003e\u003cp\u003eChain Short Link  8 mm – 5\/16’’\u003c\/p\u003e\u003cp\u003eRope Size (3 strand or 8 plait)  14 mm - 9\/16’’ 16 mm – 5\/8’’\u003c\/p\u003e\u003cp\u003eChain Speed  92 ft\/min\u003c\/p\u003e\u003cp\u003eRope Speed  105 ft\/min\u003c\/p\u003e\u003cp\u003ePower Supply  12V, 24V, or 48 VDC\u003c\/p\u003e\u003cp\u003eMotor Power  1000W\u003c\/p\u003e\u003cp\u003eKit Includes:\u003c\/p\u003e\u003cp\u003eRC8 Windlass\u003c\/p\u003e\u003cp\u003eDual direction solenoid pack\u003c\/p\u003e\u003cp\u003eCircuit breaker \/ isolator panel\u003c\/p\u003e\u003cp\u003eUp\/down remote control panel\u003c\/p\u003e\u003cp\u003eEmergency crank \/ clutch release handle\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Maxwell Marine RC8 Vertical Windlass used for? The Maxwell Marine RC8 Vertical Windlass is a fully automatic rope and chain windlass designed to retrieve and deploy anchor rode. It is designed for 6mm\/7mm (1\/4\") chain spliced to 12mm (1\/2\") three-strand or 8-plait rope, while also working effectively with all-chain rodes.\u003c\/li\u003e\n\u003cli\u003eWhat chain and rope sizes does the Maxwell Marine RC8 Vertical Windlass support? The RC8 is specified for 8mm (5\/16\") short-link chain and 14mm (9\/16\") to 16mm (5\/8\") three-strand or 8-plait rope. The product description also describes operation with 6mm\/7mm (1\/4\") chain spliced to 12mm (1\/2\") rope.\u003c\/li\u003e\n\u003cli\u003eWhat is the Wave Design chainwheel on the Maxwell Marine RC8? The patented Wave Design chainwheel is designed to accommodate a range of chain pitch differences within the specified chain sizes. Its angled outer ribs help guide the rope and chain smoothly into the wheel during anchor retrieval, improving handling of the rope and chain splice.\u003c\/li\u003e\n\u003cli\u003eDoes the Maxwell Marine RC8 have manual override and free fall? Yes. The RC8 features manual override and free fall using the supplied emergency crank and clutch handle. The topworks can also be fully disassembled using the provided hand…\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maxwell Windlass","offers":[{"title":"Default Title","offer_id":50581816049922,"sku":"MAX-RC8812V","price":2766.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/Untitled-1__84390.1763741578.webp?v=1791079102"},{"product_id":"maxwell-rc8-windlass-w-capstan-516-58-rode-up-to-33","title":"Maxwell Windlass Vert Windlass Capstan 5\/16\/5\/8\" Rode To 33'","description":"\u003cp\u003eMaxwell Marine RC8 Windlass w\/ Capstan - 5\/16\" \u0026amp; 5\/8\" Rode - Up to 33'\u003c\/p\u003e\u003cp\u003eThe all new stainless steel RC8 fully automatic rope\/chain windlass is designed to effortlessly retrieve and deploy 69\/16\" chain spliced to 5\/8\" three strand or 8-brait (plait) rope. The ingeniously designed rope\/chain gypsy (chainwheel) is able to accommodate a wide range of chain pitch differences within the specified chain size diameters.\u003c\/p\u003e\u003cp\u003eSimple two piece installation saves time and money and allows easy retrofitting without disassembly of the windlass. Unique spacer tube design allows installation through virtually any deck thickness and the multiple mounting positions and self aligning gearbox ensure optimal location of gearbox and motor in virtually all installation situations.\u003c\/p\u003e\u003cp\u003eThe heavy duty stainless steel pressure arm is designed to effectively help grasp the rope\/chain splice, giving the RC8 an unparalleled level of performance. In combination with a heavy duty, large wire diameter, stainless steel pre-loaded spring, the pressure arm always exerts maximum control pressure.\u003c\/p\u003e\u003cp\u003eWave Design™ Chainwheel:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe new and revolutionary patented Wave Design™ chainwheel is able to accommodate a wide range of chain pitch differences, within the specified chain size diameters, suitable for use with the RC8 Series. This patented rope. Chain wheel incorporates two unique design concepts that greatly improve the handling and control of the rope\/chain spliced rode. The outer ribs of the chainwheel are angled slightly forward, ensuring that the rope and the chain are smoothly guided in the wheel during anchor retrieval.\u003c\/li\u003e\n\u003cli\u003eFeatures:\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe RC8 features Maxwell’s revolutionary, and patented, new Wave Design™ chainwheel.\u003c\/p\u003e\u003cp\u003eThe RC8 works just as effectively with all-chain rodes.\u003c\/p\u003e\u003cp\u003eHuge, through deck hawse pipe throat ensures easy entry of the rope\/chain rode into and out of the anchor locker.\u003c\/p\u003e\u003cp\u003eFull disassembly capability of the top works utilizing only the handle provided and an Allen key.\u003c\/p\u003e\u003cp\u003eManual override and Free Fall, using the emergency crank\/clutch handle provided.\u003c\/p\u003e\u003cp\u003eSealed oil bath and marine-grade hard anodized alloy gearbox provides maximum output via a precision worm and worm wheel.\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eMaximum Pull  1320lbs.\u003c\/p\u003e\u003cp\u003eStatic Hold  2640 lbs.\u003c\/p\u003e\u003cp\u003eChain Short Link  5\/16\"\" (8mm)\u003c\/p\u003e\u003cp\u003eRope Size (3 strand or 8 plait)  9\/16\" - 5\/8\"  (14mm-16mm)\u003c\/p\u003e\u003cp\u003eChain Speed  105 ft\/min\u003c\/p\u003e\u003cp\u003eRope Speed  92 ft\/min\u003c\/p\u003e\u003cp\u003ePower Supply  12V or 24V\u003c\/p\u003e\u003cp\u003eMotor Power  1000W\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Maxwell Marine RC8 Windlass w\/ Capstan designed for? The Maxwell Marine RC8 Windlass w\/ Capstan is a fully automatic rope\/chain windlass designed for boats up to 33 feet. It is built to retrieve and deploy a rope\/chain spliced rode and features a stainless steel pressure arm, Wave Design™ chainwheel, and marine-grade hard anodized alloy gearbox.\u003c\/li\u003e\n\u003cli\u003eWhat rope and chain sizes are compatible with the Maxwell Marine RC8 Windlass? The RC8 is specified for 5\/16-inch (8mm) short-link chain and 9\/16- to 5\/8-inch (14-16mm) three-strand or 8-plait rope. Its Wave Design™ chainwheel is designed to accommodate a range of chain pitch differences within the specified chain size.\u003c\/li\u003e\n\u003cli\u003eCan the Maxwell Marine RC8 Windlass be used with an all-chain rode? Yes. The product description states that the RC8 works effectively with all-chain rodes as well as rope\/chain spliced rodes. Its large through-deck hawse pipe throat is designed to provide easy entry of the rode into and out of the anchor locker.\u003c\/li\u003e\n\u003cli\u003eDoes the Maxwell Marine RC8 have manual override and free-fall operation? Yes. The RC8 includes manual override and free-fall capability using the supplied emergency crank\/clutch handle. The topworks can also be fully disassembled using the provided handle and an Allen key.\u003c\/li\u003e\n\u003cli\u003eWhat are the pulling and operating specifications of the Maxwell Marine RC8 Windlass? The RC8 has a maximum pull of 1,320 lb and a static hold of 2,640 lb. Its cha…\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maxwell Windlass","offers":[{"title":"Default Title","offer_id":50581816148226,"sku":"MAX-RC88CAP12V","price":3047.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/Untitled-1__29092.1770747839.webp?v=1791079103"},{"product_id":"maxwell-8-plait-nylon-anchor-rode","title":"Maxwell Windlass 8-Plait Nylon Anchor Rode","description":"\u003cp\u003eMaxwell Marine 8-Plait Nylon Anchor Rode\u003c\/p\u003e\u003cp\u003e8-Plait Nylon Anchor Rode for Anchor Windlasses.\u003c\/p\u003e\u003cp\u003eMaxwell Marine 8-Plait Nylon Anchor Rode\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Maxwell Marine 8-Plait Nylon Anchor Rode used for? The Maxwell Marine 8-Plait Nylon Anchor Rode is designed for use with anchor windlasses. It provides an 8-plait nylon rope option for marine anchoring applications where an anchor rode compatible with a windlass is required.\u003c\/li\u003e\n\u003cli\u003eIs the Maxwell Marine 8-Plait Nylon Anchor Rode designed for anchor windlasses? Yes. The product is specifically described as 8-plait nylon anchor rode for anchor windlasses. Verify the rope size and compatibility requirements of your particular windlass before use.\u003c\/li\u003e\n\u003cli\u003eWhat type of rope is the Maxwell Marine Anchor Rode? The Maxwell Marine Anchor Rode is made from 8-plait nylon. The supplied product description identifies it specifically as anchor rode intended for anchor windlasses.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maxwell Windlass","offers":[{"title":"1\/2\" x 150' With 6' 1\/4\" Chain","offer_id":50581816312066,"sku":"MAX-RODE39","price":377.39,"currency_code":"USD","in_stock":true},{"title":"1\/2\" x 200' With 10' 1\/4\" Chain","offer_id":50581816344834,"sku":"MAX-RODE40","price":493.39,"currency_code":"USD","in_stock":false},{"title":"1\/2\" x 300' With 10' 1\/4\" Chain","offer_id":50581816377602,"sku":"MAX-RODE46","price":652.49,"currency_code":"USD","in_stock":false},{"title":"5\/8\" x 200' With 20' 5\/16\" Chain","offer_id":50581816410370,"sku":"MAX-RODE51","price":818.39,"currency_code":"USD","in_stock":false},{"title":"5\/8\" x 250' With 25' 3\/8\" Chain","offer_id":50581816443138,"sku":"MAX-RODE60","price":1063.99,"currency_code":"USD","in_stock":true},{"title":"5\/8\" x 300' With 25' 5\/16\" Chain","offer_id":50581816475906,"sku":"MAX-RODE56","price":1126.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/Untitled-1__45901.1763741586_0071fcca-4be8-45f0-aa1b-54e0223ce467.webp?v=1791079104"},{"product_id":"maxwell-pm-12v-solenoid-pack","title":"Maxwell Windlass Pm Solenoid 12V (Sm Box) Ss To Sp5102","description":"\u003cp\u003eMaxwell PM 12V Solenoid Pack\u003c\/p\u003e\u003cp\u003eMaxwell Marine 12V heavy duty solenoid pack.\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Maxwell PM 12V Solenoid Pack? The Maxwell PM 12V Solenoid Pack is a heavy-duty 12-volt solenoid pack from Maxwell Marine. It is designed for applications requiring a 12V solenoid pack, with the product description specifically identifying it as a heavy-duty component.\u003c\/li\u003e\n\u003cli\u003eWhat voltage does the Maxwell PM 12V Solenoid Pack use? The Maxwell PM 12V Solenoid Pack is designed for 12-volt applications. Verify that your marine equipment or electrical system requires a 12V solenoid before purchasing or installing this component.\u003c\/li\u003e\n\u003cli\u003eIs the Maxwell PM 12V Solenoid Pack a heavy-duty component? Yes. The product description identifies the Maxwell PM 12V Solenoid Pack as a heavy-duty solenoid pack. No additional performance ratings, compatibility information, or application specifications are provided in the description.\u003c\/li\u003e\n\u003cli\u003eWhat should I verify before using the Maxwell PM 12V Solenoid Pack? Verify that your application requires a 12V solenoid pack and that the component is appropriate for your specific marine equipment. The supplied product description does not provide equipment compatibility, installation instructions, electrical ratings, or other fitment details, so consult the applicable equipment documentation before installation.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maxwell Windlass","offers":[{"title":"Default Title","offer_id":50581816606978,"sku":"MAX-SP5102","price":343.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/s__02175.1763741612.webp?v=1791079105"},{"product_id":"maxwell-sp5104-reversing-solenoid","title":"Maxwell Windlass Reversing Solenoid 12V Sw","description":"\u003cp\u003eMaxwell Marine SP5104 Reversing Solenoid 12V\u003c\/p\u003e\u003cp\u003eUsed in conjunction with remote up\/down panel, Auto Anchor™ 500C\/RC, roving hand held remote control and\/or foot switches to switch the motor in the required direction.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eDual direction solenoid\u003c\/p\u003e\u003cp\u003eHeavy-duty solenoids, rated at more than 200 amps continuous\u003c\/p\u003e\u003cp\u003eOptional ignition protected solenoids available\u003c\/p\u003e\u003cp\u003eSealed in a weather proof box\u003c\/p\u003e\u003cp\u003eInstallation in a dry area is always recommended\u003c\/p\u003e\u003cp\u003eFormerly part # P19045\u003c\/p\u003e\u003cp\u003eMaxwell Marine SP5104 Reversing Solenoid\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Maxwell Marine SP5104 Reversing Solenoid 12V used for? The Maxwell Marine SP5104 Reversing Solenoid 12V is used to switch a motor in the required direction. It is designed for use with a remote up\/down panel, Auto Anchor 500C\/RC, roving handheld remote control, and\/or foot switches.\u003c\/li\u003e\n\u003cli\u003eWhat type of solenoid is the Maxwell SP5104? The Maxwell SP5104 is a dual-direction solenoid designed to switch the motor between its required operating directions. Its heavy-duty solenoids are rated at more than 200 amps continuous.\u003c\/li\u003e\n\u003cli\u003eIs the Maxwell SP5104 Reversing Solenoid weatherproof? Yes. The Maxwell SP5104 is sealed in a weatherproof box. Despite the sealed enclosure, the product description recommends installing the solenoid in a dry area whenever possible.\u003c\/li\u003e\n\u003cli\u003eAre ignition-protected solenoids available for the Maxwell SP5104? Optional ignition-protected solenoids are available for the Maxwell SP5104. The supplied product description does not provide additional specifications or application details for the optional ignition-protected versions.\u003c\/li\u003e\n\u003cli\u003eWhat controls can be used with the Maxwell SP5104 Reversing Solenoid? The Maxwell SP5104 can be used in conjunction with a remote up\/down panel, Auto Anchor 500C\/RC, roving handheld remote control, and\/or foot switches. These controls are used to switch the motor in the required direction.\u003c\/li\u003e\n\u003cli\u003eWhat was the previous part number for the Maxwell SP5104? The Maxwell Marine SP5104 Reversing Solenoid 12V was formerly identified as part number P19045. Verify the part number and compatibility with your equipment before selecting this component.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maxwell Windlass","offers":[{"title":"Default Title","offer_id":50581816705282,"sku":"MAX-SP5104","price":359.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/Untitled-1__28125.1763741579_688c7c17-d1eb-4d56-9241-7a335b927c80.jpg?v=1791079106"}],"url":"https:\/\/allmarineworld.com\/collections\/maxwell-windlass.oembed","provider":"All Marine World","version":"1.0","type":"link"}