{"title":"Keel Guard","description":"\u003cp\u003eKeel Guard products currently published by All Marine World.\u003c\/p\u003e","products":[{"product_id":"megaware-scuffbuster-stainless-steel-bow-guard","title":"Keel Guard S.S. Bow Guard-Solid-02637","description":"\u003cp\u003eMegaware ScuffBuster Stainless Steel Bow Guard\u003c\/p\u003e\u003cp\u003eProtect your boat from trailer rollers with Megaware's ScuffBuster Stainless Steel Bow Guard. ScuffBuster attaches to your boat's surface to prevent scuffs and abrasion caused by trailer rollers. This bow guard is made from anti-corrosive, 22-gauge 304 stainless steel and attaches to your boat's surface with a 3M pressure-sensitive adhesive. Installation is easy, and ScuffBuster is backed by a one year limited manufacturer's warranty.\u003c\/p\u003e\u003cp\u003eSize: Standard - 5.75\" x 4.5\"\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eProtects your boat's gelcoat\u003c\/p\u003e\u003cp\u003eMinimize roller and trailer scuffs\u003c\/p\u003e\u003cp\u003eBend to conform to hull\u003c\/p\u003e\u003cp\u003eMirror polished finish\u003c\/p\u003e\u003cp\u003e1 Year warranty\u003c\/p\u003e\u003cp\u003eClick to Download Megaware ScuffBuster Installation Instructions\u003c\/p\u003e","brand":"Keel Guard","offers":[{"title":"Default Title","offer_id":50581845508354,"sku":"MKI-02637","price":26.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/MKI-02637_lg__84617.1619615366.webp?v=1791079294"},{"product_id":"keel-guard-self-adhesive-polymer-keel-protector","title":"Keel Guard Self Adhesive Polymer Keel Protector","description":"\u003cp\u003eMegaware Keel Guard Self Adhesive Polymer Boat Keel Protector\u003c\/p\u003e\u003cp\u003eThe Megaware Keel Guard protects your boat's hull from scrapes and cuts. Easy to install, this boat keep protector is available in a variety of colors and sizes. Keel Guard is constructed from a durable and shock absorbent polymer composite. While tough, Keel Guard is also very pliable to conform to the shape of any boat keel. During application, the keel protector’s contoured edge creates a clean, tight seal. Megaware Keel Guards use 3M adhesives which create strength, while permanently bonding and sealing the boat keel protector to the hull’s surface.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eProtect against abrasive sand, rocks, concrete ramps and oyster beds\u003c\/p\u003e\u003cp\u003eEliminate costly repairs\u003c\/p\u003e\u003cp\u003ePatented drag reduction design - will not slow your boat down\u003c\/p\u003e\u003cp\u003eUV-stabilized colors\u003c\/p\u003e\u003cp\u003eIncrease the value of your boat\u003c\/p\u003e\u003cp\u003eNo messy sealants needed\u003c\/p\u003e\u003cp\u003eManufacturer lifetime warranty\u003c\/p\u003e\u003cp\u003eMade in the USA\u003c\/p\u003e\u003cp\u003eKeel Guard Size Chart\u003c\/p\u003e\u003cp\u003eKeelGuard Size\u003c\/p\u003e\u003cp\u003eBoat Length\u003c\/p\u003e\u003cp\u003e5 ft\u003c\/p\u003e\u003cp\u003eup to 16 ft\u003c\/p\u003e\u003cp\u003e6 ft\u003c\/p\u003e\u003cp\u003eup to 18 ft\u003c\/p\u003e\u003cp\u003e7 ft\u003c\/p\u003e\u003cp\u003eup to 20 ft\u003c\/p\u003e\u003cp\u003e8 ft\u003c\/p\u003e\u003cp\u003eup to 22 ft\u003c\/p\u003e\u003cp\u003e9 ft\u003c\/p\u003e\u003cp\u003eup to 24 ft\u003c\/p\u003e\u003cp\u003eHow to Install a Boat Keel Guard\u003c\/p\u003e\u003cp\u003eThe Megaware KeelGuard is a very simple product to install; however, the following instructions must be strictly followed. Any short cuts or missed steps will jeopardize and compromise the full bonding capabilities of the 3M adhesive. For best results, the KeelGuard should be installed at an ambient temperature of 60º or above. Typically, the Megaware KeelGuard is mounted 4 to 6 inches above the waterline on the bow, ending 2 to 3 feet or more beyond the lowest point of the Keel. If protection is required above the Boweye, a separate Bow Guard is available in 1ft to 3ft lengths.\u003c\/p\u003e\u003cp\u003eEtch the surface where the Keel Guard will be installed.\u003c\/p\u003e\u003cp\u003eAny fiberglass mold release agents and wax must be removed.\u003c\/p\u003e\u003cp\u003eUse the included 3M Scotch-Brite pad.\u003c\/p\u003e\u003cp\u003eIf your boat has antifouling bottom paint applied, it must be removed to expose the original gelcoat where the Keel Guard will be installed.\u003c\/p\u003e\u003cp\u003eThoroughly clean the area with isopropyl alcohol.\u003c\/p\u003e\u003cp\u003eUse paper towels or a clean rag.\u003c\/p\u003e\u003cp\u003eRepeat until there is no sign of residue.\u003c\/p\u003e\u003cp\u003eDo not use paint thinner or other patroleum-based cleaners.\u003c\/p\u003e\u003cp\u003ePrime with the included 3M #94 Keel Primer\u003c\/p\u003e\u003cp\u003eApply a very thin coat of the included primer.\u003c\/p\u003e\u003cp\u003eFollow the instructions attached to the applicator.\u003c\/p\u003e\u003cp\u003eEnsure the entire area is primed, especially the edges.\u003c\/p\u003e\u003cp\u003eApply your Keel Guard\u003c\/p\u003e\u003cp\u003ePull back the center liner approximately 8-10 inches exposing the 3M adhesive.\u003c\/p\u003e\u003cp\u003eDo not touch the adhesive with your hands.\u003c\/p\u003e\u003cp\u003eCenter the Keel Guard along the keel and press it firmly in place using your hand or supplied burnishing tool.\u003c\/p\u003e\u003cp\u003eContinue to align the Keel Guard and peel back the center strip until the entire center is attached to the boat.\u003c\/p\u003e\u003cp\u003eStarting at the bow, pull back the protective liner on either side of the Keel Guard.\u003c\/p\u003e\u003cp\u003eBegin pressing it on with the burnishing tool.\u003c\/p\u003e\u003cp\u003eWork from the center out to ensure no air is trapped between the hull and adhesive.\u003c\/p\u003e\u003cp\u003eContinue working toward the rear until completed.\u003c\/p\u003e\u003cp\u003eRepeat the process for the other side.\u003c\/p\u003e\u003cp\u003eOnce fully attached, use the burnishing tool to apply additional pressure to the entire Keel Guard, ensuring it is firmly attached to your boat. A rubber mallet may also be used to apply even more force to the adhesive. No curing time is required.\u003c\/p\u003e\u003cp\u003eClick to Download Keel Guard Application Instructions\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Megaware Keel Guard Self Adhesive Polymer Boat Keel Protector designed to do? The Megaware Keel Guard protects a boat's hull and keel from scrapes and cuts caused by abrasive sand, rocks, concrete ramps, and oyster beds. It is made from a pliable, shock-absorbent polymer composite that conforms to the shape of the keel and uses 3M adhesive for permanent bonding.\u003c\/li\u003e\n\u003cli\u003eWhat size Megaware Keel Guard should I use for my boat? Megaware Keel Guard sizes are based on boat length. The 5-foo…\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Keel Guard","offers":[{"title":"5' Keel Guard, White","offer_id":50581845573890,"sku":"MKI-102W5","price":193.14,"currency_code":"USD","in_stock":true},{"title":"6' Keel Guard, Almond","offer_id":50581845606658,"sku":"MKI-102A6","price":217.14,"currency_code":"USD","in_stock":true},{"title":"6' Keel Guard, Black","offer_id":50581845639426,"sku":"MKI-102B6","price":217.14,"currency_code":"USD","in_stock":false},{"title":"6' Keel Guard, Blue","offer_id":50581845672194,"sku":"MKI-102BL6","price":217.14,"currency_code":"USD","in_stock":true},{"title":"6' Keel Guard, Gray","offer_id":50581845704962,"sku":"MKI-20506","price":217.14,"currency_code":"USD","in_stock":true},{"title":"6' Keel Guard, Light Gray","offer_id":50581845737730,"sku":"MKI-102LG6","price":217.14,"currency_code":"USD","in_stock":true},{"title":"6' Keel Guard, Red","offer_id":50581845770498,"sku":"MKI-102R6","price":217.14,"currency_code":"USD","in_stock":false},{"title":"6' Keel Guard, White","offer_id":50581845803266,"sku":"MKI-102W6","price":217.14,"currency_code":"USD","in_stock":true},{"title":"7' Keel Guard, Black","offer_id":50581845836034,"sku":"MKI-102B7","price":245.94,"currency_code":"USD","in_stock":false},{"title":"7' Keel Guard, Gray","offer_id":50581845868802,"sku":"MKI-20507","price":245.94,"currency_code":"USD","in_stock":true},{"title":"7' Keel Guard, White","offer_id":50581845901570,"sku":"MKI-102W7","price":245.94,"currency_code":"USD","in_stock":true},{"title":"8' Keel Guard, Black","offer_id":50581845934338,"sku":"MKI-102B8","price":271.14,"currency_code":"USD","in_stock":false},{"title":"8' Keel Guard, Gray","offer_id":50581845967106,"sku":"MKI-20508","price":271.14,"currency_code":"USD","in_stock":true},{"title":"8' Keel Guard, White","offer_id":50581845999874,"sku":"MKI-102W8","price":271.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/866639_source_1563382893.jpg?v=1791079296"},{"product_id":"skegguard-stainless-repair-protection","title":"Keel Guard SkegGuard Stainless Repair Protection","description":"\u003cp\u003eMegaware Skeg Guard Stainless Steel Skeg Repair\/Protection\u003c\/p\u003e\u003cp\u003eNot sure which SkegGuard fits your boat? See our application chart below or CLICK HERE to Download application chart\u003c\/p\u003e\u003cp\u003eMegaware SkegGuards deliver dependable protection for your outboard motor's skeg using marine-grade 316 stainless steel construction. The reinforced 3mm wear-tab shields against rocks, debris, and trailering damage while maintaining optimal performance. Installation takes just 10 minutes with basic tools - no marine technician required. These guards can be fitted over broken skegs with as little as 2 inches remaining, providing a cost-effective alternative to expensive welding repairs. The contoured design includes a strategic drain hole to prevent corrosion and freezing. Compatible with Mercury, Yamaha, Honda, Suzuki, and other major brands, each SkegGuard features self-locking hardware and comes backed by a three-year warranty.\u003c\/p\u003e\u003cp\u003eKey Features:\u003c\/p\u003e\u003cp\u003eMade from mirror-polished, marine grade 316 stainless steel.\u003c\/p\u003e\u003cp\u003eThickened lower wear tab reduces ramp dragging and is ideal for river-running.\u003c\/p\u003e\u003cp\u003eThe drain hole prevents corrosion\/freezing for longer wear.\u003c\/p\u003e\u003cp\u003eInnovations will not compromise skeg performance.\u003c\/p\u003e\u003cp\u003eDoes not require a marine technician to install.\u003c\/p\u003e\u003cp\u003eMay be implemented with 2-3 inches of skeg remaining.\u003c\/p\u003e\u003cp\u003eThree-year warranty.\u003c\/p\u003e\u003cp\u003eSkeg Guard Installation Instructions:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSecured with self-locking hardware, installation takes less than 10 minutes. If your skeg is already broken, Megaware's SkegGuard can be installed with as little as 2 inches of skeg remaining.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eUsing a mallet (leather, rubber, or wooden), place the Megaware SkegGuard on the skeg and gently tap on it. Once in place, drive it on with the mallet until fully seated.\u003c\/p\u003e\u003cp\u003eUsing the two pre-drilled mounting holes in the SkegGuard as pilot holes, drill the skeg using a 1\/4\" drill bit.\u003c\/p\u003e\u003cp\u003eInstall the stainless steel hardware using the hex-key tools supplied with the product.\u003c\/p\u003e\u003cp\u003eMegaware SkegGuard Application Guide\u003c\/p\u003e\u003cp\u003eMegaware's SkegGuard is available in models to fit virtually any skeg. Models for motors include Mercury, Mariner, Evinrude, Johnson, Honda, Nissan, OMC, Tohatsu, Suzuki, Volvo, and Yamaha.\u003c\/p\u003e\u003cp\u003eJOHNSON - Does not fit Lightning Gearcase\u003c\/p\u003e\u003cp\u003e27101 - 100, 115, 120, 140 1980 - 2001\u003c\/p\u003e\u003cp\u003eEVINRUDE\/JOHNSON - Does not fit Lightning Gearcase\u003c\/p\u003e\u003cp\u003e27131 - 40, 50, 55, 60 2 Stroke E-TEC 2004-Present; 60 1996 - 2012\u003c\/p\u003e\u003cp\u003e27121 - 65 2 Stroke E-TEC 2013 - 2015\u003c\/p\u003e\u003cp\u003e27121 - 75, 90,115, 130 2 Stroke E-TEC 20\" Shaft 2006 - Present\u003c\/p\u003e\u003cp\u003e27081 - 90, 115, 130 E-TEC 25\"-30\" Shaft 2006 - Present\u003c\/p\u003e\u003cp\u003e27081 - 150, 175, 200 20\" Shaft E-TEC 2006 - Present\u003c\/p\u003e\u003cp\u003e27091 - 135, 175, 200 25\"-30\" Shaft E-TEC 2 Stroke 2006 - 2014\u003c\/p\u003e\u003cp\u003e27091 - 150 25\"-30\" Shaft E-TEC 2006 - Present\u003c\/p\u003e\u003cp\u003e27091 - 225, 250, 300 E-TEC 2002 - 2014\u003c\/p\u003e\u003cp\u003e27281 - 150, 175, 200, 225, 250, 300 E-TEC G2 (Curved) 2015 - Present\u003c\/p\u003e\u003cp\u003eHONDA\u003c\/p\u003e\u003cp\u003e27171 - 35, 40, 45, 50 4 Stroke 1991 - Present\u003c\/p\u003e\u003cp\u003e27171 - 90 4 Stroke \u0026amp; V-TEC 2008 - Present\u003c\/p\u003e\u003cp\u003e27071 - 60, 75 4 Stroke 2010 - Present\u003c\/p\u003e\u003cp\u003e27071 - 75, 90, 115 4 Stroke 1995 - 2007\u003c\/p\u003e\u003cp\u003e27271 - 115 4 Stroke 2010 - Present\u003c\/p\u003e\u003cp\u003e27271 - 135, 150, 200, 225 4 Stroke 2004 - Present\u003c\/p\u003e\u003cp\u003eMARINER\u003c\/p\u003e\u003cp\u003e27341 - 40, 50, 60 2 \u0026amp; 4 Stroke 2003 - 2011\u003c\/p\u003e\u003cp\u003e27071 - 50, 60 Bigfoot 2003 - 2011\u003c\/p\u003e\u003cp\u003e27071 - 70, 90, 100, 115, 125 2\/4 Stroke \u0026amp; Optimax 1983 - 2011\u003c\/p\u003e\u003cp\u003e27211 - 150, 175, 200, 225, 250, 275, 300 Verado 2005 - 2011\u003c\/p\u003e\u003cp\u003e27061 - 135, 150, 175, 200 Optimax 2 Stroke 1978 - 2011\u003c\/p\u003e\u003cp\u003e27061 - 135, 150, 175, 200 4 Stroke 2005 - 2011\u003c\/p\u003e\u003cp\u003eMERCURY\u003c\/p\u003e\u003cp\u003e27021 MERCRUISER - Alpha I 1985 - 1990\u003c\/p\u003e\u003cp\u003e27031 MERCRUISER - Alpha I Generation II 1991 - Present\u003c\/p\u003e\u003cp\u003e27051 MERCRUISER - Bravo I \u0026amp; III 1990 - Present\u003c\/p\u003e\u003cp\u003e27011 MERCRUISER - Pre-Alpha I Drives 1973 - 1984\u003c\/p\u003e\u003cp\u003e27071 - 40, 50, 60 Bigfoot 2001 - 2013\u003c\/p\u003e\u003cp\u003e27071 - 40, 50, 60 Command Thrust 2014 - Present\u003c\/p\u003e\u003cp\u003e27071 - 50 4 Stroke 2006 - 2014\u003c\/p\u003e\u003cp\u003e27071 - 75, 90, 115 2\/4 Stroke \u0026amp; Optimax 2003 - 2014\u003c\/p\u003e\u003cp\u003e27071 - 125 2 Stroke 2000 - …\u003c\/p\u003e","brand":"Keel Guard","offers":[{"title":"27011","offer_id":50581846130946,"sku":"MKI-27011","price":137.94,"currency_code":"USD","in_stock":true},{"title":"27021 - Mercruiser Alpha 1 1985-1990","offer_id":50581846163714,"sku":"MKI-27021","price":137.94,"currency_code":"USD","in_stock":true},{"title":"27031 - Mercruiser Alpha 1 Generation II 1991-Present","offer_id":50581846196482,"sku":"MKI-27031","price":151.14,"currency_code":"USD","in_stock":false},{"title":"27051 - Mercruiser Bravo 1, III 1990-Present","offer_id":50581846229250,"sku":"MKI-27051","price":151.14,"currency_code":"USD","in_stock":false},{"title":"27061 - Mercury Outboards","offer_id":50581846262018,"sku":"MKI-27061","price":151.14,"currency_code":"USD","in_stock":true},{"title":"27071 - Evinrude, Force, Honda, Mercury, Nissan, Yamaha","offer_id":50581846294786,"sku":"MKI-27071","price":151.14,"currency_code":"USD","in_stock":true},{"title":"27081 - OMC Cobra, Evinrude, Suzuki","offer_id":50581846327554,"sku":"MKI-27081","price":151.14,"currency_code":"USD","in_stock":true},{"title":"27101 - Evinrude, OMC Cobra","offer_id":50581846360322,"sku":"MKI-27101","price":151.14,"currency_code":"USD","in_stock":false},{"title":"27151 - Suzuki, Yamaha","offer_id":50581846393090,"sku":"MKI-27151","price":151.14,"currency_code":"USD","in_stock":true},{"title":"27171 - Mercury, Honda, Force, NIssan, Suzuki, Yamaha","offer_id":50581846425858,"sku":"MKI-27171","price":151.14,"currency_code":"USD","in_stock":true},{"title":"27181 - Force","offer_id":50581846458626,"sku":"MKI-27181","price":151.14,"currency_code":"USD","in_stock":true},{"title":"27191 - Volvo","offer_id":50581846491394,"sku":"MKI-27191","price":151.14,"currency_code":"USD","in_stock":true},{"title":"27211 - Mercury, Mariner","offer_id":50581846524162,"sku":"MKI-27211","price":151.14,"currency_code":"USD","in_stock":false},{"title":"27221 - Volvo","offer_id":50581846556930,"sku":"MKI-27221","price":151.14,"currency_code":"USD","in_stock":true},{"title":"27261 - Evinrude, Suzuki","offer_id":50581846589698,"sku":"MKI-27261","price":151.14,"currency_code":"USD","in_stock":true},{"title":"27271 - Honda","offer_id":50581846622466,"sku":"MKI-27271","price":151.14,"currency_code":"USD","in_stock":true},{"title":"27291 - Yamaha","offer_id":50581846655234,"sku":"MKI-27291","price":151.14,"currency_code":"USD","in_stock":true},{"title":"27301 - Yamaha","offer_id":50581846688002,"sku":"MKI-27301","price":151.14,"currency_code":"USD","in_stock":true},{"title":"27321 - Evinrude, Yamaha","offer_id":50581846720770,"sku":"MKI-27321","price":151.14,"currency_code":"USD","in_stock":true},{"title":"27331 - Yamaha","offer_id":50581846753538,"sku":"MKI-27331","price":151.14,"currency_code":"USD","in_stock":false},{"title":"27341 - Evinrude, Mercury","offer_id":50581846786306,"sku":"MKI-27341","price":151.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/SkegGuard__74788.1739460431.webp?v=1791079298"},{"product_id":"megawear-pontoonguard-for-pontoons-21-25ft","title":"Keel Guard Megawear PontoonGuard for Pontoons 21-25ft.","description":"\u003cp\u003eMegawear PontoonGuard for Pontoons 21-25ft.\u003c\/p\u003e\u003cp\u003eProtect your Pontoon from scratches and scrapes with a Megaware PontoonGuard! The PontoonGuard provides protection to the side of the tubes against abrasion an chafing caused by docks, other pontoons, and hidden obstacles. Not only does a PontoonGuard provide protection, but it also features a 3M reflective strip to enhance the visibility of the pontoon in nighttime or low-light conditions when illuminated by a light source such as headlights or search lights.\u003c\/p\u003e\u003cp\u003eKey Features:\u003c\/p\u003e\u003cp\u003eProtect Vulnerable and Exposed Areas of your Pontoon\u003c\/p\u003e\u003cp\u003eMake Your Vessel more visible during night operations or while anchored or beached\u003c\/p\u003e\u003cp\u003eAvoid unsightly dents and scrapes from docking your pontoon\u003c\/p\u003e\u003cp\u003eAdd a custom sleek look to your pontoon\u003c\/p\u003e\u003cp\u003eSuper strong 1\/4\" thick ultra-tough polymer composite\u003c\/p\u003e\u003cp\u003eMachined contoured leading edge\u003c\/p\u003e\u003cp\u003eContoured sides for clean, tight seal (no sealants needed)\u003c\/p\u003e\u003cp\u003e3M Reflective strip for increased visibility and safety\u003c\/p\u003e\u003cp\u003eIncluded:\u003c\/p\u003e\u003cp\u003e(2) 20 ft. PontoonGuards\u003c\/p\u003e\u003cp\u003eBurnishing tool\u003c\/p\u003e\u003cp\u003e3M Scotch-Brite\u003c\/p\u003e\u003cp\u003eThree year adhesion warranty\u003c\/p\u003e\u003cp\u003eInstallation Instructions:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIt is recommended that the adhesive is not applied when temperatures are below 65 degrees F or above 100 degrees F. Remember that even if the air temperature is above 65 degrees F, the aluminum surface on your pontoon may be lower.\u003c\/li\u003e\n\u003cli\u003eWash - Thoroughly wash your pontoon to remove any algae or oxidization. Remove any waxes or metal protectants as per manufacturer recommendations. Clean the area where the PontoonGuard will be installed with isopropyl (rubbing) alcohol.\u003c\/li\u003e\n\u003cli\u003eMeasure - Measure the length of the pontoon tube. If the PontoonGuard is too long, trim the PontoonGuard with a utility knife on the rear squared edge for a precise fit. Measure down from the top deck to the find the center of your pontoon. Once you have found the center, measure up 1.75\" and make a mark using a pencil. This is where the top of the PontoonGuard will be installed. Measure down from the center 1.75\" to mark the bottom of the guard. Continue to measure and mark every 18-24\" down the length of the tube.\u003c\/li\u003e\n\u003cli\u003eMask - Align a strip fo masking tape along the top marks and continue down the entire length of the pontoon. Repeat using the lower marks. Verify that the spacing between the masking tape is 3.5 inches and that the alignment is straight.\u003c\/li\u003e\n\u003cli\u003eEtch - Using the provided 3M Scotch-Brite Pad, thoroughly etch the entire length of the pontoon within the masked area.\u003c\/li\u003e\n\u003cli\u003eClean - Thoroughly clean the area again with isopropyl alcohol, using paper towels or a clean rag. Repeat until the rag or paper towel show no signs of residue. Note: Do not use paint thinner or other petroleum based cleaners as they can leave a film that will compromise the bond of the 3M adhesive.\u003c\/li\u003e\n\u003cli\u003eApply - Pull back 8-10\" of each of the 3 red protective liners from the front of the guard. Do not touch the adhesive with your hands, as any contamination may compromise the bond. Carefully align the PontoonGuard with the masking tape and press it firmly in place using your hand or the supplied burnishing tool. NOTE: Once the adhesive touches the surface it will become a permanent bond and will not release without tearing the adhesive)Continue to align the PontoonGuard until the entire guard is installed. Once fully attached, use the burnishing tool to apply additional pressure to the entire PontoonGuard, ensuring the pressure sensative adhesive is firmly attached.\u003c\/li\u003e\n\u003cli\u003eTo keep your PontoonGuard looking new, clean with mild soap and water.If you wish to reapply any metal protectants or clean the tubes using acid based or chemical cleaners, the PontoonGuard must be masked to protect the finish and reflective film.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Keel Guard","offers":[{"title":"Black","offer_id":50581846851842,"sku":"MKI-30240","price":577.14,"currency_code":"USD","in_stock":false},{"title":"Gray","offer_id":50581846884610,"sku":"MKI-30540","price":577.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/429232_source_1481565822_116a56c6-5aed-47ee-8ebf-47ec7e82c77d.jpg?v=1791079299"},{"product_id":"megawear-pontoonguard-for-pontoons-up-to-21-ft","title":"Keel Guard 32' Pontoonguard (2-16') Gray","description":"\u003cp\u003ePontoonGuard for Pontoons Up To 21 ft.\u003c\/p\u003e\u003cp\u003eProtect your Pontoon from scratches and scrapes with a Megaware PontoonGuard! The PontoonGuard provides protection to the side of the tubes against abrasion an chafing caused by docks, other pontoons, and hidden obstacles. Not only does a PontoonGuard provide protection, but it also features a 3M reflective strip to enhance the visibility of the pontoon in nighttime or low-light conditions when illuminated by a light source such as headlights or search lights.\u003c\/p\u003e\u003cp\u003eKey Features:\u003c\/p\u003e\u003cp\u003eProtect Vulnerable and Exposed Areas of your Pontoon\u003c\/p\u003e\u003cp\u003eMake Your Vessel more visible during night operations or while anchored or beached\u003c\/p\u003e\u003cp\u003eAvoid unsightly dents and scrapes from docking your pontoon\u003c\/p\u003e\u003cp\u003eAdd a custom sleek look to your pontoon\u003c\/p\u003e\u003cp\u003eSuper strong 1\/4\" thick ultra-tough polymer composite\u003c\/p\u003e\u003cp\u003eMachined contoured leading edge\u003c\/p\u003e\u003cp\u003eContoured sides for clean, tight seal (no sealants needed)\u003c\/p\u003e\u003cp\u003e3M Reflective strip for increased visibility and safety\u003c\/p\u003e\u003cp\u003eIncluded:\u003c\/p\u003e\u003cp\u003e(2) 16 ft. PontoonGuards\u003c\/p\u003e\u003cp\u003eBurnishing tool\u003c\/p\u003e\u003cp\u003e3M Scotch-Brite\u003c\/p\u003e\u003cp\u003eThree year adhesion warranty\u003c\/p\u003e\u003cp\u003eInstallation Instructions:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIt is recommended that the adhesive is not applied when temperatures are below 65 degrees F or above 100 degrees F. Remember that even if the air temperature is above 65 degrees F, the aluminum surface on your pontoon may be lower.\u003c\/li\u003e\n\u003cli\u003eWash - Thoroughly wash your pontoon to remove any algae or oxidization. Remove any waxes or metal protectants as per manufacturer recommendations. Clean the area where the PontoonGuard will be installed with isopropyl (rubbing) alcohol.\u003c\/li\u003e\n\u003cli\u003eMeasure - Measure the length of the pontoon tube. If the PontoonGuard is too long, trim the PontoonGuard with a utility knife on the rear squared edge for a precise fit. Measure down from the top deck to the find the center of your pontoon. Once you have found the center, measure up 1.75\" and make a mark using a pencil. This is where the top of the PontoonGuard will be installed. Measure down from the center 1.75\" to mark the bottom of the guard. Continue to measure and mark every 18-24\" down the length of the tube.\u003c\/li\u003e\n\u003cli\u003eMask - Align a strip fo masking tape along the top marks and continue down the entire length of the pontoon. Repeat using the lower marks. Verify that the spacing between the masking tape is 3.5 inches and that the alignment is straight.\u003c\/li\u003e\n\u003cli\u003eEtch - Using the provided 3M Scotch-Brite Pad, thoroughly etch the entire length of the pontoon within the masked area.\u003c\/li\u003e\n\u003cli\u003eClean - Thoroughly clean the area again with isopropyl alcohol, using paper towels or a clean rag. Repeat until the rag or paper towel show no signs of residue. Note: Do not use paint thinner or other petroleum based cleaners as they can leave a film that will compromise the bond of the 3M adhesive.\u003c\/li\u003e\n\u003cli\u003eApply - Pull back 8-10\" of each of the 3 red protective liners from the front of the guard. Do not touch the adhesive with your hands, as any contamination may compromise the bond. Carefully align the PontoonGuard with the masking tape and press it firmly in place using your hand or the supplied burnishing tool. NOTE: Once the adhesive touches the surface it will become a permanent bond and will not release without tearing the adhesive)Continue to align the PontoonGuard until the entire guard is installed. Once fully attached, use the burnishing tool to apply additional pressure to the entire PontoonGuard, ensuring the pressure sensative adhesive is firmly attached.\u003c\/li\u003e\n\u003cli\u003eTo keep your PontoonGuard looking new, clean with mild soap and water.If you wish to reapply any metal protectants or clean the tubes using acid based or chemical cleaners, the PontoonGuard must be masked to protect the finish and reflective film.\u003c\/li\u003e\n\u003cli\u003eFrequently Asked Questions\u003c\/li\u003e\n\u003cli\u003eWhat does the Megaware PontoonGuard for Pontoons Up To 21 ft. do? The Megaware PontoonGuard helps protect the sides of pontoon tubes from scratches, scrapes, abrasion, and chafing caused by docks, other pontoons, and hidden obstacles. It…\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Keel Guard","offers":[{"title":"Default Title","offer_id":50581847015682,"sku":"MKI-30532","price":479.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/429229_source_1481565425.jpg?v=1791079301"},{"product_id":"megaware-skegpro-skeg-protector","title":"Keel Guard Megaware SkegPro Skeg Protector","description":"\u003cp\u003eMegaware SkegPro Skeg Protector\u003c\/p\u003e\u003cp\u003eThe Megaware SkegPro protects your motor's skeg against harsh marine environments. It conforms to your lower unit to ensure there is no discernible drag or compromise in performance. A drain hole keeps water from collecting and remaining stagnant, which could cause corrosion or freezing. SkegPro's mirror-polished finish creates a custom look and lasting protection. Megaware's SkegPro is easy to install and can be done in minutes.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eMirror polished finish\u003c\/p\u003e\u003cp\u003eProtects against ramp dragging, rocks, debris, and submerged objects\u003c\/p\u003e\u003cp\u003eDrain hole prevents corrosion and freezing\u003c\/p\u003e\u003cp\u003eDo-it-yourself installation takes less than 10 minutes\u003c\/p\u003e\u003cp\u003eThree year warranty\u003c\/p\u003e\u003cp\u003eHow to Install Megaware SkegPro Skeg Protector\u003c\/p\u003e\u003cp\u003eIf needed, repair skeg to ensure proper fit before installing SkegPro.\u003c\/p\u003e\u003cp\u003eTo enhance appearance, prime and paint skeg before installing the SkegPro.\u003c\/p\u003e\u003cp\u003eUsing a leather, rubber, or wooden mallet, place the SkegPro on the skeg and gently tap on it to get it started.\u003c\/p\u003e\u003cp\u003eDrive it on with the mallet until fully seated.\u003c\/p\u003e\u003cp\u003eUsing the pre-drilled mounting hole as a pilot hole, drill the skeg using a 3\/16\" drill bit.\u003c\/p\u003e\u003cp\u003eInstall the stainless steel hardware.\u003c\/p\u003e\u003cp\u003eMegaware SkegPro Application Guide\u003c\/p\u003e\u003cp\u003eEvinrude\/Johnson\u003c\/p\u003e\u003cp\u003e665 - 115 HP 200 - up\u003c\/p\u003e\u003cp\u003e667 - 200 HP High Output 2003-2007\u003c\/p\u003e\u003cp\u003eHonda\u003c\/p\u003e\u003cp\u003e665 - BF 50 HP 2008\u003c\/p\u003e\u003cp\u003eMercruiser\u003c\/p\u003e\u003cp\u003e667 - Bravo One 1992 - up\u003c\/p\u003e\u003cp\u003e667 - Bravo Three 1992 - up\u003c\/p\u003e\u003cp\u003e668 - Bravo Two 1994 - up\u003c\/p\u003e\u003cp\u003eMercury\u003c\/p\u003e\u003cp\u003e665 - 15 HP Big Foot 4 Stroke 2003 - up\u003c\/p\u003e\u003cp\u003e665 - 25 HP Big Foot 4 Stroke 1998 - up\u003c\/p\u003e\u003cp\u003e665 - 40, 50 HP 1995 - up\u003c\/p\u003e\u003cp\u003e665 - 60 HP 4 Stroke + EFI\u003c\/p\u003e\u003cp\u003eYamaha\u003c\/p\u003e\u003cp\u003e665 - 40, 50, 60 HP 4 Stroke (does not fit lower HP)\u003c\/p\u003e\u003cp\u003e667 - VMAX 250 HPDI 2003\u003c\/p\u003e\u003cp\u003eClick to Download Megaware SkegPro Installation Instructions\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat does the Megaware SkegPro Skeg Protector do? The Megaware SkegPro Skeg Protector helps protect a motor's skeg from ramp dragging, rocks, debris, submerged objects, and harsh marine environments. Its mirror-polished finish provides a custom look, while the drain hole helps prevent water from collecting and remaining stagnant, which could contribute to corrosion or freezing.\u003c\/li\u003e\n\u003cli\u003eWhich engines and lower units is the Megaware SkegPro designed to fit? The application guide lists specific Evinrude\/Johnson, Honda, Mercruiser, Mercury, and Yamaha applications. Fitments include select horsepower ranges and models such as Mercruiser Bravo One, Bravo Two, and Bravo Three, Mercury Big Foot and 40–60 HP applications, and Yamaha 40–60 HP 4-stroke models. Verify your specific application before installation.\u003c\/li\u003e\n\u003cli\u003eHow do you install the Megaware SkegPro Skeg Protector? If necessary, repair the skeg to ensure proper fit. Place the SkegPro onto the skeg and gently start it using a leather, rubber, or wooden mallet, then drive it fully into position. Use the pre-drilled mounting hole as a pilot hole, drill with a 3\/16-inch bit, and install the stainless steel hardware.\u003c\/li\u003e\n\u003cli\u003eHow long does it take to install the Megaware SkegPro? The product description states that the do-it-yourself installation takes less than 10 minutes. The installation process includes seating the protector with a mallet, drilling a 3\/16-inch pilot hole through the skeg using the pre-drilled mounting hole, and installing the stainless steel hardware.\u003c\/li\u003e\n\u003cli\u003eDoes the Megaware SkegPro have a drain hole? Yes. The Megaware SkegPro has a drain hole designed to prevent water from collecting and remaining stagnant inside the protector. According to the product description, this helps prevent conditions that could cause corrosion or freezing.\u003c\/li\u003e\n\u003cli\u003eWhat should I do to prepare the skeg before installing the Megaware SkegPro? If needed, repair the skeg to ensure proper fit before installing the SkegPro. The installation instructions also recommend priming and painting the skeg before installation if you want to enhance its appearance. The SkegPro is then seated onto the sk…\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Keel Guard","offers":[{"title":"40-50","offer_id":50581847572738,"sku":"MKI-665","price":91.14,"currency_code":"USD","in_stock":true},{"title":"667 - Mercruiser Bravo I \u0026 III","offer_id":50581847605506,"sku":"MKI-667","price":91.14,"currency_code":"USD","in_stock":true},{"title":"668 - Mercruier Bravo II","offer_id":50581847638274,"sku":"MKI-668","price":91.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/SkegPro__40590.1739462841_d4329314-df42-44f8-8f4f-fc5c32fae5f6.webp?v=1791079301"},{"product_id":"megaware-flexstep-pro-adjustable-trailer-step","title":"Keel Guard FLEX STEP PRO","description":"\u003cp\u003eMegaware FlexStep Pro Adjustable Trailer Step\u003c\/p\u003e\u003cp\u003eThe Megaware FlexStep Pro is an innovative multi-angle, extendable step system that attaches to your trailer frame. This convenient step makes boating easier by allowing easy access to virtually anywhere on your boat. A quick, spring loaded pull handle and locking pin system adjusts the Megaware FlexStep Pro to 16 positions for maximum reach. Additionally, the FlexStep Pro can extend from 17 to 21 inches for those harder to reach areas. The Megaware FlexStep Pro fits most trailer rails and mounts in minutes using only four bolts. The FlexStep Pro easily disconnects with a single pin for safe storage during travel. This adjustable step is manufactured from lightweight, high tensile 6063-T6 anodized aluminum, ensuring the highest quality. The FlexStep Pro is designed to safely hold up to 300 lbs.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003e16 Adjustable positions\u003c\/p\u003e\u003cp\u003eExtends from 17 to 21 inches\u003c\/p\u003e\u003cp\u003eRemovable for safe travel and stowing\u003c\/p\u003e\u003cp\u003eFits most trailer rails (2-3\" x up to 4\" wide)\u003c\/p\u003e\u003cp\u003eAnodized aluminum construction\u003c\/p\u003e\u003cp\u003eHow to Install a Megaware FlexStep Pro\u003c\/p\u003e\u003cp\u003eThe Megaware FlexStep Pro comes with included hardware designed for mounting to any boat trailer with frames up to 3\" deep. If your trailer frame is larger, you will need to purchase longer bolts separately.\u003c\/p\u003e\u003cp\u003ePlace the base mount on the trailer frame in the location of your choice.\u003c\/p\u003e\u003cp\u003eTake the four bolts and place them through the mounting plate and align with trailer frame.\u003c\/p\u003e\u003cp\u003eProtective sleeves are provided to sheath the bolts to prevent trailer scratches.\u003c\/p\u003e\u003cp\u003ePlace the backing plate on the back or rear side of the trailer frame and align the four bolts through the corresponding holes.\u003c\/p\u003e\u003cp\u003eApply a washer over the end of the bolt and attach the nylon lock nut.\u003c\/p\u003e\u003cp\u003eSecure evenly with firm pressure. Do not over tighten.\u003c\/p\u003e\u003cp\u003eClick to Download Megaware FlexStep Pro Installation Instructions\u003c\/p\u003e","brand":"Keel Guard","offers":[{"title":"Default Title","offer_id":50581847736578,"sku":"MKI-80011","price":211.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/FlexStep-Pro.4__47194.1739462843.webp?v=1791079302"},{"product_id":"scuffbuster-stainless-steel-bow-guard-xl","title":"Keel Guard S.S. Bow Guard\"Xl\"-Solid-80637","description":"\u003cp\u003eScuffBuster Stainless Steel Bow Guard - XL\u003c\/p\u003e\u003cp\u003eProtect your boat from unsightly marring with the ScuffBuster Stainless Steel Bow Guard. Made from anti-corrosive, 22-gauge 304 stainless steel, ScuffBuster products attach to your boat's surface with the highest quality materials and 3M pressure-sensative adhesives.\u003c\/p\u003e\u003cp\u003eOne Year Limited Warranty\u003c\/p\u003e","brand":"Keel Guard","offers":[{"title":"Default Title","offer_id":50581847867650,"sku":"MKI-80637","price":50.34,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/80637__27871.1558183660_08bda614-8b2f-44b8-9830-f4a02186da1b.jpg?v=1791079303"},{"product_id":"megaware-scuffbuster-stainless-steel-bow-guard-w-notch","title":"Keel Guard S.S. Bow Guard-Notched-02638","description":"\u003cp\u003eMegaware ScuffBuster Stainless Steel Bow Guard with Notch\u003c\/p\u003e\u003cp\u003eProtect your boat from trailer rollers with Megaware's ScuffBuster Stainless Steel Bow Guard. ScuffBuster attaches to your boat's surface to prevent scuffs and abrasion caused by trailer rollers. This bow guard is made from anti-corrosive, 22-gauge 304 stainless steel and attaches to your boat's surface with a 3M pressure-sensitive adhesive. Installation is easy, and ScuffBuster is backed by a one year limited manufacturer's warranty.\u003c\/p\u003e\u003cp\u003eSize: Standard with Notch - 5.75\" x 4.5\"\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eProtects your boat's gelcoat\u003c\/p\u003e\u003cp\u003eMinimize roller and trailer scuffs\u003c\/p\u003e\u003cp\u003eBend to conform to hull\u003c\/p\u003e\u003cp\u003eMirror polished finish\u003c\/p\u003e\u003cp\u003e1 Year warranty\u003c\/p\u003e\u003cp\u003eClick to Download ScuffBuster Application Instructions\u003c\/p\u003e","brand":"Keel Guard","offers":[{"title":"Default Title","offer_id":50581847900418,"sku":"MKI-SB02638","price":26.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/MKI-SB02638_lg__49466.1619615651_b52747a0-90f9-4ea5-a646-a0fc311096b0.jpg?v=1791079305"}],"url":"https:\/\/allmarineworld.com\/collections\/keel-guard.oembed","provider":"All Marine World","version":"1.0","type":"link"}