{"title":"Interlux Paint","description":"\u003cp\u003eInterlux Paint products currently published by All Marine World.\u003c\/p\u003e","products":[{"product_id":"interlux-interstain-wood-filler-stain","title":"Interlux Paint Interstain Wood Filler Stain","description":"\u003cp\u003eInterlux Interstain Wood Filler Stain\u003c\/p\u003e\u003cp\u003eInterlux Interstain fills the grain of the wood so that the number of coats of varnish can be reduced and it stains the wood to enhance its natural beauty.\u003c\/p\u003e\u003cp\u003eFills wood grain\u003c\/p\u003e\u003cp\u003eStains the wood to enhance its beauty\u003c\/p\u003e\u003cp\u003eA great base for Interlux varnishes\u003c\/p\u003e\u003cp\u003eSold in pints\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eFinish: Matte\u003c\/p\u003e\u003cp\u003eNumber of Coats: As required\u003c\/p\u003e\u003cp\u003eApplication Method: Brush\u003c\/p\u003e\u003cp\u003eInterlux Brush Thinner: Thinner.\u003c\/p\u003e\u003cp\u003eInterlux Interstain is a thick paste before using. It must be mixed with thinner to the consistency of thick house paint.\u003c\/p\u003e\u003cp\u003eColors Available:\u003c\/p\u003e\u003cp\u003eBrown Mahogany\u003c\/p\u003e\u003cp\u003eRed Mahogany\u003c\/p\u003e\u003cp\u003eCC Red Mahogany\u003c\/p\u003e\u003cp\u003e***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***\u003c\/p\u003e\u003cp\u003eHow to Apply\u003c\/p\u003e\u003cp\u003eMSDS\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is Interlux Interstain Wood Filler Stain used for? Interlux Interstain Wood Filler Stain is designed to fill the grain of wood while staining the surface to enhance its natural appearance. It also provides a base for Interlux varnishes and can help reduce the number of varnish coats needed.\u003c\/li\u003e\n\u003cli\u003eHow should Interlux Interstain be prepared before application? Interlux Interstain is a thick paste before use and must be mixed with Interlux Brush Thinner. Add thinner until the product reaches the consistency of thick house paint before applying it to the wood.\u003c\/li\u003e\n\u003cli\u003eHow is Interlux Interstain Wood Filler Stain applied? Interlux Interstain is applied by brush. The number of coats should be determined as required for the application. Follow the product preparation instructions and use Interlux Brush Thinner to achieve the recommended consistency before application.\u003c\/li\u003e\n\u003cli\u003eCan Interlux Interstain be used as a base for varnish? Yes. Interlux Interstain is designed to provide a suitable base for Interlux varnishes. By filling the wood grain and staining the surface, it prepares the wood for subsequent varnish application while enhancing the natural appearance of the material.\u003c\/li\u003e\n\u003cli\u003eWhat colors are available for Interlux Interstain Wood Filler Stain? Interlux Interstain Wood Filler Stain is available in Brown Mahogany, Red Mahogany, and CC Red Mahogany. The product has a matte finish and is sold in pint containers.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Interlux Paint","offers":[{"title":"Brown","offer_id":50581704605954,"sku":"ILX-42P","price":47.99,"currency_code":"USD","in_stock":true},{"title":"CC Red Mahogany","offer_id":50581704638722,"sku":"ILX-573P","price":48.99,"currency_code":"USD","in_stock":true},{"title":"Red Mahogany","offer_id":50581704671490,"sku":"ILX-1579P","price":47.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/Interstain__34456.1722363388_c74e533f-d57b-4ec4-8b3c-36d72508c343.webp?v=1791078356"},{"product_id":"interlux-high-gloss-yacht-enamel-white","title":"Interlux Paint High Gloss White","description":"\u003cp\u003eInterlux High Gloss White Yacht Enamel\u003c\/p\u003e\u003cp\u003eInterlux Yacht Enamel is a fast drying, high quality topside finish. It has excellent adhesion to properly prepared surfaces and superior hiding characteristics. Easy to apply by brush, roller, conventional spray and airless spray. Interlux Yacht Enamel is ideal for use above the true waterline for hullsides, decks, boottops and fasion stripes. Bright, high gloss finish allows the natural beauty of wood to show through.\u003c\/p\u003e\u003cp\u003eGreat color and gloss retention\u003c\/p\u003e\u003cp\u003eTraditional alkyd-based marine enamel\u003c\/p\u003e\u003cp\u003eBright, high gloss finish\u003c\/p\u003e\u003cp\u003eExcellent flow and leveling properties\u003c\/p\u003e\u003cp\u003eSold in quarts\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eColor: White\u003c\/p\u003e\u003cp\u003eFinish: High Gloss\u003c\/p\u003e\u003cp\u003eCoverage: 550 ft²\/gal. by brush\u003c\/p\u003e\u003cp\u003eNumber of Coats: 2-3 minimum\u003c\/p\u003e\u003cp\u003eThinners:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInterlux Brush Thinner: Thinning for brush application \u0026amp; clean-up\u003c\/li\u003e\n\u003cli\u003eInterlux Special Thinner: Thinning for spray application \u0026amp; clean-up\u003c\/li\u003e\n\u003cli\u003eIt is best to paint on warm, dry mornings. Cold weather retards the drying and humidity can spoil the gloss.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***\u003c\/p\u003e\u003cp\u003eHow To Apply\u003c\/p\u003e\u003cp\u003eAPPLICATION METHOD: Airless Spray, Brush, Conventional Spray, Roller- Pressure Pot or Siphon Cup\u003c\/p\u003e\u003cp\u003eNUMBER OF COATS: 2-3 minimum\u003c\/p\u003e\u003cp\u003eDRY FILM THICKNESS PER COAT: 2 mils (3.6 wet mils)\u003c\/p\u003e\u003cp\u003eCOVERAGE: 550 sq. ft\/gal.\u003c\/p\u003e\u003cp\u003eAPPLICATION TEMP: 50°F Min. \/ 95°F Max.\u003c\/p\u003e\u003cp\u003eTHINNER: Brush - Brushing Liquid 333. Spray - Special Thinner 216.\u003c\/p\u003e\u003cp\u003eDRY TIMES:\u003c\/p\u003e\u003cp\u003eTemp\u003c\/p\u003e\u003cp\u003eTo Touch\u003c\/p\u003e\u003cp\u003eTo Recoat\u003c\/p\u003e\u003cp\u003e95°F\u003c\/p\u003e\u003cp\u003e1 HR\u003c\/p\u003e\u003cp\u003e8 HR\u003c\/p\u003e\u003cp\u003e73°F\u003c\/p\u003e\u003cp\u003e2 HR\u003c\/p\u003e\u003cp\u003e12 HR\u003c\/p\u003e\u003cp\u003e50°F\u003c\/p\u003e\u003cp\u003e3 HR\u003c\/p\u003e\u003cp\u003e16 HR\u003c\/p\u003e\u003cp\u003eBARE FIBERGLASS: In Good Condition Begin by scrubbing well using soap and water and a stiff brush. Rinse with fresh water and allow to dry. Wipe a small area with a clean rag that has been wetted with Fiberglass Solvent Wash 202. While the surface is still wet, wipe with a clean, dry rag. Continue this process until the entire surface has been cleaned. Sand with 180 grade (grit) paper. Remove sanding residue. In Poor Condition Clean as above. Sand with 80 grade (grit) paper. Apply White Undercoater 279.\u003c\/p\u003e\u003cp\u003eBARE WOOD: Sand surface, wipe clean. Apply White Undercoater 279. Sand surface, wipe clean.\u003c\/p\u003e\u003cp\u003eSTEEL HULLS: Sandblast or grind, remove sanding residue. Immediately apply a self-etching primer. Allow to dry for 1-24 hours. Apply one coat of Epoxy Barrier-Kote 404\/414.\u003c\/p\u003e\u003cp\u003eAPPLICATION INFORMATION: Apply 2-3 coats of Yacht Enamel* following the proper dry times. Sand between coats using 220-320 grade (grit) paper. Remove sanding residue with a rag dampened with Brushing Liquid 333. Yacht Enamel* may be applied by roller and brush using the roll and tip method. It is best to paint on warm, dry mornings. Cold weather retards the drying and humidity can spoil the gloss. Airless Spray Pressure: 170 bar\/2500 psi. Tip Size: 0.33-0.41 mm\/13-16 thou. Conventional Spray Pressure Pot: Pressure: 3.44-4.47 bar\/50-65 psi (gun pressure); 8-10 psi (pot pressure). Tip Size: 0.89-1.4 mm\/35-50 thou. Siphon Cup: Pressure: 3.44-4.47 bar\/50-65 psi - gun pressure. Tip Size: 1.5-1.8 mm\/60-70 thou.\u003c\/p\u003e\u003cp\u003eHow to Apply\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is Interlux High Gloss White Yacht Enamel used for? Interlux High Gloss White Yacht Enamel is a traditional alkyd-based marine enamel designed for above-waterline applications. It can be used on hullsides, decks, boottops, and fashion stripes, providing a bright, high-gloss finish with good color and gloss retention.\u003c\/li\u003e\n\u003cli\u003eCan Interlux Yacht Enamel be applied to fiberglass, wood, and steel? Yes. Interlux Yacht Enamel can be applied to properly prepared fiberglass, wood, and steel. Bare fiberglass and wood require White Undercoater 279, while steel requires a self-etching primer followed by one coat of Epoxy Barrier-Kote 404\/414 before applying the Yacht Enamel.\u003c\/li\u003e\n\u003cli\u003eHow many coats of Interlux Yacht Enamel should I apply? Apply a minimum of 2-3 coats of Interlux Yacht Enamel, allowing the appropriate drying time between coats. Sand between coats with 220-32…\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Interlux Paint","offers":[{"title":"Default Title","offer_id":50581704802562,"sku":"ILX-1Q","price":45.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/premium-yacht-enamel__97800.1722494879.webp?v=1791078357"},{"product_id":"interlux-interprotect-epoxy-barrier-coat-kit-gray","title":"Interlux Paint Interprotect Epoxy Barrier Coat Kit Gray","description":"\u003cp\u003eInterlux Interprotect Epoxy Barrier Coat Kit - Gray\u003c\/p\u003e\u003cp\u003eGuard against water intrusion with Interlux 2000E Interprotect, a two-part epoxy coating formulated to protect fiberglass hulls from blistering and damage. Microplate technology forms a dense barrier that prevents water absorption, making it ideal for both new builds and older boats. The gray finish goes on easily and dries into a durable layer that stands up to long-term exposure. Whether you're sealing a freshly built hull or protecting an aging one, this epoxy helps extend hull life and avoid costly repairs. Trusted by pros and DIYers, it's a proven solution for long-term hull protection.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eGreat for preventing and repairing gel coat blistering\u003c\/p\u003e\u003cp\u003eUse on underwater metals, hulls, and keels\u003c\/p\u003e\u003cp\u003eEasy application, fast-drying, no sanding needed\u003c\/p\u003e\u003cp\u003eOffers excellent anti-corrosive protection above and below the waterline\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eFinish: Matte\u003c\/p\u003e\u003cp\u003eNumber of Coats: 1-5\u003c\/p\u003e\u003cp\u003eMix Ratio: 3:1 by volume\u003c\/p\u003e\u003cp\u003eApplication Methods: Airless spray, brush, spray, roller\u003c\/p\u003e\u003cp\u003eAssociated Products:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInterlux Reducing Solvent - Spray: Thinner for spray application \u0026amp; clean-up\u003c\/li\u003e\n\u003cli\u003eInterlux Reducing Solvent - Brush: Thinner for brush application \u0026amp; clean-up\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eHow To Apply Interlux InterProtect 2000E\u003c\/p\u003e\u003cp\u003eApply InterProtect to clean, dry, and properly prepared surfaces only. Do not apply over one part paints. Prior to application, stir or shake individual components thoroughly. Add curing agent to the base at 1 part curing agent to 3 parts base (by volume). Stir and leave for 20 minutes induction time and to allow the bubbles to disperse. If thinning is needed, add thinner after the induction time.\u003c\/p\u003e\u003cp\u003eApplication Method: Airless Spray, Brush, Conventional Spray, Roller\u003c\/p\u003e\u003cp\u003eNumber of Coats: 4-5 To Reach a 10 mils dry\u003c\/p\u003e\u003cp\u003eDry Film Thickness per Coat: 2.6 mils (5.4 wet mils)\u003c\/p\u003e\u003cp\u003eCoverage: 240 sq. ft\/gal.\u003c\/p\u003e\u003cp\u003eApplication Temp: 41°F Min. \/ 95°F Max.\u003c\/p\u003e\u003cp\u003eThinner: Reducing Solvent 2316N or Brushing Liquid 2333N\u003c\/p\u003e\u003cp\u003eDry Times:\u003c\/p\u003e\u003cp\u003eTemp\u003c\/p\u003e\u003cp\u003eTo Touch\u003c\/p\u003e\u003cp\u003eImmersion\u003c\/p\u003e\u003cp\u003e95°F\u003c\/p\u003e\u003cp\u003e1\/2 hrs\u003c\/p\u003e\u003cp\u003e8 hrs\u003c\/p\u003e\u003cp\u003e73°F\u003c\/p\u003e\u003cp\u003e2 hrs\u003c\/p\u003e\u003cp\u003e12 hrs\u003c\/p\u003e\u003cp\u003e50°F\u003c\/p\u003e\u003cp\u003e3 hrs\u003c\/p\u003e\u003cp\u003e24 hrs\u003c\/p\u003e\u003cp\u003eSurface Preparation\u003c\/p\u003e\u003cp\u003eBare Fiberglass or Epoxy\u003c\/p\u003e\u003cp\u003eRemove all surface contamination using Fiberglass Surface Prep YMA601\u003c\/p\u003e\u003cp\u003eFlush with fresh water, then allow to dry.\u003c\/p\u003e\u003cp\u003eSand with 80 grit paper then remove sanding residue.\u003c\/p\u003e\u003cp\u003eWipe with Fiberglass Solvent Wash 202.\u003c\/p\u003e\u003cp\u003eSteel\u003c\/p\u003e\u003cp\u003eDegrease by wiping with a rag soaked in Fiberglass Solvent Wash 202.\u003c\/p\u003e\u003cp\u003eGrit blast to near white metal surface. A surface profile of 2-3 mils is recommended.\u003c\/p\u003e\u003cp\u003eIf grit blasting is not possible, grind the surface with a 36 grit grinding disc or sand with 40-60 grit sandpaper.\u003c\/p\u003e\u003cp\u003eBring the surface to a uniform, clean, bright metal surface with a surface profile of 2-3 mils.\u003c\/p\u003e\u003cp\u003eRemove sanding residue and immediately apply a coat of InterProtect 2000E, thinned 15-20%.\u003c\/p\u003e\u003cp\u003eApply 4-5 additional coats of InterProtect 2000E.\u003c\/p\u003e\u003cp\u003eAluminum\u003c\/p\u003e\u003cp\u003eDegrease by wiping with a rag soaked in Fiberglass Solvent Wash 202.\u003c\/p\u003e\u003cp\u003eGrit blast, grind with a 36 grit disc, or sand with 40-60 grit sandpaper. If grit blasting, use aluminum-compatible materials.\u003c\/p\u003e\u003cp\u003eBring the surface to a uniform, clean, bright metal surface. Surface profile of 2-3 mils is recommended.\u003c\/p\u003e\u003cp\u003eRemove sanding residue.\u003c\/p\u003e\u003cp\u003eWithin 1 hour of preparing surface, apply a coat of InterProtect 2000E thinned 15-20% with the correct thinner.\u003c\/p\u003e\u003cp\u003eApply 4-5 additional coats of InterProtect.\u003c\/p\u003e\u003cp\u003eBare Wood\u003c\/p\u003e\u003cp\u003eSand with 80-180 grade paper.\u003c\/p\u003e\u003cp\u003eRemove oil from oil woods (ex teak) using Special Thinner 216 or 2316N.\u003c\/p\u003e\u003cp\u003eChange rags frequently.\u003c\/p\u003e\u003cp\u003eApplication Information\u003c\/p\u003e\u003cp\u003eWhen applying via brush, use a natural bristle brush\u003c\/p\u003e\u003cp\u003eWhen applying via roller, use a 3\/8\" nap solvent-resistant roller\u003c\/p\u003e\u003cp\u003eFor airless spray application, use tip size 1880-2680, 0.44-0.53mm\/60-70 thou. and 2400psi pressure.\u003c\/p\u003e\u003cp\u003eWhen overcoating with VC 17m or VC 17m Extra, allow InterProtect to dry for 24-36 hours, then sand with 180-220 grit sand paper.\u003c\/p\u003e\u003cp\u003eIf filling is required, use appropriate fil…\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"Gallon","offer_id":50581704933634,"sku":"ILX-2000G","price":179.99,"currency_code":"USD","in_stock":true},{"title":"Quart","offer_id":50581704966402,"sku":"ILX-2000Q","price":60.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/Interlux_Interprotect_200E__88085.1780061443.webp?v=1791078358"},{"product_id":"interlux-interprotect-epoxy-barrier-coat-kit-white","title":"Interlux Paint Interprotect Epoxy Barrier Coat Kit White","description":"\u003cp\u003eInterlux Interprotect 200E Epoxy Barrier Coat Kit - White\u003c\/p\u003e\u003cp\u003eFormulated with a unique two-part epoxy coating, Interlux Interprotect 200E is the perfect product to protect and seal hulls from moisture and water absorption that can cause rotting and long-term damage to your boat hulls. When it comes to repairing or preventing osmotic blistering, Interlux 200E is the product of choice. It is specifically designed for underwater use on metals, keels, and hulls.\u003c\/p\u003e\u003cp\u003eSimilar to roof shingles, the Interlux epoxy coating contains microplates that overlap, creating a tight barrier between the hull and the water.  Interlux 200E is a universal primer with anti-corrosive properties, which makes it great for metals. It is suitable for application above and below the waterline.\u003c\/p\u003e\u003cp\u003eApplying Interlux Interprotect 200E can be done easily with a brush, roller, or airless spray. It doesn’t require sanding and dries quickly.  Interlux 200E comes in a matte finish and the kit comes in quart and gallons sizes, It can help prevent costly repairs on boat hulls. Interlux recommends 4 to 5 coats for optimal protection.\u003c\/p\u003e\u003cp\u003eKey Features:\u003c\/p\u003e\u003cp\u003eFor prevention and repair of gelcoat blistering\u003c\/p\u003e\u003cp\u003eExcellent for use on underwater metals, hulls and keels\u003c\/p\u003e\u003cp\u003eEasy to apply-dries quickly-no sanding\u003c\/p\u003e\u003cp\u003eUse as part of a no sand system\u003c\/p\u003e\u003cp\u003eExcellent anti-corrosive protection above \u0026amp; below the waterline\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eFinish: Matte\u003c\/p\u003e\u003cp\u003eNumber of Coats: 1-5\u003c\/p\u003e\u003cp\u003eMix Ratio: 3:1 by volume\u003c\/p\u003e\u003cp\u003eVOC: 464 grams per liter\u003c\/p\u003e\u003cp\u003eApplication Methods: Airless spray, brush, spray, roller\u003c\/p\u003e\u003cp\u003ePot Life: 5 Hours\u003c\/p\u003e\u003cp\u003eAssociated Products:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInterlux Reducing Solvent - Spray: Thinner for spray application \u0026amp; clean-up\u003c\/li\u003e\n\u003cli\u003eInterlux Reducing Solvent - Brush: Thinner for brush application \u0026amp; clean-up\u003c\/li\u003e\n\u003cli\u003e***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eHow To Apply Interlux Interprotect 2000E\u003c\/p\u003e\u003cp\u003eInterlux Interprotect 2000E was developed to be easy to apply without sagging or running. The quick overcoat times allow the entire system, 10 mils of epoxy and the first coat of antifouling, to be applied in two days.\u003c\/p\u003e\u003cp\u003eApplication Methods:: Airless Spray, Brush, Conventional Spray, Roller\u003c\/p\u003e\u003cp\u003eNumber of Coats: 4-5 To Reach a 10 mils dry\u003c\/p\u003e\u003cp\u003eDry Film Thickness per Coat: 2.6 mils (5.4 wet mils)\u003c\/p\u003e\u003cp\u003eCoverage: 240 sq. ft\/gal.\u003c\/p\u003e\u003cp\u003eApplication Temp: 40°F Min. \/ 95°F Max.\u003c\/p\u003e\u003cp\u003eThinner: Reducing Solvent 2316N or Brushing Liquid 2333N\u003c\/p\u003e\u003cp\u003eMix Ratio: 3:1\u003c\/p\u003e\u003cp\u003eDry\/Overcoat Times:\u003c\/p\u003e\u003cp\u003eTemp\u003c\/p\u003e\u003cp\u003eDry To Touch\u003c\/p\u003e\u003cp\u003eOvercoat Times with Self\u003c\/p\u003e\u003cp\u003eOvercoat Times for Antifouling Paint\u003c\/p\u003e\u003cp\u003e95°F\u003c\/p\u003e\u003cp\u003e1\/2 hour\u003c\/p\u003e\u003cp\u003e2 hours min \/ 6 months max\u003c\/p\u003e\u003cp\u003e1 hour min \/ 5 hours max\u003c\/p\u003e\u003cp\u003e73°F\u003c\/p\u003e\u003cp\u003e2 hours\u003c\/p\u003e\u003cp\u003e3 hours min \/ 6 months max\u003c\/p\u003e\u003cp\u003e3 hours min \/ 7 hours max\u003c\/p\u003e\u003cp\u003e50°F\u003c\/p\u003e\u003cp\u003e3 hours\u003c\/p\u003e\u003cp\u003e5 hours min \/ 6 months max\u003c\/p\u003e\u003cp\u003e5 hours min \/ 9 hours max\u003c\/p\u003e\u003cp\u003eUse this chart as a guide. For best results, use the \"Thumb Print\" method to determine when Interprotect is ready to overcoat. It usually takes 4-5 coats to apply the proper amount of Interprotect, but the amount of paint applied is more important than the number of coats. Refer to the PDF below for more information.\u003c\/p\u003e\u003cp\u003eSurface Preparation\u003c\/p\u003e\u003cp\u003eTo prevent delamination, all mold release wax and other contamination must be removed prior to the application of Interprotect. If the boat has already been painted, remove all antifouling paint with Interstrip 299E (follow directions on label).\u003c\/p\u003e\u003cp\u003eNew or Non-Blistered Hulls\u003c\/p\u003e\u003cp\u003ePreferred Method\u003c\/p\u003e\u003cp\u003eScrub well using Fiberglass Surface Prep YMA601V and a maroon nylon scrub pad.\u003c\/p\u003e\u003cp\u003eFlush well with fresh water and allow surface to dry.\u003c\/p\u003e\u003cp\u003eAlternative Method\u003c\/p\u003e\u003cp\u003eWipe a small area with a clean rag that has been wetted with Interlux Fiberglass Solvent Wash 202.\u003c\/p\u003e\u003cp\u003eBefore the Solvent Wash can dry, wipe with a clean dry rag. Change rags frequently.\u003c\/p\u003e\u003cp\u003eRepeat wiping with Fiberglass Solvent Wash 202 until surface is clean.\u003c\/p\u003e\u003cp\u003eRun water over the surface to determine if it is clean. If the water separates or beads up, you need to repeat the cleaning process. Once the surface is clea…\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"Gallon","offer_id":50581705031938,"sku":"ILX-2002G","price":179.99,"currency_code":"USD","in_stock":true},{"title":"Quart","offer_id":50581705064706,"sku":"ILX-2002Q","price":60.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/385722_source_1774549116_d696a1fb-3f9f-437d-9c30-9f3dd8bcd59e.jpg?v=1791078359"},{"product_id":"interlux-fiberglass-solvent-boat-wash","title":"Interlux Paint Solvent Wash For Al200","description":"\u003cp\u003eInterlux 202Q Fiberglass Solvent Boat Wash and Wax Remover\u003c\/p\u003e\u003cp\u003e202 Fiberglass Solvent Wash is a combination of several solvents, some of which are very slow to evaporate from the surface of gel coat being wiped. This characteristic is very important because the wax contaminants must stay in solution so that it can be wiped from the surface before it dries. 202 Solvent wash is also an excellent parts clean up and multi-purpose wipe down solvent.\u003c\/p\u003e\u003cp\u003eUse before painting bare fiberglass gel coats. This solvent removes mold release agents, wax, oil, and grease. Leaves a properly cleaned surface for optimal paint adhesion. 202 Solvent is also used for cleaning painting tools.\u003c\/p\u003e\u003cp\u003e***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***\u003c\/p\u003e\u003cp\u003eHow To Apply\u003c\/p\u003e\u003cp\u003eAPPLICATION: Wipe a small area with a clean rag that has been wetted with Fiberglass Solvent Wash 202. While the surface is still wet, wipe with a clean, dry rag. Continue this process until the entire surface has been cleaned. Rinse with fresh water. If water beads up or separates, wipe the surface again with Fiberglass Solvent Wash. When the water sheets off, all contamination has been removed. Do not paint until surface is clean and dry.\u003c\/p\u003e\u003cp\u003eNot for sale or use in California.\u003c\/p\u003e\u003cp\u003eHow to Apply\u003c\/p\u003e\u003cp\u003eMSDS\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is Interlux 202Q Fiberglass Solvent Boat Wash and Wax Remover used for? Interlux 202Q Fiberglass Solvent Boat Wash and Wax Remover is a multi-purpose solvent wash for preparing bare fiberglass gelcoat before painting. It removes mold release agents, wax, oil, and grease, leaving a properly cleaned surface for paint adhesion. It can also be used for parts cleanup and wiping down painting tools.\u003c\/li\u003e\n\u003cli\u003eHow do you use Interlux 202 Fiberglass Solvent Wash on fiberglass? Wet a clean rag with Fiberglass Solvent Wash 202 and wipe a small area. While the surface remains wet, wipe it with a clean, dry rag. Continue across the entire surface, then rinse with fresh water. If water beads or separates, repeat the solvent-washing process until the water sheets off the surface.\u003c\/li\u003e\n\u003cli\u003eWhen should Interlux 202 Fiberglass Solvent Wash be used before painting? Use Interlux 202 Fiberglass Solvent Wash before painting bare fiberglass gelcoat to remove surface contamination such as wax, oil, grease, and mold release agents. The surface should be completely clean and dry before paint is applied to help provide the appropriate surface for paint adhesion.\u003c\/li\u003e\n\u003cli\u003eCan Interlux 202 Fiberglass Solvent Wash be used for cleanup? Yes. In addition to preparing bare fiberglass gelcoat for painting, Interlux 202 Fiberglass Solvent Wash is described as an excellent parts cleanup and multi-purpose wipe-down solvent. It can also be used for cleaning painting tools.\u003c\/li\u003e\n\u003cli\u003eHow can you tell when fiberglass is properly cleaned with Interlux 202 Solvent Wash? After the surface has been rinsed with fresh water, observe how the water behaves. If it beads up or separates, the surface should be wiped again with Fiberglass Solvent Wash. When the water sheets off the surface, the contamination has been removed. Do not paint until the surface is clean and dry.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Interlux Paint","offers":[{"title":"Default Title","offer_id":50581705228546,"sku":"ILX-202Q","price":30.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/202__06802.1780061442_5b09fbe5-e91a-451b-b611-bb3586b02224.webp?v=1791078360"},{"product_id":"interlux-special-marine-paint-thinner","title":"Interlux Paint Special Thinner Qt","description":"\u003cp\u003eInterlux 216 Special Thinner (Quart) - For Brush or Spray\u003c\/p\u003e\u003cp\u003eInterlux 216 Special Thinner is a fast evaporating solvent which when added to specified paint coatings improves drying in cold climates, and facilitates spray application. 216 Thinner is also recommended for removing sanding residue from hull bottoms, wiping down bare aluminum clean, and for the general clean-up of paint equipment.\u003c\/p\u003e\u003cp\u003eUnit Size: 1 US Quart\u003c\/p\u003e\u003cp\u003eVOC (as supplied): 867 g\/lt\u003c\/p\u003e\u003cp\u003eHow To Apply Interlux 216 Special Thinner\u003c\/p\u003e\u003cp\u003eAdd small increments, in accordance with individual product directions.\u003c\/p\u003e\u003cp\u003eCompatible with most single part topside and antifouling paints.\u003c\/p\u003e\u003cp\u003eClick to Download Interlux 216 Special Thinner Application Instructions\u003c\/p\u003e\u003cp\u003e***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is Interlux 216 Special Thinner used for? Interlux 216 Special Thinner is a fast-evaporating solvent used with specified paint coatings to improve drying in cold climates and facilitate spray application. It can also be used to remove sanding residue from hull bottoms, clean bare aluminum, and clean paint application equipment.\u003c\/li\u003e\n\u003cli\u003eCan Interlux 216 Special Thinner be used for spray application? Yes. Interlux 216 Special Thinner can facilitate spray application when used with compatible paint coatings. Add it in small increments according to the directions for the specific paint product rather than using a fixed general-purpose mixing ratio.\u003c\/li\u003e\n\u003cli\u003eCan Interlux 216 Special Thinner be used with antifouling and topside paints? Yes. Interlux 216 Special Thinner is compatible with most single-part topside and antifouling paints. However, it should be added only in accordance with the individual paint product's directions to ensure the correct application and drying characteristics.\u003c\/li\u003e\n\u003cli\u003eCan Interlux 216 Special Thinner be used for surface preparation? Yes. Interlux 216 Special Thinner is recommended for removing sanding residue from hull bottoms and wiping down bare aluminum before painting. It can also be used for general cleanup of paint equipment.\u003c\/li\u003e\n\u003cli\u003eHow much Interlux 216 Special Thinner should I add to paint? Add Interlux 216 Special Thinner in small increments according to the directions for the specific paint coating being used. The product description does not specify a universal mixing ratio, so follow the individual paint manufacturer's application instructions.\u003c\/li\u003e\n\u003cli\u003eWhat size container does Interlux 216 Special Thinner come in? Interlux 216 Special Thinner is supplied in a 1 US quart container. Its VOC content as supplied is 867 g\/lt.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Interlux Paint","offers":[{"title":"Default Title","offer_id":50581705392386,"sku":"ILX-216Q","price":25.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/216P__07430.1780061443.webp?v=1791078361"},{"product_id":"interlux-reducing-solvent-spray-applications","title":"Interlux Paint Reducing Solvent-Spray Qt","description":"\u003cp\u003eInterlux 2316 Reducing Solvent - Spray Applications\u003c\/p\u003e\u003cp\u003eReducing Solvent 2316N is a fast evaporating solvent to be used in specific two-part polyurethane and epoxy products. Refer to the specific product directions for the amount of Interlux Reducing Solvent 2316N to be used.\u003c\/p\u003e\u003cp\u003eSold in quarts\u003c\/p\u003e\u003cp\u003e***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***\u003c\/p\u003e\u003cp\u003eHow to Apply\u003c\/p\u003e\u003cp\u003eMSDS\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is Interlux 2316 Reducing Solvent used for? Interlux 2316 Reducing Solvent, also identified as Reducing Solvent 2316N, is a fast-evaporating solvent intended for use with specific two-part polyurethane and epoxy products. It is designed for spray applications where the specific product directions call for its use.\u003c\/li\u003e\n\u003cli\u003eCan Interlux Reducing Solvent 2316N be used with any paint or coating? No. Interlux Reducing Solvent 2316N is intended only for specific two-part polyurethane and epoxy products. Refer to the directions for the particular product to confirm whether this reducing solvent is specified.\u003c\/li\u003e\n\u003cli\u003eHow much Interlux 2316 Reducing Solvent should be added? The required amount of Interlux Reducing Solvent 2316N depends on the specific two-part polyurethane or epoxy product being used. Follow the directions for that product to determine the appropriate amount rather than assuming a general mixing ratio.\u003c\/li\u003e\n\u003cli\u003eWhat type of applications is Interlux 2316 Reducing Solvent designed for? Interlux 2316 Reducing Solvent is intended for spray applications with specific two-part polyurethane and epoxy products. Its fast-evaporating formulation is used where the applicable product directions specify Reducing Solvent 2316N.\u003c\/li\u003e\n\u003cli\u003eWhat size is Interlux 2316 Reducing Solvent sold in? Interlux 2316 Reducing Solvent is sold in quart containers.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Interlux Paint","offers":[{"title":"Default Title","offer_id":50581705523458,"sku":"ILX-2316NQ","price":27.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/RedSol2316N_1QTUS_10A_3D__48983.1780061442_16140815-f1e6-4500-ba18-94aea577b9a8.webp?v=1791078362"},{"product_id":"interlux-marine-paint-reducing-solvent","title":"Interlux Paint Reducing Solvent-Brush Qt","description":"\u003cp\u003eInterlux 2333N Marine Paint Reducing Solvent\u003c\/p\u003e\u003cp\u003eInterlux 2333N Reducing Solvent is a slow evaporating solvent to be used in specific two-part polyurethane and epoxy products.\u003c\/p\u003e\u003cp\u003eRefer to the specific product directions for the amount to be used.\u003c\/p\u003e\u003cp\u003eSold in quarts\u003c\/p\u003e\u003cp\u003eVOC (as supplied): 884 g\/lt\u003c\/p\u003e\u003cp\u003e***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***\u003c\/p\u003e\u003cp\u003eClick to Download Interlux Marine Paint Reducing Solvent Application Instructions\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is Interlux 2333N Marine Paint Reducing Solvent used for? Interlux 2333N Marine Paint Reducing Solvent is a slow-evaporating solvent designed for use with specific two-part polyurethane and epoxy products. It is intended to be used only where the directions for the particular coating specify Interlux 2333N as the appropriate reducing solvent.\u003c\/li\u003e\n\u003cli\u003eHow much Interlux 2333N Reducing Solvent should I use? The amount of Interlux 2333N Reducing Solvent to use depends on the specific two-part polyurethane or epoxy product. Always refer to the directions for the coating being applied to determine the appropriate amount rather than using a general mixing ratio.\u003c\/li\u003e\n\u003cli\u003eIs Interlux 2333N compatible with all marine paints and coatings? No specific compatibility with all marine paints or coatings is stated. Interlux 2333N is described for use with specific two-part polyurethane and epoxy products, so the directions for the particular coating should be checked before using this solvent.\u003c\/li\u003e\n\u003cli\u003eHow is Interlux 2333N Marine Paint Reducing Solvent supplied? Interlux 2333N Marine Paint Reducing Solvent is sold in quart containers.\u003c\/li\u003e\n\u003cli\u003eWhat is the VOC content of Interlux 2333N Reducing Solvent? The listed VOC content of Interlux 2333N Marine Paint Reducing Solvent, as supplied, is 884 g\/L.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Interlux Paint","offers":[{"title":"Default Title","offer_id":50581705720066,"sku":"ILX-2333N","price":41.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/2333N__20098.1780061442_4ed09ff5-4e2c-42a5-abd4-41b5e12f3c0d.jpg?v=1791078363"},{"product_id":"interlux-marine-brushing-thinner-quart","title":"Interlux Paint Brushing Liquid Qt","description":"\u003cp\u003eInterlux 333Q Marine Brushing Thinner\u003c\/p\u003e\u003cp\u003eInterlux Brushing Thinner is a slow drying solvent to ease brushing and facilitate the flow of specified paint coatings.\u003c\/p\u003e\u003cp\u003eSlow Drying Solvent\u003c\/p\u003e\u003cp\u003eUsed to Ease Brushing and Facilitate the flow of Coatings\u003c\/p\u003e\u003cp\u003eExtends Paint Drying Time in Hot Weather\u003c\/p\u003e\u003cp\u003eRecommended In Various Topside Systems for Removing Sanding Residue from Fiberglass and Wood Surfaces\u003c\/p\u003e\u003cp\u003eSold in Quarts\u003c\/p\u003e\u003cp\u003eApplication and Use:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAdd small increments, in accordance with individual product directions.\u003c\/li\u003e\n\u003cli\u003eCompatible with specified topside paints including Brightside and Toplac.\u003c\/li\u003e\n\u003cli\u003e***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***\u003c\/li\u003e\n\u003cli\u003eMSDS\u003c\/li\u003e\n\u003cli\u003eFrequently Asked Questions\u003c\/li\u003e\n\u003cli\u003eWhat is Interlux 333Q Marine Brushing Thinner used for? Interlux 333Q Marine Brushing Thinner is a slow-drying solvent designed to ease brushing and improve the flow of specified paint coatings. It can also be used in certain topside coating systems to remove sanding residue from fiberglass and wood surfaces.\u003c\/li\u003e\n\u003cli\u003eWhich paints can be used with Interlux 333Q Marine Brushing Thinner? Interlux 333Q is compatible with specified topside paints, including Interlux Brightside and Toplac. Always follow the individual paint product's directions for compatibility and the appropriate amount of thinner to use.\u003c\/li\u003e\n\u003cli\u003eHow should Interlux 333Q Marine Brushing Thinner be added to paint? Add Interlux 333Q Marine Brushing Thinner in small increments according to the directions for the specific paint being used. The thinner is intended to assist brushing and coating flow, rather than provide a universal mixing ratio for every compatible coating.\u003c\/li\u003e\n\u003cli\u003eCan Interlux 333Q Marine Brushing Thinner be used in hot weather? Yes. Interlux 333Q is a slow-drying solvent that can extend paint drying time in hot weather. Use it according to the individual coating's application instructions to help facilitate brushing and maintain proper flow.\u003c\/li\u003e\n\u003cli\u003eCan Interlux 333Q be used to remove sanding residue? Interlux 333Q Marine Brushing Thinner is recommended in various topside coating systems for removing sanding residue from fiberglass and wood surfaces. Follow the preparation instructions for the specific coating system to determine how it should be used.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Interlux Paint","offers":[{"title":"Default Title","offer_id":50581705916674,"sku":"ILX-333Q","price":30.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/ILX-333Q__44653.1780061442.jpg?v=1791078365"},{"product_id":"interlux-brush-ease-433-marine-paint-thinner","title":"Interlux Paint Brush-Ease","description":"\u003cp\u003eInterlux Brush Ease 433 Marine Paint Thinner\u003c\/p\u003e\u003cp\u003eInterlux Brush-Ease 433 is a slow drying solvent to ease brushing and rolling and to improve flow. Interlux Brush-Ease 433 should only be used in products where it is specified in the directions, mostly antifouling paints, it is not an all purpose solvent.\u003c\/p\u003e\u003cp\u003eSold in quarts.\u003c\/p\u003e\u003cp\u003eCompatible with specified antifouling paints including Micron CSC, Micron Extra and Trilux.\u003c\/p\u003e\u003cp\u003e***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***\u003c\/p\u003e\u003cp\u003eHow to Apply:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAdd small increments, in accordance with individual product directions.\u003c\/li\u003e\n\u003cli\u003eHow to Apply\u003c\/li\u003e\n\u003cli\u003eMSDS\u003c\/li\u003e\n\u003cli\u003eFrequently Asked Questions\u003c\/li\u003e\n\u003cli\u003eWhat is Interlux Brush Ease 433 Marine Paint Thinner used for? Interlux Brush Ease 433 is a slow-drying solvent designed to ease brushing and rolling while improving paint flow. It is intended for use with products whose directions specifically call for Brush-Ease 433, primarily antifouling paints.\u003c\/li\u003e\n\u003cli\u003eCan Interlux Brush Ease 433 be used as an all-purpose solvent? No. Interlux Brush Ease 433 is not an all-purpose solvent. It should only be used with products where the application directions specifically specify Brush-Ease 433 as the appropriate solvent.\u003c\/li\u003e\n\u003cli\u003eWhich antifouling paints are compatible with Interlux Brush Ease 433? Interlux Brush Ease 433 is compatible with specified antifouling paints including Micron CSC, Micron Extra, and Trilux. Always follow the directions for the specific paint to confirm that Brush-Ease 433 is called for.\u003c\/li\u003e\n\u003cli\u003eHow does Interlux Brush Ease 433 affect paint application? Interlux Brush Ease 433 is formulated as a slow-drying solvent to make brushing and rolling easier and improve the flow of compatible paint products. Its use should be limited to products whose directions specifically recommend it.\u003c\/li\u003e\n\u003cli\u003eWhat size is Interlux Brush Ease 433 Marine Paint Thinner sold in? Interlux Brush Ease 433 Marine Paint Thinner is sold in quart containers.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Interlux Paint","offers":[{"title":"Default Title","offer_id":50581706211586,"sku":"ILX-433Q","price":27.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/ILX-433Q__80418.1780061442.jpg?v=1791078366"},{"product_id":"interlux-micron-csc-antifouling-bottom-paint","title":"Interlux Paint Micron CSC Antifouling Bottom Paint","description":"\u003cp\u003eInterlux Micron CSC Antifouling Bottom Paint\u003c\/p\u003e\u003cp\u003eInterlux Micron CSC is a premium self-polishing ablative bottom paint that delivers long-lasting, multi-season protection against marine fouling. Using Micron Technology, this copper-copolymer formula slowly wears away in a controlled way as the boat moves, continually exposing fresh biocide at the surface. That means reliable antifouling performance in fresh, salt, and brackish water without the heavy paint build-up and aggressive sanding associated with many hard bottom paints.\u003c\/p\u003e\u003cp\u003eMicron CSC is suitable for both powerboats and sailboats and can be used on fiberglass, wood, and properly primed steel or lead below the waterline. It is not recommended for aluminum hulls or underwater aluminum components. Available in a range of popular colors, it’s one of the most trusted choices for boaters who want proven, easy-to-maintain multi-season protection.\u003c\/p\u003e\u003cp\u003eBest Uses\u003c\/p\u003e\u003cp\u003eMulti-season antifouling protection for powerboats and sailboats\u003c\/p\u003e\u003cp\u003eBoats that stay in fresh, salt, or brackish water for extended periods\u003c\/p\u003e\u003cp\u003eOwners who want an ablative coating that minimizes bottom paint build-up and sanding at recoat time\u003c\/p\u003e\u003cp\u003eBoats that are hauled for winter storage and relaunched the following season\u003c\/p\u003e\u003cp\u003eFiberglass, wood, and properly primed steel or lead hulls below the waterline (not suitable for aluminum)\u003c\/p\u003e\u003cp\u003eKey Features \u0026amp; Benefits\u003c\/p\u003e\u003cp\u003eMulti-season ablative protection: Micron Technology provides long-lasting defense against a wide range of fouling in all water types when applied at the recommended film thickness.\u003c\/p\u003e\u003cp\u003eCopper-copolymer formula: Uses a controlled-solubility copolymer with cuprous oxide to maintain an active biocide layer at the paint surface throughout the season.\u003c\/p\u003e\u003cp\u003eSelf-polishing, low build-up: The coating gradually erodes in a controlled way, like a bar of soap, helping prevent excessive paint build-up and reducing the amount of sanding needed at recoat.\u003c\/p\u003e\u003cp\u003eHaul and relaunch flexibility: Micron CSC can be hauled for storage and relaunched later without losing effectiveness, provided the film is in good condition and properly cleaned before going back in the water.\u003c\/p\u003e\u003cp\u003eSmoother, more efficient hull: The polishing action helps the bottom remain smooth, which can improve speed and fuel efficiency compared to rough or heavily built-up coatings.\u003c\/p\u003e\u003cp\u003eVersatile application: Can be applied by brush, roller, or spray over most existing antifouling paints that are in sound condition, following the Interlux compatibility guidelines.\u003c\/p\u003e\u003cp\u003eApplication \u0026amp; System Overview\u003c\/p\u003e\u003cp\u003eMicron CSC can be applied over most well-adhered antifouling coatings or directly to properly prepared bare substrates as part of an Interlux paint system. Always read the product label and technical datasheet before starting a job.\u003c\/p\u003e\u003cp\u003eSubstrates: Fiberglass, wood, and properly primed steel or lead below the waterline (not for aluminum hulls or drives).\u003c\/p\u003e\u003cp\u003eExisting antifouling: Confirm compatibility with the Interlux antifouling compatibility chart. The existing paint must be aged, tightly adhered, and in good condition.\u003c\/p\u003e\u003cp\u003eCoats: Typically 2–3 full coats are recommended, with an extra stripe coat on high-wear areas such as the waterline, chines, rudders, and leading edges.\u003c\/p\u003e\u003cp\u003eMethods: Apply by brush, roller, or spray using equipment suitable for solvent-based bottom paints, following all safety and ventilation guidelines.\u003c\/p\u003e\u003cp\u003eAlways stir or shake Micron CSC thoroughly before and during application to keep the copper and resins evenly distributed in the can.\u003c\/p\u003e\u003cp\u003eSurface Preparation Overview\u003c\/p\u003e\u003cp\u003eGood surface preparation is essential for maximum performance and adhesion. The steps below are a general overview; always follow the detailed instructions on the Micron CSC label and technical datasheet.\u003c\/p\u003e\u003cp\u003ePreviously painted surfaces – in good condition\u003c\/p\u003e\u003cp\u003eScrub the bottom to remove slime, salts, and loose growth, then rinse and allow to dry.\u003c\/p\u003e\u003cp\u003eLightly sand with the recommended grit if required to create a smooth, dull surface.\u003c\/p\u003e\u003cp\u003eRemove sanding residue and …\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"5608561","offer_id":50581706375426,"sku":"ILX-5580Q","price":124.49,"currency_code":"USD","in_stock":true},{"title":"5608563","offer_id":50581706408194,"sku":"ILX-5581G","price":439.79,"currency_code":"USD","in_stock":false},{"title":"5608566","offer_id":50581706440962,"sku":"ILX-5582G","price":439.79,"currency_code":"USD","in_stock":true},{"title":"5608568","offer_id":50581706473730,"sku":"ILX-5582Q","price":124.49,"currency_code":"USD","in_stock":true},{"title":"5608570","offer_id":50581706506498,"sku":"ILX-5583G","price":439.79,"currency_code":"USD","in_stock":true},{"title":"5608573","offer_id":50581706539266,"sku":"ILX-5583Q","price":124.49,"currency_code":"USD","in_stock":true},{"title":"5608575","offer_id":50581706572034,"sku":"ILX-5584G","price":439.79,"currency_code":"USD","in_stock":true},{"title":"5608577","offer_id":50581706604802,"sku":"ILX-5584Q","price":124.49,"currency_code":"USD","in_stock":true},{"title":"Gallon","offer_id":50581706637570,"sku":"ILX-5580G","price":439.79,"currency_code":"USD","in_stock":true},{"title":"Quart","offer_id":50581706670338,"sku":"ILX-5581Q","price":124.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/MicronCSC__89761.1722360070_4448a122-bd62-4c9d-a400-767bd5e9cdca.jpg?v=1791078367"},{"product_id":"interlux-goldspar-satin-marine-varnish-quart","title":"Interlux Paint Gold Spar Satin Qt","description":"\u003cp\u003eInterlux Goldspar Satin Marine Varnish- Quart\u003c\/p\u003e\u003cp\u003eGoldspar Satin is a low luster modified urethane varnish designed for application to interior wood surfaces. Easy to apply and yields professional results by either brush or spray. Ideal for anywhere a low luster finish is desired.\u003c\/p\u003e\u003cp\u003eIdeal for cabin interiors such as counters, cabinets and tables\u003c\/p\u003e\u003cp\u003eProduces a warm, rich sheen finish which resists scratches and alcohol stains.\u003c\/p\u003e\u003cp\u003eAlso suggested for home interior finishes such as bar tops, furniture and paneling.\u003c\/p\u003e\u003cp\u003eExcellent handling qualities enable truly professional results.\u003c\/p\u003e\u003cp\u003eSold in quarts.\u003c\/p\u003e\u003cp\u003eAssociated Products:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInterlux Brushing Thinner: Thinner for brush application\u003c\/li\u003e\n\u003cli\u003eInterlux Special Thinner: Thinner for spray application \u0026amp; clean-up\u003c\/li\u003e\n\u003cli\u003eSpecifications:\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFinish: Satin\u003c\/p\u003e\u003cp\u003eNumber of Coats: At least 5-6 coats*\u003c\/p\u003e\u003cp\u003eCoverage (Approx): 419.3 ft²\/gal by brush     |     351.2 ft²\/gal by spray\u003c\/p\u003e\u003cp\u003e*If applying on bare wood, thin the first coat 10%\u003c\/p\u003e\u003cp\u003eHow To Apply\u003c\/p\u003e\u003cp\u003eAPPLICATION DATA METHOD: Airless Spray, Brush, Conventional Spray, Roller- Pressure Pot or Siphon Cup\u003c\/p\u003e\u003cp\u003eNUMBER OF COATS: At least 5-6 coats Bare Wood: Thin first coat 10%\u003c\/p\u003e\u003cp\u003eCOVERAGE: 419 sq. ft\/gal.\u003c\/p\u003e\u003cp\u003eAPPLICATION TEMP: 50°F Min. \/ 95°F Max.\u003c\/p\u003e\u003cp\u003eTHINNER: Brushing Liquid 333\u003c\/p\u003e\u003cp\u003eDRY TIMES:\u003c\/p\u003e\u003cp\u003eTemp\u003c\/p\u003e\u003cp\u003eTo Recoat\u003c\/p\u003e\u003cp\u003eTo Touch\u003c\/p\u003e\u003cp\u003e95°F\u003c\/p\u003e\u003cp\u003e8 HR\u003c\/p\u003e\u003cp\u003e1 HR\u003c\/p\u003e\u003cp\u003e73°F\u003c\/p\u003e\u003cp\u003e12 HR\u003c\/p\u003e\u003cp\u003e2 HR\u003c\/p\u003e\u003cp\u003e50°F\u003c\/p\u003e\u003cp\u003e16 HR\u003c\/p\u003e\u003cp\u003e3 HR\u003c\/p\u003e\u003cp\u003eNote: Goldspar Satin* must be sanded between coats.\u003c\/p\u003e\u003cp\u003ePREVIOUSLY VARNISHED WOOD: In Good Condition Sand surface with 120-150 grade (grit) paper and remove all dust. In Poor Condition If varnish is badly checked or peeling, remove finish to bare wood with Interstrip Semi-Paste 299E. Follow directions for varnishing bare wood. Method Apply at least 5-6 coats on bare wood and a minimum of 3 coats on previously varnished surfaces until a satisfactory finish is obtained. Sand between each coat with 220 grade (grit) paper. Remove sanding residue with a rag dampened with Brushing Liquid 333.\u003c\/p\u003e\u003cp\u003eBARE WOOD: Sand with 80 grade (grit) paper. Wipe with Brushing Liquid 333. Apply sealer coat of varnish reduced 10% with Brushing Liquid 333.\u003c\/p\u003e\u003cp\u003eAPPLICATION INFORMATION: Apply at least 5-6 coats on bare wood and a minimum of 3 coats on previously varnished surfaces until a satisfactory finish is obtained. Sand between each coat with 220 grade (grit) paper. Remove sanding residue with a rag dampened with Brushing Liquid 333. It is best to paint on warm, dry mornings. Cold weather retards the drying and humidity can spoil the gloss. Be sure to have good ventilation when applying Rubbed Effect and through its drying time. Airless Spray Pressure: 170 bar\/2500 psi. Tip Size: 0.33-0.41 mm\/13-16 thou. Conventional Spray Pressure Pot: Pressure: 3.44-4.47 bar\/50-65 psi (gun pressure); 8-10 psi (pot pressure). Tip Size: 1.0-1.4 mm\/40-50 thou. Siphon Cup: Pressure: 3.44-4.47 bar\/50-65 psi - gun pressure. Tip Size: 1.5-1.8 mm\/60-70 thou. Brush Always use a clean brush that is kept specifically for varnishing. Clean brushes before use. Roller If rolling, use a thin nap roller and \"tip-off\" with a clean natural bristle brush. Other Spray pressures listed are recommendations only. The applicator may use any settings which yield the best results for the individual spraying technique and current weather conditions. To enhance appearance of the bare wood and fill porous open grain, apply Interstain according to label directions and allow to dry overnight. Excessive wet film thickness (more than 5 mils WFT) may result in poor and uneven gloss. Never leave bare wood exposed for long periods of time as it will absorb moisture. Avoid using Goldspar Satin* straight from the can as this will cause it to age prematurely and may introduce contamination to the can. Failure to follow proper dry times carefully will cause improper drying, wrinkling and loss of adhesion. Avoid painting in direct sunlight. Product temperature should be minimum 10°…\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"Default Title","offer_id":50581706801410,"sku":"ILX-60","price":51.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/GoldsparSatin_1Q__51109.1739458526.jpg?v=1791078368"},{"product_id":"interlux-fiberglass-surface-prep","title":"Interlux Paint Fiberglass Surface Prep Gal.","description":"\u003cp\u003eInterlux 601 Fiberglass Surface Prep\u003c\/p\u003e\u003cp\u003eInterlux Fiberglass Surface Prep is a mold release agent and wax remover, which precludes the need for sanding bare fiberglass when used with Fiberglass No Sand Primer. It is also used to thoroughly clean the gelcoat and provide a key for the Fiberglass No Sand Primer to be applied. The use of Fiberglass Surface Prep to remove these contaminants is extremely important if full adhesive qualities of Fiberglass No Sand Primer are to be realized. Fiberglass Surface Prep can also be used to remove Amine Blush from clear epoxy and clean previously painted surfaces when prepping to repaint.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eLow V.O.C. fiberglass surface preparation\u003c\/p\u003e\u003cp\u003eRemoves contamination, mold release agents, wax and amine blush\u003c\/p\u003e\u003cp\u003eClean previously painted surfaces before repainting topside finishes\u003c\/p\u003e\u003cp\u003eIdeal for preparing inflatable boats for antifouling\u003c\/p\u003e\u003cp\u003e***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***\u003c\/p\u003e\u003cp\u003eHow To Apply\u003c\/p\u003e\u003cp\u003eAPPLICATION INFORMATION:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eFor use on Fiberglass, clear epoxy and previously painted surfaces.  Apply Fiberglass Surface Prep YMA601 to a damp sponge or 3M® maroon Scotch-Brite® pad. Then scrub the surface to be cleaned using moderate pressure. Wipe off with a clean, wet cloth ensuring that no traces of Fiberglass Surface Prep YMA601 remain. Repeat until all residue is removed, changing cloths frequently. As soon as the surface is dry, it is ready to paint. Before application of the primer it is very important that all contamination has been removed. To be certain the contamination has been removed, run water over the surface, if the water beads up or separates, wipe again with Fiberglass Surface Prep YMA601. If more than 4 hours pass without overcoating wipe with a clean wet cloth and allow to dry.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eHow to Apply\u003c\/p\u003e\u003cp\u003eMSDS\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"Default Title","offer_id":50581706965250,"sku":"ILX-601G","price":130.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/385898_source_1528743589.jpg?v=1791078369"},{"product_id":"interlux-primocon-underwater-primer","title":"Interlux Paint Primocon Underwater Primer","description":"\u003cp\u003eInterlux Primocon Underwater Marine Primer\u003c\/p\u003e\u003cp\u003ePrimacon is an anti-corrosive primer for all underwater metal surfaces.  It will provide an excellent barrier to reduce pitting caused by galvanic corrosion.  For non-aluminum underwater metal use any (non-vinyl_ Interlux antifouling paint.  An excellent primer for antifouling paint over sanded fiberglass.  Primocon can be used as a conversion coating over unknown well-adhered antifouling paint to prevent cracking of new antifouling paint.  Primocon will not affect the color of antifouling paint.\u003c\/p\u003e\u003cp\u003eAn excellent primer for antifouling paint over sanded fiberglass\u003c\/p\u003e\u003cp\u003eAn anticorrosive primer for underwater metal surfaces (including hulls, running gear, and the lower units of outboards and I\/O's)\u003c\/p\u003e\u003cp\u003eReduce pitting of the metal from galvanic corrosion\u003c\/p\u003e\u003cp\u003eAvailable in gallons (ILX-984G) and quarts (ILX-984Q)\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eFinish: Matte\u003c\/p\u003e\u003cp\u003eNumber of Coats: 3-4\u003c\/p\u003e\u003cp\u003eApplication Method: Brush, roller, airless spray, conventional spray\u003c\/p\u003e\u003cp\u003eCoverage (approximate): 301.2 ft²\/gal by brush, 142.5 ft²\/gal by spray\u003c\/p\u003e\u003cp\u003e***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***\u003c\/p\u003e\u003cp\u003eHow To Apply\u003c\/p\u003e\u003cp\u003eAPPLICATION DATA METHOD: Airless Spray, Brush, Conventional Spray, Roller- Pressure Pot or Siphon Cup\u003c\/p\u003e\u003cp\u003eNUMBER OF COATS: 3-4 as needed\u003c\/p\u003e\u003cp\u003eDRY FILM THICKNESS PER COAT: 1.6 mils (4.8 wet mils)\u003c\/p\u003e\u003cp\u003eCOVERAGE: 300 sq. ft\/gal.\u003c\/p\u003e\u003cp\u003eAPPLICATION TEMP: 50°F Min. \/ 95°F Max.\u003c\/p\u003e\u003cp\u003eDRY TIMES:\u003c\/p\u003e\u003cp\u003eTemp\u003c\/p\u003e\u003cp\u003eTo Recoat\u003c\/p\u003e\u003cp\u003eTo Touch\u003c\/p\u003e\u003cp\u003e95°F\u003c\/p\u003e\u003cp\u003e3 HR\u003c\/p\u003e\u003cp\u003e1 HR\u003c\/p\u003e\u003cp\u003e73°F\u003c\/p\u003e\u003cp\u003e5 HR\u003c\/p\u003e\u003cp\u003e2 HR\u003c\/p\u003e\u003cp\u003e50°F\u003c\/p\u003e\u003cp\u003e8 HR\u003c\/p\u003e\u003cp\u003e3 HR\u003c\/p\u003e\u003cp\u003eNote: Do not overcoat Primocon* with VC Offshore, Baltoplate, VC 17m, VC 17m Extra or 2-part epoxies.\u003c\/p\u003e\u003cp\u003ePREVIOUSLY PAINTED SURFACES: Sand with 80 grade (grit) paper. Wipe down with Brush-Ease 433 or Special Thinner 216 to remove sanding residue.\u003c\/p\u003e\u003cp\u003eBARE METAL: Surface should be blasted to bright metal. For steel surfaces, grit blasting is preferred. For aluminum or other light alloys, sandblast if possible or grind with medium coarse grade (grit) emery cloth. Remove all blasting\/grinding\/sanding residues with a clean air line and sweep with a clean brush or broom. (Vacuum clean for best results.) Do not wipe with cloth rages after blasting or sanding as fibers may be pulled out and protrude through the primer coats.\u003c\/p\u003e\u003cp\u003eAPPLICATION INFORMATION: Apply a minimum of 3 coats of Primocon*. Primocon* may be applied directly to blasted metals if applied within 1 hour after blasting. If sanded or if more than 1 hour has passed since blasting, prime bare metal with self-etching primer. Airless Spray Pressure: 170-204 bar\/2500-3000 psi. Tip Size: 0.53 mm\/21 thou. Conventional Spray Pressure Pot: Pressure: 3.44-4.47 bar\/50-65 psi (gun pressure); 8-10 psi (pot pressure). Tip Size: 1.5-1.8 mm\/60-70 thou. Siphon Cup: Pressure: 3.44-4.47 bar\/50-65 psi - gun pressure. Tip Size: 1.8-2.2 mm\/70-85 thou. When spraying with Siphon Cup equipment, reduce first with Special Thinner 216. Other Apply extra coats of Primocon* over riveted or welded areas. Do not sand between coats of Primocon* or between last coat of primer and first coat of antifouling. There is no maximum overcoating time between coats of Primocon* or between the last coat of primer and the first coat of antifouling paint. It is, however, suggested that after thirty days the surface is sanded and wiped clean before proceeding. Product temperature should be minimum 10°C\/50°F and maximum 29°C\/85°F. Ambient temperature should be minimum 10° C\/50°F and maximum 35°C\/95°F. Substrate temperature should be minimum 10°C\/50°F and maximum 29°C\/85°F. Primocon* prevents leaching of TBT from an underlying antifouling coating provided it is applied at a minimumdry film thickness of 3.5 mils (minimum of 2 coats by roller) \u0026amp; that the film remains intact. We have studied the leaching rate of TBT from a TBT SPC antifouling (such as Micron 44) overcoated with Primo…\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"Gallon","offer_id":50581707129090,"sku":"ILX-984G","price":148.99,"currency_code":"USD","in_stock":true},{"title":"Quart","offer_id":50581707161858,"sku":"ILX-984Q","price":46.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/385971_source_1528743364_8c195a76-dfa0-4983-b5bd-67cf5574c2a0.jpg?v=1791078370"},{"product_id":"interlux-sikkens-cetol-marine-light-wood-finish","title":"Interlux Paint Cetol Marine Light Qt","description":"\u003cp\u003eInterlux Sikkens Cetol Marine Light Wood Finish\u003c\/p\u003e\u003cp\u003eInterlux Sikkens Cetol Marine Light with Next Wave UV-absorbing technology is a durable translucent protective wood finish for use above the waterline on interior and exterior woods. Next Wave technology is the next generation of Cetol Marine from Sikkens with a unique UV-absorbing package, which is specialty resins and advanced UV absorbers that provide greater protection, durability and longevity. Cetol Marine Light provides a flexible breathable finish along with weather protection for teak and other hard woods all with ease of application and maintenance. It is formulated with Next Wave technology, special alkyd resin and high quality synthetic UV-absorbing pigments which shields wood against damaging UV rays. Cetol Marine Light is identical to the Cetol Marine but formulated with different pigments to produce a lighter amber appearance on wood.\u003c\/p\u003e\u003cp\u003eInterlux Sikkens Cetol Marine Wood Finish can be used on exterior and interior hardwood varieties such as teak, mahogany and oak. Cetol products should only be applied above the waterline.\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eSize: Quarts\u003c\/p\u003e\u003cp\u003eFinish: Satin\u003c\/p\u003e\u003cp\u003eApplication Method: Wood\u003c\/p\u003e\u003cp\u003eNumber of Coats: 2-3\u003c\/p\u003e\u003cp\u003eCoverage (Approx): 360 ft²\/gal.\u003c\/p\u003e\u003cp\u003eDo not thin.\u003c\/p\u003e\u003cp\u003eInterlux Special Thinner can be used for clean up.\u003c\/p\u003e\u003cp\u003eHow To Apply\u003c\/p\u003e\u003cp\u003eHOW TO APPLY INTERLUX SIKKENS CETOL MARINE LIGHT WOOD FINISH\u003c\/p\u003e\u003cp\u003eFINISH: Satin\u003c\/p\u003e\u003cp\u003eAPPLICATION DATA METHOD: Brush\u003c\/p\u003e\u003cp\u003eNUMBER OF COATS: 2-3\u003c\/p\u003e\u003cp\u003eCOVERAGE: 440 sq. ft\/gal.\u003c\/p\u003e\u003cp\u003eAPPLICATION TEMP: 50°F Min. \/ 95°F Max.\u003c\/p\u003e\u003cp\u003eTHINNER: Do Not Thin\u003c\/p\u003e\u003cp\u003eDRY TIMES:\u003c\/p\u003e\u003cp\u003eTemp\u003c\/p\u003e\u003cp\u003eTo Touch\u003c\/p\u003e\u003cp\u003eTo Hard Dry\u003c\/p\u003e\u003cp\u003eTo Recoat\u003c\/p\u003e\u003cp\u003e73°F\u003c\/p\u003e\u003cp\u003e4 HR\u003c\/p\u003e\u003cp\u003e24 HR\u003c\/p\u003e\u003cp\u003e24 HR\u003c\/p\u003e\u003cp\u003eNEW WOOD: Wipe the wood with Interlux® Special Thinner 216 to remove any natural surface oils and contaminants. Allow to dry, sand surfaces with 180-220 (grade) grit paper (always sand along the length of the grain). Remove all sanding residue by vacuuming the surface. Wipe the surface with Interlux Special Thinner 216 and allow to dry completely prior to application of Cetol® Marine Light.\u003c\/p\u003e\u003cp\u003ePREVIOUSLY COATED WOOD: Remove all coatings prior to application of Cetol® Marine Light. To remove old coating, either sand with 120-180 (grade) grit paper or use Interlux Interstrip 299E chemical stripper which has been designed for marine use. Once previous coating has been removed, follow instructions for New Exterior\/Interior wood.\u003c\/p\u003e\u003cp\u003eWEATHERED\/OILED WOOD: To ensure good adhesion of Cetol® Marine Light on weathered or previously oiled wood, use Interlux Premium Teak Restorer with a nylon scruffing pad as per instructions on label. Rinse with fresh water and allow to dry. Once complete follow instructions for New Exterior\/Interior wood.\u003c\/p\u003e\u003cp\u003eAPPLICATION INFORMATION: The wood moisture content should be below 18%. Apply liberally using a long-haired bristle brush, smoothly, in the direction of the grain. Keep a wet edge to prevent lap marks and thoroughly saturate end grains where possible. Apply 3 coats of Cetol® Marine Light. Always allow 24 hours drying time in between coats. Sanding between coats is not recommended as this will result in a reduction of dry film thickness. Recommended film thickness must be applied to ensure effective product performance. Make regular inspections to all coated areas. Problem areas should be attended to immediately and maintenance coats should be routinely applied. If the coating is allowed to weather beyond the regular maintenance period of 1 year, returning this surface to excellent condition will be more difficult. Before application of a maintenance coat of Cetol® Marine Light, clean the surface with Interlux All Purpose Boat Soap to remove any surface contaminants as per instructions on label. If blue fungi or mildew are present then they can be treated with Interlux Premium Teak Restorer with a nylon scruffing pad as per instructions on label. Rinse with fresh water and allow to dry. Sand lightly with 220-320 (grade) grit paper. …\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"Default Title","offer_id":50581707260162,"sku":"ILX-IVA-290Q","price":59.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/ILX-IVA-290Q__51477.1722361738_19e2b680-c4c3-442a-8baf-a32696360db8.webp?v=1791078371"},{"product_id":"interlux-sikkens-cetol-marine-wood-finish","title":"Interlux Paint Sikkens Cetol Marine Wood Finish","description":"\u003cp\u003eInterlux Sikkens Cetol Marine Wood Finish\u003c\/p\u003e\u003cp\u003eInterlux Sikkens Cetol Marine Wood Finish produces an attractive dark amber appearance on wood. Sikkens Cetol Marine is a durable, translucent protective wood finish for use above the waterline on interior or exterior woods. Cetol Marine Finishes feature Next Wave Technology: the next generation of finishes with a unique UV package of advanced ultra violet absorbers that provide greater protection, durability, and longevity. Cetol Marine has excellent weathering properties and is flexible, allowing for the natural expansion and contraction of wood. This easy to apply finish has been specially formulated to protect wood and keep it looking beautiful.\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eFinish: Satin\u003c\/p\u003e\u003cp\u003eCoverage: Approx. 360 ft²\/gal.\u003c\/p\u003e\u003cp\u003eNumber of Coats: 2-3\u003c\/p\u003e\u003cp\u003eSuitable for interior and exterior wood applications above the waterline\u003c\/p\u003e\u003cp\u003eProduces dark amber appearance\u003c\/p\u003e\u003cp\u003eAssociated Products:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInterlux Special Thinner: Clean-up on painted surfaces\u003c\/li\u003e\n\u003cli\u003eIf Cetol Marine is spilled onto a painted surface, use Interlux Special Thinner to clean. Do not allow excess thinner to remain on painted surface.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eHow to Apply Interlux Sikkens Cetol Marine Wood Finish\u003c\/p\u003e\u003cp\u003eFollow preparation procedures\u003c\/p\u003e\u003cp\u003eOne coat Cetol Marine Finish\u003c\/p\u003e\u003cp\u003eAllow 24 hours for drying\u003c\/p\u003e\u003cp\u003eOne coat Cetol Marine Finish\u003c\/p\u003e\u003cp\u003eAllow 24 hours for drying\u003c\/p\u003e\u003cp\u003eOne coat Cetol Marine Finish\u003c\/p\u003e\u003cp\u003eApplication: Use a long haired natural bristle brush. Apply in direction of grain.\u003c\/p\u003e\u003cp\u003eNumber of Coats: 3\u003c\/p\u003e\u003cp\u003eApplication Do's: Apply when temperature is between 50°F and 95°F. Saturate all end grains and apply liberal coats. Maintain a wet edge and apply in direction of grain.For application, use a long haired natural bristle brush. Don't apply in direct sunlight or when surface is hot to touch. Do not apply in wet weather or when the moisture content is greater than 18%. Sikkens Cetol Marine Finish should not be applied below the waterline.\u003c\/p\u003e\u003cp\u003eSurface Preparation Procedures:\u003c\/p\u003e\u003cp\u003eNew Exterior\/Interior Wood:\u003c\/p\u003e\u003cp\u003eWipe the wood with Interlux Special Thinner 216 to remove any natural surface oils and contaminants. Once dry, sand surface with 180-220 grit sandpaper, always sand along the length of the grain. Remove all sanding dust by vacuuming the surface.\u003c\/p\u003e\u003cp\u003eWipe the surface with Interlux Special Thinner 216 and allow to dry before applying Cetol products.\u003c\/p\u003e\u003cp\u003eNote: If the wood is exposed for more than 24 hours, clean the surface again with Interlux Special Thinner 216 in order to remove any surface contaminants.\u003c\/p\u003e\u003cp\u003eExterior\/Interior – Previously Coated Wood (Non-Cetol Marine Products):\u003c\/p\u003e\u003cp\u003eRemove all existing coatings before applying Cetol. To remove old coating, either sand with 120-180 grit sandpaper or use Interlux Inter strip 299E chemical stripper specifically designed f or marine use.\u003c\/p\u003e\u003cp\u003eOnce previous coating is removed, follow instructions for New Exterior\/Interior Wood.\u003c\/p\u003e\u003cp\u003eExterior – Weathered Wood or Previously Oiled Wood:\u003c\/p\u003e\u003cp\u003eTo ensure proper adhesion of Cetol products on weathered or previously oiled wood, use Interlux Premium Teak Restorer with a nylon scuffing pad as per instructions on label. Be sure to rinse the wood well with clean water to remove surface dirt and allow to dry thoroughly. This should be followed by the preparation procedures for New Exterior\/Interior Wood.\u003c\/p\u003e\u003cp\u003eBlue Fungi and Mildew:\u003c\/p\u003e\u003cp\u003ePersistent blue fungi or mildew may be treated by using Teak Restorer with a nylon scuffing pad as per instructions on label. Be sure to rinse the wood well with clean water to remove surface dirt and allow to dry thoroughly for three full days before applying Cetol Marine products.\u003c\/p\u003e\u003cp\u003eApplication Procedure:\u003c\/p\u003e\u003cp\u003eFollow preparation procedures\u003c\/p\u003e\u003cp\u003eApply one coat of Interlux Sikkens Cetol Marine Wood Finish\u003c\/p\u003e\u003cp\u003eWait 24 hours\u003c\/p\u003e\u003cp\u003eApply second coat of Interlux Sikkens Cetol Marine Wood Finish\u003c\/p\u003e\u003cp\u003eWait 24 hours\u003c\/p\u003e\u003cp\u003eApply third coat of Interlux Sikk…\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"5606627","offer_id":50581707391234,"sku":"ILX-IVA-300G","price":185.79,"currency_code":"USD","in_stock":true},{"title":"5606629","offer_id":50581707424002,"sku":"ILX-IVA-300Q","price":59.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/421679_source_1528743875_6399795c-c5c7-4460-9772-380b941dd074.jpg?v=1791078372"},{"product_id":"interlux-sikkens-cetol-marine-gloss-finish","title":"Interlux Paint Cetol Marine High Gloss Qt","description":"\u003cp\u003eInterlux Sikkens Cetol Marine Gloss Finish\u003c\/p\u003e\u003cp\u003eInterlux Sikkens Cetol Marine Gloss with Next Wave UV-absorbing technology is a durable clear gloss protective wood finish, developed as a topcoat for Cetol Marine, Cetol Marine Light and Cetol Marine Natural Teak. Next Wave technology is the next generation of Cetol Marine from Sikkens with a unique UV-absorbing package, which is specialty resins and advanced UV absorbers that provide greater protection, durability and longevity. Cetol Marine Gloss provides a high gloss, hard wearing, UV protection and an easy to clean finish. It can be used where a gloss appearance is preferred on top of Cetol Marine, Cetol Marine Light and Cetol Marine Natural Teak.\u003c\/p\u003e\u003cp\u003eCetol Marine Natural Teak Finish can be used on exterior and interior hardwood varieties such as teak, mahogany and oak. Cetol products should only be applied above the waterline. Do not use on decks.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eDurable, clear gloss finish\u003c\/p\u003e\u003cp\u003eMicroporous, which allows wood to breathe\u003c\/p\u003e\u003cp\u003eUnique formula shields wood against sunlight\u003c\/p\u003e\u003cp\u003eExcellent weathering properties\u003c\/p\u003e\u003cp\u003eFlexible, allowing for the natural expansion and contraction of wood\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eFinish: Gloss\u003c\/p\u003e\u003cp\u003eCoverage: 360 ft²\/gal\u003c\/p\u003e\u003cp\u003eNumber of Coats: 2-3\u003c\/p\u003e\u003cp\u003eHow to Apply Sikkens Cetol Marine Gloss Finish\u003c\/p\u003e\u003cp\u003eIf a high gloss finish is desired, Cetol Marine Gloss can be applied after the initial application of three coats of Cetol Marine, Marine Light, or Cetol Marine Natural Teak. If a brilliant high gloss finish is desired, lightly sand between coats of Cetol Marine Gloss using 220-320 grit sandpaper. In this case, Sikkens recommends the application of a third coat of Cetol Marine Gloss to compensate for the reduced layer thickness .Apply all coats within 1-2 weeks.\u003c\/p\u003e\u003cp\u003eFinish: Gloss\u003c\/p\u003e\u003cp\u003eApplication Method: Brush\u003c\/p\u003e\u003cp\u003eNumber of Coats: 2-3\u003c\/p\u003e\u003cp\u003eCoverage: 400 sq. ft\/gal.\u003c\/p\u003e\u003cp\u003eApplication Temp: 50°F Min. \/ 95°F Max.\u003c\/p\u003e\u003cp\u003eThinner: Do Not Thin\u003c\/p\u003e\u003cp\u003eRecommended DFT: 0.6 mils dry\u003c\/p\u003e\u003cp\u003eRecommended WFT: 1.2 mils wet\u003c\/p\u003e\u003cp\u003eDRY TIMES:\u003c\/p\u003e\u003cp\u003eTemp\u003c\/p\u003e\u003cp\u003eTo Touch\u003c\/p\u003e\u003cp\u003eTo Hard Dry\u003c\/p\u003e\u003cp\u003eTo Recoat\u003c\/p\u003e\u003cp\u003e73°F\u003c\/p\u003e\u003cp\u003e4 HR\u003c\/p\u003e\u003cp\u003e24 HR\u003c\/p\u003e\u003cp\u003e24 HR\u003c\/p\u003e\u003cp\u003eCetol® Marine Gloss is a gloss topcoat that can only be applied on top of a minimum of 2 coats of Cetol® Marine, Cetol® Marine Light or Cetol® Marine Natural Teak.\u003c\/p\u003e\u003cp\u003eApplication Information:\u003c\/p\u003e\u003cp\u003eThe wood moisture content should be below 18% before application.\u003c\/p\u003e\u003cp\u003eApply liberally using a long-haired bristle brush, smoothly, in the direction of the wood grain.\u003c\/p\u003e\u003cp\u003eKeep a wet edge to prevent lap marks and thoroughly saturate end grains where possible.\u003c\/p\u003e\u003cp\u003eApply 2-3 coats of Cetol Marine Gloss.\u003c\/p\u003e\u003cp\u003eAlways allow 24 hours drying time in between coats.\u003c\/p\u003e\u003cp\u003eApply all coats within 1-2 weeks.\u003c\/p\u003e\u003cp\u003eClick to Download Sikkens Cetol Marine Gloss Application Instructions\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is Interlux Sikkens Cetol Marine Gloss Finish used for? Interlux Sikkens Cetol Marine Gloss Finish is a durable clear gloss wood topcoat designed for use over Cetol Marine, Cetol Marine Light, or Cetol Marine Natural Teak. It provides a high-gloss, easy-to-clean finish with UV protection and flexibility to accommodate the natural expansion and contraction of wood.\u003c\/li\u003e\n\u003cli\u003eCan Interlux Sikkens Cetol Marine Gloss be used directly on bare wood? No. Cetol Marine Gloss is a topcoat and must be applied over a minimum of two coats of Cetol Marine, Cetol Marine Light, or Cetol Marine Natural Teak. Cetol products should only be used above the waterline and should not be applied to decks.\u003c\/li\u003e\n\u003cli\u003eHow many coats of Cetol Marine Gloss should I apply? Apply 2-3 coats of Cetol Marine Gloss by brush. If lightly sanding between coats with 220-320 grit sandpaper for a brilliant high-gloss finish, Sikkens recommends applying a third coat to compensate for the reduced layer thickness.\u003c\/li\u003e\n\u003cli\u003eWhat types of wood can Cetol Marine Gloss be used on? Cetol Marine Gloss can be used as a gloss topcoat over Cetol Marine, Cetol Marine Light, or Cetol Marine Natural Teak. The Cetol Marine Natural Teak system can b…\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Interlux Paint","offers":[{"title":"Default Title","offer_id":50581707555074,"sku":"ILX-IVA-315Q","price":65.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/ILX-IVA-315Q__13517.1722508664_9067babc-ccca-456d-8c10-0002aae2f558.webp?v=1791078373"},{"product_id":"interlux-sikkens-cetol-marine-natural-teak-finish","title":"Interlux Paint Sikkens Cetol Marine Natural Teak Finish","description":"\u003cp\u003eInterlux Sikkens Cetol Marine Natural Teak Finish\u003c\/p\u003e\u003cp\u003eOver time, all the potential environmental hazards, such as saltwater, wind, and scorching sun rays, can have their way with teak furniture and decking. Protect your investment with Sikkens Cetol Marine Natural Teak Finish. Cetol Marine’s Natural Teak formula actually enhances the natural wood grain, while its specially formulated UV- absorbing technology provides added protection with a durable, translucent, and protective wood finish. Sikkens Cetol marine natural teak is designed for use above the waterline on all interior and exterior woods. Sikkens Cetol Marine’s proprietary Next Wave technology features a unique UV-absorbing package, made from specialty resins and advanced UV absorbers. These special alkyd resin compounds and high-quality synthetic UV-absorbing pigments combine to create a “sunscreen” for enhanced color retention and wood protection.\u003c\/p\u003e\u003cul\u003e\u003cli\u003eWhat is Next Wave technology? Next Wave technology is a UV-absorbing formula that acts as a sunscreen, ro protect wood by deflecting the damaging effects of the sun's UV rays. Next Wave will extend the longevity of the wood’s finish and enhance its color retention. The unique UV-absorbing finish in Sikkens Cetol Marine products protects the natural finish of wood and extends the beauty of the finish and the service life of your teak deck or deck furniture. Cetol Marine Natural Teak Finish can be used on exterior and interior hardwoods such as teak, mahogany, and oak. Sikkens Cetol Marine products should only be applied above the waterline. Specifications:\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eFinish: Satin\u003c\/p\u003e\u003cp\u003eNumber of Coats:2-3\u003c\/p\u003e\u003cp\u003eCoverage:Approx. 360 ft²\/gal\u003c\/p\u003e\u003cp\u003eHow To Apply Sikkens Cetol Marine Natural Teak Finish\u003c\/p\u003e\u003cp\u003eFollow preparation procedures\u003c\/p\u003e\u003cp\u003eOne coat Cetol Natural Teak\u003c\/p\u003e\u003cp\u003eAllow 24 hours for drying\u003c\/p\u003e\u003cp\u003eOne coat Cetol Natural Teak\u003c\/p\u003e\u003cp\u003eAllow 24 hours for drying\u003c\/p\u003e\u003cp\u003eOne coat Cetol Natural Teak\u003c\/p\u003e\u003cp\u003eApplication: Use a long haired natural bristle brush. Apply in the direction of the grain.\u003c\/p\u003e\u003cp\u003eNumber of Coats: 3\u003c\/p\u003e\u003cp\u003eApplication Dos: Apply when temperature is between 50°F and 95°F. Saturate all end grains. Apply liberal coats and maintain a wet edge. For best results, apply in the direction of grain with a long haired natural bristle brush.\u003c\/p\u003e\u003cp\u003eDon't apply In direct sunlight or when the surface is hot to touch. Do not apply in wet weather or when moisture content is greater than 18%. Do not apply Sikkens Cetol Natural Teak Finish below the waterline.\u003c\/p\u003e\u003cp\u003eSurface Preparation:\u003c\/p\u003e\u003cp\u003eNew Exterior\/Interior Wood:\u003c\/p\u003e\u003cp\u003eWipe the wood with Interlux Special Thinner 216 to remove any natural surface oils and contaminants. Once dry, sand the surface with 180-220 grit sandpaper, always sand along the length of the grain. Remove all sanding dust by vacuuming the surface.\u003c\/p\u003e\u003cp\u003eWipe the surface with Interlux Special Thinner 216 and allow it to dry before applying Sikkens Cetol Marine products.\u003c\/p\u003e\u003cp\u003eNote: If the wood is exposed for more than 24 hours, clean the surface again with Interlux Special Thinner 216 in order to remove any surface contaminants\u003c\/p\u003e\u003cp\u003eExterior\/Interior - Previously Coated Wood (Non-Cetol Marine Products):\u003c\/p\u003e\u003cp\u003eRemove all existing coatings before applying Cetol. To remove old coating, either sand with 120-180 grit sandpaper or use Interlux Inter strip 299E chemical stripper specifically designed for marine use.\u003c\/p\u003e\u003cp\u003eOnce the previous coating is removed, follow instructions for New Exterior\/Interior Wood.\u003c\/p\u003e\u003cp\u003eExterior – Weathered Wood or Previously Oiled Wood:\u003c\/p\u003e\u003cp\u003eTo ensure proper adhesion of Cetol products on weathered or previously oiled wood, use Interlux Premium Teak Restorer with a nylon scuffing pad as per instructions on label.\u003c\/p\u003e\u003cp\u003eBe sure to rinse the wood well with clean water to remove surface dirt and allow it to dry thoroughly. This should be followed by the preparation procedures for New Exterior\/Interior Wood.\u003c\/p\u003e\u003cp\u003eBlue Fungi and Mildew:\u003c\/p\u003e\u003cp\u003ePersistent blue fungi or…\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"5606633","offer_id":50581707653378,"sku":"ILX-IVA-316G","price":185.79,"currency_code":"USD","in_stock":true},{"title":"5606635","offer_id":50581707686146,"sku":"ILX-IVA-316Q","price":59.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/421736_source_1528743767.jpg?v=1791078375"},{"product_id":"interlux-vc-17m-antifouling-bottom-paint","title":"Interlux Paint VC-17M Antifouling Bottom Paint","description":"\u003cp\u003eInterlux VC-17M Antifouling Boat Bottom Paint\u003c\/p\u003e\u003cp\u003eNew Formula as of April 2022 - Biolux is no longer included in the VC17m formula. This new formula is compatible with VC17m Extra and delivers similar performance.\u003c\/p\u003e\u003cp\u003eInterlux VC17 Bottom Paint is Only Available for Sale in the following states: NY, PA, OH, MI, WI, MN, IL, IN, SC, MD, CT, ME, MA, RI, NJ, DE, NC, GA, TX, OR, VT, KY, KS, AZ, AL, MS, NH, WV, TN, AR, OK, NV, AK, NE\u0026lt;\u003c\/p\u003e\u003cp\u003eInterlux VC-17M is a high-performance antifouling paint. Its specially formulated fluoro micro-additive provides a thin film finish. This additive also reduces both friction and drag. VC17M dries fast to a hard and very smooth surface that is ideal for racing. Interlux VC-17M bottom paint also dries to a smooth finish in far less time than competitor’s products which require days to sand and reapply their product. Additionally, VC17m provides antifouling protection in fresh water or low-fouling salt water, against zebra mussels and other marine organisms known to cause fouling.\u003c\/p\u003e\u003cp\u003eAvailable in quart size and four popular colors, note that Interlux VC-17’s color may change after several weeks of immersion. (See chart below.) Applying VC-17M bottom paint is easy and drying time is minimal. This means less downtime and quicker re-launch of your boat. This product can also be used on inflatables to extend their service life.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eInterlux VC-17m bottom paint provides thin film antifouling protection- ideal for racing sailboats and powerboats\u003c\/p\u003e\u003cp\u003eFluoro micro-additive produces low friction\u003c\/p\u003e\u003cp\u003eIdeal for use in fresh and low-fouling saltwater\u003c\/p\u003e\u003cp\u003eAlso recommended for Inflatables\u003c\/p\u003e\u003cp\u003ePack Size:1 US Quart. Not Available in Gallons.\u003c\/p\u003e\u003cp\u003eColors Available: V105U Original, V106U Blue, V107U Red, V103U Black\u003c\/p\u003e\u003cp\u003eNote: Interlux VC 17m changes color after several weeks of immersion.\u003c\/p\u003e\u003cp\u003eV105U (Original): At application - copper bronze. Changes to brownish gray.\u003c\/p\u003e\u003cp\u003eV106U (Blue): At application - dark copper bronze. Changes to dark blue.\u003c\/p\u003e\u003cp\u003eV107U (Red): At application - reddish copper bronze. Changes to bright burnt red.\u003c\/p\u003e\u003cp\u003eV103U (Black): At application - dark copper bronze. Changes to black.\u003c\/p\u003e\u003cp\u003eAssociated Products:\u003c\/p\u003e\u003cp\u003eSpecial Thinner 216 - To ease the application\u003c\/p\u003e\u003cp\u003eFiberglass Solvent Wash 202 - To clean bare fiberglass prior to application\u003c\/p\u003e\u003cp\u003eFiberglass Surface Prep YMA601 - Water-based cleaner for bare fiberglass\u003c\/p\u003e\u003cp\u003eProduct Compatibility: Interlux VC 17m may be used in tandem with all antifouling paints. For best results from Interlux VC 17m antifouling bottom paint, first, remove all soft paints and any paint in poor condition from the surface to be treated. Hard paints that are in good condition may be overcoated with VC 17m bottom paint, but must be sanded thoroughly to a smooth surface prior to applying VC 17m. To prepare an optimal surface, sand first with 80-grit sandpaper and work successively up the grades to 320-grit sandpaper.\u003c\/p\u003e\u003cp\u003eInterlux VC17m\u003c\/p\u003e\u003cp\u003eInitially, in the first season and in low fouling, cold saltwater, three coats should be applied, then two coats every season after. For boats in freshwater, apply two coats initially, then one coat every season thereafter.\u003c\/p\u003e\u003cp\u003eApplication Method: Airless Spray or Roller\u003c\/p\u003e\u003cp\u003eNumber of Coats: 2 Coats Minimum\u003c\/p\u003e\u003cp\u003eCoverage: 91 sq. ft. \/ quart (roller)\u003c\/p\u003e\u003cp\u003eApplication Temp: 45°F Min. \/ 95°F Max.\u003c\/p\u003e\u003cp\u003eThinner: Interlux 216 Special Thinner 10% by volume maximum\u003c\/p\u003e\u003cp\u003eApply VC17m bottom paint using a short nap roller or 4-6-inch airless spray gun (full pressure, 60-70 thou. tip). For ease of application using rollers, add up to 10% thinner to the paint tray. If rolling, use small amounts of paint poured into a steel roller tray. Roll quickly and in one direction only. If using a sprayer, keep the nozzle 6-8 inches from the hull. NOTE: Do not use conventional spray equipment as this may result in dry spray.\u003c\/p\u003e\u003cp\u003eDry Times\u003c\/p\u003e\u003cp\u003eTemp\u003c\/p\u003e\u003cp\u003eTouch Dry\u003c\/p\u003e\u003cp\u003eOvercoating Time\u003c\/p\u003e\u003cp\u003eLaunch Time\u003c\/p\u003e\u003cp\u003e60°F\u003c\/p\u003e\u003cp\u003e5 mins\u003c\/p\u003e\u003cp\u003e10 mins\u003c\/p\u003e\u003cp\u003e20 mins\u003c\/p\u003e\u003cp\u003e77°F\u003c\/p\u003e\u003cp\u003e3 mins\u003c\/p\u003e\u003cp\u003e10 mins\u003c\/p\u003e\u003cp\u003e…\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"5673022","offer_id":50581707817218,"sku":"ILX-V105UKIT","price":114.99,"currency_code":"USD","in_stock":false},{"title":"5747180","offer_id":50581707849986,"sku":"ILX-V106UKIT","price":114.99,"currency_code":"USD","in_stock":false},{"title":"5747181","offer_id":50581707882754,"sku":"ILX-V103UKIT","price":114.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/VC17m-New-2022__11393.1722500054.jpg?v=1791078376"},{"product_id":"interlux-vc-offshore-antifouling-bottom-paint","title":"Interlux Paint VC Offshore Antifouling Bottom Paint","description":"\u003cp\u003eInterlux VC Offshore Antifouling Boat Bottom Paint\u003c\/p\u003e\u003cp\u003eFormulated for high-performance boats, Interlux VC Offshore Antifouling Bottom Paint delivers a smooth, ultra-durable finish that resists fouling while reducing drag. This hard, low-friction VC Offshore paint is ideal for racing and powerboats, providing superior protection in saltwater and freshwater environments. Its fast-drying, solvent-based formula allows for easy sanding and burnishing, ensuring maximum speed and efficiency on the water. With no paint buildup over time, it's the perfect choice for boaters who demand top-tier performance and long-lasting antifouling protection. Available in blue, red, or black to complement your vessel.\u003c\/p\u003e\u003cp\u003eSold in Gallons\u003c\/p\u003e\u003cp\u003eVC Offshore for racing, sailing and performance power boats is formulated with Fluoro microadditive for a hard, smooth low friction surface that can be burnished to a very low profile. When polished, VC Offshore yields a very hard finish for maximum durability and reduced friction for increased performance. VC Offshore is suitable for use in fresh and salt water.\u003c\/p\u003e\u003cp\u003eFor racing, sailing and power boats\u003c\/p\u003e\u003cp\u003eSuitable for fresh and salt water\u003c\/p\u003e\u003cp\u003eHard, Smooth finsh\u003c\/p\u003e\u003cp\u003eLow friction finish\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eFinish: Matte\u003c\/p\u003e\u003cp\u003eNumber of Coats: 3-4\u003c\/p\u003e\u003cp\u003eAvailable in 3 colors:\u003c\/p\u003e\u003cp\u003eBlack (ILX-V118)\u003c\/p\u003e\u003cp\u003eBlue (ILX-V116)\u003c\/p\u003e\u003cp\u003eRed (ILX-V117)\u003c\/p\u003e\u003cp\u003eInterlux Special Thinner: For thinning and clean-up\u003c\/p\u003e\u003cp\u003eHow to Apply\u003c\/p\u003e\u003cp\u003eAPPLICATION DATA METHOD: Brush, Conventional Spray, Roller(Pressure Pot)\u003c\/p\u003e\u003cp\u003eNUMBER OF COATS: 3\u003c\/p\u003e\u003cp\u003eDRY FILM THICKNESS PER COAT: 2 mils (5.1 wet mils)\u003c\/p\u003e\u003cp\u003eCOVERAGE: 300 sq. ft\/gal.\u003c\/p\u003e\u003cp\u003eAPPLICATION TEMP: 50° F. Min. \/ 95°F. Max.\u003c\/p\u003e\u003cp\u003eTHINNER: Viny-Lux® Solvent 355 or Special Thinner 216\u003c\/p\u003e\u003cp\u003eDRY TIMES:\u003c\/p\u003e\u003cp\u003eTemp\u003c\/p\u003e\u003cp\u003eTo Touch\u003c\/p\u003e\u003cp\u003eTo Recoat\u003c\/p\u003e\u003cp\u003eTo Launch\u003c\/p\u003e\u003cp\u003e95°F\u003c\/p\u003e\u003cp\u003e1 HR\u003c\/p\u003e\u003cp\u003e4 HR\u003c\/p\u003e\u003cp\u003e8 HR\u003c\/p\u003e\u003cp\u003e73°F\u003c\/p\u003e\u003cp\u003e2 HR\u003c\/p\u003e\u003cp\u003e6 HR\u003c\/p\u003e\u003cp\u003e12 HR\u003c\/p\u003e\u003cp\u003e50°F\u003c\/p\u003e\u003cp\u003e3 HR\u003c\/p\u003e\u003cp\u003e12 HR\u003c\/p\u003e\u003cp\u003e16 HR\u003c\/p\u003e\u003cp\u003ePREVIOUSLY PAINTED SURFACES: Remove, unless it is vinyl based. Scrape and sand old vinyl coatings which are not adhering, clean and dry surface. Remove antifouling paint in poor condition with Interstrip Semi-Paste 299E.\u003c\/p\u003e\u003cp\u003eBARE FIBERGLASS: Begin by scrubbing well using soap and water and a stiff brush. Rinse with fresh water. Sand with 80 grade (grit) paper. Remove sanding residue. Wipe with Fiberglass Solvent Wash 202.\u003c\/p\u003e\u003cp\u003eBARE WOOD: Sand with 80 grade (grit) paper. Clean with Special Thinner 216. Apply 1st coat thinned 10% with VinyLux® Solvent 355.\u003c\/p\u003e\u003cp\u003eBARE METAL: Sandblast and apply 4-5 coats of Interprotect® 2000E\/2001E. If blasting is not possible (or if more than 2 hours has passed since blasting) sand or grind with coarse emery cloth and apply a self-etching primer prior to Interprotect 2000E\/2001E or Interprotect 3000\/3001.\u003c\/p\u003e\u003cp\u003eDO NOT USE THIS PRODUCT ON ALUMINUM HULLS AND OUTDRIVES.\u003c\/p\u003e\u003cp\u003eAPPLICATION INFORMATION: Apply 3 coats of VC Offshore*. BURNISHING: After the final coat of VC Offshore* has cured, wet sand with 400 grade (grit) paper, removing any imperfections in the coat. Burnish with fine bronze wool until a shiny, super smooth finish is obtained. Apply an extra coat if wet sanding or burnishing. Conventional Spray Pressure Pot: Pressure: 3.44-4.08 bar\/50-60 psi (gun pressure), pot pressure 10-15 psi. Tip Size: 1.8-2.2 mm\/70-85 thou. Spraying of antifouling paints is prohibited in Canada. Other Do not apply thin coats. Do not apply VC Offshore* in thin coats as this will lead to a rougher surface and additional sanding. It may also lead to premature fouling. Product temperature should be minimum 10°C\/50°F and maximum 29°C\/85°F. Ambient temperature should be minimum 10°C\/50°F and maximum 29°C\/85°F. Substrate temperature should be minimum 10°C\/50°F and maximum 29°C\/85°F. Apply to clean, dry, properly prepared surfaces only. Bare surfaces must be sanded. Do not apply VC Offshore* over non-vinyl antifouling paints. Do not apply VC Offshore* over aluminum. Do not use on aluminum boats, out…\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"5608358","offer_id":50581708013826,"sku":"ILX-V116G","price":587.99,"currency_code":"USD","in_stock":true},{"title":"5608361","offer_id":50581708046594,"sku":"ILX-V118G","price":587.99,"currency_code":"USD","in_stock":true},{"title":"Gallon","offer_id":50581708079362,"sku":"ILX-V117G","price":587.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/ilx-v116g_lg__74349.1722350791.webp?v=1791078377"},{"product_id":"interlux-vc-performance-epoxy-bottom-finish","title":"Interlux Paint Vc Performance Epoxy 2-Part Kit","description":"\u003cp\u003eInterlux VC Performance Epoxy Boat Bottom Paint\u003c\/p\u003e\u003cp\u003eSold as kit Makes 2 Gallons.\u003c\/p\u003e\u003cp\u003eVC Performance is a fluoro microadditive bearing two-part epoxy for use on the underwater surfaces of high performance boats. Apply to gelcoat, bare fiberglass, epoxy and primed metal surfaces. Dries to a hard, somewhat slippery, semi-gloss white finish that is ideal for wet sanding and burnishing. The hard, stain-resistant finish is also ideal for rack-stored and trailered boats or boats that are kept in the water (not requiring antifouling properties). VC Performance has no antifouling or foul release properties.\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eFinish: Semi-gloss\u003c\/p\u003e\u003cp\u003eMix Ratio: 1 : 1 by volume\u003c\/p\u003e\u003cp\u003eNumber of Coats: 3-4 as needed\u003c\/p\u003e\u003cp\u003eCoverage: 199.9 ft²\/gal by spray\u003c\/p\u003e\u003cp\u003eInterlux Reducing Solvent: Thinner; thin, if necessary, after induction\u003c\/p\u003e\u003cp\u003e*****WILL SHIP TO CONTINENTAL 48 STATES GROUND ONLY****\u003c\/p\u003e\u003cp\u003eHow To Apply\u003c\/p\u003e\u003cp\u003eAPPLICATION DATA METHOD: Airless Spray, Brush, Conventional Spray, Roller- Pressure Pot or Siphon Cup\u003c\/p\u003e\u003cp\u003eNUMBER OF COATS: 3-4\u003c\/p\u003e\u003cp\u003eDRY FILM THICKNESS PER COAT: 3.6 mils\u003c\/p\u003e\u003cp\u003eCOVERAGE: 200 sq. ft\/gal.\u003c\/p\u003e\u003cp\u003eAPPLICATION TEMP: 50°F Min. \/ 95°F Max.\u003c\/p\u003e\u003cp\u003eTHINNER: Reducing Solvent 2316N\u003c\/p\u003e\u003cp\u003eDRY TIMES:\u003c\/p\u003e\u003cp\u003eTemp\u003c\/p\u003e\u003cp\u003eTo Touch\u003c\/p\u003e\u003cp\u003eTo Recoat\u003c\/p\u003e\u003cp\u003ePot Life\u003c\/p\u003e\u003cp\u003eTo Launch\u003c\/p\u003e\u003cp\u003e95°F\u003c\/p\u003e\u003cp\u003e2 HR\u003c\/p\u003e\u003cp\u003e4 HR\u003c\/p\u003e\u003cp\u003e4 HR\u003c\/p\u003e\u003cp\u003e3 DAY\u003c\/p\u003e\u003cp\u003e73°F\u003c\/p\u003e\u003cp\u003e2 HR\u003c\/p\u003e\u003cp\u003e5 HR\u003c\/p\u003e\u003cp\u003e5 HR\u003c\/p\u003e\u003cp\u003e4 DAY\u003c\/p\u003e\u003cp\u003e50°F\u003c\/p\u003e\u003cp\u003e3 HR\u003c\/p\u003e\u003cp\u003e6 HR\u003c\/p\u003e\u003cp\u003e6 HR\u003c\/p\u003e\u003cp\u003e7 DAY\u003c\/p\u003e\u003cp\u003eNote: Maximum Immersion Times are as follows: 10-35°C\/50-95°F - 60 days\u003c\/p\u003e\u003cp\u003eBARE FIBERGLASS: Begin by scrubbing well using soap and water and a stiff brush. Rinse with fresh water. Wipe with Fiberglass Solvent Wash 202. Sand with 80 grade (grit) paper. Wipe with Fiberglass Solvent Wash 202.\u003c\/p\u003e\u003cp\u003eBARE METAL: Sandblast or grind to bright metal finish. Immediately apply Viny-Lux Primewash 353\/354 thinned 25% with Viny-Lux Solvent 355. Allow to dry for 1-24 hours.\u003c\/p\u003e\u003cp\u003eCLEAR EPOXY: Begin by scrubbing well using soap and water and a stiff brush. Rinse with fresh water. Wet sand with 80 grade (grit) paper. Wash down with fresh water. Wipe with Fiberglass Solvent Wash 202.\u003c\/p\u003e\u003cp\u003eAPPLICATION INFORMATION: Apply 3 coats of VC Performance Epoxy. VC Performance Epoxy is designed for spray application but can be applied by brush and rollers. Mix base and curing agent thoroughly at the specified ratio. Allow 45 mins at 50°F\/10°C and 30 mins above 77° F\/25°C for induction. Thin, if necessary, after induction. Airless Spray Pressure: 142-170 bar\/2100-2500 psi Tip Size: 0.48-0.53 mm\/19-21 thou. Conventional Spray Pressure Pot: Pressure: 3.44-4.08 bar\/50-60 psi - gun pressure; 8-15 psi pot pressure. Tip Size: 1.4-1.5 mm\/55-60 thou. Siphon Cup: Pressure: 3.06-4.08 bar\/45-60 psi. Tip Size: 1.4-1.5 mm\/55-60 thou. Other If fairing is necessary, use Interprotect Watertite between 1st and 2nd coats of VC Performance Epoxy and then apply 3 coats of VC Performance Epoxy over the Interprotect Watertite. VC Performance Epoxy can be applied to gelcoat, bare fiberglass, epoxy and properly primed metal. Apply to clean, dry, properly prepared surfaces only. VC Performance Epoxy can only be applied over two component products that are specified for underwater use. If there is any single paint (such as antifouling paint) on the surface, it must be removed and then proceed as with bare surface.\u003c\/p\u003e\u003cp\u003eMSDS\u003c\/p\u003e\u003cp\u003eClick here to download VC Performance Epoxy Bottom Finish Datasheet\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is Interlux VC Performance Epoxy designed for? Interlux VC Performance Epoxy is a two-part epoxy bottom finish designed for high performance boats. It creates a hard, smooth, semi-gloss surface that is ideal for wet sanding and burnishing to help reduce drag.\u003c\/li\u003e\n\u003cli\u003eDoes Interlux VC Performance Epoxy provide antifouling protection? No. Interlux VC Performance Epoxy does not have antifouling or foul release properties. It is intended for boats that do not require antifouling protection.\u003c\/li\u003e\n\u003cli\u003eWhat surfaces can Interlux VC Performance Epoxy be applied to? Interlux VC P…\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Interlux Paint","offers":[{"title":"Default Title","offer_id":50581708210434,"sku":"ILX-V127KITG","price":303.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/ilx-v127kitg_lg__23813.1722361287.webp?v=1791078378"},{"product_id":"interlux-ultra-kote-hard-antifouling-bottom-paint","title":"Interlux Paint Ultra-Kote Hard Antifouling Bottom Paint","description":"\u003cp\u003eInterlux Ultra-Kote Hard Antifouling High Copper Bottom Paint\u003c\/p\u003e\u003cp\u003eFor tough, long-lasting protection, Interlux Ultra Kote delivers a durable, hard finish that resists fouling in high-growth waters. This high-performance Interlux Ultra bottom paint is made to withstand heavy use, making it ideal for powerboats and racing vessels that demand a smooth, efficient hull. Its advanced formula provides excellent adhesion and wear resistance, ensuring season-long antifouling protection. Ultra Kote offers reliable defense against barnacles and algae while maintaining a sleek, fuel-efficient surface. Available in blue, black, green or red.\u003c\/p\u003e\u003cp\u003eProtect your vessel with Interlux Ultra-Kote Bottom Paint, formulated to keep your hull free from fouling and optimized for performance. This hard, durable coating provides excellent protection against all types of marine growth, ensuring your boat maintains its speed and efficiency. Ideal for boats in high-fouling areas, Ultra-Kote offers a strong defense, keeping your underwater surfaces clean and smooth season after season.\u003c\/p\u003e\u003cp\u003eThe Interlux Ultra-Kote is a high performance antifouling paint that is perfect for areas that experience moderate to severe fouling. Designed to provide maximum performance, the high copper hard coating provides excellent long term protection from shell fouling, such as barnacles. Thanks to the fast drying formula Ultra-Koat allows you to paint and launch in the same day. Can be used on Fiberglass, wood, or properly primed still with the addition of color stability for a uniform look. Able to be used in fresh water, salt water, \u0026amp; brackish water.\u003c\/p\u003e\u003cp\u003eNote: Green Ultra-Kote (Part Number Y3559U1) is not available to ship to California\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eWorks on Fiberglass, wood, and steel boats\u003c\/p\u003e\u003cp\u003eFor use in Fresh water, Salt water, \u0026amp; Brackish water\u003c\/p\u003e\u003cp\u003eFast dry formula\u003c\/p\u003e\u003cp\u003eHigh Copper\u003c\/p\u003e\u003cp\u003eLong term protection\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003ePack Size: US Gallon\u003c\/p\u003e\u003cp\u003eFinish: Matte\u003c\/p\u003e\u003cp\u003eRecommended usage: All fouling waters\u003c\/p\u003e\u003cp\u003eColors Available: Red (Y3449U), Green (Y3559U), Blue (Y3669U), Black Y3779U\u003c\/p\u003e\u003cp\u003eDrying time: Touch dry 1hrs; To launch 8hrs. @73° F\u003c\/p\u003e\u003cp\u003eNumber of Coats: 2 coats, 3 on bare wood (first coat thinned)\u003c\/p\u003e\u003cp\u003eCoverage: 506 ft²\/gal\u003c\/p\u003e\u003cp\u003eVOC: 327 g\/lt\u003c\/p\u003e\u003cp\u003eHow to Apply Interlux Ultra-Kote Hard Antifouling Bottom Paint\u003c\/p\u003e\u003cp\u003eApplication Tips\u003c\/p\u003e\u003cp\u003eMixing: Stir or shake contents thoroughly before use\u003c\/p\u003e\u003cp\u003eThinner: Special Thinner 216 or Brush Ease 433\u003c\/p\u003e\u003cp\u003eThinning: Thin only if necessary. Thin no more than 10% (except conventional spray). Use Brush Ease 433 if roller or brush drags during application\u003c\/p\u003e\u003cp\u003eCleaner: Special Thinner 216 or Brush Ease 433\u003c\/p\u003e\u003cp\u003eApplicators\u003c\/p\u003e\u003cp\u003eAirless Sprayer\u003c\/p\u003e\u003cp\u003ePressure: 170-204 bar\/2500-3000 psi\u003c\/p\u003e\u003cp\u003eTip Size: .53mm \/21 thou.\u003c\/p\u003e\u003cp\u003eMust be thinned 5-10% bu volume with Special Thinner 216\u003c\/p\u003e\u003cp\u003eConventional Spray\u003c\/p\u003e\u003cp\u003ePressure Pot: Pressure : 3.44-4.47 bar\/50-65 psi (gun pressure); 10-15 psi (pot pressure)\u003c\/p\u003e\u003cp\u003eTip Size: 1.83-2.2 mm\/70-85 thou.\u003c\/p\u003e\u003cp\u003eThin 10-15\" with Special Thinner 216 for application by Pressure Pot\u003c\/p\u003e\u003cp\u003eRoller\u003c\/p\u003e\u003cp\u003eUse a 3\/8\" nap solvent resistant roller\u003c\/p\u003e\u003cp\u003eSurface Preparation\u003c\/p\u003e\u003cp\u003eGood Condition\u003c\/p\u003e\u003cp\u003eRemove all traces of loose paint \u0026amp; contamination by sanding\u003c\/p\u003e\u003cp\u003eSand using an 80 grit wet-dry sandpaper\u003c\/p\u003e\u003cp\u003eRemove sanding residue\u003c\/p\u003e\u003cp\u003ePoor Condition\u003c\/p\u003e\u003cp\u003eCompletely remove all old antifouling paint\u003c\/p\u003e\u003cp\u003eFor Fiberglass \u0026amp; wood use Interstrip 299E\u003c\/p\u003e\u003cp\u003eFor Steel sandblast to a near white metal\u003c\/p\u003e\u003cp\u003eBare Fiberglass Preparation\u003c\/p\u003e\u003cp\u003eFiberglass must be properly prepared to prevent delamination\u003c\/p\u003e\u003cp\u003eRemove mold release wax using Fiberglass Surface Prep YMA601V or Fiberglass Solvent Wash 202\u003c\/p\u003e\u003cp\u003eFill any surface imperfections with Interlux Watertite\u003c\/p\u003e\u003cp\u003eOnce surface is properly prepared follow the application system below\u003c\/p\u003e\u003cp\u003eBare Fiberglass - No Sanding System\u003c\/p\u003e\u003cp\u003eClean following the above preparation procedure\u003c\/p\u003e\u003cp\u003eApply one coat of Interprotect 2000E or Fiberglass No-Sand Primer\u003c\/p\u003e\u003cp\u003eFollowing overcoating guidelines for the primer, apply 2 coats of Ultra-Kote allowing appropriate drying times\u003c\/p\u003e\u003cp\u003eBare Fiberglass - Sanding System\u003c\/p\u003e\u003cp\u003eClean fo…\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"Black","offer_id":50581708308738,"sku":"ILX-Y3779U1","price":257.99,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":50581708341506,"sku":"ILX-Y3669U1","price":257.99,"currency_code":"USD","in_stock":true},{"title":"Green","offer_id":50581708374274,"sku":"ILX-Y3559U1","price":257.99,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":50581708407042,"sku":"ILX-Y3449U1","price":257.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/886790_source_1751573037_de4648a3-964b-4de0-b1f1-f4aba4356d28.jpg?v=1791078379"},{"product_id":"interlux-act-ablative-antifouling-bottom-paint","title":"Interlux Paint ACT Ablative Antifouling Bottom Paint","description":"\u003cp\u003eInterlux ACT Ablative Antifouling Bottom Paint\u003c\/p\u003e\u003cp\u003eInterlux ACT is a trusted single-season ablative bottom paint that delivers excellent season-to-season protection in moderate to heavy fouling waters. Using Ablative Copolymer Technology, the coating slowly wears away with use, continually exposing fresh biocide at the surface. This controlled erosion helps prevent marine growth while eliminating the heavy paint build-up and aggressive sanding associated with many hard bottom paints.\u003c\/p\u003e\u003cp\u003eWith a higher copper content and a built-in Slime Fighter additive, ACT is very effective at controlling shell fouling such as barnacles and zebra mussels, as well as weed, slime and algae. It can be used on fiberglass, wood and properly primed metal hulls (not aluminum) in fresh, salt and brackish water, making it a versatile choice for a wide range of powerboats and sailboats.\u003c\/p\u003e\u003cp\u003eAvailable in popular colors including black, blue, red, green and brown, ACT is a go-to ablative paint for boaters and boatyards looking for reliable performance and easier maintenance between haul-outs.\u003c\/p\u003e\u003cp\u003eBest Uses\u003c\/p\u003e\u003cp\u003eSingle-season antifouling protection for powerboats and sailboats\u003c\/p\u003e\u003cp\u003eBoats kept in moderate to heavy fouling waters (algae, slime, barnacles, zebra mussels)\u003c\/p\u003e\u003cp\u003eFresh, salt, and brackish water marinas and moorings\u003c\/p\u003e\u003cp\u003eOwners who want an ablative coating that minimizes paint build-up and sanding at recoat time\u003c\/p\u003e\u003cp\u003eFiberglass, wood, and properly primed steel or lead hulls below the waterline (not suitable for aluminum)\u003c\/p\u003e\u003cp\u003eKey Features \u0026amp; Benefits\u003c\/p\u003e\u003cp\u003eAblative Copolymer Technology: Coating wears away in a controlled manner during use, continuously exposing fresh biocide and helping prevent premature wear-through.\u003c\/p\u003e\u003cp\u003eHigh copper content with Slime Fighter: Formulated to control hard growth such as barnacles and zebra mussels and soft growth like weed, slime and algae, keeping the hull cleaner for longer.\u003c\/p\u003e\u003cp\u003eReduced paint build-up: Because the film gradually erodes, there is less old paint to sand off at recoat time compared to many hard bottom paints.\u003c\/p\u003e\u003cp\u003eSeason-to-season protection: Provides dependable single-season protection when applied at the recommended film thickness and coverage.\u003c\/p\u003e\u003cp\u003eAll-water versatility: Can be used in fresh, salt, and brackish waters, ideal for boats that move between different environments.\u003c\/p\u003e\u003cp\u003eFlexible application: Can be applied by brush, roller, or airless spray over most existing antifouling coatings that are in sound condition, following Interlux compatibility guidance.\u003c\/p\u003e\u003cp\u003eApplication \u0026amp; System Overview\u003c\/p\u003e\u003cp\u003eInterlux ACT can be applied over most well-adhered antifouling paints or as part of an Interlux system over properly prepared bare substrates. Always read the product label and technical datasheet before starting your bottom paint project.\u003c\/p\u003e\u003cp\u003eSubstrates: Fiberglass, wood, and properly primed steel or lead below the waterline (not for aluminum hulls or drives).\u003c\/p\u003e\u003cp\u003eExisting antifouling: Confirm compatibility using the Interlux antifouling compatibility chart. The existing coating must be aged, firmly adhered, and in good condition.\u003c\/p\u003e\u003cp\u003eCoats: Apply a minimum of two full coats, with an extra stripe coat on high-wear areas such as the waterline, chines, leading edges and rudders. Three coats are recommended on bare wood.\u003c\/p\u003e\u003cp\u003eMethods: Apply by brush, 3\/8\" nap solvent-resistant roller, or airless spray using equipment suitable for solvent-based marine coatings.\u003c\/p\u003e\u003cp\u003eStir or shake ACT thoroughly before and during application to keep the copper and resins evenly mixed. Thin only if necessary, and never more than the maximum amount specified on the label.\u003c\/p\u003e\u003cp\u003eSurface Preparation Overview\u003c\/p\u003e\u003cp\u003eProper surface preparation is critical to adhesion and antifouling performance. The summary below should be used in conjunction with the full Interlux instructions.\u003c\/p\u003e\u003cp\u003ePreviously painted surfaces – good condition\u003c\/p\u003e\u003cp\u003eScrub the bottom to remove slime, salts and loose growth, then rinse and allow to dry.\u003c\/p\u003e\u003cp\u003eSand the existing coating with 80-grit wet-or-dry paper as recommended to create …\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"Red - Gallon - Y4490U-1","offer_id":50581710078210,"sku":"ILX-Y4490U-1","price":257.79,"currency_code":"USD","in_stock":true},{"title":"Green - Gallon - Y5990U-1","offer_id":50581710110978,"sku":"ILX-Y5590U-1","price":257.79,"currency_code":"USD","in_stock":true},{"title":"Blue - Gallon - Y6690U-1","offer_id":50581710143746,"sku":"ILX-Y6690U-1","price":257.79,"currency_code":"USD","in_stock":true},{"title":"Blue - Quart - Y6690U-QT","offer_id":50581710176514,"sku":"ILX-Y6690U-QT","price":83.39,"currency_code":"USD","in_stock":true},{"title":"Black - Gallon - Y7790U-1","offer_id":50581710209282,"sku":"ILX-Y7790U-1","price":257.79,"currency_code":"USD","in_stock":true},{"title":"Black - Quart - Y7790U-QT","offer_id":50581710242050,"sku":"ILX-Y7790U-QT","price":83.39,"currency_code":"USD","in_stock":true},{"title":"Brown - Gallon - Y8890U-1","offer_id":50581710274818,"sku":"ILX-Y8890U-1","price":257.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/890263_source_1751561736.jpg?v=1791078381"},{"product_id":"interlux-schooner-marine-varnish","title":"Interlux Paint Schooner Varnish","description":"\u003cp\u003eInterlux Schooner Marine Varnish\u003c\/p\u003e\u003cp\u003eSchooner Varnish combines the very best of classic, varnish craftsmanship with the newest technology. Schooner Varnish contains ultra-violet filters to screen the sun's damaging rays for remarkable durability, excellent water resistance and silky application. Superior self-leveling property and a bright, clear, high gloss yields a pristine finish with the traditional golden color.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eSuperior self-leveling properties makes it easy to get a professional finish\u003c\/p\u003e\u003cp\u003eCreates a sought-after, traditional golden color\u003c\/p\u003e\u003cp\u003eRemarkable durability, water-resistance and UV protection\u003c\/p\u003e\u003cp\u003eSuperior self-leveling properties\u003c\/p\u003e\u003cp\u003eFor use above the waterline, for interior and exterior use\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eFinish: High Gloss\u003c\/p\u003e\u003cp\u003eNumber of Coats: 5-6 coats minimum on bare wood\u003c\/p\u003e\u003cp\u003eCoverage: 500 sq. ft. per gallon\u003c\/p\u003e\u003cp\u003ePack sizes: 1 US Quart\u003c\/p\u003e\u003cp\u003eVOC: 420 g\/lt\u003c\/p\u003e\u003cp\u003eAssociated Products\u003c\/p\u003e\u003cp\u003eInterlux 333 Thinner - To ease application for roller and brush\u003c\/p\u003e\u003cp\u003eInterlux 216 Thinner - For spraying application\u003c\/p\u003e\u003cp\u003eHow to Apply Interlux Schooner Marine Varnish\u003c\/p\u003e\u003cp\u003eApply to clean, dry, and properly prepared surfaces only. Schooner can be applied over any varnish as long as it is adhered well and has been cleaned and sanded. Do not apply two part varnishes over Schooner.\u003c\/p\u003e\u003cp\u003eApplication Methods: Airless Spray, Brush, Conventional Spray, Roller\u003c\/p\u003e\u003cp\u003eFinish: High Gloss\u003c\/p\u003e\u003cp\u003eNumber of Coats: 5-6 Coats; Bare wood: Thin first coat by 10%\u003c\/p\u003e\u003cp\u003eCoverage: (Theoretical) – 600\/gal by brush | (Practical) – 480 \/gal by brush\u003c\/p\u003e\u003cp\u003eThinner: Brush – Brushing Liquid 333 | Spray – Special Thinner 216\u003c\/p\u003e\u003cp\u003eDRY TIMES:\u003c\/p\u003e\u003cp\u003eTemperature\u003c\/p\u003e\u003cp\u003eTouch Dry\u003c\/p\u003e\u003cp\u003eOvercoated By (Min)\u003c\/p\u003e\u003cp\u003e50°F\u003c\/p\u003e\u003cp\u003e3 Hours\u003c\/p\u003e\u003cp\u003e16 Hours\u003c\/p\u003e\u003cp\u003e73°F\u003c\/p\u003e\u003cp\u003e2 Hours\u003c\/p\u003e\u003cp\u003e12 Hours\u003c\/p\u003e\u003cp\u003e95°F\u003c\/p\u003e\u003cp\u003e1 Hour\u003c\/p\u003e\u003cp\u003e8 Hours\u003c\/p\u003e\u003cp\u003e**Schooner must be sanded between coats\u003c\/p\u003e\u003cp\u003eSurface Preparation:\u003c\/p\u003e\u003cp\u003eBare Wood\u003c\/p\u003e\u003cp\u003eSand with 80 grit paper.\u003c\/p\u003e\u003cp\u003eWipe with Brushing Liquid 333.\u003c\/p\u003e\u003cp\u003eApply sealer coat of varnish reduced 10% with Brushing Liquid 333.\u003c\/p\u003e\u003cp\u003eFor plywood, apply Inter-Prime Wood Sealer Clear 1026.\u003c\/p\u003e\u003cp\u003ePreviously Varnished Wood (In Good Condition)\u003c\/p\u003e\u003cp\u003eSand surface with 120-150 grit paper and remove all dust.\u003c\/p\u003e\u003cp\u003ePreviously Varnished Wood (In Poor Condition)\u003c\/p\u003e\u003cp\u003eIf varnish is badly checked or peeling, remove finish to bare wood with Interstrip Semi-Past 299E.\u003c\/p\u003e\u003cp\u003eFollow directions for varnishing bare wood.\u003c\/p\u003e\u003cp\u003eApplication:\u003c\/p\u003e\u003cp\u003eDo not shake. Stir gently.\u003c\/p\u003e\u003cp\u003ePour the amount you expect to use in a separate container. Strain it through a paint strainer to ensure there is not contamination.\u003c\/p\u003e\u003cp\u003eApply at least 5-6 coats on bare wood and a minimum of 3 coats on previously varnished surfaces until a satisfactory finish is obtained.\u003c\/p\u003e\u003cp\u003eSand between coats using 220-320 grade (grit) paper. Remove sanding residue with a rag dampened with Brushing Liquid 333.\u003c\/p\u003e\u003cp\u003eApplication Specifications:\u003c\/p\u003e\u003cp\u003eBrush\u003c\/p\u003e\u003cp\u003eUse a clean brush that is kept specifically for varnishing. Clean brushes before use.\u003c\/p\u003e\u003cp\u003eConventional Spray - Pressure Pot\u003c\/p\u003e\u003cp\u003e3.44-4.47 bar\/50-65 psi (gun pressure); 8-10 psi (pot pressure)\u003c\/p\u003e\u003cp\u003eTip Size – .89-1.4 mm\/35-50 thou\u003c\/p\u003e\u003cp\u003eConventional Spray - Siphon Cup\u003c\/p\u003e\u003cp\u003e3.44-4.47 bar\/50-65 psi (gun pressure)\u003c\/p\u003e\u003cp\u003eTip Size – 1.5-1.8 mm\/60-70 thou\u003c\/p\u003e\u003cp\u003eRoller\u003c\/p\u003e\u003cp\u003eUse thin nap roller and “tip-off” with a clean natural bristle brush or pad.\u003c\/p\u003e\u003cp\u003eInformation sourced from the Interlux Schooner Varnishes Application Guide.\u003c\/p\u003e\u003cp\u003eClick to Download Interlux Schooner Application Instructions\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is Interlux Schooner Marine Varnish used for? Interlux Schooner Marine Varnish is a high-gloss varnish for interior and exterior surfaces above the waterline. It provides a traditional golden finish along with water resistance and UV protection. Its self-leveling properties help produce a smooth, professional-looking finish when applied to properly prepared wood or previously varnished surfaces.\u003c\/li\u003e\n\u003cli\u003eHow many coats of Interlux Schooner Varnish should be applied? Appl…\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Interlux Paint","offers":[{"title":"Default Title","offer_id":50581710373122,"sku":"ILX-Y96Q","price":59.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/Interlux-Schooner__28804.1737832000_f176d4f7-8b10-4f2d-ad87-24682a92ada9.jpg?v=1791078381"},{"product_id":"interlux-watertite-2-part-epoxy-marine-filler","title":"Interlux Paint Watertite 2-Part Epoxy Marine Filler","description":"\u003cp\u003eInterlux Watertite 2-Part Epoxy Marine Filler Compound\u003c\/p\u003e\u003cp\u003eInterlux Watertite is a quick drying 2-part epoxy filler suitable for use on Fiberglass, Metals, Epoxy and rigid Wood constructions. The formulation does not shrink and is extremely water resistant, making it suitable for osmosis damage repairs. It has a long easy-to-sand window and can be applied to a thickness of 3\/4\" without sagging. Its superior spreadability makes it an ideal glazing compound for filling small nicks and scratches.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eVery fast drying\u003c\/p\u003e\u003cp\u003eSimple 1:1 mixing ratio\u003c\/p\u003e\u003cp\u003eHigh strength and adhesion properties\u003c\/p\u003e\u003cp\u003eUse above and below the waterline\u003c\/p\u003e\u003cp\u003eFill up to 3\/4\" without sagging\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eApplication Area: Above and below water\u003c\/p\u003e\u003cp\u003eFinish: Matte\u003c\/p\u003e\u003cp\u003eNumber of Coats: As required\u003c\/p\u003e\u003cp\u003ePack sizes: 500 ml \/ 1 Lt\u003c\/p\u003e\u003cp\u003e***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***\u003c\/p\u003e\u003cp\u003eHow To Apply Interlux Watertite Epoxy Marine Filler\u003c\/p\u003e\u003cp\u003eApplication Data Method: Spatula \/ Putty Knife\u003c\/p\u003e\u003cp\u003eDry Film Thickness per Coat: 63.5 mils\u003c\/p\u003e\u003cp\u003eCoverage: 25 sq. ft\/gal.\u003c\/p\u003e\u003cp\u003eApplication Temp: 45°F Min. \/ 95°F Max.\u003c\/p\u003e\u003cp\u003eThinner: Do Not Thin\u003c\/p\u003e\u003cp\u003eDRY TIMES:\u003c\/p\u003e\u003cp\u003eTemp\u003c\/p\u003e\u003cp\u003eTo Touch\u003c\/p\u003e\u003cp\u003eSandable\u003c\/p\u003e\u003cp\u003eTo Launch\u003c\/p\u003e\u003cp\u003ePot Life\u003c\/p\u003e\u003cp\u003eTo Recoat\u003c\/p\u003e\u003cp\u003e95°F\u003c\/p\u003e\u003cp\u003e20 MIN\u003c\/p\u003e\u003cp\u003e3 HR\u003c\/p\u003e\u003cp\u003e36 HR\u003c\/p\u003e\u003cp\u003e10 MIN\u003c\/p\u003e\u003cp\u003e10 HR\u003c\/p\u003e\u003cp\u003e73°F\u003c\/p\u003e\u003cp\u003e35 MIN\u003c\/p\u003e\u003cp\u003e5 HR\u003c\/p\u003e\u003cp\u003e2 DAY\u003c\/p\u003e\u003cp\u003e15 MIN\u003c\/p\u003e\u003cp\u003e5 HR\u003c\/p\u003e\u003cp\u003e50°F\u003c\/p\u003e\u003cp\u003e50 MIN\u003c\/p\u003e\u003cp\u003e8 HR\u003c\/p\u003e\u003cp\u003e5 DAY\u003c\/p\u003e\u003cp\u003e25 MIN\u003c\/p\u003e\u003cp\u003e4 HR\u003c\/p\u003e\u003cp\u003eNote: At 7°C\/45°F the pot life is 30 mins and the product is sandable after 24 hrs, immersion after 6 days.\u003c\/p\u003e\u003cp\u003eMETAL: Above water: Pre-prime with Viny-Lux Primewash 353\/354. Apply one coat of Epoxy Primekote. Sand surface with 80-120 grade (grit) paper, wipe clean. Apply Watertite*. Below water: Prime with Interprotect 2000E or Interprotect 3000.\u003c\/p\u003e\u003cp\u003eBARE FIBERGLASS: Clean with Fiberglass Surface Prep YMA601 or Fiberglass Solvent Wash 202. Sand with 80 grade (grit) paper. Remove sanding residue.\u003c\/p\u003e\u003cp\u003eAPPLICATION INFORMATION: Mix in a 1:1 ratio by volume it is important to ensure the correct volume mix ratio is used. Mix the two components thoroughly to an even colour. Do not use below 7°C. Do not apply more than ¾\" thickness at any one time. Product temperature should be minimum 10° C\/50°F and maximum 35°C\/95°F. Ambient temperature should be minimum 7°C\/45°F and maximum 35°C\/95°F. Substrate temperature should be minimum 7°C\/45°F and maximum 35°C\/95°F. Apply using a trowel, spatula or putty knife. When the product has cured, wash with fresh water and sand with 80 grade (grit) paper. Apply to clean, dry, properly prepared surfaces only. Watertite* must be overcoated with VC Tar, VC Performance Epoxy, Interprotect 2000E\/2001E or Interprotect 3000\/3001. Do not apply topside finishes, polyester or vinylester materials over Watertite*.\u003c\/p\u003e\u003cp\u003eClick to Download Interlux Watertite Epoxy Filler Application Instructions\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is Interlux Watertite 2-Part Epoxy Marine Filler Compound used for? Interlux Watertite 2-Part Epoxy Marine Filler Compound is a quick-drying, water-resistant epoxy filler for repairing fiberglass, metals, epoxy, and rigid wood constructions. It can be used above or below the waterline and is suitable for filling small nicks and scratches as well as osmosis damage repairs.\u003c\/li\u003e\n\u003cli\u003eHow do I mix Interlux Watertite Epoxy Marine Filler? Mix the two components in a precise 1:1 ratio by volume. Thoroughly combine both components until the mixture reaches an even color. Watertite should not be thinned, and the product should not be applied below 45°F.\u003c\/li\u003e\n\u003cli\u003eHow thick can Interlux Watertite be applied? Interlux Watertite can be applied up to 3\/4 inch thick at one time without sagging. Apply it with a trowel, spatula, or putty knife to clean, dry, properly prepared surfaces. Do not exceed the 3\/4-inch maximum application thickness in a single application.\u003c\/li\u003e\n\u003cli\u003eCan Interlux Watertite be used above and below the waterline? Yes. Interlux Watertite is formulated for use …\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Interlux Paint","offers":[{"title":"1 Litre","offer_id":50581710471426,"sku":"ILX-YAV135L","price":103.99,"currency_code":"USD","in_stock":true},{"title":"5508072","offer_id":50581710504194,"sku":"ILX-YAV135","price":62.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/WatertiteEpoxyFiller__72511.1737823039_60496853-0489-4704-9d90-f67bd418fcd3.jpg?v=1791078383"},{"product_id":"interlux-trilux-33-antifouling-boat-bottom-paint","title":"Interlux Paint Trilux 33 Antifouling Boat Bottom Paint","description":"\u003cp\u003eInterlux Trilux 33 Antifouling Bottom Paint\u003c\/p\u003e\u003cp\u003eInterlux Trilux 33 is a bright colored, tin-free ablative antifouling paint that provides safe, effective protection for fiberglass, wood, steel, and aluminum boats. Specially formulated for aluminum hulls, outboards, sterndrives, and other underwater metals, it delivers dependable multi-season protection in fresh, salt, and brackish waters when applied at the recommended film thickness.\u003c\/p\u003e\u003cp\u003eTrilux 33 uses Biolux® technology to help control slime and algae growth while its slow-polishing resin system minimizes paint build-up and helps maintain a smoother, more efficient hull. Available in a range of bright colors including white, it’s an ideal choice for boaters who need strong antifouling performance on aluminum and mixed-metal applications without sacrificing appearance.\u003c\/p\u003e\u003cp\u003eBest Uses\u003c\/p\u003e\u003cp\u003eAluminum boats, including trailers, fishing boats, and small craft\u003c\/p\u003e\u003cp\u003eOutdrives, outboards, and underwater metal components when properly primed\u003c\/p\u003e\u003cp\u003eFiberglass and wood hulls below the waterline\u003c\/p\u003e\u003cp\u003eBoats kept in fresh, salt, or brackish water for extended periods\u003c\/p\u003e\u003cp\u003eOwners looking for a slow-polishing ablative paint that reduces seasonal build-up\u003c\/p\u003e\u003cp\u003eKey Features \u0026amp; Benefits\u003c\/p\u003e\u003cp\u003eSafe for aluminum: Specially formulated for use on properly primed aluminum hulls, outboards, and sterndrives, as well as other underwater metals.\u003c\/p\u003e\u003cp\u003eBright, durable colors: Available in a range of clean, bright colors including white, designed for long-lasting color stability.\u003c\/p\u003e\u003cp\u003eBiolux® slime blocking technology: Helps control slime and algae for a cleaner hull throughout the season.\u003c\/p\u003e\u003cp\u003eSlow-polishing ablative system: Coating gradually wears in a controlled way, helping prevent heavy paint build-up and reducing sanding at recoat time.\u003c\/p\u003e\u003cp\u003eMulti-season performance: Provides reliable protection in fresh, salt, and brackish water when applied at the recommended number of coats and film thickness.\u003c\/p\u003e\u003cp\u003eVersatile application: Can be applied by brush or roller over properly prepared fiberglass, wood, steel, and primed aluminum, as well as most existing antifouling paints in good condition.\u003c\/p\u003e\u003cp\u003eWhere Trilux 33 Can Be Used\u003c\/p\u003e\u003cp\u003eSubstrates: Fiberglass, wood, steel, and properly primed aluminum and underwater metals.\u003c\/p\u003e\u003cp\u003eWater types: Fresh, salt, and brackish water.\u003c\/p\u003e\u003cp\u003eTypical applications: Trailerable aluminum boats, coastal cruisers, runabouts, sailboats, and boats with outdrives or outboards that need compatible antifouling protection.\u003c\/p\u003e\u003cp\u003eCoverage \u0026amp; Recommended Film Build\u003c\/p\u003e\u003cp\u003eTheoretical coverage: Approximately 400 sq. ft\/gal (roller applied), depending on surface condition and application method.\u003c\/p\u003e\u003cp\u003eNumber of coats: A minimum of 2 full coats for most substrates; 3 coats recommended on bare wood (first coat thinned).\u003c\/p\u003e\u003cp\u003eDry film thickness: About 2 mils DFT per coat (approximately 3.6 mils wet).\u003c\/p\u003e\u003cp\u003eFinish: Low sheen.\u003c\/p\u003e\u003cp\u003eApplication Overview\u003c\/p\u003e\u003cp\u003eAlways read and follow the Interlux Trilux 33 product label and technical datasheet before starting. The surface must be clean, dry, and free of contaminants, loose coatings, and sanding residue.\u003c\/p\u003e\u003cp\u003ePreviously painted surfaces (in good condition)\u003c\/p\u003e\u003cp\u003eScrub to remove slime and contaminants, then rinse and allow to dry.\u003c\/p\u003e\u003cp\u003eSand the existing antifouling with the recommended grit to create a smooth, dull surface.\u003c\/p\u003e\u003cp\u003eRemove sanding residue and apply the recommended number of coats of Trilux 33.\u003c\/p\u003e\u003cp\u003eBare aluminum and other underwater metals\u003c\/p\u003e\u003cp\u003eClean thoroughly to remove grease, oil, and oxidation, then sand or blast to a bright metal finish as specified by Interlux.\u003c\/p\u003e\u003cp\u003ePrime bare aluminum and metal surfaces with the recommended Interlux primers (such as InterProtect® 2000E\/2001E or Primocon®), observing all dry and recoat times.\u003c\/p\u003e\u003cp\u003eApply the specified number of coats of Trilux 33 over the primed surface.\u003c\/p\u003e\u003cp\u003eBare fiberglass\u003c\/p\u003e\u003cp\u003eRemove mold-release agents and wax with Fiberglass Solvent Wash 202 or equivalent fiberglass prep.\u003c\/p\u003e\u003cp\u003eFollow either the no-sand primer system or the sanding system recommended by Interlux before applying …\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"5608632","offer_id":50581710602498,"sku":"ILX-YBA060Q","price":137.99,"currency_code":"USD","in_stock":true},{"title":"5608633","offer_id":50581710635266,"sku":"ILX-YBA063G","price":469.39,"currency_code":"USD","in_stock":true},{"title":"5608641","offer_id":50581710668034,"sku":"ILX-YBA068G","price":469.49,"currency_code":"USD","in_stock":true},{"title":"5608643","offer_id":50581710700802,"sku":"ILX-YBA068Q","price":137.99,"currency_code":"USD","in_stock":true},{"title":"Gallon","offer_id":50581710733570,"sku":"ILX-YBA060G","price":469.49,"currency_code":"USD","in_stock":true},{"title":"Quart","offer_id":50581710766338,"sku":"ILX-YBA063Q","price":137.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/Trilux33_1GLUS__08369.1739293450.webp?v=1791078384"},{"product_id":"interlux-trilux-boat-prop-drive-antifouling-paint","title":"Interlux Paint Trilux Boat Prop \u0026 Drive Antifouling Paint","description":"\u003cp\u003eInterlux Trilux Boat Prop \u0026amp; Drive Antifouling Spray Paint\u003c\/p\u003e\u003cp\u003eShield metal components from marine growth and corrosion with Interlux Trilux Prop \u0026amp; Drive Antifouling Paint. This easy-to-apply spray is formulated for underwater metals like propellers, outdrives, and lower units. It creates a tough barrier that resists fouling and slows down corrosion, helping your propulsion system perform at its best season after season. Designed for continuous submersion, it’s ideal for boats in saltwater or freshwater environments. For boaters who want fewer maintenance headaches and longer equipment life, Trilux provides targeted protection where it matters most.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eConvenient aerosol can provide effective antifouling\u003c\/p\u003e\u003cp\u003eInterlux’ exclusive Biolux technology reduces slime and increases antifouling performance\u003c\/p\u003e\u003cp\u003eSafe for all out drive and underwater metals\u003c\/p\u003e\u003cp\u003eCan be used in fresh, salt, and brackish water\u003c\/p\u003e\u003cp\u003eOnly available in 12 oz. aerosol can\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eSize: 12 fl. oz.\u003c\/p\u003e\u003cp\u003eFinish: Matte\u003c\/p\u003e\u003cp\u003eCoverage (approx): 21.2 ft² per spray can\u003c\/p\u003e\u003cp\u003eNumber of Coats: 1-2 as needed\u003c\/p\u003e\u003cp\u003eColors Available: YBA063A Black, YBA064A Gray, YBA068A White\u003c\/p\u003e\u003cp\u003eVOC: 470 g\/lt\u003c\/p\u003e\u003cp\u003eIt is important that you shake can well before use. If can is not shaken properly, clogging of the tip may occur.\u003c\/p\u003e\u003cp\u003eHow To Apply Interlux Trilux 33 Aerosol Paint\u003c\/p\u003e\u003cp\u003ePrior to application, shake can well. Listen for mixing-ball and continue shaking vigorously for at least two minutes. Shake in an up and down motion. If not shaken properly, tip may clog.\u003c\/p\u003e\u003cp\u003eApplication Method: Aerosol can\u003c\/p\u003e\u003cp\u003eNumber of Coats: 1-2 as needed. Use an entire can per lower unit.\u003c\/p\u003e\u003cp\u003eDry film thickness: 2 mils\u003c\/p\u003e\u003cp\u003eCoverage: 21.2 ft² per spray can\u003c\/p\u003e\u003cp\u003eApplication Temp: 50°F Min. \/ 95°F Max.\u003c\/p\u003e\u003cp\u003eDry Times:\u003c\/p\u003e\u003cp\u003eTemp\u003c\/p\u003e\u003cp\u003eTo Touch\u003c\/p\u003e\u003cp\u003eTo Recoat\u003c\/p\u003e\u003cp\u003eTo Launch\u003c\/p\u003e\u003cp\u003e95°F\u003c\/p\u003e\u003cp\u003e1\/2 HR\u003c\/p\u003e\u003cp\u003e4 HR\u003c\/p\u003e\u003cp\u003e8 HR\u003c\/p\u003e\u003cp\u003e73°F\u003c\/p\u003e\u003cp\u003e1\/2 HR\u003c\/p\u003e\u003cp\u003e6 HR\u003c\/p\u003e\u003cp\u003e12 HR\u003c\/p\u003e\u003cp\u003e50°F\u003c\/p\u003e\u003cp\u003e1\/2 HR\u003c\/p\u003e\u003cp\u003e12 HR\u003c\/p\u003e\u003cp\u003e16 HR\u003c\/p\u003e\u003cp\u003eSurface Preparation\u003c\/p\u003e\u003cp\u003eBare Aluminum:\u003c\/p\u003e\u003cp\u003eGrind or blast the bare aluminum to a bright metal finish.\u003c\/p\u003e\u003cp\u003eFor best results, pre-prime using an etch primer.\u003c\/p\u003e\u003cp\u003eRemove sanding residue or any dust.\u003c\/p\u003e\u003cp\u003eImmediately apply at least 3 coats of Interprotect 2000E (first coat thinned 10-15%) or one full can of Primocon Aerosol Primer YPA985\u003c\/p\u003e\u003cp\u003ePreviously Painted Surfaces\u003c\/p\u003e\u003cp\u003eIf previously painted with Trilux 33, sand with 80 grit sandpaper.\u003c\/p\u003e\u003cp\u003eIf factory finish or antifouling paint, sand with 80 grit sandpaper then clean with special thinner 216. Resand any areas where bare aluminum is exposed with medium grit emery cloth and wipe clean. Follow the procedure for bare aluminum above.\u003c\/p\u003e\u003cp\u003eEpoxy:\u003c\/p\u003e\u003cp\u003eRemove all surface contamination using Fiberglass Surface Prep YMA601.\u003c\/p\u003e\u003cp\u003eFlush with fresh water and allow to dry.\u003c\/p\u003e\u003cp\u003eSand with 80 grit paper, then remove sanding residue.\u003c\/p\u003e\u003cp\u003eWipe with Fiberglass Solvent Wash 202.\u003c\/p\u003e\u003cp\u003eApply Interprotect 2000E as primer.\u003c\/p\u003e\u003cp\u003eApplication\u003c\/p\u003e\u003cp\u003eAt least 2 coats should be applied.\u003c\/p\u003e\u003cp\u003eHold can 12-16\" from the unit when applying the paint.\u003c\/p\u003e\u003cp\u003eWait for minimum overcoating time between coats.\u003c\/p\u003e\u003cp\u003eContinue until entire can has been used per outdrive.\u003c\/p\u003e\u003cp\u003eAllow minimum immersion time.\u003c\/p\u003e\u003cp\u003eClick to Download Interlux Trilux 33 Application Instructions\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is Interlux Trilux Boat Prop \u0026amp; Drive Antifouling Spray Paint used for? Interlux Trilux Boat Prop \u0026amp; Drive Antifouling Spray Paint is designed for underwater metal components such as propellers, outdrives, and lower units. It provides antifouling protection for equipment used in fresh, salt, and brackish water. The aerosol formula uses Interlux Biolux technology to reduce slime and improve antifouling performance.\u003c\/li\u003e\n\u003cli\u003eHow many coats of Interlux Trilux Boat Prop \u0026amp; Drive Antifouling Spray Paint should be applied? Apply 1-2 coats as needed, with the application instructions recommending at least tw…\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Interlux Paint","offers":[{"title":"Black","offer_id":50581710930178,"sku":"ILX-YBA063A","price":55.99,"currency_code":"USD","in_stock":true},{"title":"Gray","offer_id":50581710962946,"sku":"ILX-YBA064A","price":55.99,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":50581710995714,"sku":"ILX-YBA068A","price":55.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/Trilux33__36842.1737833874_9276a668-360c-4150-a4b7-22dd67ad2407.jpg?v=1791078385"},{"product_id":"interlux-fiberglass-bottomkote-aqua","title":"Interlux Paint Fiberglass Bottomkote Aqua","description":"\u003cp\u003eInterlux Fiberglass Bottomkote Aqua Antifouling Boat Bottom Paint\u003c\/p\u003e\u003cp\u003eFor a tough, eco-friendly antifouling solution, you can't beat Interlux Fiberglass Bottomkote – it delivers excellent protection with a smooth, durable finish. This water-based formula resists barnacles and algae while providing fast-drying, low-odor application – perfect for DIY boaters. It's easy to clean up with soap and water and adheres well to fiberglass hulls, ensuring long-lasting performance in both saltwater and freshwater. Interlux Fiberglass Bottomkote has a hard, fast-drying finish that minimizes paint buildup, making future maintenance a breeze. Available in blue or black, it's an ideal choice for boaters looking for reliable antifouling without the harsh solvents.\u003c\/p\u003e\u003cp\u003eSolid protection against all types of fouling, including zebra muscles\u003c\/p\u003e\u003cp\u003eColorfast durable finish\u003c\/p\u003e\u003cp\u003eReduced emissions, low odor\u003c\/p\u003e\u003cp\u003eEasy clean up with soap and water\u003c\/p\u003e\u003cp\u003eThinner film, less paint build-up\u003c\/p\u003e\u003cp\u003eOnly thin if necessary, and if so, do not thin more than 10% by volume. Thin with water.\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eFinish: Matte\u003c\/p\u003e\u003cp\u003eNumber of Coats: 2-3\u003c\/p\u003e\u003cp\u003eAssociated Products\u003c\/p\u003e\u003cp\u003eInterlux Fiberglass Solvent Wash 202-To clean bare fiberglass prior to application.\u003c\/p\u003e\u003cp\u003eInterlux Fiberglass Surface Prep YMA601-Water Base cleaner for bare fiberglass.\u003c\/p\u003e\u003cp\u003eInterlux Watertite YAV135-Epoxy Filler for filling and fairing.\u003c\/p\u003e\u003cp\u003e***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***\u003c\/p\u003e\u003cp\u003e------------------------------------------------------------------------------------------------------------------\u003c\/p\u003e\u003cp\u003eHow To Apply\u003c\/p\u003e\u003cp\u003eAPPLICATION DATA METHOD: Brush, Conventional Spray, Roller\u003c\/p\u003e\u003cp\u003eNUMBER OF COATS: 2-3\u003c\/p\u003e\u003cp\u003eDRY FILM THICKNESS PER COAT: 2 mils (5.4 wet mils)\u003c\/p\u003e\u003cp\u003eCOVERAGE: 400 sq. ft\/gal.\u003c\/p\u003e\u003cp\u003eAPPLICATION TEMP: 40°F Min. \/ 95°F Max.\u003c\/p\u003e\u003cp\u003eTHINNER: Water\u003c\/p\u003e\u003cp\u003eDRY TIMES:\u003c\/p\u003e\u003cp\u003eTemp\u003c\/p\u003e\u003cp\u003eTo Touch\u003c\/p\u003e\u003cp\u003eTo Recoat\u003c\/p\u003e\u003cp\u003eTo Launch\u003c\/p\u003e\u003cp\u003e95°F\u003c\/p\u003e\u003cp\u003e1\/2 HR\u003c\/p\u003e\u003cp\u003e2 HR\u003c\/p\u003e\u003cp\u003e6 HR\u003c\/p\u003e\u003cp\u003e73°F\u003c\/p\u003e\u003cp\u003e2 HR\u003c\/p\u003e\u003cp\u003e4 HR\u003c\/p\u003e\u003cp\u003e6 HR\u003c\/p\u003e\u003cp\u003e59°F\u003c\/p\u003e\u003cp\u003e2 HR\u003c\/p\u003e\u003cp\u003e5 HR\u003c\/p\u003e\u003cp\u003e8 HR\u003c\/p\u003e\u003cp\u003ePREVIOUSLY PAINTED SURFACES: In Good Condition Remove old flaking paint. Wet sand with 80 grade (grit) paper. Rinse with fresh water and allow to dry. In Poor Condition Remove antifouling paint in poor condition with Interstrip 299E.\u003c\/p\u003e\u003cp\u003eBARE FIBERGLASS: Scrub the surface thoroughly with soap and water using a stiff brush. Apply Fiberglass Surface Prep YMA601V with a 3\/8\"\" nap roller on surface to be de-waxed, work in 10x10 foot areas. Ensure YMA601V is removed before drying. Scrub Fiberglass Surface Prep YMA601V using a 3M Doodlebug™ and a brown Scotch-Brite® pad. Once all areas have been thoroughly scrubbed, use wet rags or spray down with high pressure rinse to remove all traces of Fiberglass Surface Prep YMA601V. Change rags frequently. Wipe down with clean cloths. Repeat the cleaning process until water no longer beads. Surface must be clean and dry prior to application of Fiberglass Bottomkote® Aqua.\u003c\/p\u003e\u003cp\u003eBARE FIBERGLASS - NO SAND: Prepare surface as described above. Apply the Fiberglass Bottomkote®  Aqua within 4 hours of cleaning. If this time is exceeded, rinse with fresh water and allow to dry. If exceeding 2 months between de-waxing and painting, repeat cleaning prior to application of Fiberglass Bottomkote® Aqua.\u003c\/p\u003e\u003cp\u003eBARE WOOD: Clean with Special Thinner 216. Sand with 80 grade (grit) paper. Clean with Special Thinner 216. Repair any defects with Watertite Epoxy Filler. Lightly sand and wipe clean. Surface must be free from all contamination. Fill seams, if necessary, with Seam Compound Brown 30. Apply first coat of Fiberglass Bottomkote® Aqua thinned with clean water (do not add more than 10% by volume).\u003c\/p\u003e\u003cp\u003eUNDERWATER METALS: All substrates must be primed, clean and dry. All preparation for bare substrates is covered on the appropriate primer labels. Contact Interlux® for further details.\u003c\/p\u003e\u003cp\u003eDO NOT USE THIS PRODUCT ON ALUMINUM HULLS AND OUTDRIVES.\u003c\/p\u003e\u003cp\u003eAPPLICATION INFO…\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"5351009","offer_id":50581711126786,"sku":"ILX-YBA569G","price":268.29,"currency_code":"USD","in_stock":true},{"title":"Gallon","offer_id":50581711159554,"sku":"ILX-YBA579G","price":268.29,"currency_code":"USD","in_stock":true},{"title":"Quart","offer_id":50581711192322,"sku":"ILX-YBA579Q","price":97.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/interlux_fiberglass_bottomkote_aqua__19497.1753840700_c4da81e3-a826-4dd3-8683-b5aea4f8bce8.webp?v=1791078386"},{"product_id":"interlux-pacifica-plus-antifouling-marine-paint","title":"Interlux Paint Pacifica Plus Antifouling Marine Paint","description":"\u003cp\u003eInterlux Pacifica Plus Antifouling Marine Paint with Biolux\u003c\/p\u003e\u003cp\u003eInterlux Pacifica antifouling paint is specially designed to battle slime and contains Econea to help ward off barnacles, algae, and other underwater organisms. It is formulated with a dual biocide antifouling that uses Biolux Slime Blocking technology.\u003c\/p\u003e\u003cp\u003eInterlux Pacifica is easy to apply with a roller or brush. The overall performance and protection provided by Interlux Pacifica are directly related to the amount of antifouling paint applied. A thin layer may lead to premature fouling. A thicker layer will protect your boat much longer.  Interlux Pacifica is safe to use for both fresh and saltwater applications and is safe for all boats including aluminum, wood, fiberglass, and steel.\u003c\/p\u003e\u003cp\u003eInterlux Pacifica uses Econea technology, which is a copper-replacement technology. It allows antifouling performance to work at very low concentrations.  It is safer for use on aluminum, unlike its Copper Oxide counterparts. Once emitted from paint film, it breaks down quickly. It is formulated to protect against more severe organisms.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eCopper-free bottom paint\u003c\/p\u003e\u003cp\u003eContains Econea™ to control shell growth and Biolux® Slime-Blocking technology\u003c\/p\u003e\u003cp\u003eClean, crisp, bright colors\u003c\/p\u003e\u003cp\u003eHigh solids, reduced solvent emissions\u003c\/p\u003e\u003cp\u003eFast dry, low odor\u003c\/p\u003e\u003cp\u003ePolishing action for improved fuel efficiencies, which equals reduced Carbon Dioxide and Sulfur Dioxide into the air\u003c\/p\u003e\u003cp\u003eSuitable for all substrates, including aluminum\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eFinish: Low Sheen\u003c\/p\u003e\u003cp\u003eApplication Area: Below the waterline\u003c\/p\u003e\u003cp\u003eNumber of Coats: 2-3\u003c\/p\u003e\u003cp\u003eVOC: 330 g\/lt\u003c\/p\u003e\u003cp\u003eUnit Size: 1 US Gallon\u003c\/p\u003e\u003cp\u003eColors Available: YBB260-Blue, YBB262-Red, YBB263-Black\u003c\/p\u003e\u003cp\u003eAssociated Products:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInterlux Special Thinner: For thinning - do not exceed 10% per volume\u003c\/li\u003e\n\u003cli\u003e***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eHow To Apply Interlux Pacifica Plus\u003c\/p\u003e\u003cp\u003eInterlux Pacifica Plus is suitable for use on all boats including fiberglass, aluminum, wood, and steel. This antifouling paint can be applied by airless spray, brush, conventional spray, or roller. Only apply Pacifica Plus to clean, dry, and properly prepared surfaces only. All metal surfaces must be primed before applying Pacifica Plus.\u003c\/p\u003e\u003cp\u003eApplication Method: Airless Spray, Brush, Conventional Spray, Roller\u003c\/p\u003e\u003cp\u003eNumber of Coats: 2\u003c\/p\u003e\u003cp\u003eDry Film Thickness per Coat: 2 mils (3 mils wet)\u003c\/p\u003e\u003cp\u003eCoverage: 528 sq. ft\/gal.\u003c\/p\u003e\u003cp\u003eApplication Temp: 41°F Min. \/ 95°F Max.\u003c\/p\u003e\u003cp\u003eThinner: Special Thinner 216\u003c\/p\u003e\u003cp\u003eDRY TIMES:\u003c\/p\u003e\u003cp\u003eTemp\u003c\/p\u003e\u003cp\u003eTo Touch\u003c\/p\u003e\u003cp\u003eTo Recoat\u003c\/p\u003e\u003cp\u003eTo Launch\u003c\/p\u003e\u003cp\u003e95°F\u003c\/p\u003e\u003cp\u003e1 HR\u003c\/p\u003e\u003cp\u003e2 HR\u003c\/p\u003e\u003cp\u003e4 HR\u003c\/p\u003e\u003cp\u003e73°F\u003c\/p\u003e\u003cp\u003e2 HR\u003c\/p\u003e\u003cp\u003e4 HR\u003c\/p\u003e\u003cp\u003e6 HR\u003c\/p\u003e\u003cp\u003e50°F\u003c\/p\u003e\u003cp\u003e3 HR\u003c\/p\u003e\u003cp\u003e6 HR\u003c\/p\u003e\u003cp\u003e9 HR\u003c\/p\u003e\u003cp\u003ePREVIOUSLY PAINTED SURFACES:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eIn Good Condition with Pacifica or Trilux 33\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eSand with 80 (grit) grade paper. Wipe with Special Thinner 216.\u003c\/p\u003e\u003cp\u003eIf these coatings are more than a year old, wet sand the surface with 80 (grit) grade paper to a clean, firmly attached surface. Wipe down with Special Thinner 216.\u003c\/p\u003e\u003cp\u003eApply 1-2 coats of TBT Sealer.\u003c\/p\u003e\u003cp\u003eNon-TBT Copolymers: Apply 1 coat of Primocon.\u003c\/p\u003e\u003cp\u003eHard Antifoulings: Sand surface with 80 grade (grit) paper to a clean firmly attached surface, wipe with Special Thinner 216.\u003c\/p\u003e\u003cp\u003eApply Pacifica Plus.\u003c\/p\u003e\u003cp\u003eIn Poor Condition\u003c\/p\u003e\u003cp\u003eRemove antifouling paint in poor condition with Interstrip Semi-Paste 299E.\u003c\/p\u003e\u003cp\u003eSand and wipe clean with Fiberglass Solvent Wash 202.\u003c\/p\u003e\u003cp\u003eBARE FIBERGLASS:\u003c\/p\u003e\u003cp\u003eBegin by scrubbing the surface thoroughly with a stiff brush using soap and water to remove loose dirt and contamination. Flush with fresh water to remove the soap residue.\u003c\/p\u003e\u003cp\u003eRemove mold release wax using one of the following methods:\u003c\/p\u003e\u003cp\u003eApply Fiberglass Surface Prep YMA601 or Low VOC Fiberglass Solvent Wash 202V with a maroon, 3M Scotch-Brite®  pad and scrub well.\u003c\/p\u003e\u003cp\u003eFlush with fresh water or wipe off with a clean, wet cloth ensuring that no traces of Fiberglass Surface Prep or Low VOC Fiberglass Solvent Wash remain.\u003c\/p\u003e\u003cp\u003eAn alternate method would be to dampen cheesecloth with Fiberglass S…\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"Black","offer_id":50581711290626,"sku":"ILX-YBB-263G","price":356.99,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":50581711323394,"sku":"ILX-YBB-260G","price":356.99,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":50581711356162,"sku":"ILX-YBB-262G","price":356.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/426806_source_1751900639.jpg?v=1791078387"},{"product_id":"interlux-fiberglass-bottomkote-nt","title":"Interlux Paint Fiberglass Bottomkote NT","description":"\u003cp\u003eInterlux Fiberglass Bottomkote NT Antifouling Bottom Paint\u003c\/p\u003e\u003cp\u003eInterlux Fiberglass Bottomkote NT is a hybrid hard\/ablative antifouling bottom paint that gives you the best of both worlds. Its dual-resin formula combines the durability of a hard coating with the self-polishing benefits of an ablative paint, so the film gradually smooths with use instead of building up heavy layers year after year. The result is a cleaner, more efficient hull and easier maintenance at haul-out.\u003c\/p\u003e\u003cp\u003eDesigned for both powerboats and sailboats, Bottomkote NT is an excellent choice for boats kept in fresh, salt, or brackish water. It delivers reliable, single-season fouling protection on fiberglass, wood, and properly primed metals hulls (not for aluminum) and can be burnished or scrubbed where extra smoothness is desired.\u003c\/p\u003e\u003cp\u003eAvailable in red, green, blue, and black, it provides a classic antifouling look with modern hybrid performance.\u003c\/p\u003e\u003cp\u003eBest Uses\u003c\/p\u003e\u003cp\u003eFiberglass powerboats and sailboats that are used regularly during the season\u003c\/p\u003e\u003cp\u003eBoats kept in marinas or on a mooring in fresh, salt, and brackish water\u003c\/p\u003e\u003cp\u003eOwners who want durable, scrubbable finish without excessive bottom paint build-up\u003c\/p\u003e\u003cp\u003eDIYers looking for a fast-dry system that allows multiple coats and same-day launch in suitable conditions.\u003c\/p\u003e\u003cp\u003eKey features \u0026amp; benefits\u003c\/p\u003e\u003cp\u003eHybrid hard\/ablative technology - Combines hard-coat durability with a controlled polishing action to help prevent premature wear-through while still shedding light growth.\u003c\/p\u003e\u003cp\u003eSmooth, efficient finish - As the surface slowly smooths with use, it helps reduce drag for better speed and fuel efficiency.\u003c\/p\u003e\u003cp\u003eFast-dry formula - Under normal conditions you can apply multiple coats and launch the same day, making it ideal for tight haul-out schedules.\u003c\/p\u003e\u003cp\u003eVersatile application - Suitable for fiberglass, wood, and properly primed steel or lead underwater areas (not for aluminum hulls or outdrives).\u003c\/p\u003e\u003cp\u003eUniversal use - Works for most power and sailboats in fresh, salt, and brackish waters, making it a flexible choice for mixed cruising areas.\u003c\/p\u003e\u003cp\u003eHow to apply Interlux Fiberglass Bottomkote NT\u003c\/p\u003e\u003cp\u003eInterlux Fiberglass Bottomkote NT can be applied with a brush, roller, or spray equipment over most existing antifouling paints that are in good, sound condition. Always make sure the old coating is firmly adhered, clean, and free of loose or flaking material before overcoating.\u003c\/p\u003e\u003cp\u003eSubstrates: Fiberglass, wood, and properly primed steel\/lead underwater surfaces\u003c\/p\u003e\u003cp\u003eExisting bottom paint: Check the Interlux antifouling compatibility chart to confirm suitability, then clean and sand as required\u003c\/p\u003e\u003cp\u003eCoats: Apply at least two full coats; use an extra coat on bare wood or high-wear areas such as leading edges and the waterline\u003c\/p\u003e\u003cp\u003eThinning: Thin only if necessary, using the appropriate Interlux thinner, and do note exceed label recommendations\u003c\/p\u003e\u003cp\u003eFor best results, always stir or shake the paint thoroughly before and during use to keep the copper and resins evenly mixed.\u003c\/p\u003e\u003cp\u003eSurface preparation overview\u003c\/p\u003e\u003cp\u003eProper prep is critical to long-term performance. Follow the detailed instructions on the product label and technical datasheet, but in general:\u003c\/p\u003e\u003cp\u003ePreviously painted surfaced - good condition\u003c\/p\u003e\u003cp\u003eWash to remove slime, salts, and contaminants.\u003c\/p\u003e\u003cp\u003eLightly sand if recommended to provide a clean, dull surface.\u003c\/p\u003e\u003cp\u003eRemoves sanding residue and apply the recommended coats of Fiberglass Bottomkote NT\u003c\/p\u003e\u003cp\u003ePreviously Painted Surfaces - poor condition\u003c\/p\u003e\u003cp\u003eStrip loose, flaking, or heavily built-up antifouling using appropriate methods (chemical stripper for fiberglass\/wood or sandblasting for steel).\u003c\/p\u003e\u003cp\u003eOnce the substrate is clean and sound, follow the bare fiberglass, bare wood, or primed metal system as directed.\u003c\/p\u003e\u003cp\u003eBare Fiberglass\u003c\/p\u003e\u003cp\u003eRemove mold release wax and contaminants with the recommended Interlux fiberglass prep products.\u003c\/p\u003e\u003cp\u003eFair any imperfections as needed.\u003c\/p\u003e\u003cp\u003eFollow either the no-sand or sanding system detailed in the Interlux datasheet, typically involving a suitable primer or barrier coat followed b…\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"5608670","offer_id":50581711487234,"sku":"ILX-YBB-349Q","price":66.09,"currency_code":"USD","in_stock":true},{"title":"5608671","offer_id":50581711520002,"sku":"ILX-YBB-359G","price":183.59,"currency_code":"USD","in_stock":true},{"title":"5608673","offer_id":50581711552770,"sku":"ILX-YBB-369G","price":183.59,"currency_code":"USD","in_stock":true},{"title":"5608676","offer_id":50581711585538,"sku":"ILX-YBB-379G","price":183.59,"currency_code":"USD","in_stock":true},{"title":"5608678","offer_id":50581711618306,"sku":"ILX-YBB-379Q","price":66.09,"currency_code":"USD","in_stock":true},{"title":"Gallon","offer_id":50581711651074,"sku":"ILX-YBB-349G","price":183.59,"currency_code":"USD","in_stock":false},{"title":"Quart","offer_id":50581711683842,"sku":"ILX-YBB-369Q","price":66.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/interlux_fiberglass_bottomkote_NT_photo__36037.1770299701.webp?v=1791078389"},{"product_id":"interlux-micron-extra-spc-antifouling-paint","title":"Interlux Paint Micron Extra SPC Antifouling Paint","description":"\u003cp\u003eInterlux Micron Extra SPC Antifouling Paint\u003c\/p\u003e\u003cp\u003eInterlux is known for its high-quality antifouling paints that have been manufactured using only superior ingredients and developed for long-lasting results in all types of waters. Interlux Micron Extra Self Polishing Copolymer (SPC) antifouling paint is designed to provide premium multi-seasonal performance in every climate, from frigid to tropical. The paint’s SPC technology provides remarkable protection by slowly polishing away its laminated surface, whether docked or out on the water, to provide a smoother, more efficient hull while minimizing paint build up.\u003c\/p\u003e\u003cp\u003eInterlux Micron Extra SPC is suitable for all types of boats. It can be applied to fiberglass, wood, and previously antifouled surfaces, but is not recommended for aluminum boat bottoms. It is available in five popular colors. Two coats are recommended for complete coverage. When applied, Interlux Micron Extra SPC antifouling paint will dry with a matte finish.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eFor use on fiberglass, wood, and previously painted surfaces. NOTE: Do not use on aluminum.\u003c\/p\u003e\u003cp\u003eAntifouling paint offers multi-season protection 24\/7\/365\u003c\/p\u003e\u003cp\u003eMicron Extra SPC can be launched and relaunched without repainting\u003c\/p\u003e\u003cp\u003eThe Self Polishing Copolymer works at a constant rate for a smoother hull finish that offers greater efficiency\u003c\/p\u003e\u003cp\u003eIdeal for use in Brackish, Fresh, and Saltwater in both cold and tropical climates\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eFinish: Matte\u003c\/p\u003e\u003cp\u003eNumber of Coats: 2 Coats minimum\u003c\/p\u003e\u003cp\u003eSizing: 1 US Gallon, 1 US Quart\u003c\/p\u003e\u003cp\u003eTheoretical Coverage: Brush\/Roller: 414ft2\/gal | Spray: 276ft2\/gal\u003c\/p\u003e\u003cp\u003eColors Available:450 Red, 451 Blue, 452 Black, 453 Dark Blue, 454 Green\u003c\/p\u003e\u003cp\u003eVOC: 328 g\/lt average\u003c\/p\u003e\u003cp\u003eAssociated Products:\u003c\/p\u003e\u003cp\u003eSpecial thinner 216 - For wiping down previously painted surfaces and thinning\u003c\/p\u003e\u003cp\u003eFiberglass Solvent Wash 202 - To clean bare fiberglass prior to application\u003c\/p\u003e\u003cp\u003eInterprotect - Epoxy barrier for blister protection, prevention, and priming\u003c\/p\u003e\u003cp\u003eTemperature F° (C°)*\u003c\/p\u003e\u003cp\u003eTouch Dry\u003c\/p\u003e\u003cp\u003eOvercoating\u003c\/p\u003e\u003cp\u003eImmersion Time Minimum\u003c\/p\u003e\u003cp\u003e41°F (5° C)\u003c\/p\u003e\u003cp\u003e1 Hour\u003c\/p\u003e\u003cp\u003e16 Hours\u003c\/p\u003e\u003cp\u003e24 Hours\u003c\/p\u003e\u003cp\u003e59°F (15° C)\u003c\/p\u003e\u003cp\u003e45 Minutes\u003c\/p\u003e\u003cp\u003e10 Hours\u003c\/p\u003e\u003cp\u003e18 Hours\u003c\/p\u003e\u003cp\u003e73°F (23° C)\u003c\/p\u003e\u003cp\u003e30 Minutes\u003c\/p\u003e\u003cp\u003e6 Hours\u003c\/p\u003e\u003cp\u003e12 Hours\u003c\/p\u003e\u003cp\u003e95­°F (35° C)\u003c\/p\u003e\u003cp\u003e20 Minutes\u003c\/p\u003e\u003cp\u003e4 Hours\u003c\/p\u003e\u003cp\u003e8 Hours\u003c\/p\u003e\u003cp\u003e*If air temperature falls below 41°F (5°C) during the dry time prior to immersion, extend the dry times 12 hours minimum\u003c\/p\u003e\u003cp\u003eHow to Apply Interlux Micron Extra SPC Ablative Antifouling Pain\u003c\/p\u003e\u003cp\u003eApplication Methods: Air atomized, Brush, Roller\u003c\/p\u003e\u003cp\u003eRecommended DFT per coat\u003c\/p\u003e\u003cp\u003eBrush\/Roller: 2.4mils dry per coat\u003c\/p\u003e\u003cp\u003eSpray: 3.6 mils dry per coat\u003c\/p\u003e\u003cp\u003eRecommended WFT per coat\u003c\/p\u003e\u003cp\u003eBrush\/Roller: 3.9 mils wet per coat\u003c\/p\u003e\u003cp\u003eSpray: 5.8 mils wet per coat\u003c\/p\u003e\u003cp\u003eMinimum Ambient Temperature: 41°F (5° C)\u003c\/p\u003e\u003cp\u003eMaximum Ambient temperature: 95°F (35°C)\u003c\/p\u003e\u003cp\u003eSurface Preparation\u003c\/p\u003e\u003cp\u003ePreviously Antifouled Surfaces:\u003c\/p\u003e\u003cp\u003eIn Good condition: Remove loose paint by sanding with 80 grit paper. Remove sanding residue\u003c\/p\u003e\u003cp\u003eIn Poor condition: Remove old antifouling paint completely before refinishing\u003c\/p\u003e\u003cp\u003eBare Fiberglass\u003c\/p\u003e\u003cp\u003eIt is very important that bare fiberglass is properly prepared to prevent delamination of the antifouling paint. Begin by scrubbing the surface thoroughly with a stiff brush using soap and water to remove loose dirt and contamination.\u003c\/p\u003e\u003cp\u003eFlush with fresh water to remove the soap residue and allow it to dry.\u003c\/p\u003e\u003cp\u003eRemove mold release wax using one of the following Interlux products: Fiberglass Surface Prep or Fiberglass Solvent Wash 202.\u003c\/p\u003e\u003cp\u003eAfter the surface has been properly cleaned, follow one of the application systems below.\u003c\/p\u003e\u003cp\u003eFiberglass No Sand System\u003c\/p\u003e\u003cp\u003eClean the surface following the preparation procedure above.\u003c\/p\u003e\u003cp\u003eApply one coat of InterProtect 2000E or Fiberglass No-Sand Primer following the label instructions for applying the primer and overcoating with antifouling paint.\u003c\/p\u003e\u003cp\u003eFiberglass Sanding System\u003c\/p\u003e\u003cp\u003eClean the surface following the preparation procedure above.\u003c\/p\u003e\u003cp\u003eSand the entire surface well with 80 grade paper until flat matte fin…\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"5677753","offer_id":50581711945986,"sku":"ILX-YBC452Q","price":198.99,"currency_code":"USD","in_stock":true},{"title":"5677754","offer_id":50581711978754,"sku":"ILX-YBC454G","price":496.79,"currency_code":"USD","in_stock":true},{"title":"5677755","offer_id":50581712011522,"sku":"ILX-YBC453G","price":506.99,"currency_code":"USD","in_stock":false},{"title":"5677758","offer_id":50581712044290,"sku":"ILX-YBC452G","price":496.79,"currency_code":"USD","in_stock":true},{"title":"Gallon","offer_id":50581712077058,"sku":"ILX-YBC450G","price":506.99,"currency_code":"USD","in_stock":false},{"title":"Quart","offer_id":50581712109826,"sku":"ILX-YBC451Q","price":202.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/887538_source_1751980366.jpg?v=1791078390"},{"product_id":"interlux-micron-cf-bottom-paint","title":"Interlux Paint Micron CF Bottom Paint","description":"\u003cp\u003eInterlux Micron CF Bottom Paint\u003c\/p\u003e\u003cp\u003eAntifouling Copper-Free Paint with Econea\u003c\/p\u003e\u003cp\u003eMicron® CF features all the fantastic benefits of Micron technology-without copper. Micron CF is your multi season antifouling solution with its Biolux® Slime Blocking Technology to combat slime and Econea™ to ward off barnacles and zebra mussels. Micron CF features self polishing that reduces paint build- up and the self-smoothing paint reduces friction and improves fuel efficiency. Micron CF is available in 4 bright colors including Shell White as well as a crisp black. A high solids formulation, Micron CF offers reduced solvent emissions and is VOC compliant. Safe on all hull materials.\u003c\/p\u003e\u003cp\u003eFEATURES:\u003c\/p\u003e\u003cp\u003eNo sanding or prep work required.\u003c\/p\u003e\u003cp\u003eCopper free formula\u003c\/p\u003e\u003cp\u003eHaul \u0026amp; Relaunch without repainting\u003c\/p\u003e\u003cp\u003eReduced solvent emissions\u003c\/p\u003e\u003cp\u003eTouch dry – 1 hour; Dry to overcoat – 2 hours; Dry to launch – 6 hours minimum\u003c\/p\u003e\u003cp\u003eVOC compliant\u003c\/p\u003e\u003cul\u003e\u003cli\u003eWhy Micron technology? Micron Technology is the basis of all Micron bottom paints and the formulations are second to none. Micron Technology was first introduced to the industry in the early 80's and has evolved into the class leading antifouling paints. - Longest lasting, multi-season ability to haul and re-launch without repainting - Controlled polishing like a bar of soap reduces paint build up, eliminating the need for sanding - Micron Technology polishes to a smoother surface than hard antifoulings - maximizing fuel savings - Unlike old fashion high copper bottom paints, Micron uses less copper more efficiently for longest lasting antifouling protection Micron Technology vs old fashioned hard antifoulingsAfter many years of using old fashioned hard high copper bottom paints, the paint film continues to build up, become brittle, and starts to crack and flake off. Micron Technology antifoulings polish at a controlled rate and therefore will never build up. It is this controlled polishing that enables Micron to be used on all boats, in all waters, and at all times! No paint build up means that you will never have to remove old layers of Micron and spend precious hours or money each time you want to repaint. Micron Technology and fuel savingsThere's another added benefit to controlled polishing: fuel savings! The roughness caused by old fashioned hard high copper bottom paints creates extra drag on boat bottoms requiring the use of more horsepower. With extra horsepower comes extra fuel consumption, extra fuel consumption means more money at the fuel pump. There is only one way to ensure that the bottom is smooth and that is to choose Micron Technology. Micron Technology antifouling polishes at a controlled rate leaving your bottom smooth - remember the smoother the bottom paint, the lower the resistance; the lower the surface resistance the better the fuel economy. ------------------------------------------------------------------------------------------------\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eHow To Apply Micron CF\u003c\/p\u003e\u003cp\u003eAPPLICATION DATA METHOD: Airless Spray, Brush, Conventional Spray, Roller  DO NOT SPRAY without following proper safety procedures for spray application.\u003c\/p\u003e\u003cp\u003eNUMBER OF COATS: 2\u003c\/p\u003e\u003cp\u003eDRY FILM THICKNESS PER COAT: 2 mils (3 wet mils)\u003c\/p\u003e\u003cp\u003eCOVERAGE: 518 sq. ft\/gal.\u003c\/p\u003e\u003cp\u003eAPPLICATION TEMP: 41°F Min. \/ 95°F Max.\u003c\/p\u003e\u003cp\u003eTHINNER: Special Thinner 216\u003c\/p\u003e\u003cp\u003eDRY TIMES:\u003c\/p\u003e\u003cp\u003eTemp\u003c\/p\u003e\u003cp\u003eTo Touch\u003c\/p\u003e\u003cp\u003eTo Recoat\u003c\/p\u003e\u003cp\u003eTo Launch\u003c\/p\u003e\u003cp\u003e95°F\u003c\/p\u003e\u003cp\u003e1 HR\u003c\/p\u003e\u003cp\u003e2 HR\u003c\/p\u003e\u003cp\u003e4 HR\u003c\/p\u003e\u003cp\u003e73°F\u003c\/p\u003e\u003cp\u003e2 HR\u003c\/p\u003e\u003cp\u003e4 HR\u003c\/p\u003e\u003cp\u003e6 HR\u003c\/p\u003e\u003cp\u003e50°F\u003c\/p\u003e\u003cp\u003e3 HR\u003c\/p\u003e\u003cp\u003e6 HR\u003c\/p\u003e\u003cp\u003e9 HR\u003c\/p\u003e\u003cp\u003ePREVIOUSLY PAINTED SURFACES: In Good Condition with Pacifica or Trilux 33: Sand with 80 grade (grit) paper. Remove sanding residue. TBT Copolymers: If these coatings are more than a year old, wet sand the surface with 80 (grit) grade paper to a clean, firmly attached surface. Remove sanding residue. Apply 1-2 coats of TBT Sealer. Sand surface with 80 grade (grit) paper to a clean firmly attached surface. Remove sanding residue. Non-TBT Copolymers: Apply 1 coat of Primocon. Har…\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"Black","offer_id":50581712240898,"sku":"ILX-YBD103G","price":468.09,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":50581712273666,"sku":"ILX-YBD100G","price":468.09,"currency_code":"USD","in_stock":true},{"title":"Green","offer_id":50581712306434,"sku":"ILX-YBD101G","price":468.09,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":50581712339202,"sku":"ILX-YBD102G","price":468.09,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":50581712371970,"sku":"ILX-YBD104G","price":468.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/426775_source_1751902074_29ad7213-48fe-4fc1-8c4e-2e8f64b7a819.jpg?v=1791078392"},{"product_id":"interlux-micron-navigator-w-biolux-antifouling-bottom-paint","title":"Interlux Paint Micron Navigator w\/Biolux Antifouling Bottom Paint","description":"\u003cp\u003eInterlux Micron Navigator w\/Biolux Antifouling Water Based Bottom Paint\u003c\/p\u003e\u003cp\u003eInterlux Micron Navigator is a copper free antifouling paint with a water based formula. The Micron antifouling formula offers multi-season long lasting polishing protection. Dual utilization of Biolux and Econea boosts anitfouling performance in any conditions and salt water, fresh water, and brackish water. The fast drying formula has been engineered for application in  temperatures as low as 41° F. Micron Navigator is easily applied over most antifouling paints and can be sed on any substrate including primed underwater metals.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eWater based Copper Free formula\u003c\/p\u003e\u003cp\u003eUse on Fiberglass, Wood, Aluminum\u003c\/p\u003e\u003cp\u003eMulti-Season\u003c\/p\u003e\u003cp\u003eFast Dry Tech\u003c\/p\u003e\u003cp\u003eLow Temperature application\u003c\/p\u003e\u003cp\u003ePolishing Protection\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003ePack Size: US Gallon or Quart\u003c\/p\u003e\u003cp\u003eRecommended usage: All fouling waters\u003c\/p\u003e\u003cp\u003eColors Available: Black (YBD779), Blue (YBD769), Green (YBD759), Red (YBD749), White (YBD704)\u003c\/p\u003e\u003cp\u003eDrying time: 30 minutes Touch Dry; 2 hours Overcoat; 6 hours immersion @ 77°F\u003c\/p\u003e\u003cp\u003eNumber of Coats: 2 coats for multi-season performance when the recommended DFT is applied\u003c\/p\u003e\u003cp\u003eRecommended DFT per coat: 1.5 mils dry per coat\u003c\/p\u003e\u003cp\u003eRecommended WFT per coat: 4 mils wet per coat\u003c\/p\u003e\u003cp\u003eCoverage: 408 ft²\/gal - Brush\/Roller\u003c\/p\u003e\u003cp\u003eVOC: 8.89 g\/lt (average)\u003c\/p\u003e\u003cp\u003eHow to Apply Interlux Micron Navigator w\/Biolux Antifouling Bottom Paint\u003c\/p\u003e\u003cp\u003eApplication Tips\u003c\/p\u003e\u003cp\u003eMixing: Shake or Stir throughly before use. Use a wooden or plastic stirring stick. Leave to stand for 10 minutes after stirring for air bubbles to disperse.\u003c\/p\u003e\u003cp\u003eThinner: thinning NOT recommended unless for Bare Wood (see preparation section)\u003c\/p\u003e\u003cp\u003eOther: Antifouling coatings should only be vacuum sanded or wet sanded. Never burn off old antifouling coatings. True color will develop after immersion. To prevent premature failure, ensure correct amount of paint is applied using the coverage as a guide.\u003c\/p\u003e\u003cp\u003eApplication Methods: Brush, Roller\u003c\/p\u003e\u003cp\u003eSurface Preparation:\u003c\/p\u003e\u003cp\u003eGood Condition:\u003c\/p\u003e\u003cp\u003eRemove all traces of loose paint and contamination by sanding\u003c\/p\u003e\u003cp\u003eSand the entire surface well with 80 grit sandpaper.\u003c\/p\u003e\u003cp\u003eRemove sanding residue\u003c\/p\u003e\u003cp\u003ePoor Condition:\u003c\/p\u003e\u003cp\u003eCompletely remove all old antifouling paint with paint stripper and proceed\u003c\/p\u003e\u003cp\u003eProceed with the application system for bare work as described below\u003c\/p\u003e\u003cp\u003eBare Fiberglass (Polyester or Vinylester) Epoxy\u003c\/p\u003e\u003cp\u003eScrub the surface with soap and water using a stiff brush\u003c\/p\u003e\u003cp\u003eApply Fiberglass Surface Prep YMA601V with a 3\/8\" nap roller\u003c\/p\u003e\u003cp\u003eDewax the surface working in 10x10 foot areas. Ensure the YMA601V is removed before drying. Scrub the Surface Prep with a 3M Doodlebug or brown Scotch-Brite pad.\u003c\/p\u003e\u003cp\u003eOnce all areas have been scrubbed use wet rags or high pressure rinse to remove all traces of the Fiberglass Surface Prep. *change rags frequently*\u003c\/p\u003e\u003cp\u003eWipe down with clean cloths, repeating the process until water no longer beads.\u003c\/p\u003e\u003cp\u003eThe surface must be clean and dry prior to application\u003c\/p\u003e\u003cp\u003eApplication:\u003c\/p\u003e\u003cul\u003e\u003cli\u003e*Refer to the surface preparation instructions above before application*\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eBare Fiberglass - Simple No Sand System\u003c\/p\u003e\u003cp\u003eFollow the above Surface Preparation instructions\u003c\/p\u003e\u003cp\u003eApply the Micron Navigator within 4 hours of cleaning\u003c\/p\u003e\u003cp\u003eIf this time is exceeded rinse with fresh water and allow to dry\u003c\/p\u003e\u003cp\u003eIf exceeding 2 months between de-waxing and painting, repeat cleaning instructions\u003c\/p\u003e\u003cp\u003eBare Fiberglass - Blister Prevention System\u003c\/p\u003e\u003cp\u003eFollow the above Surface Preparation instructions\u003c\/p\u003e\u003cp\u003eSand with 80 grade (grit) paper\u003c\/p\u003e\u003cp\u003eRemove sanding residue\u003c\/p\u003e\u003cp\u003eApply Interprotect 2000E to a thickness of 10 mils\u003c\/p\u003e\u003cp\u003eBarewood:\u003c\/p\u003e\u003cp\u003eSand with 80 grade (grit) paper\u003c\/p\u003e\u003cp\u003eRemove sanding residue\u003c\/p\u003e\u003cp\u003eApply the first coat of Micron Navigator thinned 10% with water\u003c\/p\u003e\u003cp\u003eFill seams, if necessary, with Seam Comppound Brown 30\u003c\/p\u003e\u003cp\u003eApply 2 more coats of Micron Navigator unreduced\u003c\/p\u003e\u003cp\u003eAluminum\/Underwater Metals:\u003c\/p\u003e\u003cp\u003eGritblast or sand with medium grade (grit) emery cloth to a bright metal finish and wipe clean\u003c\/p\u003e\u003cp\u003eApply one coat of Interprotect 2000E that has been thinned 15-20% with reducing solvent 2316N\u003c\/p\u003e\u003cp\u003eApply the int…\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"5608706","offer_id":50581712535810,"sku":"ILX-YBD779Q","price":152.99,"currency_code":"USD","in_stock":false},{"title":"Quart","offer_id":50581712568578,"sku":"ILX-YBD704Q","price":152.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/Interlux_Micron_Navigator_photo__40770.1753840763_ef28bd0e-4041-4a16-b7e6-ba68d82dd5cd.webp?v=1791078393"},{"product_id":"interlux-aqua-one-ablative-antifouling-paint","title":"Interlux Paint Aqua One Ablative Antifouling Paint","description":"\u003cp\u003eInterlux Aqua One Ablative Antifouling Paint\u003c\/p\u003e\u003cp\u003eInterlux is a leading manufacturer of antifouling paint and has been protecting boats with their complete line of protective paints for over a century. Their name is synonymous with unmatched quality and protection.\u003c\/p\u003e\u003cp\u003eInterlux Aqua One is a cost-effective ablative antifouling paint and is known for its self-polishing attributes. It can easily be applied with a roller or brush. Aqua One is manufactured with the latest technology in ablative paints to provide comprehensive coverage in all water types. It is designed to limit build-up to avoid sanding between applications.\u003c\/p\u003e\u003cp\u003eInterlux Aqua One Ablative Antifouling Paint is a water-based paint that is environmentally safe. It contains a low VOC which produces less odor, making it safe to use indoors and improves drying time. Application is suggested for below the waterline. Interlux Aqua One is not suitable for Aluminum\/alloy or zinc spray materials. Applying over soft antifouling paints is not recommended. It is safe to use on GRP, wood, steel, iron, lead, and over most soft antifouling paints.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eExcellent Protection: The latest in enhanced technology that combines powerful antifouling performance with outstanding protection in all waters.\u003c\/p\u003e\u003cp\u003eEasy to Apply: Easy to use with brush or roller, indoors or outdoors, and has low odor and VOC emissions. Fast drying times for year-around use and launch. Ablative action wears away with use, minimizing build up and avoiding heavy sanding between applications.\u003c\/p\u003e\u003cp\u003eEnvironmentally Responsible: The solution for boat owners looking for protection, performance and fuel efficiency.\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eArea: Below the waterline\u003c\/p\u003e\u003cp\u003eFinish\/Sheen: Matte\u003c\/p\u003e\u003cp\u003eSuitable for Aluminum: No\u003c\/p\u003e\u003cp\u003eCoverage: 375 sq. ft\/gal\u003c\/p\u003e\u003cp\u003eVOC: 138 g\/l average\u003c\/p\u003e\u003cp\u003eApplication Method: Airless spray, Airmix, Brush, or Roller\u003c\/p\u003e\u003cp\u003eNumber of Coats: 2-3 by brush\/roller. Bare wood: 3 coats (first thinned).\u003c\/p\u003e\u003cp\u003eCoverage: 375 ft2\/gl\u003c\/p\u003e\u003cp\u003eRecommended DFT per Coat: 1.5\u003c\/p\u003e\u003cp\u003eRecommended WFT per Coat: 3.3\u003c\/p\u003e\u003cp\u003eThinner: Water. Thin no more than 10%\u003c\/p\u003e\u003cp\u003eHow to Apply Interlux Aqua One Ablative Antifouling Paint\u003c\/p\u003e\u003cp\u003eDrying\/Overcoating Times\u003c\/p\u003e\u003cp\u003eTouch Dry\u003c\/p\u003e\u003cp\u003eImmersion\u003c\/p\u003e\u003cp\u003eOvercoat by (min)\u003c\/p\u003e\u003cp\u003e41°F\u003c\/p\u003e\u003cp\u003e3 hours\u003c\/p\u003e\u003cp\u003e48 hours\u003c\/p\u003e\u003cp\u003e24 hours\u003c\/p\u003e\u003cp\u003e59°F\u003c\/p\u003e\u003cp\u003e1.5 hours\u003c\/p\u003e\u003cp\u003e8 hours\u003c\/p\u003e\u003cp\u003e5 hours\u003c\/p\u003e\u003cp\u003e73°F\u003c\/p\u003e\u003cp\u003e1.5 hours\u003c\/p\u003e\u003cp\u003e6 hours\u003c\/p\u003e\u003cp\u003e4 hours\u003c\/p\u003e\u003cp\u003e95°F\u003c\/p\u003e\u003cp\u003e30 minutes\u003c\/p\u003e\u003cp\u003e6 hours\u003c\/p\u003e\u003cp\u003e2 hours\u003c\/p\u003e\u003cp\u003eSurface Preparation\u003c\/p\u003e\u003cp\u003ePainted Surfaces in Good Condition\u003c\/p\u003e\u003cp\u003eRemove all traces of loose paint and contamination by sanding the entire surface with 80 grit sandpaper.\u003c\/p\u003e\u003cp\u003eRemove sanding residue.\u003c\/p\u003e\u003cp\u003ePainted Surfaces in Poor Condition\u003c\/p\u003e\u003cp\u003eCompletely remove all old antifouling paint using Interstrip 299E for fiberglass and wood.\u003c\/p\u003e\u003cp\u003eSandblast to near white metal for steel.\u003c\/p\u003e\u003cp\u003eBare Fiberglass\u003c\/p\u003e\u003cp\u003eRemove mold release wax using Fiberglass Surface Prep YMA601V.\u003c\/p\u003e\u003cp\u003eFill any surface imperfections with Interlux Watertite.\u003c\/p\u003e\u003cp\u003eFollow one of the application systems below.\u003c\/p\u003e\u003cp\u003eBare Fiberglass - No Sanding System\u003c\/p\u003e\u003cp\u003eClean the surface using the preparation procedure above.\u003c\/p\u003e\u003cp\u003eApply one coat of Interlux Interprotect 2000E.\u003c\/p\u003e\u003cp\u003eFollowing overcoating guidelines for the primer, apply at least two coats of Interlux Aqua One allowing appropriate drying times.\u003c\/p\u003e\u003cp\u003eBare Fiberglass - Sanding System\u003c\/p\u003e\u003cp\u003eClean the surface using the preparation procedure above.\u003c\/p\u003e\u003cp\u003eSand with 80 grade paper then remove sanding residue.\u003c\/p\u003e\u003cp\u003eApply at least two coats of Interlux Aqua One allowing appropriate drying times.\u003c\/p\u003e\u003cp\u003eBare Fiberglass - Blister Prevention System\u003c\/p\u003e\u003cp\u003eClean the surface following the preparation procedure above.\u003c\/p\u003e\u003cp\u003eSand with 80 grade paper and remove sanding residue.\u003c\/p\u003e\u003cp\u003eApply Interprotect 2000E to a thickness of 10 mils.\u003c\/p\u003e\u003cp\u003eBare Wood\u003c\/p\u003e\u003cp\u003eSand with 80 grit paper then remove sanding residue.\u003c\/p\u003e\u003cp\u003eApply the first coat of Interlux Aqua One thinned by 10% with water.\u003c\/p\u003e\u003cp\u003eFill seams, if necessary, with Sea Compound Brown 30.\u003c\/p\u003e\u003cp\u003eApply 2 more coats of Aqua-One unreduced, allowing the appropriate dry times between coats.\u003c\/p\u003e\u003cp\u003eCan be applied over GRP, Wood, Steel\/…\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"5608709","offer_id":50581712699650,"sku":"ILX-YBE159G","price":196.99,"currency_code":"USD","in_stock":true},{"title":"5608710","offer_id":50581712732418,"sku":"ILX-YBE169G","price":196.99,"currency_code":"USD","in_stock":true},{"title":"5608713","offer_id":50581712765186,"sku":"ILX-YBE179G","price":196.99,"currency_code":"USD","in_stock":true},{"title":"5608715","offer_id":50581712797954,"sku":"ILX-YBE179Q","price":70.49,"currency_code":"USD","in_stock":true},{"title":"Gallon","offer_id":50581712830722,"sku":"ILX-YBE149G","price":196.99,"currency_code":"USD","in_stock":true},{"title":"Quart","offer_id":50581712863490,"sku":"ILX-YBE169Q","price":70.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/429215_source_1751894656_cd3085b3-40e0-4ccf-9d99-2005892ae118.jpg?v=1791078394"},{"product_id":"interlux-toplac-plus-marine-paint","title":"Interlux Paint Toplac Plus Marine Paint","description":"\u003cp\u003eInterlux Toplac Plus Marine Paint\u003c\/p\u003e\u003cp\u003eInterlux Toplac Plus delivers a hard, high-gloss polyurethane finish designed for topside applications above the waterline. This one-part marine paint features superior flow and leveling characteristics that produce smooth roller finishes without tipping. Apply it to hulls, decks, cabins, and trim using brush, roller, or spray methods. With coverage of 587 square feet per gallon, you'll need 2-3 coats for optimal protection. The formula works with single-part primers, enamels, and polyurethanes while offering excellent UV resistance. Available in bright, crisp colors that maintain their appearance in harsh marine environments.\u003c\/p\u003e\u003cp\u003eProduct Features:\u003c\/p\u003e\u003cp\u003eHard, high gloss, one-part polyurethane finish\u003c\/p\u003e\u003cp\u003eExcellent flow and leveling characteristics\u003c\/p\u003e\u003cp\u003eSmooth Roller Finish with no Tipping required\u003c\/p\u003e\u003cp\u003eTopside paint - Recommended for use above true waterline\u003c\/p\u003e\u003cp\u003eFor use with single-part primers, enamels, or polyurethanes\u003c\/p\u003e\u003cp\u003eAvailable in a range of bright, crisp colors\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eFinish: High Gloss\u003c\/p\u003e\u003cp\u003eApplication Method: Brush, roller or spray\u003c\/p\u003e\u003cp\u003eNumber of Coats: 2 Minimum (only 1 may be needed for touch-up\/repair)\u003c\/p\u003e\u003cp\u003eCoverage: 587 sq. ft\/gal per coat\u003c\/p\u003e\u003cp\u003eAssociated Products:\u003c\/p\u003e\u003cp\u003eThinner\/Cleaner\u003c\/p\u003e\u003cp\u003e2333N Reducing Solvent\u003c\/p\u003e\u003cp\u003e333 Brushing Thinner\u003c\/p\u003e\u003cp\u003e216 Special Thinner\u003c\/p\u003e\u003cp\u003eHow To Apply Toplac Plus\u003c\/p\u003e\u003cp\u003eApplication Method:  Brush, Roller, Spray\u003c\/p\u003e\u003cp\u003eNumber of Coats: 2-3\u003c\/p\u003e\u003cp\u003eDry Film Thickness per Coat: 1-1.5 mils (2-3 wet mils)\u003c\/p\u003e\u003cp\u003eCoverage: 587 sq. ft\/gal.\u003c\/p\u003e\u003cp\u003eApplication Temp: 41°F Min. \/ 95°F Max.\u003c\/p\u003e\u003cp\u003eThinning: Add 10% 2333N reducing solvent for brushes and 216 Special Thinner for spray\u003c\/p\u003e\u003cp\u003eCleaner: 333 Brushing Liquid\u003c\/p\u003e\u003cp\u003eDRY TIMES:\u003c\/p\u003e\u003cp\u003eTemp\u003c\/p\u003e\u003cp\u003eTouch Dry\u003c\/p\u003e\u003cp\u003eOvercoating Substrate\u003c\/p\u003e\u003cp\u003e95°F\u003c\/p\u003e\u003cp\u003e1 Hour\u003c\/p\u003e\u003cp\u003e6 Hour Min \/ 24 Hour Max\u003c\/p\u003e\u003cp\u003e77°F\u003c\/p\u003e\u003cp\u003e2 Hours\u003c\/p\u003e\u003cp\u003e8 Hour Min \/ 2 Day Max\u003c\/p\u003e\u003cp\u003e59°F\u003c\/p\u003e\u003cp\u003e3 Hours\u003c\/p\u003e\u003cp\u003e16 Hour Min \/ 3 Day Max\u003c\/p\u003e\u003cp\u003e41°F\u003c\/p\u003e\u003cp\u003e6 Hours\u003c\/p\u003e\u003cp\u003e24 Hour Min \/ 4 Day Max\u003c\/p\u003e\u003cp\u003eNote: Avoid applying late in the evening as condensation can cause a loss of gloss during overnight cure. Do not use in temperatures below 41° F\u003c\/p\u003e\u003cp\u003eSurface Preparation \u0026amp; Application\u003c\/p\u003e\u003cp\u003ePreviously Painted Surface:\u003c\/p\u003e\u003cp\u003eIn poor condition remove all previous coatings and prime the substrate, referring to the primer\/undercoat technical datasheet for further preparation instructions.\u003c\/p\u003e\u003cp\u003eIn good condition wash down with a suitable detergent, rinse with fresh water and allow to dry\u003c\/p\u003e\u003cp\u003eAbrade with 280 - 320 grit paper and remove sanding residue\u003c\/p\u003e\u003cp\u003eWipe with Brushing LIquid 333 and allow to dry completely.\u003c\/p\u003e\u003cp\u003eAll Substrates:\u003c\/p\u003e\u003cp\u003ePrime with a suitable primer or primer\/undercoat\u003c\/p\u003e\u003cp\u003eApplication Methods:\u003c\/p\u003e\u003cp\u003eSand the undercoat smooth with 120 - 400 grit wet or dry paper\u003c\/p\u003e\u003cp\u003eRemove dust with a dust wipe\u003c\/p\u003e\u003cp\u003eApply 2-3 coats of Toplac Plus with 8-16 hours depending on ambient temperature (refer to the table above)\u003c\/p\u003e\u003cp\u003eAmbient temperatures should be between 41° F and 95° F\u003c\/p\u003e\u003cp\u003eDo not exceed 10% thinner by volume\u003c\/p\u003e\u003cp\u003eClick here for Interlux Toplac Plus Topside Boat Paint Application Information\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is Toplac Plus used for, and where on the boat can it be applied? Toplac Plus is a topside paint for use above the waterline. It's suitable for hulls, decks, cabins, and trim. It's not an antifouling paint and should not be used below the waterline.\u003c\/li\u003e\n\u003cli\u003eDo I need to thin Toplac Plus, and which thinner should I use? Thinning depends on your application method. For brush or roller application, add up to 10% of Interlux 2333N Reducing Solvent. For spray application, use Interlux 216 Special Thinner instead. Do not exceed 10% thinner by volume regardless of method. For cleanup, use Interlux 333 Brushing Liquid.\u003c\/li\u003e\n\u003cli\u003eDoes this paint require tipping after rolling, or will it self-level? One of Toplac Plus's key advantages is that it doesn't require tipping. Its flow and leveling characteristics produce a smooth finish straight off the roller, which is a me…\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Interlux Paint","offers":[{"title":"Snow White - YLK000 \/ Gallon","offer_id":50581713027330,"sku":"ILX-YLK000\/1GLUS","price":217.49,"currency_code":"USD","in_stock":true},{"title":"Snow White - YLK000 \/ Quart","offer_id":50581713060098,"sku":"ILX-YLK000\/1QTUS","price":75.99,"currency_code":"USD","in_stock":true},{"title":"Cream - YLK027 \/ Quart","offer_id":50581713092866,"sku":"ILX-YLK027\/1QTUS","price":75.99,"currency_code":"USD","in_stock":true},{"title":"Yellow - YLK101 \/ Quart","offer_id":50581713125634,"sku":"ILX-YLK101\/1QTUS","price":75.99,"currency_code":"USD","in_stock":true},{"title":"Platinum - YLK151 \/ Quart","offer_id":50581713158402,"sku":"ILX-YLK151\/1QTUS","price":75.99,"currency_code":"USD","in_stock":true},{"title":"Mediterranean White - YLK184 \/ Gallon","offer_id":50581713191170,"sku":"ILX-YLK184\/1GLUS","price":217.19,"currency_code":"USD","in_stock":true},{"title":"Mediterranean White - YLK184 \/ Quart","offer_id":50581713223938,"sku":"ILX-YLK184\/1QTUS","price":75.99,"currency_code":"USD","in_stock":true},{"title":"Ivory - YLK187 \/ Quart","offer_id":50581713256706,"sku":"ILX-YLK187\/1QTUS","price":75.99,"currency_code":"USD","in_stock":true},{"title":"Off White - YLK192 \/ Quart","offer_id":50581713289474,"sku":"ILX-YLK192\/1QTUS","price":75.99,"currency_code":"USD","in_stock":true},{"title":"Oyster White - YLK194 \/ Quart","offer_id":50581713322242,"sku":"ILX-YLK194\/1QTUS","price":75.99,"currency_code":"USD","in_stock":true},{"title":"Matterhorn White - YLK198 \/ Quart","offer_id":50581713355010,"sku":"ILX-YLK198\/1QTUS","price":75.99,"currency_code":"USD","in_stock":true},{"title":"Bounty - YLK292 \/ Quart","offer_id":50581713387778,"sku":"ILX-YLK292\/1QTUS","price":75.99,"currency_code":"USD","in_stock":true},{"title":"Rochelle Red - YLK299 \/ Quart","offer_id":50581713420546,"sku":"ILX-YLK299\/1QTUS","price":75.99,"currency_code":"USD","in_stock":true},{"title":"Donegal Green - YLK541 \/ Quart","offer_id":50581713453314,"sku":"ILX-YLK541\/1QTUS","price":75.99,"currency_code":"USD","in_stock":true},{"title":"Atlantic Gray - YLK684 \/ Quart","offer_id":50581713486082,"sku":"ILX-YLK684\/1QTUS","price":75.99,"currency_code":"USD","in_stock":false},{"title":"Sapphire Blue - YLK830 \/ Quart","offer_id":50581713518850,"sku":"ILX-YLK830\/1QTUS","price":75.99,"currency_code":"USD","in_stock":true},{"title":"Bondi Blue - YLK898 \/ Quart","offer_id":50581713551618,"sku":"ILX-YLK898\/1QTUS","price":75.99,"currency_code":"USD","in_stock":true},{"title":"Lauderdale Blue - YLK936 \/ Quart","offer_id":50581713584386,"sku":"ILX-YLK936\/1QTUS","price":75.99,"currency_code":"USD","in_stock":false},{"title":"Flag Blue - YLK990 \/ Quart","offer_id":50581713617154,"sku":"ILX-YLK990\/1QTUS","price":75.99,"currency_code":"USD","in_stock":true},{"title":"Oxford Blue - YLK993 \/ Quart","offer_id":50581713649922,"sku":"ILX-YLK993\/1QTUS","price":75.99,"currency_code":"USD","in_stock":true},{"title":"Jet Black - YLK999 \/ Quart","offer_id":50581713682690,"sku":"ILX-YLK999\/1QTUS","price":75.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/892508_source_1761832073_5dac3745-1324-4c50-8d64-4b39286b0648.jpg?v=1791078397"},{"product_id":"interlux-bilgekote-marine-paint-quart","title":"Interlux Paint Bilgekote Marine Paint Quart","description":"\u003cp\u003eInterlux Bilgekote Bilge Enamel Marine Paint\u003c\/p\u003e\u003cp\u003eInterlux Bilgekote is a fast drying, durable coating formulated for application to bilge areas. This paint helps prevent absorption of oil, gasoline or sludge into wood and fiberglass. Features a semi gloss finish and is available in white or gray.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eHard wearing coating for bilges and bulkheads.\u003c\/p\u003e\u003cp\u003eChemical resistance to fumes, fuel and oil.\u003c\/p\u003e\u003cp\u003eHigh opacity for thorough coverage.\u003c\/p\u003e\u003cp\u003eCleans easily for reduced upkeep.\u003c\/p\u003e\u003cp\u003eSold in quarts\u003c\/p\u003e\u003cp\u003eHow to Apply Interlux Bilgekote Marine Paint\u003c\/p\u003e\u003cp\u003eApplication Method: Brush, roller, or spray\u003c\/p\u003e\u003cp\u003eNumber of Coats: Two coats minimum\u003c\/p\u003e\u003cp\u003eCoverage: 450 sq. ft.\/gal.\u003c\/p\u003e\u003cp\u003eThinner: Brushing Liquid 333 or Special Thinner 216\u003c\/p\u003e\u003cp\u003eDry Times\u003c\/p\u003e\u003cp\u003e59°F\u003c\/p\u003e\u003cp\u003e73°F\u003c\/p\u003e\u003cp\u003e95°F\u003c\/p\u003e\u003cp\u003eTouch Dry\u003c\/p\u003e\u003cp\u003e3 hours\u003c\/p\u003e\u003cp\u003e2 hours\u003c\/p\u003e\u003cp\u003e1 hour\u003c\/p\u003e\u003cp\u003eOvercoated By (min)\u003c\/p\u003e\u003cp\u003e16 hours\u003c\/p\u003e\u003cp\u003e12 hours\u003c\/p\u003e\u003cp\u003e8 hours\u003c\/p\u003e\u003cp\u003eSurface Preparation\u003c\/p\u003e\u003cp\u003eBare Fiberglass In Good Condition:\u003c\/p\u003e\u003cp\u003eBegin by scrubbing well using soap and water and a stiff brush.\u003c\/p\u003e\u003cp\u003eRinse with fresh water and allow to dry.\u003c\/p\u003e\u003cp\u003eDegrease with YMA601V Fiberglass Surface Prep.\u003c\/p\u003e\u003cp\u003eSand with 180 grade paper. Remove sanding residue.\u003c\/p\u003e\u003cp\u003eBare Fiberglass In Poor Condition:\u003c\/p\u003e\u003cp\u003eClean as above.\u003c\/p\u003e\u003cp\u003eSand with 80 grade paper then remove sanding residue.\u003c\/p\u003e\u003cp\u003eApply 1-2 coats of Pre-Kote primer.\u003c\/p\u003e\u003cp\u003eSand each coat with 120 grit sandpaper then remove sanding residue.\u003c\/p\u003e\u003cp\u003eBare Wood\u003c\/p\u003e\u003cp\u003eSand surface then wipe clean.\u003c\/p\u003e\u003cp\u003eApply Pre-Kote, sand surface and wipe clean.\u003c\/p\u003e\u003cp\u003eBare Metal\u003c\/p\u003e\u003cp\u003eSandblast or grind, remove sanding residue.\u003c\/p\u003e\u003cp\u003eWithin 1 hour of abrasion, apply 1 coat of Interprotect 2000E thinned 15-20%.\u003c\/p\u003e\u003cp\u003eFollowing the overcoating guidelines for Interprotect 2000E. Apply 1-2 coats of Pre-Kote.\u003c\/p\u003e\u003cp\u003eClear Epoxy\u003c\/p\u003e\u003cp\u003eBegin by scrubbing well using soap and water and a stiff brush.\u003c\/p\u003e\u003cp\u003eRinse with fresh water and allow to dry.\u003c\/p\u003e\u003cp\u003eDegrease with YMA601V Fiberglass Surface Prep.\u003c\/p\u003e\u003cp\u003eSand with 80 grit paper then remove sanding residue.\u003c\/p\u003e\u003cp\u003eApply one coat of Epoxy Primekote or Interprotect 2000E.\u003c\/p\u003e\u003cp\u003ePreviously Painted Surfaces\u003c\/p\u003e\u003cp\u003eThe surface must be clean and dry.\u003c\/p\u003e\u003cp\u003eSand using 180-220 grit paper, then remove sanding residue.\u003c\/p\u003e\u003cp\u003eApplication\u003c\/p\u003e\u003cp\u003eApply 2-3 coats of Bilgekote following the proper dry times.\u003c\/p\u003e\u003cp\u003eSand between coats using 220-230 grit paper, then remove sanding residue.\u003c\/p\u003e\u003cp\u003eBilgekote may be applied by roller and brush using the roll and tip method.\u003c\/p\u003e\u003cp\u003eBilgekote may also be applied by spray.\u003c\/p\u003e\u003cp\u003eClick to Download Interlux Bilgekote Application Instructions\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is Interlux Bilgekote Bilge Enamel Marine Paint used for? Interlux Bilgekote Bilge Enamel Marine Paint is a fast-drying, durable coating formulated for bilge areas and bulkheads. It helps prevent oil, gasoline, and sludge from being absorbed into wood and fiberglass while providing a hard-wearing surface that can be cleaned easily.\u003c\/li\u003e\n\u003cli\u003eWhat surfaces can Interlux Bilgekote be applied to? Interlux Bilgekote can be applied to properly prepared fiberglass, wood, metal, clear epoxy, and previously painted surfaces. Surface preparation varies by substrate and may include cleaning, sanding, or applying the appropriate primer before the Bilgekote coating.\u003c\/li\u003e\n\u003cli\u003eHow many coats of Interlux Bilgekote should I apply? Apply a minimum of two coats of Interlux Bilgekote, with the application instructions allowing two to three coats. Sand between coats using 220-230 grit sandpaper and remove sanding residue before applying the next coat.\u003c\/li\u003e\n\u003cli\u003eHow can Interlux Bilgekote be applied? Interlux Bilgekote can be applied by brush, roller, or spray. When using a brush or roller, the product may be applied with the roll-and-tip method. The appropriate thinner for application is Brushing Liquid 333 or Special Thinner 216.\u003c\/li\u003e\n\u003cli\u003eHow long does Interlux Bilgekote take to dry? Drying time depends on temperature. At 73°F, Interlux Bilgekote is touch dry in approximately 2 hours and can be overcoated after a minimum of 12 hours. At 59°F, the minimum overcoat t…\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Interlux Paint","offers":[{"title":"Gray","offer_id":50581713879298,"sku":"ILX-YMA100","price":49.19,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":50581713912066,"sku":"ILX-YMA102","price":49.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/429370_source_1751999549_40281d97-00f4-4269-aa40-12b9a60a6cb2.jpg?v=1791078399"},{"product_id":"interlux-flattening-agent-for-1-part-finishes","title":"Interlux Paint Flattening Agent for 1 Part Finishes","description":"\u003cp\u003eInterlux Flattening Agent for 1 Part Finishes\u003c\/p\u003e\u003cp\u003eA Flattening Agent specially formulated for mixing with Interlux one-part finishes (Brightside Polurethane and Yacht Enamels) and varnishes (Schooner Gold, Original, Goldspar and Schooner) to produce a variety of gloss, satin or matte effect finishes. For interior and exterior use.\u003c\/p\u003e\u003cp\u003eThe addition of Flattening Agent to a finish or varnish will not affect the drying or overcoating characteristics of the product. It will not affect the durability of the finished surface.\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eFinish: Matte\u003c\/p\u003e\u003cp\u003eNumber of Coats: Add Flattening Agent to final coat\u003c\/p\u003e\u003cp\u003eThinner: Interlux Special Thinner\u003c\/p\u003e\u003cp\u003eIf required, thin 5% with Interlux Special Thinner.\u003c\/p\u003e\u003cp\u003eMixing Details:\u003c\/p\u003e\u003cp\u003eParts Finish or Varnish\u003c\/p\u003e\u003cp\u003eParts Flattening Agent\u003c\/p\u003e\u003cp\u003eGloss Range\u003c\/p\u003e\u003cp\u003e3\u003c\/p\u003e\u003cp\u003e1\u003c\/p\u003e\u003cp\u003eHigh Semi-Gloss\u003c\/p\u003e\u003cp\u003e1\u003c\/p\u003e\u003cp\u003e1\u003c\/p\u003e\u003cp\u003eSemi-Gloss\u003c\/p\u003e\u003cp\u003e1\u003c\/p\u003e\u003cp\u003e2\u003c\/p\u003e\u003cp\u003eLow Semi-Gloss\u003c\/p\u003e\u003cp\u003e1\u003c\/p\u003e\u003cp\u003e3\u003c\/p\u003e\u003cp\u003eFlat\u003c\/p\u003e\u003cp\u003e***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***\u003c\/p\u003e\u003cp\u003eHow To Apply\u003c\/p\u003e\u003cp\u003eAPPLICATION DATA METHOD: Brush, Conventional Spray, Roller\u003c\/p\u003e\u003cp\u003eNUMBER OF COATS: Variable\u003c\/p\u003e\u003cp\u003eAPPLICATION INFORMATION: Thin 5% with Special Thinner 216 if required. The addition of Flattening Agent YMA715 to a finish or varnish will not affect the drying or overcoating characteristics of the product. It will not affect the durability of the finished surface. As with all the types of reducedgloss coatings, the resulting finish will not have the same stay-clean properties as a full-gloss coating. If all the mixed (matted) material is not used it may be used at a later date. Simply stir well before use. The level of gloss will decrease where the amount of Flattening Agent YMA715 is increased. The opacity (ability to hide) of the chosen finish will be affected once the clear Flattening Agent YMA715 is added. For better hide apply the unflattened finish first and finish off with the mixed (flattened) material as a last coat, or apply the unflattened finish until opacity is achieved. Stir well before use. If all of the mixed material is not used it may be saved and used at a later date. Product temperature should be minimum 15°C\/60°F and maximum 30°C\/86°F. Ambient temperature should be minimum 5° C\/41°F and maximum 35°C\/95°F. Substrate temperature should be minimum 5°C\/41°F and maximum 35°C\/95°F.\u003c\/p\u003e\u003cp\u003eFollow the surface preparation instructions shown on the label of the finish or varnish to which the Flattening Agent is being added. Mixing Details - Typical Gloss Reduction using Flattening Agent YMA715 Parts Finish or Varnish :\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eParts Flattening Agent : Gloss Range\u003c\/li\u003e\n\u003cli\u003e3 : 1 : High Semi-Gloss\u003c\/li\u003e\n\u003cli\u003e1 : 1 : Semi-Gloss\u003c\/li\u003e\n\u003cli\u003e1 : 2 : Low Semi-Gloss\u003c\/li\u003e\n\u003cli\u003e1 : 3 : Flat\u003c\/li\u003e\n\u003cli\u003eOnly suitable for use with 1-part finishes or varnishes.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eHow to Apply\u003c\/p\u003e\u003cp\u003eMSDS\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"Default Title","offer_id":50581714043138,"sku":"ILX-YMA715","price":66.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/ilx-yma-715_lg__10797.1558116286.webp?v=1791078399"},{"product_id":"interlux-pre-kote-plus-boat-primer","title":"Interlux Paint Pre-Kote Plus Boat Primer","description":"\u003cp\u003eInterlux Pre-Kote Plus Boat Primer\u003c\/p\u003e\u003cp\u003eAs one of the largest manufacturers of marine paints and primers, Interlux is a name you can trust for high-quality products that provide long-lasting protection for your boat finishes. The innovative technology has been leading the way for over a century in boat primers and paints, including the Interlux Pre-Kote Plus boat primer. Interlux’s commitment to research and development has helped to create a high-performance boat primer that has stood the test of time.\u003c\/p\u003e\u003cp\u003ePre-Kote Plus is a one part primer and undercoat that offers substrate protection with an ultra-smooth finish. Designed for use above the waterline Pre-Kote plus can be directly applied to most substrates including properly prepared metal. The lower VOC formula allows for easier application with improved flow. DIY customers will find Pre-Kote Plus to offer excellent flow, leveling, and easy to sand. Pre-Kote Plus is easy to use and the perfect foundation for your topcoat.\u003c\/p\u003e\u003cp\u003eFor an extra smooth  application should be done with a brush or roller, with a conventional sprayer being acceptable too. Interlux primer has a reduced working time with great substrate protection. It is recommended to apply 2-4 coats, depending on desired thickness. Make sure to correct surface imperfections before application. Sanding between each application is recommended for optimal application. Interlux Pre-Kote Plus is available in quarts and gallons. Each gallon covers ~440 sq\/ft.\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eFinish: Matte\u003c\/p\u003e\u003cp\u003eApplication Method: Brush, roller or spray\u003c\/p\u003e\u003cp\u003eNumber of Coats: 2-4\u003c\/p\u003e\u003cp\u003eCoverage: 440 sq. ft\/gal per coat\u003c\/p\u003e\u003cp\u003eAssociated Products:\u003c\/p\u003e\u003cp\u003eThinner\/Cleaner\u003c\/p\u003e\u003cp\u003e2333N Reducing Solvent\u003c\/p\u003e\u003cp\u003e333 Brushing Thinner\u003c\/p\u003e\u003cp\u003e216 Special Thinner\u003c\/p\u003e\u003cp\u003eDo not use this product on aluminum outdrives\u003c\/p\u003e\u003cp\u003eHow To Apply Pre-Kote Plus Primer\u003c\/p\u003e\u003cp\u003eInterlux Pre-Kote is compatible with the following Interlux finishes: Bilgekote, Interdeck, Pre-Kote Plus, Toplac Plus, and Watertite.\u003c\/p\u003e\u003cp\u003eApplication Method:  Brush, Roller, Conventional Spray - Pressure Pot or Siphon Cup\u003c\/p\u003e\u003cp\u003eNumber of Coats: 2-4 As Needed\u003c\/p\u003e\u003cp\u003eDry Film Thickness per Coat: 1.9 mils (4 wet mils)\u003c\/p\u003e\u003cp\u003eCoverage: 440 sq. ft\/gal.\u003c\/p\u003e\u003cp\u003eApplication Temp: 41°F Min. \/ 95°F Max.\u003c\/p\u003e\u003cp\u003eThinning: Not usually required. Pre-Kote Plus can be thinned up to 10%. If thinned an additional coat may be required to achieve film thickness required to protect substrate\u003c\/p\u003e\u003cp\u003eBrush: Solvent resistant standard brush\u003c\/p\u003e\u003cp\u003eRoller: 4mm nap velour roller (If foam rollers are used a lower film build\/opacity may be achieved and an additional coat required)\u003c\/p\u003e\u003cp\u003eDRY TIMES:\u003c\/p\u003e\u003cp\u003eTemp\u003c\/p\u003e\u003cp\u003eHard Dry\u003c\/p\u003e\u003cp\u003eTouch Dry\u003c\/p\u003e\u003cp\u003eSandable\u003c\/p\u003e\u003cp\u003e95°F\u003c\/p\u003e\u003cp\u003e2.5 Hours\u003c\/p\u003e\u003cp\u003e1 Hour\u003c\/p\u003e\u003cp\u003e8 Hours\u003c\/p\u003e\u003cp\u003e77°F\u003c\/p\u003e\u003cp\u003e3 Hours\u003c\/p\u003e\u003cp\u003e2 Hours\u003c\/p\u003e\u003cp\u003e12 Hours\u003c\/p\u003e\u003cp\u003e59°F\u003c\/p\u003e\u003cp\u003e5 Hours\u003c\/p\u003e\u003cp\u003e3 Hours\u003c\/p\u003e\u003cp\u003e18 Hours\u003c\/p\u003e\u003cp\u003e41°F\u003c\/p\u003e\u003cp\u003e12 Hours\u003c\/p\u003e\u003cp\u003e6 Hours\u003c\/p\u003e\u003cp\u003e36 Hours\u003c\/p\u003e\u003cp\u003eNote: Pre-Kote Plus must be sanded between coats.\u003c\/p\u003e\u003cp\u003eSurface Preparation \u0026amp; Application\u003c\/p\u003e\u003cp\u003ePreviously Painted Surfaces\u003c\/p\u003e\u003cp\u003eIf in poor condition remove all previous coatings\u003c\/p\u003e\u003cp\u003eWash Down with a suitable detergent, rinse with fresh water and allow to dry\u003c\/p\u003e\u003cp\u003eSand with 220-280 grit paper\u003c\/p\u003e\u003cp\u003eRemove all sanding residue\u003c\/p\u003e\u003cp\u003eWipe with 333 Brushing Thinner and allow to dry\u003c\/p\u003e\u003cp\u003eBarewood\u003c\/p\u003e\u003cp\u003eSand with 80 - 180 grit paper\u003c\/p\u003e\u003cp\u003eRemove sanding dust by brushing dusting and wiping\u003c\/p\u003e\u003cp\u003eWipe with 2333N Reducing Solvent\u003c\/p\u003e\u003cp\u003ePlywood\u003c\/p\u003e\u003cp\u003eFollow directions above for bare wood\u003c\/p\u003e\u003cp\u003eApply Inter-Prime Wood Sealer Clear 1026\u003c\/p\u003e\u003cp\u003eSteel\u003c\/p\u003e\u003cp\u003eDegrease with solvent or suitable detergent cleaner\u003c\/p\u003e\u003cp\u003eGritblast to Sa 2-1\/2 - near white metal surface\u003c\/p\u003e\u003cp\u003eIf gritblasting is not possible, grind the metal surface with 24-36 grit abrasive discs\u003c\/p\u003e\u003cp\u003eGrind to a uniform clean bright metals surface 50-75 micron anchor pattern\u003c\/p\u003e\u003cp\u003eUse an angle grinder on small areas\u003c\/p\u003e\u003cp\u003eClean thoroughly and allow to dry completely\u003c\/p\u003e\u003cp\u003eAluminum\u003c\/p\u003e\u003cp\u003eDegrease with solvent or suitable detergent cleaner\u003c\/p\u003e\u003cp\u003eSan well using 24 - 120 grit alum…\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"5822790","offer_id":50581714141442,"sku":"ILX-YUC000\/1QTUS","price":53.99,"currency_code":"USD","in_stock":false},{"title":"5822793","offer_id":50581714174210,"sku":"ILX-YUC000\/1GLUS","price":169.49,"currency_code":"USD","in_stock":true},{"title":"5824260","offer_id":50581714206978,"sku":"ILX-YUC001\/QTUS","price":53.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/0000q__48007.1780061460.webp?v=1791078401"},{"product_id":"interlux-schooner-gold-marine-varnish-qt","title":"Interlux Paint Schooner Gold Varnish Qt","description":"\u003cp\u003eInterlux Schooner Gold Marine Varnish QT\u003c\/p\u003e\u003cp\u003eAdvanced, High Build formulation for Applicators who prefer a High Viscosity product.\u003c\/p\u003e\u003cp\u003eSchooner Gold is the latest varnish from Interlux, offering higher film build that allows both Professional Applicators and boat owners to achieve great results faster and in fewer coats. Schooner Gold has shown to out-perform other leading brands and will offer superb longevity and durability.Schooner Gold has been formulated using an optimized blend of premium UV absorbers, HALS and resins to ensure the product's exceptional deep gloss and color are retained over the lifetime of the coating. Suitable for all internal and external woods, and can be applied directly to oily timber, such as teak.\u003c\/p\u003e\u003cp\u003eAdvanced UV Technology\u003c\/p\u003e\u003cp\u003eLongest lasting one-part varnish - 12 months or more in Florida!\u003c\/p\u003e\u003cp\u003eTraditional amber color\u003c\/p\u003e\u003cp\u003eHigh build formulation achieves aesthetic results in fewer coats\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eFinish: High Gloss\u003c\/p\u003e\u003cp\u003eNumber of Coats: 2-6\u003c\/p\u003e\u003cp\u003eApplication: Brush, roller \u0026amp; spray\u003c\/p\u003e\u003cp\u003eAssociated Products\u003c\/p\u003e\u003cp\u003eInterlux Brush Thinner -To ease application for roller and brush\u003c\/p\u003e\u003cp\u003eInterlux Special Thinner -Spraying Application\u003c\/p\u003e\u003cp\u003e***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***\u003c\/p\u003e\u003cp\u003eHow to Apply\u003c\/p\u003e\u003cp\u003eHOW TO APPLY INTERLUX SCHOONER GOLD MARINE VARNISH QT\u003c\/p\u003e\u003cp\u003eAPPLICATION: Brush, Roller, Conventional Spray\u003c\/p\u003e\u003cp\u003eFINISH: High Gloss\u003c\/p\u003e\u003cp\u003eNUMBER OF COATS: Previously varnished wood: 2-4 unthinned coats (4-6 coats if thinned).\u003c\/p\u003e\u003cp\u003eBare wood: 2 thinned coats, then 4 unthinned coats (6 coats if thinned).\u003c\/p\u003e\u003cp\u003eCOVERAGE: (Theoretical) – 582.1\/gal by brush | (Practical) – 525.1 \/gal by brush\u003c\/p\u003e\u003cp\u003eTHINNER: Brush – Brushing Liquid 333 | Spray – Special Thinner 216\u003c\/p\u003e\u003cp\u003eDRY TIMES:\u003c\/p\u003e\u003cp\u003eTemperature\u003c\/p\u003e\u003cp\u003eHard Dry\u003c\/p\u003e\u003cp\u003eTouch Dry\u003c\/p\u003e\u003cp\u003e50ºF\u003c\/p\u003e\u003cp\u003e12 HRS\u003c\/p\u003e\u003cp\u003e4 HRS\u003c\/p\u003e\u003cp\u003e59°F\u003c\/p\u003e\u003cp\u003e9 HRS\u003c\/p\u003e\u003cp\u003e4 HRS\u003c\/p\u003e\u003cp\u003e73ºF\u003c\/p\u003e\u003cp\u003e6 HRS\u003c\/p\u003e\u003cp\u003e2 HRS\u003c\/p\u003e\u003cp\u003e95ºF\u003c\/p\u003e\u003cp\u003e3 HRS\u003c\/p\u003e\u003cp\u003e1 HR\u003c\/p\u003e\u003cp\u003eOVERCOAT BY:\u003c\/p\u003e\u003cp\u003eTemperature\u003c\/p\u003e\u003cp\u003eMinimum\u003c\/p\u003e\u003cp\u003eMaximum\u003c\/p\u003e\u003cp\u003e50ºF\u003c\/p\u003e\u003cp\u003e16 Hrs\u003c\/p\u003e\u003cp\u003e1 Month\u003c\/p\u003e\u003cp\u003e59°F\u003c\/p\u003e\u003cp\u003e14 Hrs\u003c\/p\u003e\u003cp\u003e1 Month\u003c\/p\u003e\u003cp\u003e73ºF\u003c\/p\u003e\u003cp\u003e12 Hrs\u003c\/p\u003e\u003cp\u003e1 Month\u003c\/p\u003e\u003cp\u003e95ºF\u003c\/p\u003e\u003cp\u003e8 Hrs\u003c\/p\u003e\u003cp\u003e1 Month\u003c\/p\u003e\u003cp\u003ePREPARATION PROCEDURES:\u003c\/p\u003e\u003cul\u003e\u003cli\u003ePreviously Varnished Wood\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eIn good condition clean with thinners; sand with 280-320 grade (grit) paper. Remove sanding dust with thinners.\u003c\/p\u003e\u003cp\u003eIn poor condition, remove all previous coatings. Apply 2-6 coats until a satisfactory finish is achieved. Sand after every second coat using 320-400 grade paper. Remove sanding dust with dust wipe.\u003c\/p\u003e\u003cp\u003eBare Wood\u003c\/p\u003e\u003cp\u003eSand smooth with 80-180 grade paper and then 280 grade paper. Clean surface by brushing, dusting or wiping. If wiping with solvent, then allow to dry completely before applying first coat of varnish.\u003c\/p\u003e\u003cp\u003eOily Woods (e.g. Teak)\u003c\/p\u003e\u003cp\u003eMust be adequately degreased (Brushing Liquid 333 is recommended) and prepared prior to the application of Schooner Gold.\u003c\/p\u003e\u003cp\u003ePrime, if required, with Clear Wood Sealer.\u003c\/p\u003e\u003cp\u003eAPPLICATION:\u003c\/p\u003e\u003cp\u003eIf Clear Wood Sealer has been omitted, thin the first coat by 50% using Brushing Liquid 333. Apply the second coat thinned 25% with Brushing Liquid 333. Following coats can be thinned up to 15% dependent on ambient temperature, application conditions and personal preference using Brushing Liquid 333.\u003c\/p\u003e\u003cp\u003eApply a further 4-6 coats (brush)\/5-8 coats (roller), until a satisfactory finish is achieved. Sand after every second coat using 320-400 grade paper.\u003c\/p\u003e\u003cp\u003eApplication Specifications\u003c\/p\u003e\u003cp\u003eStir thoroughly before use\u003c\/p\u003e\u003cp\u003eBrush\u003c\/p\u003e\u003cp\u003eUse a clean brush that is kept specifically for varnishing. Clean brushes before use.\u003c\/p\u003e\u003cp\u003eConventional Spray\u003c\/p\u003e\u003cp\u003ePressure Pot – 1-2 bar 14.5-29 psi (gun pressure), 8-10 psi (ai…\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"Default Title","offer_id":50581714338050,"sku":"ILX-YVA-500Q","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/ilx-yva-500q_lg__35359.1722493349.jpg?v=1791078402"}],"url":"https:\/\/allmarineworld.com\/collections\/interlux-paint.oembed?page=2","provider":"All Marine World","version":"1.0","type":"link"}