{"title":"Hatch","description":"\u003cp\u003eHatch currently published by All Marine World.\u003c\/p\u003e","products":[{"product_id":"attwood-flush-hatch-pull","title":"Attwood Hatch Pull","description":"\u003cp\u003eAttwood Flush Hatch Pull\u003c\/p\u003e\u003cp\u003eThe Attwood Flush Hatch Pull is an easy access handle for installation in lids, doors, compartments and hatches. Constructed from durable ABS, with a textured black finish. This hatch pull has a low-profile design and its deep bottom allows even gloved hands to easily grip the handle.\u003c\/p\u003e\u003cp\u003eInstallation Instructions\u003c\/p\u003e\u003cp\u003eHOW TO INSTALL ATTWOOD FLUSH HATCH PULL\u003c\/p\u003e\u003cp\u003eNeeded for Installation\u003c\/p\u003e\u003cp\u003eCenter punch or awl\u003c\/p\u003e\u003cp\u003e1-5\/8” hole saw\u003c\/p\u003e\u003cp\u003eSmall hand saw\u003c\/p\u003e\u003cp\u003eDrill and suitable drill bits\u003c\/p\u003e\u003cp\u003eScrewdriver\u003c\/p\u003e\u003cp\u003e(4) #6 or #8 bugle head screws\u003c\/p\u003e\u003cp\u003eInstallation\u003c\/p\u003e\u003cp\u003eMark Installation Hole\u003c\/p\u003e\u003cp\u003eSelect a location that will not interfere with hatch frame.\u003c\/p\u003e\u003cp\u003eWith handle facing edge of hatch, place template in desired location. Ensure that template is parallel with hatch, so that hatch pull will be straight when installed.\u003c\/p\u003e\u003cp\u003eUsing punch or awl, mark hatch trough template at four attaching screw locations, then mark the two installation hole centerlines.\u003c\/p\u003e\u003cp\u003eNote: The two installation holes must be marked on-line to ensure proper hatch pull alignment.\u003c\/p\u003e\u003cp\u003eDrill Holes\u003c\/p\u003e\u003cp\u003eDrill two installation holes with the 1-5\/8” hole saw. Use hand saw to remove material between installation holes.\u003c\/p\u003e\u003cp\u003eWith handle opening facing edge of hatch, place bottom portion of hatch pull into installation hole and check for proper fit.\u003c\/p\u003e\u003cp\u003ePosition top portion of hatch pull and ensure that screw holes are aligned with marks on hatch-if not, make a new mark through screw holes.\u003c\/p\u003e\u003cp\u003eDrill all four attaching screw holes.\u003c\/p\u003e\u003cp\u003eInstall Hatch Pull\u003c\/p\u003e\u003cp\u003eInstall bottom portion of hatch pull first, then top portion. Ensure handle opening is facing edge of hatch.\u003c\/p\u003e\u003cp\u003eInstall and tighten four attaching screws.\u003c\/p\u003e\u003cp\u003eInformation sourced from the Attwood Flush Hatch Pull Installation Instructions\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":50581495972098,"sku":"ATT-2027-7","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/att-2027-7_lg__00931.1558181741_8fe6fe10-3771-440d-8fcf-ba5ad5fe0b33.jpg?v=1791076771"},{"product_id":"gen3-marine-large-boat-hatch","title":"Gen3 Marine Large Locking Storage Hatch T Handle Plastic Opening","description":"\u003cp\u003eGen3 Marine Large Boat Hatch\u003c\/p\u003e\u003cp\u003eThis large boat storage hatch is functional and designed to last in marine environments. The dual T-handles can be used to engage the cam locks to hold the lid secure when not in use. Comprised of two separate pieces, the integral hinge design allows the lid to be moved out of the way when the hatch is in use.\u003c\/p\u003e\u003cp\u003eProduct Features:\u003c\/p\u003e\u003cp\u003eLocking\u003c\/p\u003e\u003cp\u003eDual T-Handles\u003c\/p\u003e\u003cp\u003eFlush Hardware\u003c\/p\u003e\u003cp\u003eBoat Hatch Specifications:\u003c\/p\u003e\u003cp\u003eOuter Diameter\u003c\/p\u003e\u003cp\u003eWidth: 16.75\"\u003c\/p\u003e\u003cp\u003eLength: 12.25\"\u003c\/p\u003e\u003cp\u003eLid\u003c\/p\u003e\u003cp\u003eWidth: 13.375\"\u003c\/p\u003e\u003cp\u003eLength: 9.125\"\u003c\/p\u003e\u003cp\u003eT-Handle\u003c\/p\u003e\u003cp\u003eWidth: 2.375\"\u003c\/p\u003e","brand":"Gen3 Marine","offers":[{"title":"Default Title","offer_id":50581682880770,"sku":"GEN-5-1010","price":61.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/Gen-3-Marine-5-1010-Large-Opening-Storage-Hatch__51959.1722499827_398879f1-b1b0-44ca-9a6c-72729223d591.jpg?v=1791078223"},{"product_id":"gen3-marine-small-boat-hatch","title":"Gen3 Marine Small Locking Storage Hatch O Handle Plastic Opening ic Opening Storage Hatch","description":"\u003cp\u003eGen3 Marine Small Boat Hatch\u003c\/p\u003e\u003cp\u003eThis small boat storage hatch is functional and designed to last in marine environments. The single O-handle can be used to engage the cam lock to hold the lid secure when not in use. The internal hinge system allows you to raise and lower the hatch lid as needed.\u003c\/p\u003e\u003cp\u003eProduct Features:\u003c\/p\u003e\u003cp\u003eLocking\u003c\/p\u003e\u003cp\u003eO-Pull Handle\u003c\/p\u003e\u003cp\u003eFlush Hardware\u003c\/p\u003e\u003cp\u003eBoat Hatch Specifications:\u003c\/p\u003e\u003cp\u003eOuter Diameter\u003c\/p\u003e\u003cp\u003eWidth: 14.75\"\u003c\/p\u003e\u003cp\u003eLength: 10.875\"\u003c\/p\u003e\u003cp\u003eLid\u003c\/p\u003e\u003cp\u003eWidth: 11.75\"\u003c\/p\u003e\u003cp\u003eLength: 7.75\"\u003c\/p\u003e\u003cp\u003eO-Handle\u003c\/p\u003e\u003cp\u003eWidth: 1.75\"\u003c\/p\u003e","brand":"Gen3 Marine","offers":[{"title":"Default Title","offer_id":50581682979074,"sku":"GEN-5-1011","price":61.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/Gen-3-Marine-5-1011-Small-Opening-Storage-Hatch__52645.1722491416_bf34947f-944c-4fcc-83b4-bcc69115a05e.webp?v=1791078224"},{"product_id":"lenco-rocker-switch-for-single-cylinder-hatch-lift","title":"Lenco Trim Tabs Rocker Switch For Sgl H Lift","description":"\u003cp\u003eLenco Rocker Switch for Single Cylinder Hatch Lift\u003c\/p\u003e\u003cp\u003eSingle rocker switch with deutsch plug and two 30\" non-terminated power leads for Lenco Marine Single Cylinder Hatch Lifts.\u003c\/p\u003e\u003cp\u003eLenco Rocker Switch for Single Cylinder Hatch Lift\u003c\/p\u003e","brand":"Lenco Trim Tabs","offers":[{"title":"Default Title","offer_id":50581773877506,"sku":"LEN-15096-001","price":82.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/LEN-15096-001_lg__02716.1558114676_e103ae41-3a42-4327-9f55-6f80b5499e9d.jpg?v=1791078818"},{"product_id":"lenco-rocker-switch-dual-hatch-lift","title":"Lenco Trim Tabs Rocker Switch For Twin H Lift","description":"\u003cp\u003eLenco Rocker Switch - Dual Hatch Lift\u003c\/p\u003e\u003cp\u003eLenco Single Rocker Switch for Dual Gatch Lifts. Runs two hatch lifts at the same time. Compatible with any boat.\u003c\/p\u003e","brand":"Lenco Trim Tabs","offers":[{"title":"Default Title","offer_id":50581773975810,"sku":"LEN-15098-001","price":109.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/LEN-15098-001__28377.1722496283.jpg?v=1791078819"},{"product_id":"lenco-12-volt-electric-hatch-lifts","title":"Lenco Trim Tabs 12-Volt Electric Hatch Lifts","description":"\u003cp\u003eLenco Electric Hatch Lifts - 12 Volt\u003c\/p\u003e\u003cp\u003eLenco 12 Volt Electric Hatch Lifts feature 2' leads and deutsch connectors. The inline motor design delivers over 500 lbs. of force. Each electric hatch lift includes high-impact, corrosion-proof mounting brackets and stainless steel pull pins. These hatch lifts are designed with a clutch-less ball screw design that will not drift, will never bind, and runs in sync on dual lift applications. Lenco Electric Hatch Lifts come backed by a two year manufacturer's warranty.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eClutchless ball screw design will not drift, never binds and runs in sync on dual lift applications\u003c\/p\u003e\u003cp\u003eInline motor design delivers over 500 lbs. (226.79 Kg) of force\u003c\/p\u003e\u003cp\u003eWaterproof, made entirely of non-corrosive materials\u003c\/p\u003e\u003cp\u003eBall screw spins freely when hatch is fully opened or closed eliminating limit switches and burned out motors\u003c\/p\u003e\u003cp\u003eVandar mounting brackets with stainless steel pull pins\u003c\/p\u003e\u003cp\u003ePowdered metal gears for strength and  precision\u003c\/p\u003e\u003cp\u003eStainless steel ram locks in any position\u003c\/p\u003e\u003cp\u003eCE Certified and ABYC compliant\u003c\/p\u003e\u003cp\u003eO-ring sealed at 100 psi\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eAmp Draw: 10 Amps @ 12 Volt\u003c\/p\u003e\u003cp\u003eNote: L.O.A. = Length Overall, measuring from top bracket to bottom bracket\u003c\/p\u003e\u003cp\u003ePart #\u003c\/p\u003e\u003cp\u003eL.O.A. Retracted\u003c\/p\u003e\u003cp\u003eApproximate Stroke\u003c\/p\u003e\u003cp\u003eL.O.A. Extended\u003c\/p\u003e\u003cp\u003e20760-001\u003c\/p\u003e\u003cp\u003e15\"\u003c\/p\u003e\u003cp\u003e4\"\u003c\/p\u003e\u003cp\u003e19\"\u003c\/p\u003e\u003cp\u003e20762-001\u003c\/p\u003e\u003cp\u003e20\"\u003c\/p\u003e\u003cp\u003e6\"\u003c\/p\u003e\u003cp\u003e26\"\u003c\/p\u003e\u003cp\u003e20764-001\u003c\/p\u003e\u003cp\u003e20\"\u003c\/p\u003e\u003cp\u003e8\"\u003c\/p\u003e\u003cp\u003e28\"\u003c\/p\u003e\u003cp\u003e20766-001\u003c\/p\u003e\u003cp\u003e24\"\u003c\/p\u003e\u003cp\u003e8'\u003c\/p\u003e\u003cp\u003e32\"\u003c\/p\u003e\u003cp\u003e20768-001\u003c\/p\u003e\u003cp\u003e24\"\u003c\/p\u003e\u003cp\u003e12\"\u003c\/p\u003e\u003cp\u003e36\"\u003c\/p\u003e\u003cp\u003e20770-001\u003c\/p\u003e\u003cp\u003e29\"\u003c\/p\u003e\u003cp\u003e12\"\u003c\/p\u003e\u003cp\u003e41\"\u003c\/p\u003e\u003cp\u003e20774-001\u003c\/p\u003e\u003cp\u003e29\"\u003c\/p\u003e\u003cp\u003e16\"\u003c\/p\u003e\u003cp\u003e45\"\u003c\/p\u003e\u003cp\u003e20776-001\u003c\/p\u003e\u003cp\u003e33\"\u003c\/p\u003e\u003cp\u003e16\"\u003c\/p\u003e\u003cp\u003e49\"\u003c\/p\u003e\u003cp\u003e20778-001\u003c\/p\u003e\u003cp\u003e33\"\u003c\/p\u003e\u003cp\u003e20\"\u003c\/p\u003e\u003cp\u003e53\"\u003c\/p\u003e\u003cp\u003e20780-001\u003c\/p\u003e\u003cp\u003e37\"\u003c\/p\u003e\u003cp\u003e20\"\u003c\/p\u003e\u003cp\u003e57\"\u003c\/p\u003e\u003cp\u003e20782-001\u003c\/p\u003e\u003cp\u003e37\"\u003c\/p\u003e\u003cp\u003e24\"\u003c\/p\u003e\u003cp\u003e61\"\u003c\/p\u003e\u003cp\u003e20784-001\u003c\/p\u003e\u003cp\u003e41\"\u003c\/p\u003e\u003cp\u003e24'\u003c\/p\u003e\u003cp\u003e65\"\u003c\/p\u003e\u003cp\u003e20786-001\u003c\/p\u003e\u003cp\u003e47\"\u003c\/p\u003e\u003cp\u003e26\"\u003c\/p\u003e\u003cp\u003e73\"\u003c\/p\u003e\u003cp\u003e20788-001\u003c\/p\u003e\u003cp\u003e47\"\u003c\/p\u003e\u003cp\u003e30\"\u003c\/p\u003e\u003cp\u003e77\"\u003c\/p\u003e\u003cp\u003eClick to Download Lenco Electric Hatch Lift Specification Sheet\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHow do I determine which size hatch lift to order? The size options use a two-number format: the first number is the retracted length (bracket to bracket), the second is the stroke (how far it extends), and the total is the fully extended length. For example, \"20\"+6\"=26\"\" means the lift is 20\" when closed and 26\" when fully open. To size correctly, measure the distance between your mounting points when the hatch is closed. That is your retracted length. Then confirm that the stroke is sufficient to fully open your hatch at the angle you need. Note that the total installed length is measured from the top bracket to the bottom bracket.\u003c\/li\u003e\n\u003cli\u003eDoes the hatch hold its position, or will it drift down on its own? The clutchless ball screw design is self-locking. It won't drift and holds the hatch in any position along its stroke without requiring a separate lock or prop. This is a key advantage over gas struts and some older actuator designs that can creep over time.\u003c\/li\u003e\n\u003cli\u003eDoes this hatch lift require limit switches to prevent motor burnout? No. The ball screw spins freely at both ends of its travel when the hatch is fully opened or fully closed, which eliminates the need for limit switches entirely. This also removes a common failure point, burned out motors from running against a hard stop, that affects other electric actuator designs.\u003c\/li\u003e\n\u003cli\u003eCan two hatch lifts be run in sync on a dual-lift application? Yes. The ball screw runs in sync on dual lift applications without binding or drifting independently. This makes it suitable for larger or heavier hatches that require support at two points.\u003c\/li\u003e\n\u003cli\u003eWhat does the hatch lift draw in electrical current, and what wiring is included? The unit draws 10 amps at 12 volts. Each hatch lift comes with 2-foot leads and Deutsch connectors. A rocker switch for control is sold separately. Lenco's single-cylinder hatch lift rocker switch connects via the Deutsch plug system.\u003c\/li\u003e\n\u003cli\u003eWhat certifications and warranty does this hatch lift carry? The Lenco Electric Hatch Lift is CE certified, ABYC compliant, and O-ring sealed to 100 psi for waterproofing. It's backed by a two-year manufacturer's warranty against defects. All materials are non-corrosive, making it suitable for…\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lenco Trim Tabs","offers":[{"title":"15\" Retracted + 4\" Stroke = 19\" Total - 20760-001","offer_id":50581774958850,"sku":"LEN-20760-001","price":527.99,"currency_code":"USD","in_stock":true},{"title":"20\" Retracted + 8\" Stroke = 28\" Total - 20764-001","offer_id":50581774991618,"sku":"LEN-20764-001","price":561.99,"currency_code":"USD","in_stock":true},{"title":"24\" Retracted + 12\" Stroke = 36\" Total - 20768-001","offer_id":50581775024386,"sku":"LEN-20768-001","price":597.49,"currency_code":"USD","in_stock":true},{"title":"24\" Retracted + 8\" Stroke = 32\" Total - 20766-001","offer_id":50581775057154,"sku":"LEN-20766-001","price":561.99,"currency_code":"USD","in_stock":false},{"title":"29\" Retracted + 12\" Stroke = 41\" Total - 20770-001","offer_id":50581775089922,"sku":"LEN-20770-001","price":597.49,"currency_code":"USD","in_stock":true},{"title":"29\" Retracted + 16\" Stroke = 45\" Total - 20774-001","offer_id":50581775122690,"sku":"LEN-20774-001","price":664.99,"currency_code":"USD","in_stock":true},{"title":"33\" Retracted + 16\" Stroke = 49\" Total - 20776-001","offer_id":50581775155458,"sku":"LEN-20776-001","price":664.99,"currency_code":"USD","in_stock":true},{"title":"33\" Retracted + 20\" Stroke = 53\" Total - 20778-001","offer_id":50581775188226,"sku":"LEN-20778-001","price":723.49,"currency_code":"USD","in_stock":true},{"title":"37\" Retracted + 20\" Stroke = 57\" Total - 20780-001","offer_id":50581775220994,"sku":"LEN-20780-001","price":723.49,"currency_code":"USD","in_stock":false},{"title":"37\" Retracted + 24\" Stroke = 61\" Total - 20782-001","offer_id":50581775253762,"sku":"LEN-20782-001","price":785.49,"currency_code":"USD","in_stock":true},{"title":"41\" Retracted + 24\" Stroke = 65\" Total - 20784-001","offer_id":50581775286530,"sku":"LEN-20784-001","price":785.49,"currency_code":"USD","in_stock":true},{"title":"47\" Retracted + 26\" Stroke = 73\" Total - 20786-001","offer_id":50581775319298,"sku":"LEN-20786-001","price":841.29,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/LEN-20760-001__45785.1722512098_bf24ccd8-6f8a-43bd-9025-7ce7691b0e1c.webp?v=1791078827"},{"product_id":"lenco-replacement-hatch-lift-pull-pin","title":"Lenco Trim Tabs Ss Pull Pin For Hatch Lifts (1)","description":"\u003cp\u003eLenco Replacement Stainless Steel Hatch Lift Pull Pin\u003c\/p\u003e\u003cp\u003eThis is a genuine Lenco replacement stainless steel hatch pull pin. Designed for use with all Lenco 12 \u0026amp; 24 Volt hatch lifts.\u003c\/p\u003e","brand":"Lenco Trim Tabs","offers":[{"title":"Default Title","offer_id":50581776072962,"sku":"LEN-60101-001D","price":19.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/LEN-60101-001D__46114.1722505624_ec21cc1d-bbad-4e68-9b93-721ca679491b.jpg?v=1791078832"},{"product_id":"lenco-hatch-lift-slide-bracket","title":"Lenco Trim Tabs S S Slide Brkt-Hatch Lifts","description":"\u003cp\u003eLenco Stainless Steel Hatch Lift Slide Bracket\u003c\/p\u003e\u003cp\u003eStainless steel slide bracket for use with hatch lifts. Includes stainless steel hatch lift attaching hardware.\u003c\/p\u003e\u003cp\u003eSystem Type - Single or Dual Actuator\u003c\/p\u003e\u003cp\u003eCompatibility - Any Boat\u003c\/p\u003e","brand":"Lenco Trim Tabs","offers":[{"title":"Default Title","offer_id":50581776171266,"sku":"LEN-70381-001","price":82.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/LEN-70381-001__76765.1558189391.webp?v=1791078833"},{"product_id":"lewmar-low-medium-profile-hatch-friction-lever","title":"Lewmar Marine LP+MP GYM FRICTION LEVER SPARE","description":"\u003cp\u003eLewmar Low\/Medium Profile Hatch Friction Lever\u003c\/p\u003e\u003cp\u003eThis friction lever is a genuine replacement part for Lewmar low \u0026amp; medium profile hatches.\u003c\/p\u003e\u003cp\u003eKit Includes:\u003c\/p\u003e\u003cp\u003e35001899 Gasket adhesive friction LVR QTY 1\u003c\/p\u003e\u003cp\u003e15801279 Small upper pivot QTY 2\u003c\/p\u003e\u003cp\u003e15801319 Rivet washer QTY 2\u003c\/p\u003e\u003cp\u003e350010190 LP exterior cap gray QTY 1\u003c\/p\u003e\u003cp\u003e350010500 LP round lower pivot gray QTY 1\u003c\/p\u003e\u003cp\u003e38001281 LP lever assy gray QTY 1\u003c\/p\u003e\u003cp\u003eB4100 8x3\/4\" Posi pan HD screw A2 QTY 2\u003c\/p\u003e\u003cp\u003eB4114 8x1\" Posipan AB ST screw A QTY 2\u003c\/p\u003e\u003cp\u003eB4150 AD612SB Tucker pop rivet (4.8) QTY 2\u003c\/p\u003e","brand":"Lewmar Marine","offers":[{"title":"Default Title","offer_id":50581778792706,"sku":"LEW-360917990","price":101.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/LEW-360917990__68713.1722489974.jpg?v=1791078856"},{"product_id":"lewmar-replacement-hinge-caps","title":"Lewmar Marine Hatch Hinge Cover","description":"\u003cp\u003eLewmar Replacement hinge caps - 10 Pack\u003c\/p\u003e\u003cp\u003eLewmar replacement hinge caps fit Lewmar's low and medium profile hatches. Used to protect the adjustable parts of the Lewmar hinge from dirt, dust and the weather.\u003c\/p\u003e\u003cp\u003eFits:\u003c\/p\u003e\u003cp\u003eHatch model: 00\u003c\/p\u003e\u003cp\u003eHatch model: 03\u003c\/p\u003e\u003cp\u003eHatch model: 10\u003c\/p\u003e\u003cp\u003eHatch model: 18\u003c\/p\u003e\u003cp\u003eHatch model: 20\u003c\/p\u003e\u003cp\u003eHatch model: 22\u003c\/p\u003e\u003cp\u003eHatch model: 30\u003c\/p\u003e\u003cp\u003eHatch model: 40\u003c\/p\u003e\u003cp\u003eHatch model: 44\u003c\/p\u003e\u003cp\u003eHatch model: 50\u003c\/p\u003e\u003cp\u003eHatch model: 54\u003c\/p\u003e\u003cp\u003eHatch model: 60\u003c\/p\u003e\u003cp\u003eHatch model: 65\u003c\/p\u003e","brand":"Lewmar Marine","offers":[{"title":"Default Title","offer_id":50581778891010,"sku":"LEW-361027999","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/LEW-361027999-hinge-caps__34726.1739477383_1b0985ab-a327-4a07-bc66-99ec7025a68f.jpg?v=1791078856"},{"product_id":"lewmar-ocean-10-hatch-12-34-x-12-34","title":"Lewmar Marine OCEAN HATCH SZ10 FLANGE BASE","description":"\u003cp\u003eLewmar Ocean 10 Hatch 12-3\/4\" x 12-3\/4\"\u003c\/p\u003e\u003cp\u003eThe Lewmar Ocean series hatch features a classic style that is fitted to countless boats around the world. The rugged construction provides a tight seal to keep the elements out. This boat hatch is constructed with an anodized aluminum frame for excellent corrosion resistance in marine environments. Whether for ventilation or to cool off, the hatch friction levers can hold the lid open in any position up to 95°. Lewmar's Ocean hatch is suitable for CE area 2, including decks, coachroofs, cockpits, and transoms.\u003c\/p\u003e\u003cp\u003eProduct Feature:\u003c\/p\u003e\u003cp\u003eSmoke Gray Acrylic\u003c\/p\u003e\u003cp\u003eAnodized Aluminum Frame\u003c\/p\u003e\u003cp\u003eSuitable for CE Area 2\u003c\/p\u003e\u003cp\u003eFriction Levers\u003c\/p\u003e\u003cp\u003eOcean Series - Flat Base\u003c\/p\u003e\u003cp\u003eNOTE: Flat base hatches cannot be used with Trim kits or Roller shades\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eLength: 12-3\/4\"\u003c\/p\u003e\u003cp\u003eWidth: 12-3\/4\"\u003c\/p\u003e\u003cp\u003eHeight: 1-9\/16\"\u003c\/p\u003e\u003cp\u003eRadii: 2-15\/16\"\u003c\/p\u003e\u003cp\u003eHinge Length: 3\/16\"\u003c\/p\u003e\u003cp\u003eHinge Width: 5-7\/16\"\u003c\/p\u003e\u003cp\u003eCut-Out Length: 10-1\/16\"\u003c\/p\u003e\u003cp\u003eCut-Out Width: 10-1\/16\"\u003c\/p\u003e\u003cp\u003eCur-Out-Radii - 1-9\/16\"\u003c\/p\u003e\u003cp\u003eOcean Series - Flange Base\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eLower Frame: 1\" Flange\u003c\/p\u003e\u003cp\u003eLength: 12-3\/4\"\u003c\/p\u003e\u003cp\u003eWidth: 12-3\/4\"\u003c\/p\u003e\u003cp\u003eHeight: 1-9\/16\"\u003c\/p\u003e\u003cp\u003eRadii: 2-15\/16\"\u003c\/p\u003e\u003cp\u003eHinge Length: 3\/16\"\u003c\/p\u003e\u003cp\u003eHinge Width: 5-7\/16\"\u003c\/p\u003e\u003cp\u003eCut-Out Length: 10-1\/4\"\u003c\/p\u003e\u003cp\u003eCut-Out Width: 10-1\/4\"\u003c\/p\u003e\u003cp\u003eCut-Out Radii: 1-11\/16\"\u003c\/p\u003e\u003cp\u003eMounting Instructions:\u003c\/p\u003e\u003cp\u003eFit to a flat surface with a maximum tolerance of +\/- 1mm\u003c\/p\u003e\u003cp\u003eFastening size at hinge section use M6 \/ 1\/4\"\u003c\/p\u003e\u003cp\u003eLower frame fastening size 5mm CSK No. 10 UNC 2 BA\u003c\/p\u003e\u003cp\u003eClick here for Lewmar Ocean Series Hatch Fitting \u0026amp; Adjustment Instructions\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Lewmar Ocean 10 Hatch 12-3\/4\" x 12-3\/4\" designed for? The Lewmar Ocean 10 Hatch 12-3\/4\" x 12-3\/4\" is a boat hatch suitable for CE Area 2 applications, including decks, coachroofs, cockpits, and transoms. It features a smoke gray acrylic lens, anodized aluminum frame, and friction levers that hold the lid open in any position up to 95°.\u003c\/li\u003e\n\u003cli\u003eWhat are the dimensions of the Lewmar Ocean 10 Hatch? The Lewmar Ocean 10 Hatch measures 12-3\/4\" long by 12-3\/4\" wide and 1-9\/16\" high. The hatch has a 2-15\/16\" radius and a hinge measuring 3\/16\" by 5-7\/16\".\u003c\/li\u003e\n\u003cli\u003eWhat are the cut-out dimensions for the Lewmar Ocean 10 Hatch? The required cut-out depends on the base style. The flat base version has a 10-1\/16\" x 10-1\/16\" cut-out with a 1-9\/16\" cut-out radius. The flange base version has a 10-1\/4\" x 10-1\/4\" cut-out with a 1-11\/16\" cut-out radius.\u003c\/li\u003e\n\u003cli\u003eWhat is the difference between the flat base and flange base versions? The flat base version has a flat lower frame, while the flange base version has a 1\" lower frame flange. Both versions have the same 12-3\/4\" x 12-3\/4\" overall dimensions and 1-9\/16\" height, but their cut-out dimensions differ.\u003c\/li\u003e\n\u003cli\u003eCan the Lewmar Ocean 10 Hatch be used with trim kits or roller shades? No. The supplied product information specifically states that flat base hatches cannot be used with trim kits or roller shades. Verify the base style and installation requirements before selecting accessories.\u003c\/li\u003e\n\u003cli\u003eWhat are the mounting requirements for the Lewmar Ocean 10 Hatch? The hatch should be fitted to a flat surface with a maximum tolerance of +\/- 1mm. The hinge section uses M6 \/ 1\/4\" fasteners, while the lower frame uses 5mm CSK No. 10 UNC 2 BA fasteners.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lewmar Marine","offers":[{"title":"Default Title","offer_id":50581778989314,"sku":"LEW-39610070","price":703.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/Lewmar-39610050-Ocean-Series-Hatch-Size-10-lid-closed__49966.1722511475.webp?v=1791078857"},{"product_id":"lewmar-ocean-series-flat-base-hatch","title":"Lewmar Marine Ocean Series Flat Base Hatch","description":"\u003cp\u003eLewmar Ocean Series Flat Base Hatch\u003c\/p\u003e\u003cp\u003eThis Lewmar Ocean Series Flat Base Hatch features a corrosion-resistant anodized aluminum frame with inset hinges, snag resistant rounded corners and a flat base and it is also composed of rugged construction for ultimate protection against the elements. The friction hinge allows for any open position without the need for support arms while the self-supporting friction levers hold the lid open in any position of up to 95°. This ocean hatch will work on vessel decks, coach roofs, cockpits and transoms as defined by CE Area 2.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eCorrosion-Resistant Anodized Aluminum Frame With Inset Hinges, Snag-Resistant Rounded Corners and Flat Base\u003c\/p\u003e\u003cp\u003eUnique Sealing System\u003c\/p\u003e\u003cp\u003eFull Range Of Spare Parts Available\u003c\/p\u003e\u003cp\u003eInternal\/External Lockable Handle Assemblies\u003c\/p\u003e\u003cp\u003eBonded Acrylic Lens, External Hinges and High-Lower Frame Breakwater\u003c\/p\u003e\u003cp\u003eHatch Vent Position\u003c\/p\u003e\u003cp\u003eSimple Maintenance\u003c\/p\u003e\u003cp\u003eIdeal for Transoms, Cockpits, Coachroofs, and Decks\u003c\/p\u003e\u003cp\u003eShock Resistant Acrylic Lens\u003c\/p\u003e\u003cp\u003eRugged Construction For The Ultimate Protection Against The Elements\u003c\/p\u003e\u003cp\u003eFriction Hinge Allows For Any Open Position Without The Need For Support Arms\u003c\/p\u003e\u003cp\u003eSelf-Supporting - Friction Levers Hold Lid Open In Any Position Up To 95°\u003c\/p\u003e\u003cp\u003eSuitable for Design Category CE Area 2\u003c\/p\u003e\u003cp\u003e3 Year Limited Warranty\u003c\/p\u003e\u003cp\u003eMounting Instructions:\u003c\/p\u003e\u003cp\u003eFit To A Flat Surface With A Maximum Tolerance Of +\/- 1mm.\u003c\/p\u003e\u003cp\u003eFastening Size At Hinge Section Use (M6 \/ 1\/4\").\u003c\/p\u003e\u003cp\u003eFastening Size For Lower Frame Use 5mm CSK Screw No.10 UNC 2 BA.\u003c\/p\u003e\u003cp\u003eFlat Base Hatches Cannot Be Used With Trim Kits Or Roller Shades\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eSize\u003c\/p\u003e\u003cp\u003eAcrylic Colour\u003c\/p\u003e\u003cp\u003eAcrylic Window Thickness\u003c\/p\u003e\u003cp\u003eLower Frame\u003c\/p\u003e\u003cp\u003eHatch Weight\u003c\/p\u003e\u003cp\u003eRadii\u003c\/p\u003e\u003cp\u003eLength\u003c\/p\u003e\u003cp\u003eWidth\u003c\/p\u003e\u003cp\u003eHeight\u003c\/p\u003e\u003cp\u003eHinge Length\u003c\/p\u003e\u003cp\u003eHinge Width\u003c\/p\u003e\u003cp\u003eCut-Out Length Flat\u003c\/p\u003e\u003cp\u003eCut-Out Width Flat\u003c\/p\u003e\u003cp\u003eCut-Out Radii Flat\u003c\/p\u003e\u003cp\u003e10\u003c\/p\u003e\u003cp\u003eSmoke Grey\u003c\/p\u003e\u003cp\u003e3\/8\"\u003c\/p\u003e\u003cp\u003eFlat Base\u003c\/p\u003e\u003cp\u003e5.77 lb\u003c\/p\u003e\u003cp\u003e2-15\/16\"\u003c\/p\u003e\u003cp\u003e12-3\/4\"\u003c\/p\u003e\u003cp\u003e12-3\/4\"\u003c\/p\u003e\u003cp\u003e1-9\/16\"\u003c\/p\u003e\u003cp\u003e3\/16\"\u003c\/p\u003e\u003cp\u003e5-7\/16\"\u003c\/p\u003e\u003cp\u003e10-1\/16\"\u003c\/p\u003e\u003cp\u003e10-1\/16\"\u003c\/p\u003e\u003cp\u003e1-9\/16\"\u003c\/p\u003e\u003cp\u003e60\u003c\/p\u003e\u003cp\u003eSmoke Grey\u003c\/p\u003e\u003cp\u003e1\/2\"\u003c\/p\u003e\u003cp\u003eFlat Base\u003c\/p\u003e\u003cp\u003e17.6 lb\u003c\/p\u003e\u003cp\u003e3\"\u003c\/p\u003e\u003cp\u003e22-5\/8\"\u003c\/p\u003e\u003cp\u003e22-5\/8\"\u003c\/p\u003e\u003cp\u003e1-11\/16\"\u003c\/p\u003e\u003cp\u003e3\/16\"\u003c\/p\u003e\u003cp\u003e14-7\/16\"\u003c\/p\u003e\u003cp\u003e19-3\/4\"\u003c\/p\u003e\u003cp\u003e19-3\/4\"\u003c\/p\u003e\u003cp\u003e1-9\/16\"\u003c\/p\u003e\u003cp\u003e70\u003c\/p\u003e\u003cp\u003eSmoke Grey\u003c\/p\u003e\u003cp\u003e1\/2\"\u003c\/p\u003e\u003cp\u003eFlat Base\u003c\/p\u003e\u003cp\u003e23.8 lb\u003c\/p\u003e\u003cp\u003e3\"\u003c\/p\u003e\u003cp\u003e27-5\/16\"\u003c\/p\u003e\u003cp\u003e27-5\/16\"\u003c\/p\u003e\u003cp\u003e1-11\/16\"\u003c\/p\u003e\u003cp\u003e3\/16\"\u003c\/p\u003e\u003cp\u003e19-3\/16\"\u003c\/p\u003e\u003cp\u003e24-1\/2\"\u003c\/p\u003e\u003cp\u003e24-1\/2\"\u003c\/p\u003e\u003cp\u003e1-9\/16\"\u003c\/p\u003e\u003cp\u003eClick here for Lewmar Hatch Installation Instructions\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Lewmar Ocean Series Flat Base Hatch designed for? The Lewmar Ocean Series Flat Base Hatch is designed for vessel decks, coach roofs, cockpits, and transoms as defined by CE Area 2. It features a corrosion-resistant anodized aluminum frame, rugged construction, and a shock-resistant acrylic lens for protection against the elements.\u003c\/li\u003e\n\u003cli\u003eHow far can the Lewmar Ocean Series Flat Base Hatch open? The Lewmar Ocean Series Flat Base Hatch can be held open in any position up to 95°. Its friction hinge allows the hatch to remain open without support arms, while the self-supporting friction levers hold the lid in the desired position.\u003c\/li\u003e\n\u003cli\u003eWhat sizes are available for the Lewmar Ocean Series Flat Base Hatch? The Lewmar Ocean Series Flat Base Hatch is available in sizes 10, 60, and 70. The size 10 measures 12-3\/4\" x 12-3\/4\", size 60 measures 22-5\/8\" x 22-5\/8\", and size 70 measures 27-5\/16\" x 27-5\/16\".\u003c\/li\u003e\n\u003cli\u003eWhat type of surface is required to install the Lewmar Ocean Series Flat Base Hatch? The Lewmar Ocean Series Flat Base Hatch must be fitted to a flat surface with a maximum tolerance of +\/- 1mm. The mounting instructions specify M6 \/ 1\/4\" fastening at the hinge section and a 5mm CSK Screw No.10 UNC 2 BA for the lower frame.\u003c\/li\u003e\n\u003cli\u003eDoes the Lewmar Ocean Series Flat Base Hatch have a lockable handle? Yes. The Lewmar Ocean Series Flat Base Hatch features internal and external lockable handle assemblies. It also includes a hatch vent position for ventilation.\u003c\/li\u003e\n\u003cli\u003eCan the Lewmar Ocean Series Flat Base Hatch be used with trim kits or roller shades? No. The mounting instructions specifically state that flat base hatches cannot be used with trim kits or roller shades.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lewmar Marine","offers":[{"title":"60","offer_id":50581779087618,"sku":"LEW-39660050","price":1316.49,"currency_code":"USD","in_stock":true},{"title":"70","offer_id":50581779120386,"sku":"LEW-39670050","price":1752.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/866361_source_1545845896_5355b423-e180-4cb6-b49d-3f9c25fbe6a6.jpg?v=1791078858"},{"product_id":"lewmar-ocean-series-flange-base-hatch","title":"Lewmar Marine Ocean Series Flange Base Hatch","description":"\u003cp\u003eLewmar Ocean Series Flange Base Hatch\u003c\/p\u003e\u003cp\u003eThis Lewmar Ocean Series Flange Base Hatch features a shock resistant acrylic lens. With a rugged construction build and attached hinges on the outside the frame, it provides ultimate protection against the elements and prevents leakage. This hatch also features a corrosion-resistant anodized aluminum frame with inset hinges, snag-resistant rounded corners and a flange base. The self supporting friction levers hold the lid open in any position up to 95° while the hatch opens 180° for easy access.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eShock Resistant Acrylic Lens\u003c\/p\u003e\u003cp\u003eRugged Construction For The Ultimate Protection Against The Elements\u003c\/p\u003e\u003cp\u003eFull Range Of Spare Parts Available\u003c\/p\u003e\u003cp\u003eHatch Vent Position\u003c\/p\u003e\u003cp\u003eHinges Are Attached Outside The Frame To Prevent Leakage\u003c\/p\u003e\u003cp\u003eCorrosion-Resistant Anodized Aluminum Frame With Inset Hinges, Snag-Resistant Rounded Corners and Flange Base\u003c\/p\u003e\u003cp\u003eHatch opens 180° for easy access\u003c\/p\u003e\u003cp\u003eUnique Sealing System\u003c\/p\u003e\u003cp\u003eSelf-Supporting – Friction Levers Hold Lid Open In Any Position Up To 95°\u003c\/p\u003e\u003cp\u003eFriction Hinge Allows For Any Open Position Without The Need For Support Arms\u003c\/p\u003e\u003cp\u003eInternal\/External Lockable Handle Assemblies\u003c\/p\u003e\u003cp\u003eSimple Maintenance\u003c\/p\u003e\u003cp\u003eConforms To CE Area 2: Deck, Coach Roof, Cockpit Or Transom Use (Tested To 2 psi)\u003c\/p\u003e\u003cp\u003eFits Other Lewmar Standard Cut-Outs\u003c\/p\u003e\u003cp\u003e3 Year Limited Warranty\u003c\/p\u003e\u003cp\u003eMounting Instructions:\u003c\/p\u003e\u003cp\u003eFit To A Flat Surface With A Maximum Tolerance Of +\/- 1mm.\u003c\/p\u003e\u003cp\u003eFastening Size At Hinge Section Use (M6 \/ 1\/4\").\u003c\/p\u003e\u003cp\u003eFastening Size For Lower Frame Use 5mm CSK Screw No.10 UNC 2 BA.\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eSize\u003c\/p\u003e\u003cp\u003eAcrylic Colour\u003c\/p\u003e\u003cp\u003eAcrylic Window Thickness\u003c\/p\u003e\u003cp\u003eLower Frame\u003c\/p\u003e\u003cp\u003eHatch Weight\u003c\/p\u003e\u003cp\u003eRadii\u003c\/p\u003e\u003cp\u003eLength\u003c\/p\u003e\u003cp\u003eWidth\u003c\/p\u003e\u003cp\u003eHeight\u003c\/p\u003e\u003cp\u003eHinge Length\u003c\/p\u003e\u003cp\u003eHinge Width\u003c\/p\u003e\u003cp\u003eCut-Out Length Flat\u003c\/p\u003e\u003cp\u003eCut-Out Width Flat\u003c\/p\u003e\u003cp\u003eCut-Out Radii\u003c\/p\u003e\u003cp\u003e10\u003c\/p\u003e\u003cp\u003eSmoke Grey\u003c\/p\u003e\u003cp\u003e3\/8\"\u003c\/p\u003e\u003cp\u003e1\" FLange\u003c\/p\u003e\u003cp\u003e5.77 lb\u003c\/p\u003e\u003cp\u003e2-15\/16\"\u003c\/p\u003e\u003cp\u003e12-3\/4\"\u003c\/p\u003e\u003cp\u003e12-3\/4\"\u003c\/p\u003e\u003cp\u003e1-9\/16\"\u003c\/p\u003e\u003cp\u003e3\/16\"\u003c\/p\u003e\u003cp\u003e5-7\/16\"\u003c\/p\u003e\u003cp\u003e10-1\/4\"\u003c\/p\u003e\u003cp\u003e10-1\/4\"\u003c\/p\u003e\u003cp\u003e1-11\/16\"\u003c\/p\u003e\u003cp\u003e40\u003c\/p\u003e\u003cp\u003eSmoke Grey\u003c\/p\u003e\u003cp\u003e3\/8\"\u003c\/p\u003e\u003cp\u003e1\" Flange\u003c\/p\u003e\u003cp\u003e10.5 lb\u003c\/p\u003e\u003cp\u003e2-15\/16\"\u003c\/p\u003e\u003cp\u003e19-1\/8\"\u003c\/p\u003e\u003cp\u003e19-1\/8\"\u003c\/p\u003e\u003cp\u003e1-9\/16\"\u003c\/p\u003e\u003cp\u003e3\/16\"\u003c\/p\u003e\u003cp\u003e11-3\/4\"\u003c\/p\u003e\u003cp\u003e16-9\/16\"\u003c\/p\u003e\u003cp\u003e16-9\/16\"\u003c\/p\u003e\u003cp\u003e1-11\/16\"\u003c\/p\u003e\u003cp\u003e60\u003c\/p\u003e\u003cp\u003eSmoke Grey\u003c\/p\u003e\u003cp\u003e1\/2\"\u003c\/p\u003e\u003cp\u003e1\" Flange\u003c\/p\u003e\u003cp\u003e17.6 lb\u003c\/p\u003e\u003cp\u003e3\"\u003c\/p\u003e\u003cp\u003e22-5\/8\"\u003c\/p\u003e\u003cp\u003e22-5\/8\"\u003c\/p\u003e\u003cp\u003e1-11\/16\"\u003c\/p\u003e\u003cp\u003e3\/16\"\u003c\/p\u003e\u003cp\u003e14-7\/16\"\u003c\/p\u003e\u003cp\u003e19-15\/16\"\u003c\/p\u003e\u003cp\u003e19-15\/16\"\u003c\/p\u003e\u003cp\u003e1-11\/16\"\u003c\/p\u003e\u003cp\u003e70\u003c\/p\u003e\u003cp\u003eSmoke Grey\u003c\/p\u003e\u003cp\u003e1\/2\"\u003c\/p\u003e\u003cp\u003e1\" Flange\u003c\/p\u003e\u003cp\u003e23.8 lb\u003c\/p\u003e\u003cp\u003e3\"\u003c\/p\u003e\u003cp\u003e27-5\/16\"\u003c\/p\u003e\u003cp\u003e27-5\/16\"\u003c\/p\u003e\u003cp\u003e1-11\/16\"\u003c\/p\u003e\u003cp\u003e3\/16\"\u003c\/p\u003e\u003cp\u003e19-3\/16\"\u003c\/p\u003e\u003cp\u003e24-1\/2\"\u003c\/p\u003e\u003cp\u003e24-1\/2\"\u003c\/p\u003e\u003cp\u003e1-11\/16\"\u003c\/p\u003e\u003cp\u003eClick here to download Lewmar Hatch Installation Instructions\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Lewmar Ocean Series Flange Base Hatch designed for? The Lewmar Ocean Series Flange Base Hatch is designed for deck, coach roof, cockpit, or transom use. It features a corrosion-resistant anodized aluminum frame, shock-resistant acrylic lens, and rugged construction. The hatch conforms to CE Area 2 requirements and opens 180° for easy access.\u003c\/li\u003e\n\u003cli\u003eHow far does the Lewmar Ocean Series Flange Base Hatch open? The Lewmar Ocean Series Flange Base Hatch opens 180° for easy access. Its self-supporting friction levers hold the lid open in any position up to 95°, while the friction hinge allows the hatch to remain open without support arms.\u003c\/li\u003e\n\u003cli\u003eWhat features help protect the Lewmar Ocean Series Flange Base Hatch from water and the elements? The hatch has a corrosion-resistant anodized aluminum frame, a unique sealing system, and hinges attached outside the frame to help prevent leakage. Its rugged construction and shock-resistant acrylic lens provide protection against the elements.\u003c\/li\u003e\n\u003cli\u003eWhat mounting requirements apply to the Lewmar Ocean Series Flange Base Hatch? The Lewmar Ocean Series Flange Base Hatch should be fitted to a flat surface with a maximum tolerance of +\/- 1mm. The hinge section uses M6 \/ 1\/4\" fasteners, while the lower frame uses 5mm CSK Screw No.10 UNC 2 BA.\u003c\/li\u003e\n\u003cli\u003eWhat sizes are available for the Lewmar Ocean Series Flange Base Hatch? The Lewmar Ocean Series Flange Base Hatch is available in sizes 10, 40, 60, and 70. Depending on the size, the hatch has a 3\/8\" or 1\/2\" smoke grey acrylic lens and a 1\" flange base. Cut-out dimensions vary by size, so verify the required dimensions before installation…\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lewmar Marine","offers":[{"title":"60","offer_id":50581779218690,"sku":"LEW-39660070","price":1319.49,"currency_code":"USD","in_stock":true},{"title":"70","offer_id":50581779251458,"sku":"LEW-39670070","price":1762.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/866363_source_1545859805.jpg?v=1791078861"},{"product_id":"lewmar-low-profile-deck-hatch","title":"Lewmar Marine Low Profile Deck Hatch","description":"\u003cp\u003eLewmar Low Profile Deck Hatch\u003c\/p\u003e\u003cp\u003eThis Lewmar Low Profile Deck Hatch features smaller ventilation hatches suitable for any deck location on sailboats and larger sizes that can be used as foredeck hatches on smaller to mid-size yachts. With a low frame section and 8mm acrylic windows, this hatch is available in multiple sizes making it a good choice for installation on a variety of boats. The lockable internal and external handles provide added security. Composed of corrosion-resistant clear anodized aluminum, this deck hatch features self-supporting friction levers that will hold the lid open in any position up to 95°.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eLow Profile Hatches Open Up To 180° (Round Hatches Open To 170°)\u003c\/p\u003e\u003cp\u003eOutside Handles Allow Hatch To Be Opened From On Deck If Not Locked\u003c\/p\u003e\u003cp\u003eFull Range Of Spare Parts Available\u003c\/p\u003e\u003cp\u003eCorrosion-Resistant Clear Anodized Aluminum Frame With Flange Bases, Inset Hinges and Snag-Resistant Rounded Edges\u003c\/p\u003e\u003cp\u003eHinges Flush With Upper Frame\u003c\/p\u003e\u003cp\u003eCurved Upper Frame Section For Strength and Modern Styling\u003c\/p\u003e\u003cp\u003eSelf-Supporting - Friction Levers Hold Lid Open In Any Position Up To 95°\u003c\/p\u003e\u003cp\u003eUnique Sealing System Allows Easy Replacement Of Acrylic Lens\u003c\/p\u003e\u003cp\u003eLocking Handles With Exterior Lever, Vent Position\u003c\/p\u003e\u003cp\u003eImproved Stronger Lower Frame Design With Higher Breakwater\u003c\/p\u003e\u003cp\u003eCE Approved For Design Category A \/ Area 2A*\u003c\/p\u003e\u003cp\u003e3 Year Warranty\u003c\/p\u003e\u003cp\u003eMounting Instructions:\u003c\/p\u003e\u003cp\u003eFit to a flat surface with a maximum tolerance of +\/- 1mm.\u003c\/p\u003e\u003cp\u003eFastening size at hinge section use (M6 \/ 1\/4\").\u003c\/p\u003e\u003cp\u003eFastening size for lower frame use 5mm CSK screw No.10 UNC 2 BA.\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eSize\u003c\/p\u003e\u003cp\u003eLower Frame\u003c\/p\u003e\u003cp\u003eAcrylic Colour\u003c\/p\u003e\u003cp\u003eAcrylic Window Thickness\u003c\/p\u003e\u003cp\u003eHatch Weight\u003c\/p\u003e\u003cp\u003eLength\u003c\/p\u003e\u003cp\u003eWidth\u003c\/p\u003e\u003cp\u003eHeight\u003c\/p\u003e\u003cp\u003eRadii\u003c\/p\u003e\u003cp\u003eCut-Out Length\u003c\/p\u003e\u003cp\u003eCut-Out Width\u003c\/p\u003e\u003cp\u003eCut-Out Radii\u003c\/p\u003e\u003cp\u003e10\u003c\/p\u003e\u003cp\u003e9\/16\"\u003c\/p\u003e\u003cp\u003eSmoke Grey\u003c\/p\u003e\u003cp\u003e5\/16\"\u003c\/p\u003e\u003cp\u003e4.9 lb\u003c\/p\u003e\u003cp\u003e13\"\u003c\/p\u003e\u003cp\u003e13\"\u003c\/p\u003e\u003cp\u003e1\"\u003c\/p\u003e\u003cp\u003e2-7\/8\"\u003c\/p\u003e\u003cp\u003e10-1\/4\"\u003c\/p\u003e\u003cp\u003e10-1\/4\"\u003c\/p\u003e\u003cp\u003e1-11\/16\"\u003c\/p\u003e\u003cp\u003e30\u003c\/p\u003e\u003cp\u003e9\/16\"\u003c\/p\u003e\u003cp\u003eSmoke Grey\u003c\/p\u003e\u003cp\u003e5\/16\"\u003c\/p\u003e\u003cp\u003e8.6 lb\u003c\/p\u003e\u003cp\u003e15-5\/8\"\u003c\/p\u003e\u003cp\u003e20-3\/4\"\u003c\/p\u003e\u003cp\u003e1\"\u003c\/p\u003e\u003cp\u003e2-7\/8\"\u003c\/p\u003e\u003cp\u003e12-7\/8\"\u003c\/p\u003e\u003cp\u003e18\"\u003c\/p\u003e\u003cp\u003e1-11\/16\"\u003c\/p\u003e\u003cp\u003e40\u003c\/p\u003e\u003cp\u003e9\/16\"\u003c\/p\u003e\u003cp\u003eSmoke Grey\u003c\/p\u003e\u003cp\u003e5\/16\"\u003c\/p\u003e\u003cp\u003e10.1 lb\u003c\/p\u003e\u003cp\u003e19-5\/16\"\u003c\/p\u003e\u003cp\u003e19-5\/16\"\u003c\/p\u003e\u003cp\u003e1\"\u003c\/p\u003e\u003cp\u003e2-7\/8\"\u003c\/p\u003e\u003cp\u003e16-9\/16\"\u003c\/p\u003e\u003cp\u003e16-9\/16\"\u003c\/p\u003e\u003cp\u003e1-11\/16\"\u003c\/p\u003e\u003cp\u003e44\u003c\/p\u003e\u003cp\u003e9\/16\"\u003c\/p\u003e\u003cp\u003eSmoke Grey\u003c\/p\u003e\u003cp\u003e5\/16\"\u003c\/p\u003e\u003cp\u003e10.6 lb\u003c\/p\u003e\u003cp\u003e20-3\/16\"\u003c\/p\u003e\u003cp\u003e20-3\/16\"\u003c\/p\u003e\u003cp\u003e1\"\u003c\/p\u003e\u003cp\u003e2-7\/8\"\u003c\/p\u003e\u003cp\u003e17-3\/8\"\u003c\/p\u003e\u003cp\u003e17-3\/8\"\u003c\/p\u003e\u003cp\u003e1-11\/16\"\u003c\/p\u003e\u003cp\u003e54\u003c\/p\u003e\u003cp\u003e9\/16\"\u003c\/p\u003e\u003cp\u003eSmoke Grey\u003c\/p\u003e\u003cp\u003e5\/16\"\u003c\/p\u003e\u003cp\u003e10.8 lb\u003c\/p\u003e\u003cp\u003e18-3\/16\"\u003c\/p\u003e\u003cp\u003e22-11\/16\"\u003c\/p\u003e\u003cp\u003e1\"\u003c\/p\u003e\u003cp\u003e2-7\/8\"\u003c\/p\u003e\u003cp\u003e15-7\/16\"\u003c\/p\u003e\u003cp\u003e19-15\/16\"\u003c\/p\u003e\u003cp\u003e1-11\/16\"\u003c\/p\u003e\u003cp\u003e60\u003c\/p\u003e\u003cp\u003e9\/16\"\u003c\/p\u003e\u003cp\u003eSmoke Grey\u003c\/p\u003e\u003cp\u003e5\/16\"\u003c\/p\u003e\u003cp\u003e14.1 lb\u003c\/p\u003e\u003cp\u003e22-11\/16\"\u003c\/p\u003e\u003cp\u003e22-11\/16\"\u003c\/p\u003e\u003cp\u003e1\"\u003c\/p\u003e\u003cp\u003e2-7\/8\"\u003c\/p\u003e\u003cp\u003e19-15\/16\"\u003c\/p\u003e\u003cp\u003e19-15\/16\"\u003c\/p\u003e\u003cp\u003e1-11\/16\"\u003c\/p\u003e\u003cp\u003eClick here to download Lewmar Hatch Installation Instructions\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Lewmar Low Profile Deck Hatch used for? The Lewmar Low Profile Deck Hatch is designed for deck locations on sailboats, with larger sizes suitable for foredeck use on smaller to mid-size yachts. It features an 8mm acrylic window, corrosion-resistant clear anodized aluminum frame, and self-supporting friction levers.\u003c\/li\u003e\n\u003cli\u003eHow far does the Lewmar Low Profile Deck Hatch open? The Lewmar Low Profile Deck Hatch opens up to 180°, while the round hatch versions open up to 170°. Its self-supporting friction levers hold the lid open in any position up to 95°.\u003c\/li\u003e\n\u003cli\u003eDoes the Lewmar Low Profile Deck Hatch have locking handles? Yes. The Lewmar Low Profile Deck Hatch features locking handles with an exterior lever and vent position. The outside handles also allow the hatch to be opened from on deck when it is not locked.\u003c\/li\u003e\n\u003cli\u003eWhat is the Lewmar Low Profile Deck Hatch made from? The hatch features a corrosion-resistant clear anodized aluminum frame with flange bases, inset hinges, flush-mounted hinges, and rounded snag-resistant edges. It also has an 8mm acrylic window with a sealing system designed to allow the acrylic lens to be replaced easily.\u003c\/li\u003e\n\u003cli\u003eWhat are the mounting requirements for the Lewmar Low Profile Deck Hatch? The Lewmar Low Profile Deck Hatch should be fitted to a flat surface with a maximum tolerance of +\/- 1mm. The hinge section uses M6 or 1\/4\" fastening, while the lower frame uses a 5mm CSK screw No.10 UNC 2 BA. Verify the selected hatch's cut-out dimensions before installation. What sizes are available for the …\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lewmar Marine","offers":[{"title":"10","offer_id":50581779415298,"sku":"LEW-39910030","price":520.99,"currency_code":"USD","in_stock":true},{"title":"30","offer_id":50581779448066,"sku":"LEW-39930030","price":699.49,"currency_code":"USD","in_stock":true},{"title":"40","offer_id":50581779480834,"sku":"LEW-39940030","price":742.49,"currency_code":"USD","in_stock":true},{"title":"44","offer_id":50581779513602,"sku":"LEW-39944030","price":776.49,"currency_code":"USD","in_stock":false},{"title":"54","offer_id":50581779546370,"sku":"LEW-39954030","price":842.99,"currency_code":"USD","in_stock":true},{"title":"60","offer_id":50581779579138,"sku":"LEW-39960030","price":893.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/866365_source_1545925536_d0cb82d5-733d-4e23-8c72-2ceba501a9dd.jpg?v=1791078861"},{"product_id":"lewmar-medium-profile-hatch","title":"Lewmar Marine Medium Profile Hatch","description":"\u003cp\u003eLewmar Medium Profile Hatch\u003c\/p\u003e\u003cp\u003eThis Lewmar Medium Profile Hatch features thick acrylic frame sections allowing for greater strength and durability. The internal and external handles provide added security while the self-supporting friction levers hold the lid open in any position up to 95°. With a corrosion-resistant clear anodized aluminum frame with flange bases, inset hinges and snag-resistant rounded edges, this hatch is ideal for larger offshore yachts. The unique sealing system allows for easy replacement of the acrylic lens.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eCurved Upper Frame Section For Strength and Modern Styling\u003c\/p\u003e\u003cp\u003eHatch With Thicker Acrylic and Deeper Frame Sections (Compared To Low Profile Hatch) For Greater Strength and Durability\u003c\/p\u003e\u003cp\u003eIdeal As Foredeck Hatch On Larger Offshore Yachts\u003c\/p\u003e\u003cp\u003eCorrosion-Resistant Clear Anodized Aluminum Frame With Flange Bases, Inset Hinges and Snag-Resistant Rounded Edges\u003c\/p\u003e\u003cp\u003eLocking Handles With Exterior Lever, Vent Position\u003c\/p\u003e\u003cp\u003eOutside Handles Allow Hatch To Be Opened From On Deck If Not Locked\u003c\/p\u003e\u003cp\u003eSelf-Supporting - Friction Levers Hold Lid Open In Any Position Up To 95°\u003c\/p\u003e\u003cp\u003eFull Range Of Spare Parts Available\u003c\/p\u003e\u003cp\u003eUnique Sealing System Allows Easy Replacement Of Acrylic Lens\u003c\/p\u003e\u003cp\u003eCE Approved For Design Category A \/ Area 2A\u003c\/p\u003e\u003cp\u003e3 Year Warranty\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eSize\u003c\/p\u003e\u003cp\u003eLower Frame\u003c\/p\u003e\u003cp\u003eAcrylic Colour\u003c\/p\u003e\u003cp\u003eAcrylic Window Thickness\u003c\/p\u003e\u003cp\u003eHatch Weight\u003c\/p\u003e\u003cp\u003eLength\u003c\/p\u003e\u003cp\u003eWidth\u003c\/p\u003e\u003cp\u003eHeight\u003c\/p\u003e\u003cp\u003eRadii\u003c\/p\u003e\u003cp\u003eCut-Out Length\u003c\/p\u003e\u003cp\u003eCut-Out Width\u003c\/p\u003e\u003cp\u003eCut-Out Radii\u003c\/p\u003e\u003cp\u003e60\u003c\/p\u003e\u003cp\u003e9\/16\"\u003c\/p\u003e\u003cp\u003eSmoke Grey\u003c\/p\u003e\u003cp\u003e1\/2\"\u003c\/p\u003e\u003cp\u003e17.2 lb\u003c\/p\u003e\u003cp\u003e22-3\/4\"\u003c\/p\u003e\u003cp\u003e22-3\/4\"\u003c\/p\u003e\u003cp\u003e1-1\/4\"\u003c\/p\u003e\u003cp\u003e2-7\/8\"\u003c\/p\u003e\u003cp\u003e19-15\/16\"\u003c\/p\u003e\u003cp\u003e19-15\/16\"\u003c\/p\u003e\u003cp\u003e1-11\/16\"\u003c\/p\u003e\u003cp\u003e70\u003c\/p\u003e\u003cp\u003e9\/16\"\u003c\/p\u003e\u003cp\u003eSmoke Grey\u003c\/p\u003e\u003cp\u003e1\/2\"\u003c\/p\u003e\u003cp\u003e23.4 lb\u003c\/p\u003e\u003cp\u003e27-1\/2\"\u003c\/p\u003e\u003cp\u003e27-1\/2\"\u003c\/p\u003e\u003cp\u003e1-1\/4\"\u003c\/p\u003e\u003cp\u003e2-7\/8\"\u003c\/p\u003e\u003cp\u003e24-11\/16\"\u003c\/p\u003e\u003cp\u003e24-11\/16\"\u003c\/p\u003e\u003cp\u003e1-11\/16\"\u003c\/p\u003e\u003cp\u003eClick here to download Lewmar Hatch Installation Instructions\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Lewmar Medium Profile Hatch designed for? The Lewmar Medium Profile Hatch is designed for marine applications where strength and durability are important. It is ideal as a foredeck hatch on larger offshore yachts and features a corrosion-resistant clear anodized aluminum frame, thick acrylic, inset hinges, and snag-resistant rounded edges.\u003c\/li\u003e\n\u003cli\u003eHow far can the Lewmar Medium Profile Hatch be opened? The hatch uses self-supporting friction levers that hold the lid open in any position up to 95°. This allows the opening angle to be adjusted within that range without requiring the lid to remain fully open.\u003c\/li\u003e\n\u003cli\u003eWhat features provide security and ventilation on the Lewmar Medium Profile Hatch? The hatch has locking handles with an exterior lever and a vent position. When the hatch is not locked, the outside handles also allow it to be opened from on deck. These features provide access and ventilation options while supporting the hatch's security functions.\u003c\/li\u003e\n\u003cli\u003eWhat are the available sizes and specifications for the Lewmar Medium Profile Hatch? The Lewmar Medium Profile Hatch is available in sizes 60 and 70. Both have smoke grey acrylic with a 1\/2-inch acrylic window thickness and a 1-1\/4-inch height. Size 60 weighs 17.2 lb, while size 70 weighs 23.4 lb. The two sizes also have different overall and cut-out dimensions.\u003c\/li\u003e\n\u003cli\u003eCan the acrylic lens be replaced on the Lewmar Medium Profile Hatch? Yes. The Lewmar Medium Profile Hatch uses a unique sealing system that allows the acrylic lens to be replaced easily. The hatch also has a full range of spare parts available, which supports maintenance and replacement of components.\u003c\/li\u003e\n\u003cli\u003eWhat should I verify before installing a Lewmar Medium Profile Hatch? Verify the hatch size and required cut-out dimensions before installation. Size 60 requires a 19-15\/16-inch cut-out length and width, while size 70 requires a 24-11\/16-inch cut-out length and width. Both have a 1-11\/16-inch cut-out radius and a 9\/16-inch lower frame.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lewmar Marine","offers":[{"title":"60","offer_id":50581779808514,"sku":"LEW-39960020","price":987.99,"currency_code":"USD","in_stock":false},{"title":"70","offer_id":50581779841282,"sku":"LEW-39970020","price":1379.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/LEW-39960020__39558.1722499175.webp?v=1791078862"},{"product_id":"taylor-made-windshield-or-hatch-turn-latches","title":"Taylor Made Products Turn Latch","description":"\u003cp\u003eWindshield Or Hatch Turn Latches A simple twist latch for securing walk-thru windshields or other hatch openings. Black thermoplastic complete with self-tapping screws. Packaged in pairs.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":50581882962178,"sku":"NAT-1162","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/nat-1162_lg__00628.1558115992.jpg?v=1791079610"},{"product_id":"hatch-or-windshield-friction-catch","title":"Taylor Made Products Door Catch","description":"\u003cp\u003eHatch or Windshield Friction Catch For walk-thru windshields and other doors. Holds door firmly in place against vibration and motion. Black thermoplastic, consisting of ball stud, catch, and screws. Punched to accommodate hidden fasteners or external angles.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":50581883715842,"sku":"NAT-1163","price":8.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/nat-1163_lg__01550.1558116034_a2f57460-92d5-47b3-ab00-286f5cab788e.jpg?v=1791079610"},{"product_id":"taylor-made-hatch-window-door-utility-latch","title":"Taylor Made Products Utility Latch","description":"\u003cp\u003eHatch-Window-Door Utility Latch\u003c\/p\u003e\u003cp\u003eEasy to install latch for hatches, windows, doors and other applications. Rugged nylon complete with mounting screws.\u003c\/p\u003e\u003cp\u003eSold in pairs.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":50581894201602,"sku":"NAT-551","price":33.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/nat-551_lg__67522.1558117638.jpg?v=1791079695"},{"product_id":"perko-hatch-fastener-windshield-keeper","title":"Perko Marine HATCH FASTENER","description":"\u003cp\u003ePerko Hatch Fastener\/ Windshield Keeper\u003c\/p\u003e\u003cp\u003eThis Perko hatch fastener is also a windshield keeper. It is chrome plated brass and zinc alloy, with a black polymer handle.\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eBase dimensions: 1-1\/2\" x 5\/8\"\u003c\/p\u003e\u003cp\u003eScrew Size: #8\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Perko Hatch Fastener\/ Windshield Keeper used for? The Perko Hatch Fastener\/ Windshield Keeper functions as both a hatch fastener and a windshield keeper. It features a black polymer handle and is constructed with chrome plated brass and zinc alloy.\u003c\/li\u003e\n\u003cli\u003eWhat are the dimensions of the Perko Hatch Fastener\/ Windshield Keeper? The Perko Hatch Fastener\/ Windshield Keeper has a base measuring 1-1\/2\" x 5\/8\". It uses a #8 screw size.\u003c\/li\u003e\n\u003cli\u003eWhat materials is the Perko Hatch Fastener\/ Windshield Keeper made from? The Perko Hatch Fastener\/ Windshield Keeper is made from chrome plated brass and zinc alloy, with a black polymer handle.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Perko Marine","offers":[{"title":"Default Title","offer_id":50581934899458,"sku":"PKO-0769DP0CHR","price":92.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/PKO-0769DP0CHR__70696.1722346740_735ca002-595b-4c4c-8ba7-5e9e8dc68c8b.webp?v=1791080017"},{"product_id":"perko-flush-hatch-lift-handle-chrome-zinc-alloy","title":"Perko Marine Flush Hatch Lift Handle","description":"\u003cp\u003eFlush Hatch Lift Handle. Chrome Plated Zinc Alloy. Faceplate Dimensions 3\" x 2-1\/4\"\u003c\/p\u003e","brand":"Perko Marine","offers":[{"title":"Default Title","offer_id":50581940207874,"sku":"PKO-1220DPCHR","price":34.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/PKO-1220DPCHR_lg__30194.1558117517_7ac3e756-441d-4bde-a632-3e6de04754f5.jpg?v=1791080056"},{"product_id":"sea-dog-chrome-plated-hatch-hinge","title":"Sea Dog Marine Hatch Hinge Chrome Brass","description":"\u003cp\u003eSea Dog Chrome Plated Hatch Hinge\u003c\/p\u003e\u003cp\u003eSea Dog heavy duty hatch hinge features a removable clevis pin with split ring for easy separation. Hinge design includes stop to hold hatch in upright position when open. This hatch hinge is constructed of chrome-plated forged brass for corrosion resistance and durability.\u003c\/p\u003e\u003cp\u003eForged Brass Chrome Plated\u003c\/p\u003e\u003cp\u003eEasily installs with (8) #10 FH Fasteners (not included)\u003c\/p\u003e\u003cp\u003eSold individually\u003c\/p\u003e\u003cp\u003eDimensions:\u003c\/p\u003e\u003cp\u003eA: 2-1\/2\"\u003c\/p\u003e\u003cp\u003eB: 1-1\/4\"\u003c\/p\u003e\u003cp\u003eC; 3\"\u003c\/p\u003e\u003cp\u003eD: 1\/4\"\u003c\/p\u003e","brand":"Sea Dog Marine","offers":[{"title":"Default Title","offer_id":50582044508418,"sku":"S-D-204280-1","price":52.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/S-D-204280-1_2__46953.1789761452.jpg?v=1791080348"},{"product_id":"sea-dog-stainless-steel-hatch-hinge","title":"Sea Dog Marine Hatch Hingess","description":"\u003cp\u003eSea-Dog Stainless Steel Hatch Hinge\u003c\/p\u003e\u003cp\u003eSea Dog heavy duty hatch hinges feature a removable clevis pin with split ring for easy separation. Hinge design includes stop to hold hatch in an upright position when open. These hinges are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Easily installs with (8) #10 FH fasteners (not included).\u003c\/p\u003e\u003cp\u003eInvestment cast 316 stainless steel\u003c\/p\u003e\u003cp\u003eEasy to install\u003c\/p\u003e\u003cp\u003eSold individually\u003c\/p\u003e\u003cp\u003eDimensions:\u003c\/p\u003e\u003cp\u003eA: 2-5\/8\"\u003c\/p\u003e\u003cp\u003eB: 1-1\/4\"\u003c\/p\u003e\u003cp\u003eC: 2-7\/8\"\u003c\/p\u003e\u003cp\u003eD: 1\/4\"\u003c\/p\u003e","brand":"Sea Dog Marine","offers":[{"title":"Default Title","offer_id":50582045327618,"sku":"S-D-205280-1","price":47.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/S-D-205280-1_lg__03060.1722504773_39c5686b-a850-4db3-8c92-50be1d9b811e.webp?v=1791080350"},{"product_id":"sea-dog-stainless-steel-spring-loaded-hatch-pull","title":"Sea Dog Marine S S Spring Loaded Hatch Pull","description":"\u003cp\u003eA               B             C             D           E\u003c\/p\u003e\u003cp\u003e2-9\/16”   2-3\/16”     7\/16”      1\/32”     1-1\/2”\u003c\/p\u003e\u003cp\u003eFastener #8 FH\u003c\/p\u003e","brand":"Sea Dog Marine","offers":[{"title":"Default Title","offer_id":50582050275586,"sku":"S-D-221810-1","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/s-d-221810-1_lg__44665.1558179454.jpg?v=1791080365"},{"product_id":"sea-dog-spring-loaded-flush-hatch-pull-stainless-steel","title":"Sea Dog Marine S.S. Spring Loaded Hatch Pull","description":"\u003cp\u003eSea Dog Spring Loaded Flush Hatch Pull - Stainless Steel\u003c\/p\u003e\u003cp\u003eThis Sea Dog hatch pull is constructed of corrosion resistant 304 stamped stainless steel and are ideal for use on hatches and lazarettes. Spring loaded handle prevents rattling and stays flush against the base, even in vertical applications.\u003c\/p\u003e\u003cp\u003eStamped 304 Stainless Steel Construction\u003c\/p\u003e\u003cp\u003eInstalls with (4) #8 FH fasteners (not included)\u003c\/p\u003e\u003cp\u003eSold Individually\u003c\/p\u003e\u003cp\u003eDimensions:\u003c\/p\u003e\u003cp\u003eA: 3\"\u003c\/p\u003e\u003cp\u003eB: 2-1\/4\"\u003c\/p\u003e\u003cp\u003eC: 5\/16\"\u003c\/p\u003e\u003cp\u003eD: 1\/32\"\u003c\/p\u003e\u003cp\u003eE: 1-5\/16\"\u003c\/p\u003e","brand":"Sea Dog Marine","offers":[{"title":"Default Title","offer_id":50582051160322,"sku":"S-D-221820","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/221820__17585.1558171590_f7348f45-d92a-44f0-90f9-7ef75814fda1.jpg?v=1791080366"},{"product_id":"sea-dog-stainless-steel-hatch-cover-pull","title":"Sea Dog Marine Hatch Cover Pull","description":"\u003cp\u003eSea-Dog Stainless Steel Hatch Cover Pull\u003c\/p\u003e\u003cp\u003eHighly corrosion resistant, this Sea Dog hatch cover pull provides a simple and convenient way to open the hatches in your boat. Easy to install, this hatch pull features a stainless steel washer for a tight and secure fit. Commonly used on deck mounted access hatches, this hatch cover pull not only looks attractive, but is durable for use in harsh marine conditions.\u003c\/p\u003e\u003cp\u003eStamped 304 Stainless\u003c\/p\u003e\u003cp\u003eRequires a 3\/16\" Hole\u003c\/p\u003e\u003cp\u003eFlange pull is 1-1\/4\" in diameter x 1\/8\" thick\u003c\/p\u003e\u003cp\u003eDimensions:\u003c\/p\u003e\u003cp\u003eA: 1-15\/16\"\u003c\/p\u003e\u003cp\u003eB: 1-1\/4\"\u003c\/p\u003e\u003cp\u003eC: 1\/8\"\u003c\/p\u003e\u003cp\u003eD: 3\/16\"\u003c\/p\u003e","brand":"Sea Dog Marine","offers":[{"title":"Default Title","offer_id":50582052012290,"sku":"S-D-221840-1","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/S-D-221840-1_lg__91507.1558117601_13d6e00d-5b11-4b4a-95fc-3bcfcfb766ca.jpg?v=1791080367"},{"product_id":"sea-dog-stainless-steel-hatch-ring-pull","title":"Sea Dog Marine Hatch Ring Pull","description":"\u003cp\u003eSea Dog Stainless Steel Hatch Ring Pull\u003c\/p\u003e\u003cp\u003eSea Dog Hatch Ring Pull constructed from Invest Cast 316 Stainless Steel.\u003c\/p\u003e\u003cp\u003eDimensions:\u003c\/p\u003e\u003cp\u003eA - 1-15\/16\"\u003c\/p\u003e\u003cp\u003eB - 1-9\/16\"\u003c\/p\u003e\u003cp\u003eC - 3\/8\"\u003c\/p\u003e\u003cp\u003eD - 1\/8\"\u003c\/p\u003e\u003cp\u003eE - 1-1\/16\"\u003c\/p\u003e","brand":"Sea Dog Marine","offers":[{"title":"Default Title","offer_id":50582052143362,"sku":"S-D-221850-1","price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/S-D-221850__21452.1722497964.jpg?v=1791080369"},{"product_id":"sea-dog-stainless-steel-flush-hatch-pull","title":"Sea Dog Marine Flush Hatch Pull","description":"\u003cp\u003eSea Dog Stainless Steel Flush Hatch Pull\u003c\/p\u003e\u003cp\u003eConstructed of corrosion resistant investment cast 316 stainless steel, these Sea Dog Hatch Pulls are ideal for use on doors, hatches and dock boxes. Handle pivots out to open hatches and lays flush when not in use for a clean appearance. Installs with (4) #8 FH fasteners (not included).\u003c\/p\u003e\u003cp\u003eDimensions:\u003c\/p\u003e\u003cp\u003eA - 3\"\u003c\/p\u003e\u003cp\u003eB - 2-1\/8\"\u003c\/p\u003e\u003cp\u003eC - 5\/16\"\u003c\/p\u003e\u003cp\u003eD - 1\/16\"\u003c\/p\u003e\u003cp\u003eE - 1-1\/4\"\u003c\/p\u003e","brand":"Sea Dog Marine","offers":[{"title":"Default Title","offer_id":50582052569346,"sku":"S-D-221860-1","price":38.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/S-D-221860__15726.1722351385_b164d980-8e84-43e8-a4af-af6232a46c3d.jpg?v=1791080370"},{"product_id":"sea-dog-marine-stainless-hatch-adjuster","title":"Sea Dog Marine Sea-Dog Marine Stainless Hatch Adjuster","description":"\u003cp\u003eSea-Dog Stainless Steel Hatch Adjuster\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eFormed 304 Stainless\/Nylon\u003c\/p\u003e\u003cp\u003ePart Number\u003c\/p\u003e\u003cp\u003eA\u003c\/p\u003e\u003cp\u003eB\u003c\/p\u003e\u003cp\u003eC\u003c\/p\u003e\u003cp\u003eD\u003c\/p\u003e\u003cp\u003e321291-1\u003c\/p\u003e\u003cp\u003e11-1\/8\"\u003c\/p\u003e\u003cp\u003e17-7\/8\"\u003c\/p\u003e\u003cp\u003e1-3\/8\"\u003c\/p\u003e\u003cp\u003e1-3\/16\"\u003c\/p\u003e\u003cp\u003e321292-1\u003c\/p\u003e\u003cp\u003e14-3\/16\"\u003c\/p\u003e\u003cp\u003e24-3\/16\"\u003c\/p\u003e\u003cp\u003e1-3\/8\"\u003c\/p\u003e\u003cp\u003e1-3\/16\"\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Sea-Dog Stainless Steel Hatch Adjuster made from? The Sea-Dog Stainless Steel Hatch Adjuster is constructed from formed 304 stainless steel and nylon.\u003c\/li\u003e\n\u003cli\u003eWhat are the available Sea-Dog Stainless Steel Hatch Adjuster part numbers? The Sea-Dog Stainless Steel Hatch Adjuster is available in part numbers 321291-1 and 321292-1. The two versions have different A and B dimensions.\u003c\/li\u003e\n\u003cli\u003eWhat are the dimensions of Sea-Dog Stainless Steel Hatch Adjuster 321291-1? Part number 321291-1 has an A dimension of 11-1\/8\", a B dimension of 17-7\/8\", a C dimension of 1-3\/8\", and a D dimension of 1-3\/16\".\u003c\/li\u003e\n\u003cli\u003eWhat are the dimensions of Sea-Dog Stainless Steel Hatch Adjuster 321292-1? Part number 321292-1 has an A dimension of 14-3\/16\", a B dimension of 24-3\/16\", a C dimension of 1-3\/8\", and a D dimension of 1-3\/16\".\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sea Dog Marine","offers":[{"title":"11-18","offer_id":50582087827714,"sku":"S-D-321291-1","price":54.99,"currency_code":"USD","in_stock":true},{"title":"14-24","offer_id":50582087860482,"sku":"S-D-321292-1","price":50.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/S-D-321291-1.1_2__62444.1789758869.jpg?v=1791080451"},{"product_id":"sea-dog-stainless-steel-nylon-hatch-adjuster","title":"Sea Dog Marine Hatch Adjuster 12-18","description":"\u003cp\u003eSea-Dog Stainless\/Nylon Hatch Adjuster\u003c\/p\u003e\u003cp\u003eConstructed of corrosion resistant formed 304 stainless steel, these hatch adjusters feature a simple twist knob to lock in desired position. UV resistant injection molded nylon mounting pads and knob. Great for use on dock box lids, hatches, windshields, ect.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eFormed 304 Stainless\u003c\/p\u003e\u003cp\u003eInjection Molded Nylon\u003c\/p\u003e\u003cp\u003eEasy Grip Handle\u003c\/p\u003e\u003cp\u003eExtends from 12\" to 18\"\u003c\/p\u003e\u003cp\u003ePart Number\u003c\/p\u003e\u003cp\u003eA\u003c\/p\u003e\u003cp\u003eB\u003c\/p\u003e\u003cp\u003eC\u003c\/p\u003e\u003cp\u003eD\u003c\/p\u003e\u003cp\u003e321295-1\u003c\/p\u003e\u003cp\u003e11-15\/16\"\u003c\/p\u003e\u003cp\u003e17-7\/8\"\u003c\/p\u003e\u003cp\u003e1-3\/8\"\u003c\/p\u003e\u003cp\u003e1-3\/16\"\u003c\/p\u003e","brand":"Sea Dog Marine","offers":[{"title":"Default Title","offer_id":50582087958786,"sku":"S-D-321295-1","price":46.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/S-D-321295-1__26433.1789761725.jpg?v=1791080452"},{"product_id":"sea-dog-stainless-steel-hatch-spring-small","title":"Sea Dog Marine Hatch Spring-Small","description":"\u003cp\u003eSea-Dog Stainless Steel Hatch Spring - Small\u003c\/p\u003e\u003cp\u003eThis Sea-Dog corrosion-resistant formed 304 stainless steel hatch spring has an internal wire that prevents the spring from being overextended during normal use. This spring is not recommended for applications where the hatch will scoop wind while boat is underway and overextend spring.\u003c\/p\u003e\u003cp\u003eFormed 304 stainless steel\u003c\/p\u003e\u003cp\u003eFeatures internal wire\u003c\/p\u003e\u003cp\u003eInstalls with (4) #10 RH fasteners or 3\/16\" pop rivets (not included)\u003c\/p\u003e\u003cp\u003eDimensions:\u003c\/p\u003e\u003cp\u003eA: 8-5\/8\"\u003c\/p\u003e\u003cp\u003eB: 1-1\/16\"\u003c\/p\u003e\u003cp\u003eC: 3\/4\"\u003c\/p\u003e","brand":"Sea Dog Marine","offers":[{"title":"Default Title","offer_id":50582091628802,"sku":"S-D-321650-1","price":29.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/S-D-321650-1__09672.1789762089.jpg?v=1791080459"},{"product_id":"sea-dog-medium-stainless-steel-hatch-spring","title":"Sea Dog Marine S.S. Hatch Spring 9","description":"\u003cp\u003eSea-Dog Medium Stainless Steel Hatch Spring\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eFormed 304 Stainless\u003c\/p\u003e\u003cp\u003eInternal Cable\u003c\/p\u003e\u003cp\u003e#6 RH and\/or 1\/8\" Pop Rivet\u003c\/p\u003e\u003cp\u003ePart #\u003c\/p\u003e\u003cp\u003eA\u003c\/p\u003e\u003cp\u003eB\u003c\/p\u003e\u003cp\u003eC\u003c\/p\u003e\u003cp\u003eFastener\u003c\/p\u003e\u003cp\u003eInternal Cable\u003c\/p\u003e\u003cp\u003e321660-1\u003c\/p\u003e\u003cp\u003e9\"\u003c\/p\u003e\u003cp\u003e1-1\/16\"\u003c\/p\u003e\u003cp\u003e1-1\/16\"\u003c\/p\u003e\u003cp\u003e#6 RH and\/or 1\/8\" Pop Rivet\u003c\/p\u003e\u003cp\u003eYes\u003c\/p\u003e","brand":"Sea Dog Marine","offers":[{"title":"Default Title","offer_id":50582091759874,"sku":"S-D-321660-1","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/S-D-321660-1_2__18953.1789759362.webp?v=1791080459"}],"url":"https:\/\/allmarineworld.com\/collections\/hatch.oembed","provider":"All Marine World","version":"1.0","type":"link"}