{"title":"Garelick","description":"\u003cp\u003eGarelick products currently published by All Marine World.\u003c\/p\u003e","products":[{"product_id":"garelick-06-388-knob","title":"Garelick Knob","description":"\u003cp\u003eGarelick 06-388 Knob\u003c\/p\u003e","brand":"Garelick","offers":[{"title":"Default Title","offer_id":50581670363394,"sku":"GAR-06-388","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/06-388__49600.1722511309_9da6a2bc-09cb-417b-9841-8d83d3dbc38d.webp?v=1791078132"},{"product_id":"garelick-2-4-step-folding-pontoon-ladder","title":"Garelick 2-4 Step Fold Pontoon Ldr","description":"\u003cp\u003eGarelick 2-4 Step Folding Pontoon Ladder\u003c\/p\u003e\u003cp\u003eFolds down to 4 steps; hooks fold and ladder stows in locker underneath furniture\u003c\/p\u003e\u003cp\u003eSecuring strap included\u003c\/p\u003e\u003cp\u003eSturdy design with overrail hooks for easy boarding\u003c\/p\u003e\u003cp\u003eLightweight anodized aluminum 1\" (3cm) diameter resists corrosion\u003c\/p\u003e\u003cp\u003eAttaches easily to deck at Side Gate for temporary or permanent mounting with included Shur-Loc catches (76000)\u003c\/p\u003e\u003cp\u003eComfortable contour black traction molded steps\u003c\/p\u003e\u003cp\u003eMounting Instructions\u003c\/p\u003e\u003cp\u003eHOW TO ASSEMBLE GARELICK 2-4 STEP FOLDING PONTOON LADDER\u003c\/p\u003e\u003cp\u003eAssembly Instructions:\u003c\/p\u003e\u003cp\u003eThis ladder is designed to be mounted on the pontoon at the side gate.\u003c\/p\u003e\u003cp\u003eFold out hooks. Slip ladder catches onto ends of both ladder hooks.\u003c\/p\u003e\u003cp\u003ePosition and mark four mounting holes on deck surface.\u003c\/p\u003e\u003cp\u003eNOTE: Make certain ladder standoffs are at or below the centerline of the pontoon floats.\u003c\/p\u003e\u003cp\u003eDrill 8 marked holes with 1\/8” diameter drill bit. Secure the ladder catch using the included screws.\u003c\/p\u003e\u003cp\u003eNOTE: The rubber gasket must be inside catch for proper operation. Larger opening in catch must face away from the ladder and into the deck area.\u003c\/p\u003e\u003cp\u003eAttach ladder to deck by inserting hooks into large opening in catch slot. Slide latch bolts down into slot.\u003c\/p\u003e\u003cp\u003eMake certain ladder hands perpendicular to water surface. Ladder standoffs can be cut as necessary.\u003c\/p\u003e\u003cp\u003eTo cut standoffs, remove the rubber tips, cut to desired length, and reinstall tips.\u003c\/p\u003e\u003cp\u003eRubber tipped standoffs on ladder are intended to abut the pontoon float and cushion the ladder.\u003c\/p\u003e\u003cp\u003eTo remove ladder, slide up and then pull out of catches.\u003c\/p\u003e\u003cp\u003eMaintenance:\u003c\/p\u003e\u003cp\u003ePeriodically check mounting hardware and re-tighten (due to normal boat operation).\u003c\/p\u003e\u003cp\u003eRegular fresh water rinsing and periodic cleaning with a mild abrasive cleaner will help retain luster and help prevent corrosion.\u003c\/p\u003e\u003cp\u003eSafety:\u003c\/p\u003e\u003cp\u003eThis ladder is designed for boat use only\u003c\/p\u003e\u003cp\u003eNever operate your boat with the ladder in positon. Serious injury or damage to your boat or ladder may result.\u003c\/p\u003e\u003cp\u003eInformation sourced from Garelick Pontoon Ladders Product Technical Information.\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Garelick 2-4 Step Folding Pontoon Ladder used for? The Garelick 2-4 Step Folding Pontoon Ladder is designed for boarding a pontoon boat at the side gate. It features overrail hooks and mounts to the deck with included Shur-Loc catches, allowing the ladder to be used for temporary or permanent installation.\u003c\/li\u003e\n\u003cli\u003eHow does the Garelick 2-4 Step Folding Pontoon Ladder stow? The Garelick 2-4 Step Folding Pontoon Ladder folds down to four steps, and its hooks fold for compact storage. The ladder is designed to stow in the locker underneath pontoon furniture, with a securing strap included.\u003c\/li\u003e\n\u003cli\u003eWhat is the Garelick 2-4 Step Folding Pontoon Ladder made from? The Garelick 2-4 Step Folding Pontoon Ladder is made from lightweight anodized aluminum with a 1-inch diameter. It features contoured black traction-molded steps and rubber-tipped standoffs designed to cushion against the pontoon float.\u003c\/li\u003e\n\u003cli\u003eWhat is included with the Garelick 2-4 Step Folding Pontoon Ladder? The Garelick 2-4 Step Folding Pontoon Ladder includes Shur-Loc catches (76000), a securing strap, and mounting screws. The ladder also has overrail hooks and rubber-tipped standoffs for installation at the pontoon side gate.\u003c\/li\u003e\n\u003cli\u003eHow do you install the Garelick Folding Pontoon Ladder? The ladder is mounted at the pontoon side gate by securing the included Shur-Loc catches to the deck and inserting the ladder hooks into the catch slots. The instructions specify using a 1\/8-inch drill bit and positioning the ladder standoffs at or below the centerline of the pontoon floats.\u003c\/li\u003e\n\u003cli\u003eAre there any safety requirements for the Garelick Folding Pontoon Ladder? The Garelick 2-4 Step Folding Pontoon Ladder is designed for boat use only. The manufacturer instructions state that the boat should never be operated with the ladder in position because serious injury or damage to the boat or ladder may result.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garelick","offers":[{"title":"Default Title","offer_id":50581670428930,"sku":"GAR-12350","price":459.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/gar-12350_lg__24340.1558116031_0fc6ff18-1f12-4e5d-a459-7754b5480fa5.jpg?v=1791078134"},{"product_id":"garelick-removable-folding-pontoon-boarding-ladder-w-deck-mounting-cups","title":"Garelick 4 Step Pontoon Folding W\/Cups","description":"\u003cp\u003eGarelick Removable Folding Pontoon Boarding Ladder w\/ Deck Mounting Cups\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eFolds down to 4 steps; hooks fold and ladder stows in locker underneath furniture\u003c\/p\u003e\u003cp\u003eSecuring clip included\u003c\/p\u003e\u003cp\u003eSturdy design with overrail hooks for easy boarding\u003c\/p\u003e\u003cp\u003eLightweight anodized aluminum 1\" (3cm) diameter resists corrosion\u003c\/p\u003e\u003cp\u003eAttaches easily to deck at side gate for temporary or permanent mounting with black poly deck mounting cups\u003c\/p\u003e\u003cp\u003eComfortable contour black traction molded steps\u003c\/p\u003e\u003cp\u003e250 lb. capacity\u003c\/p\u003e\u003cp\u003eIncludes deck mounting cups\u003c\/p\u003e\u003cp\u003eMade in the U.S.A.\u003c\/p\u003e\u003cp\u003eDeck Mounting Cups - For use with 12350-21 ladder\u003c\/p\u003e\u003cp\u003eDeck Mounting Cups - UV resistant durable black poly\u003c\/p\u003e\u003cp\u003eDimensions:\u003c\/p\u003e\u003cp\u003e4 step, Fold Down L: 30\" + 13\" (76cm + 33cm), W: 16\" (4 1cm)\u003c\/p\u003e\u003cp\u003eMounting Instructions\u003c\/p\u003e\u003cp\u003eHOW TO ASSEMBLE GARELICK REMOVABLE FOLDING PONTOON BOARDING LADDER W\/ DECK MOUNTING CUPS\u003c\/p\u003e\u003cp\u003eAssembly Instructions:\u003c\/p\u003e\u003cp\u003eThis ladder is designed to be mounted on the pontoon at the side gate.\u003c\/p\u003e\u003cp\u003eFold out hooks. Slip ladder catches onto ends of both ladder hooks.\u003c\/p\u003e\u003cp\u003ePosition and mark four mounting holes on deck surface.\u003c\/p\u003e\u003cp\u003eNOTE: Make certain ladder standoffs are at or below the centerline of the pontoon floats.\u003c\/p\u003e\u003cp\u003eDrill 8 marked holes with 1\/8” diameter drill bit. Secure the ladder catch using the included screws.\u003c\/p\u003e\u003cp\u003eNOTE: The rubber gasket must be inside catch for proper operation. Larger opening in catch must face away from the ladder and into the deck area.\u003c\/p\u003e\u003cp\u003eAttach ladder to deck by inserting hooks into large opening in catch slot. Slide latch bolts down into slot.\u003c\/p\u003e\u003cp\u003eMake certain ladder hands perpendicular to water surface. Ladder standoffs can be cut as necessary.\u003c\/p\u003e\u003cp\u003eTo cut standoffs, remove the rubber tips, cut to desired length, and reinstall tips.\u003c\/p\u003e\u003cp\u003eRubber tipped standoffs on ladder are intended to abut the pontoon float and cushion the ladder.\u003c\/p\u003e\u003cp\u003eTo remove ladder, slide up and then pull out of catches.\u003c\/p\u003e\u003cp\u003eMaintenance:\u003c\/p\u003e\u003cp\u003ePeriodically check mounting hardware and re-tighten (due to normal boat operation).\u003c\/p\u003e\u003cp\u003eRegular fresh water rinsing and periodic cleaning with a mild abrasive cleaner will help retain luster and help prevent corrosion.\u003c\/p\u003e\u003cp\u003eSafety:\u003c\/p\u003e\u003cp\u003eThis ladder is designed for boat use only\u003c\/p\u003e\u003cp\u003eNever operate your boat with the ladder in positon. Serious injury or damage to your boat or ladder may result.\u003c\/p\u003e\u003cp\u003eInformation sourced from Garelick Pontoon Ladders Product Technical Information.\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Garelick Removable Folding Pontoon Boarding Ladder used for? The Garelick Removable Folding Pontoon Boarding Ladder is designed for boarding a pontoon boat at the side gate. It features overrail hooks and deck mounting cups that allow the ladder to be installed for temporary or permanent use.\u003c\/li\u003e\n\u003cli\u003eHow does the Garelick Removable Folding Pontoon Boarding Ladder stow? The Garelick Removable Folding Pontoon Boarding Ladder folds down to four steps, while its hooks fold for compact storage. The ladder is designed to stow in a locker underneath the pontoon furniture, and a securing clip is included.\u003c\/li\u003e\n\u003cli\u003eWhat is the Garelick Removable Folding Pontoon Boarding Ladder made from? The Garelick Removable Folding Pontoon Boarding Ladder is constructed from lightweight anodized aluminum with a 1-inch diameter. It features contoured black traction-molded steps and has a 250-pound capacity.\u003c\/li\u003e\n\u003cli\u003eWhat are the deck mounting cups included with the Garelick Pontoon Ladder? The ladder includes black poly deck mounting cups designed for use with the 12350-21 ladder. The cups are made from durable, UV-resistant black poly and provide the deck mounting points for the removable ladder.\u003c\/li\u003e\n\u003cli\u003eHow do you remove the Garelick Folding Pontoon Boarding Ladder? To remove the Garelick Removable Folding Pontoon Boarding Ladder, slide the ladder upward and then pull it out of the deck mounting catches. This allows the ladder to be removed when it is not needed.\u003c\/li\u003e\n\u003cli\u003eAre there any safety requirements for the Garelick Pontoon Boarding Ladder? The Garelick Removable Folding Pontoon Boarding Ladder is design…\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garelick","offers":[{"title":"Default Title","offer_id":50581670461698,"sku":"GAR-12350-21","price":296.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/gar-12350-21_lg__31559.1558175705.webp?v=1791078135"},{"product_id":"garelick-premium-folding-pontoon-transom-boarding-ladder","title":"Garelick 2-4 Step Fold Pontoon Lad","description":"\u003cp\u003eGarelick Premium Folding Pontoon Transom Boarding Ladder\u003c\/p\u003e\u003cp\u003ePermanent mount at transom, ideally at stern gate door\u003c\/p\u003e\u003cp\u003eFolds down for easy boarding\u003c\/p\u003e\u003cp\u003eComfortable black countour traction molded steps extra deep for added step surface (5\" x 12\")\u003c\/p\u003e\u003cp\u003eDurable 1\" (3 cm) diameter anodized aluminum tube\u003c\/p\u003e\u003cp\u003eIncludes securing clip, and second step abuts end of pontoon log\u003c\/p\u003e\u003cp\u003e250 lb. capacity\u003c\/p\u003e\u003cp\u003eMade in the USA\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2 - 4 step, Fold Down L: 14\" + 32\" (36 + 81 cm), OL: 46\" (117 cm), 16\" (41 cm), Dimensions from deck to second step: 12\" (30 cm)\u003c\/li\u003e\n\u003cli\u003eFrequently Asked Questions\u003c\/li\u003e\n\u003cli\u003eWhat is the Garelick Premium Folding Pontoon Transom Boarding Ladder used for? The Garelick Premium Folding Pontoon Transom Boarding Ladder is designed for permanent mounting at the transom of a pontoon boat, ideally near the stern gate door. It folds down to provide access for boarding and features extra-deep traction-molded steps for added step surface.\u003c\/li\u003e\n\u003cli\u003eHow does the Garelick Premium Folding Pontoon Transom Boarding Ladder fold for storage? The Garelick Premium Folding Pontoon Transom Boarding Ladder folds down when boarding is needed. A securing clip is included, and the ladder's second step abuts the end of the pontoon log as part of its installation design.\u003c\/li\u003e\n\u003cli\u003eWhat are the steps like on the Garelick Premium Folding Pontoon Transom Boarding Ladder? The ladder features comfortable black contour traction-molded steps with an extra-deep 5\" x 12\" step surface. The design provides additional space on each step for boarding from the transom.\u003c\/li\u003e\n\u003cli\u003eWhat is the Garelick Premium Folding Pontoon Transom Boarding Ladder made from? The Garelick Premium Folding Pontoon Transom Boarding Ladder is constructed from durable 1\" diameter anodized aluminum tubing. It is made in the USA and has a 250-pound capacity.\u003c\/li\u003e\n\u003cli\u003eWhat are the dimensions of the Garelick Premium Folding Pontoon Transom Boarding Ladder? The 2-4 step model has a fold-down length of 14\" + 32\", an overall length of 46\", and a width of 16\". The distance from the deck to the second step is 12\".\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garelick","offers":[{"title":"Default Title","offer_id":50581670560002,"sku":"GAR-12380","price":468.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/gar-12380_lg__49062.1558172222_d9b7bea7-d6de-4305-9ba7-913e8ef49b4b.webp?v=1791078136"},{"product_id":"garelick-pontoon-swim-ladder","title":"Garelick 4 Step Pontoon Ladder","description":"\u003cp\u003eGarelick Pontoon Swim Ladder\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eFor use at pontoon side gate or transom\u003c\/p\u003e\u003cp\u003eAttaches easily to deck with included Shur-loc catches (76000)\u003c\/p\u003e\u003cp\u003eVinyl sleeves on verticals protect pontoon\u003c\/p\u003e\u003cp\u003eHooks fold flat for stowage\u003c\/p\u003e\u003cp\u003eDurable 1\" (3cm) diameter Anodized aluminum tube.\u003c\/p\u003e\u003cp\u003eComfortable white traction molded poly steps.\u003c\/p\u003e\u003cp\u003eShur-loc catch brackets (76000) allow for permanent or removable mounting.\u003c\/p\u003e\u003cp\u003eDimensions:\u003c\/p\u003e\u003cp\u003e3 step, L 36” (91cm), W 15” (38cm)\u003c\/p\u003e\u003cp\u003e4 step, L 50” (127cm), W 15” (38cm)\u003c\/p\u003e\u003cp\u003eMounting Instructions\u003c\/p\u003e\u003cp\u003eHOW TO MOUNT GARELICK PONTOON SWIM LADDER\u003c\/p\u003e\u003cp\u003eMounting Instructions:\u003c\/p\u003e\u003cp\u003eThis ladder was designed to be mounted on the pontoon at the side gate.\u003c\/p\u003e\u003cp\u003eSlip ladder catches onto ends of both ladder hooks. Position and mark four mounting holes on boat deck.\u003c\/p\u003e\u003cp\u003eSecure ladder catches in position by drilling eight holes with a 9\/64” drill bit and using screws.\u003c\/p\u003e\u003cp\u003eNote: Larger opening must face away from ladder and rubber gasket must be inside catch for proper operation.\u003c\/p\u003e\u003cp\u003eAttach ladder to boat by inserting hooks of ladder into large opening of catch slot. Slide ladder down.\u003c\/p\u003e\u003cp\u003eMake certain that ladder hangs perpendicular to water surface.\u003c\/p\u003e\u003cp\u003eVinyl sleeves between first and second step on verticals are intended to abut pontoon and cushion ladder.\u003c\/p\u003e\u003cp\u003eTo remove ladder, slide up and then pull out of catch. Hooks fold flat for easy stowage.\u003c\/p\u003e\u003cp\u003eSafety:\u003c\/p\u003e\u003cp\u003eDo not use ladder when the boat’s motor is running.\u003c\/p\u003e\u003cp\u003eInformation sourced from Garelick Mounting Instructions for Swimming Ladder Model 15240\u003c\/p\u003e\u003cp\u003eInstallation Instructions\u003c\/p\u003e","brand":"Garelick","offers":[{"title":"Default Title","offer_id":50581670625538,"sku":"GAR-15240-G","price":300.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/gar-15230_lg__96737.1558175769_a4a2c40e-c528-468c-8165-ca3204f3e2c1.jpg?v=1791078137"},{"product_id":"garelick-outboard-swim-platform-with-fold-down-ladder","title":"Garelick Outboard Platform W\/Ladder","description":"\u003cp\u003eGarelick Outboard Swim Platform with Fold Down Ladder\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eFor use on outboard transoms\u003c\/p\u003e\u003cp\u003eOne stainless wrap around rail and one underside support rail, reversible\u003c\/p\u003e\u003cp\u003eMounts at 10 degree angle on transom\u003c\/p\u003e\u003cp\u003eDurable HDPE platform is pre-drilled for easy assembly\u003c\/p\u003e\u003cp\u003eStainless Steel hardware\u003c\/p\u003e\u003cp\u003e1\" (3cm) diameter stainless steel\u003c\/p\u003e\u003cp\u003eInstructions:\u003c\/p\u003e\u003cp\u003eAfter determining which side of the platform is most suitable for the handrail, mount it to the platform using 2 bolts through holes in platform. Secure with 2 locknuts.\u003c\/p\u003e\u003cp\u003eMount SS strut 22” by inserting bolt through hole and secure with locknut.\u003c\/p\u003e\u003cp\u003eMount SS strut 11” by inserting two bolts through holes and secure with 1 locknut.\u003c\/p\u003e\u003cp\u003eChoose most suitable side of transom for mounting platform. Turn motor unit as far as possible to that side. Make a line on the transom indicating motor unit’s full extension to that side.\u003c\/p\u003e\u003cp\u003ePosition platform away from drawn line at desired mounting location, parallel to the water line, and mark 4 mounting holes through flattened ends of rails and\/or struts onto the transom.\u003c\/p\u003e\u003cp\u003eDrill four marked holes with a bit compatible with selected fasteners (fasteners not provided). Hold drill perpendicular to transom when drilling.\u003c\/p\u003e\u003cp\u003eIf transom is less than 2” thick, it is recommended that a backing plate be mounted on the inside of transom.\u003c\/p\u003e\u003cp\u003eNOTE: The backing plate should be made of either aluminum, marine plywood or some other suitable non-compressive material.\u003c\/p\u003e\u003cp\u003eCoat the mounting surfaces of the rails and\/or struts with a marine grade adhesive\/caulking compound; squeeze a small amount into mounting holes in transom. Insert selected bolts through holes and secure in position with suitable fasteners.\u003c\/p\u003e\u003cp\u003eMaintenance:\u003c\/p\u003e\u003cp\u003ePeriodically check mounting hardware and re-tighten (due to normal boat operation).\u003c\/p\u003e\u003cp\u003eRegular fresh water rinsing and periodic cleaning with a mild abrasive cleaner will help retain luster and help prevent corrosion.\u003c\/p\u003e\u003cp\u003eInformation sourced from Garelick Assembly Instructions for Platforms Technical Data\u003c\/p\u003e\u003cp\u003eInstallation Instructions\u003c\/p\u003e","brand":"Garelick","offers":[{"title":"Default Title","offer_id":50581670691074,"sku":"GAR-19535","price":419.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/Untitled-1__47776.1763741538.webp?v=1791078138"},{"product_id":"garelick-outboard-transom-platform-wtelescoping-ladder","title":"Garelick O\/B Platform W\/Tele Ladder","description":"\u003cp\u003eGarelick Outboard Transom Platform w\/Telescoping Ladder\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eOne stainless wraparound rail and one underside support rail (both 1\" (3cm) diameter, Reversible)\u003c\/p\u003e\u003cp\u003eDurable HDPE platform is pre-drilled for easy assembly\u003c\/p\u003e\u003cp\u003eWith 2 Step Telescoping Ladder. Overall: 18\" Wide x 19\" Deep. Height above and below platform: 11.5\".\u003c\/p\u003e\u003cp\u003eLadder: Length deployed: 23.5\", Length stowed: 13.5\", Width: 11.25\". Platform Only: 18\" Wide x 15\" Deep x .75\" Tall\u003c\/p\u003e\u003cp\u003eMounts at 10 degree angle on transom\u003c\/p\u003e\u003cp\u003eLadder Steps telescope down easily\u003c\/p\u003e\u003cp\u003eLadder slides up and under platform for stowage\u003c\/p\u003e\u003cp\u003eFlat Poly treads for extra comfort\u003c\/p\u003e\u003cp\u003eInstructions:\u003c\/p\u003e\u003cp\u003eAfter determining which side of the platform is most suitable for the handrail, mount it to the platform using 2 bolts through holes in platform. Secure with 2 locknuts.\u003c\/p\u003e\u003cp\u003eMount SS strut 22” by inserting bolt through hole and secure with locknut.\u003c\/p\u003e\u003cp\u003eMount SS strut 11” by inserting two bolts through holes and secure with 1 locknut.\u003c\/p\u003e\u003cp\u003eChoose most suitable side of transom for mounting platform. Turn motor unit as far as possible to that side. Make a line on the transom indicating motor unit’s full extension to that side.\u003c\/p\u003e\u003cp\u003ePosition platform away from drawn line at desired mounting location, parallel to the water line, and mark 4 mounting holes through flattened ends of rails and\/or struts onto the transom.\u003c\/p\u003e\u003cp\u003eDrill four marked holes with a bit compatible with selected fasteners (fasteners not provided). Hold drill perpendicular to transom when drilling.\u003c\/p\u003e\u003cp\u003eIf transom is less than 2” thick, it is recommended that a backing plate be mounted on the inside of transom.\u003c\/p\u003e\u003cp\u003eNOTE: The backing plate should be made of either aluminum, marine plywood or some other suitable non-compressive material.\u003c\/p\u003e\u003cp\u003eCoat the mounting surfaces of the rails and\/or struts with a marine grade adhesive\/caulking compound; squeeze a small amount into mounting holes in transom. Insert selected bolts through holes and secure in position with suitable fasteners.\u003c\/p\u003e\u003cp\u003eMaintenance:\u003c\/p\u003e\u003cp\u003ePeriodically check mounting hardware and re-tighten (due to normal boat operation).\u003c\/p\u003e\u003cp\u003eRegular fresh water rinsing and periodic cleaning with a mild abrasive cleaner will help retain luster and help prevent corrosion.\u003c\/p\u003e\u003cp\u003eInformation sourced from Garelick Assembly Instructions for Platforms Technical Data\u003c\/p\u003e\u003cp\u003eInstallation Instructions\u003c\/p\u003e\u003cp\u003eRetaining Strap Installation Instructions\u003c\/p\u003e","brand":"Garelick","offers":[{"title":"Default Title","offer_id":50581672329474,"sku":"GAR-19536","price":416.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/Untitled-1__03241.1773352368.jpg?v=1791078139"},{"product_id":"garelick-transom-platform-w-telescoping-ladder","title":"Garelick O\/B Platform W\/2 Step Ladder","description":"\u003cp\u003eGarelick Transom Platform w\/ Telescoping Ladder\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eDurable HDPE platform is pre-drilled for easy assembly\u003c\/p\u003e\u003cp\u003eMounts at 10 degree angle on transom\u003c\/p\u003e\u003cp\u003eLadder steps telescope down easily\u003c\/p\u003e\u003cp\u003eLadder slides up and over platform for stowage\u003c\/p\u003e\u003cp\u003eFlat poly treads for extra comfort\u003c\/p\u003e\u003cp\u003eOne stainless rail and one underside support rail (both 1\" (3cm) diameter, reversible)\u003c\/p\u003e\u003cp\u003eDimensions:\u003c\/p\u003e\u003cp\u003e18\" W x 15.5\" D x .75\" T (46x39x2cm)\u003c\/p\u003e\u003cp\u003eHeight above platform: 12.5\" (32cm)\u003c\/p\u003e\u003cp\u003e2 steps Length deployed: 22.75\" (58cm)\u003c\/p\u003e\u003cp\u003eLength stowed: 17\" (43cm)\u003c\/p\u003e\u003cp\u003eOverall height: 5\" (13cm)\u003c\/p\u003e\u003cp\u003eWidth: 13.5\" (34cm)\u003c\/p\u003e\u003cp\u003eInstallation Instructions\u003c\/p\u003e","brand":"Garelick","offers":[{"title":"Default Title","offer_id":50581672493314,"sku":"GAR-19537","price":423.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/Untitled-1__26448.1763741587_28138ee9-0971-4087-9ff0-0294ae70b7a3.jpg?v=1791078140"},{"product_id":"garelick-i-o-swim-platform-with-fold-down-ladder","title":"Garelick I\/O Platform W\/Ladder","description":"\u003cp\u003eGarelick I-O Swim Platform with Fold Down Ladder\u003c\/p\u003e\u003cp\u003eWhite polyethylene platform for use on inboard\/outboard transom. Two, 1\" diameter stainless steel wrap around rails. Durable platform is easy to clean. Mounts at 10° angle on transom. Includes stainless steel hardware. Dimensions: 18\" wide x 15.5\" deep x 1.5\" thick. Rail height is 12.5\" above platform. Comes with one step fold down ladder, 13\"L x 14.5\"W\u003c\/p\u003e\u003cp\u003eAssembly Instructions:\u003c\/p\u003e\u003cp\u003eMount hand rails to platform by inserting 4 bolts through holes in platform. Secure with 4 locknuts.\u003c\/p\u003e\u003cp\u003eMount SS strut 22” by inserting bolt through hole and secure with locknut.\u003c\/p\u003e\u003cp\u003eMount SS strut 11” by inserting two bolts through holes and secure with 1 locknut.\u003c\/p\u003e\u003cp\u003eChoose most suitable side of transom for mounting platform. Turn motor unit as far as possible to that side. Make a line on the transom indicating motor unit’s full extension to that side.\u003c\/p\u003e\u003cp\u003ePosition platform away from drawn line at desired mounting location, parallel to the water line, and mark 4 mounting holes through flattened ends of rails and\/or struts onto the transom.\u003c\/p\u003e\u003cp\u003eDrill four marked holes with a bit compatible with selected fasteners (fasteners not provided). Hold drill perpendicular to transom when drilling.\u003c\/p\u003e\u003cp\u003eIf transom is less than 2” thick, it is recommended that a backing plate be mounted on the inside of transom.\u003c\/p\u003e\u003cp\u003eNOTE: The backing plate should be made of either aluminum, marine plywood or some other suitable non-compressive material.\u003c\/p\u003e\u003cp\u003eCoat the mounting surfaces of the rails and\/or struts with a marine grade adhesive\/caulking compound; squeeze a small amount into mounting holes in transom. Insert selected bolts through holes and secure in position with suitable fasteners.\u003c\/p\u003e\u003cp\u003eMaintenance:\u003c\/p\u003e\u003cp\u003ePeriodically check mounting hardware and re-tighten (due to normal boat operation).\u003c\/p\u003e\u003cp\u003eRegular fresh water rinsing and periodic cleaning with a mild abrasive cleaner will help retain luster and help prevent corrosion.\u003c\/p\u003e\u003cp\u003eInformation sourced from Garelick Assembly Instructions for Platforms Technical Data\u003c\/p\u003e\u003cp\u003eInstallation Instructions\u003c\/p\u003e","brand":"Garelick","offers":[{"title":"Default Title","offer_id":50581672558850,"sku":"GAR-19545","price":436.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/Untitled-1__29060.1771824032_ec5b754f-8f73-4c30-a148-521192b5d4d3.webp?v=1791078140"},{"product_id":"garelick-i-o-swim-platform-with-telescoping-ladder","title":"Garelick I\/O Platform W\/Tele Ladder","description":"\u003cp\u003eGarelick I-O Swim Platform with Telescope Ladder\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eFor use on Inboard\/Outboard transoms\u003c\/p\u003e\u003cp\u003eStainless steel wrap-around 1\" diameter rails\u003c\/p\u003e\u003cp\u003eMounts at a 10° angle on transom\u003c\/p\u003e\u003cp\u003eDurable, high density, white polyethylene platform (18\"W X 15-1\/2\"D X 3\/4\"H)\u003c\/p\u003e\u003cp\u003eRail Height 12-1\/2\" above and below platform\u003c\/p\u003e\u003cp\u003eElectropolished stainless steel 2 step ladder\u003c\/p\u003e\u003cp\u003eLadder steps telescope down easily\u003c\/p\u003e\u003cp\u003ePoly comfort steps\u003c\/p\u003e\u003cp\u003eStainless steel hardware\u003c\/p\u003e\u003cp\u003eLength deployed: 22-3\/4\"\u003c\/p\u003e\u003cp\u003eLength stowed: 17\" Overall height: 5\" Width: 13.5\"\u003c\/p\u003e\u003cp\u003eMounting Instructions:\u003c\/p\u003e\u003cp\u003eMount hand rails to platform by inserting 4 bolts through holes in platform. Secure with 4 locknuts.\u003c\/p\u003e\u003cp\u003eMount SS strut 22” by inserting bolt through hole and secure with locknut.\u003c\/p\u003e\u003cp\u003eMount SS strut 11” by inserting two bolts through holes and secure with 1 locknut.\u003c\/p\u003e\u003cp\u003eChoose most suitable side of transom for mounting platform. Turn motor unit as far as possible to that side. Make a line on the transom indicating motor unit’s full extension to that side.\u003c\/p\u003e\u003cp\u003ePosition platform away from drawn line at desired mounting location, parallel to the water line, and mark 4 mounting holes through flattened ends of rails and\/or struts onto the transom.\u003c\/p\u003e\u003cp\u003eDrill four marked holes with a bit compatible with selected fasteners (fasteners not provided). Hold drill perpendicular to transom when drilling.\u003c\/p\u003e\u003cp\u003eIf transom is less than 2” thick, it is recommended that a backing plate be mounted on the inside of transom.\u003c\/p\u003e\u003cp\u003eNOTE: The backing plate should be made of either aluminum, marine plywood or some other suitable non-compressive material.\u003c\/p\u003e\u003cp\u003eCoat the mounting surfaces of the rails and\/or struts with a marine grade adhesive\/caulking compound; squeeze a small amount into mounting holes in transom. Insert selected bolts through holes and secure in position with suitable fasteners.\u003c\/p\u003e\u003cp\u003eMaintenance:\u003c\/p\u003e\u003cp\u003ePeriodically check mounting hardware and re-tighten (due to normal boat operation).\u003c\/p\u003e\u003cp\u003eRegular fresh water rinsing and periodic cleaning with a mild abrasive cleaner will help retain luster and help prevent corrosion.\u003c\/p\u003e\u003cp\u003eInformation sourced from Garelick Assembly Instructions for Platforms Technical Data\u003c\/p\u003e\u003cp\u003eInstallation Instructions\u003c\/p\u003e\u003cp\u003eRetaining Strap Installation Instructions\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Garelick I-O Swim Platform with Telescope Ladder designed for? The Garelick I-O Swim Platform with Telescope Ladder is designed for use on inboard\/outboard transoms. It includes a durable white polyethylene platform, stainless steel wrap-around rails, and a two-step electropolished stainless steel ladder that telescopes down for use.\u003c\/li\u003e\n\u003cli\u003eWhat are the dimensions of the Garelick I-O Swim Platform? The white polyethylene platform measures 18\" wide by 15-1\/2\" deep by 3\/4\" high. The platform mounts at a 10° angle on the transom, and the stainless steel rails extend 12-1\/2\" above and below the platform.\u003c\/li\u003e\n\u003cli\u003eHow does the telescope ladder on the Garelick I-O Swim Platform work? The stainless steel two-step ladder telescopes down easily when needed. Its deployed length is 22-3\/4\", while its stowed length is 17\". The ladder also features poly comfort steps.\u003c\/li\u003e\n\u003cli\u003eWhat hardware is included with the Garelick I-O Swim Platform? The swim platform includes stainless steel hardware for assembling the platform, rails, and struts. Fasteners for mounting the completed platform to the transom are not provided and must be selected to suit the installation.\u003c\/li\u003e\n\u003cli\u003eHow should the Garelick I-O Swim Platform be mounted to an inboard\/outboard transom? Position the platform at the desired location, parallel to the water line, and mark the four transom mounting holes. Drill the holes perpendicular to the transom, then use marine-grade adhesive or caulking on the mounting surfaces and holes before securing the platform with suitable fasteners. If the transom is less than 2\" thick, a suitable non-compressive backing plate is recommended.\u003c\/li\u003e\n\u003cli\u003eHow should the Garelick I-O Swim Platform be maintained? Periodically check the mou…\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garelick","offers":[{"title":"Default Title","offer_id":50581672624386,"sku":"GAR-19546","price":432.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/Untitled-1__25141.1763741551_09e85437-73c7-4fe4-b27a-c8bdfa4dab78.webp?v=1791078141"},{"product_id":"garelick-telescoping-over-platform-ladder","title":"Garelick Telescoping Over Platform Ladder","description":"\u003cp\u003eGarelick Telescoping Over Swim Platform Ladder\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eSteps fold out and over, and telescope down easily\u003c\/p\u003e\u003cp\u003eSteps fold over flat on platform for compact stowage\u003c\/p\u003e\u003cp\u003eFlat poly treads for increased comfort\u003c\/p\u003e\u003cp\u003eSecuring strap included\u003c\/p\u003e\u003cp\u003eElectropolished stainless steel\u003c\/p\u003e\u003cp\u003eStandard folding gudgeons\u003c\/p\u003e\u003cp\u003e2 Step measures 22.5\" long deployed, 13.5\" long stowed, overall height 1.25\", 12\" wide, 4\" gudgeons\u003c\/p\u003e\u003cp\u003e3 Step measures 32.25\" long deployed, 14.5\" long stowed, overall height 1.5\", 12\" wide, 4\" gudgeons\u003c\/p\u003e\u003cp\u003eMounting Instructions:\u003c\/p\u003e\u003cp\u003eUsing the gudgeon as a template, mark the four bracket holes on the platform for drilling at desired location.\u003c\/p\u003e\u003cp\u003eNote: Make certain that the brackets are located on a strong, solid surface of the platform. If this is not possible, use a backing plate to make the platform strong enough for mounting.\u003c\/p\u003e\u003cp\u003eDrill the four marked holes with a suitable drill bit, making sure to keep the drill perpendicular to the platform’s surface.\u003c\/p\u003e\u003cp\u003eMount the ladder to the platform with fasteners suitable for your particular installation.\u003c\/p\u003e\u003cp\u003ePeriodically check fasteners for tightness and polish the stainless steel with a suitable marine grade polish to increase longevity.\u003c\/p\u003e\u003cp\u003eMaintenance:\u003c\/p\u003e\u003cp\u003eRegular fresh water rinsing and periodic cleaning with a mild abrasive cleaner will help retain luster and help reduce corrosion.\u003c\/p\u003e\u003cp\u003ePeriodically check mounting hardware and re-tighten (due to normal boat operation).\u003c\/p\u003e\u003cp\u003eSafety:\u003c\/p\u003e\u003cp\u003eNever operate your boat with the ladder in “down” position. Serious injury or damage to your boat or ladder may result.\u003c\/p\u003e\u003cp\u003eInformation sourced from the Garelick 19615 Mounting Instructions Technical Page\u003c\/p\u003e\u003cp\u003eInstallation Instructions\u003c\/p\u003e\u003cp\u003eRetaining Strap Installation Instructions\u003c\/p\u003e","brand":"Garelick","offers":[{"title":"2 Steps","offer_id":50581672657154,"sku":"GAR-19615","price":167.49,"currency_code":"USD","in_stock":true},{"title":"4 Steps","offer_id":50581672689922,"sku":"GAR-19617","price":321.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/385307_source_1756214981_56687ece-719e-4a53-a838-6498a2c2719a.jpg?v=1791078143"},{"product_id":"garelick-out-of-sight-telescoping-ladder","title":"Garelick Out Of Sight Telescoping Ladder","description":"\u003cp\u003eGarelick Out of Sight Telescoping Ladder\u003c\/p\u003e\u003cp\u003eThe Garelick Out of Sight Telescoping Ladder is a great choice for boaters looking to easily stow their ladder when not in use. When needed, this ladder easily telescopes down into the water. Once the ladder is no longer needed, it slides up and under the swim platform for stowage. This durable ladder is constructed of stainless steel and features a self-locking angled support bracket. Flat poly treads ensure comfort and ease of use. The Garelick Out of Sight Telescoping Ladder comes with mounting hardware, a bungee cord securing strap, and installation instructions. 2 and 3 step models available.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eSteps telescope down easily\u003c\/p\u003e\u003cp\u003eLadder slides up, under platform for stowage\u003c\/p\u003e\u003cp\u003eFlat poly treads for increased comfort\u003c\/p\u003e\u003cp\u003eMounting hardware and securing strap included\u003c\/p\u003e\u003cp\u003eSelf-locking angled support bracket\u003c\/p\u003e\u003cp\u003eBungee cord securing strap included\u003c\/p\u003e\u003cp\u003eElectropolished Stainless Steel - rated to 400 lbs.\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003ePart #\u003c\/p\u003e\u003cp\u003eStep Count\u003c\/p\u003e\u003cp\u003eOverall Height\/Width\u003c\/p\u003e\u003cp\u003eDeployed Length\u003c\/p\u003e\u003cp\u003eStowed Length\u003c\/p\u003e\u003cp\u003e19622-61\u003c\/p\u003e\u003cp\u003e2\u003c\/p\u003e\u003cp\u003e2.5\" (6cm), 11.38\" (29cm)\u003c\/p\u003e\u003cp\u003e23.25\" (59cm)\u003c\/p\u003e\u003cp\u003e13.5\" (34cm)\u003c\/p\u003e\u003cp\u003e19623-61\u003c\/p\u003e\u003cp\u003e3\u003c\/p\u003e\u003cp\u003e2.5\" (6cm), 11.63\" (30cm)\u003c\/p\u003e\u003cp\u003e34.5\" (88cm)\u003c\/p\u003e\u003cp\u003e14.5\" (37cm)\u003c\/p\u003e\u003cp\u003eMounting Instructions:\u003c\/p\u003e\u003cp\u003ePosition the mounting bracket with the ladder in the area to be attached. Mark the bracket’s four mounting holes onto the deck surface.\u003c\/p\u003e\u003cp\u003eDrill the four marked holes with a suitable drill bit.\u003c\/p\u003e\u003cp\u003eNOTE: It is recommended to through0bolt this ladder for a secure installation\u003c\/p\u003e\u003cp\u003eMount the ladder in place on one side by putting the ladder into the bracket and placing it up to the drilled holes.\u003c\/p\u003e\u003cp\u003eInsert mounting screws. Secure the ladder in place with fasteners (not provided, as installations vary).\u003c\/p\u003e\u003cp\u003eSlide the other mounting bracket, onto the ladder vertical as before. Center the ladder tubes within the brackets and make sure they are parallel to each other.\u003c\/p\u003e\u003cp\u003eMark the hole locations of this bracket onto the deck. Drill holes and secure in place.\u003c\/p\u003e\u003cp\u003eWhen underway, fold ladder up and secure using the Velcro strap provided.\u003c\/p\u003e\u003cp\u003eMaintenance:\u003c\/p\u003e\u003cp\u003ePeriodically check mounting hardware and re-tighten (due to normal boat operation).\u003c\/p\u003e\u003cp\u003eRegular fresh water rinsing and periodic cleaning with a mild abrasive cleaner will help retain luster and help prevent corrosion.\u003c\/p\u003e\u003cp\u003eSafety:\u003c\/p\u003e\u003cp\u003eThis ladder is designed for boat use only\u003c\/p\u003e\u003cp\u003eNever operate your boat with the ladder in position. Serious injury or damage to your boat or ladder may result.\u003c\/p\u003e\u003cp\u003eInformation sourced from Garelick Instructions for 19622-61, 19623-61 Under Platform Telescoping Ladder\u003c\/p\u003e","brand":"Garelick","offers":[{"title":"2 Steps","offer_id":50581672755458,"sku":"GAR-19622","price":209.99,"currency_code":"USD","in_stock":true},{"title":"3 Steps","offer_id":50581672788226,"sku":"GAR-19623","price":246.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/385403_source_1756214009.jpg?v=1791078144"},{"product_id":"garelick-under-platform-double-tube-telescoping-dive-ladder","title":"Garelick 3 Step Undr Plat Tel Dive Ldr","description":"\u003cp\u003eGarelick Under Platform Double Tube Telescoping Dive Ladder\u003c\/p\u003e\u003cp\u003eUnique design - 30 degree angle for ease of use\u003c\/p\u003e\u003cp\u003eElectropolished stainless steel\u003c\/p\u003e\u003cp\u003eDual vertical telescoping tube body\u003c\/p\u003e\u003cp\u003eSmooth slide with nylon bushing between ladder sections prevent galling and inadvertent deployment\u003c\/p\u003e\u003cp\u003eOval shaped steps with non-skid surface for comfort\u003c\/p\u003e\u003cp\u003eMade in the USA\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e3 step, 31 1\/2\" (80cm) deployed, 16 1\/2\" (42cm) stowed, platform sliding gudgeon: 11 1\/4\" (29cm), width: 7\" (18cm) wide x 11 1\/4\" deep; Ladder step width: 13 1\/4\"\u003c\/li\u003e\n\u003cli\u003eFrequently Asked Questions\u003c\/li\u003e\n\u003cli\u003eWhat is the Garelick Under Platform Double Tube Telescoping Dive Ladder used for? The Garelick Under Platform Double Tube Telescoping Dive Ladder is designed to provide access from a boat platform into the water. Its 30-degree angle is designed for ease of use, while the telescoping design allows the ladder to extend when needed and stow under the platform.\u003c\/li\u003e\n\u003cli\u003eHow does the Garelick Under Platform Double Tube Telescoping Dive Ladder telescope? The ladder features a dual vertical telescoping tube body with nylon bushings between the ladder sections. The bushings provide a smooth slide and help prevent galling and inadvertent deployment.\u003c\/li\u003e\n\u003cli\u003eWhat is the Garelick Under Platform Double Tube Telescoping Dive Ladder made from? The Garelick Under Platform Double Tube Telescoping Dive Ladder is made from electropolished stainless steel and manufactured in the USA. Its oval-shaped steps feature a non-skid surface for comfort.\u003c\/li\u003e\n\u003cli\u003eWhat are the dimensions of the Garelick Under Platform Double Tube Telescoping Dive Ladder? The 3-step ladder measures 31-1\/2\" when deployed and 16-1\/2\" when stowed. The platform sliding gudgeon measures 11-1\/4\", the mounting area is 7\" wide by 11-1\/4\" deep, and the ladder step width is 13-1\/4\".\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garelick","offers":[{"title":"Default Title","offer_id":50581672853762,"sku":"GAR-19636","price":1119.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/gar-19636_lg__28694.1558172681.webp?v=1791078145"},{"product_id":"garelick-under-platform-ladder","title":"Garelick Under Plat Sliding Ldr-3 Step","description":"\u003cp\u003eGarelick Under Platform Sliding Ladder\u003c\/p\u003e\u003cp\u003eThe Garelick Under Platform Sliding Ladder is a durable, convenient ladder that is designed for under platform use. This ladder stows easily and compactly within its own length when not in use. The spring-loaded locking mechanism secures the ladder when stowed. Constructed of stainless steel, the Garelick Sliding Ladder is rated for up to 400 lbs.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eIdeal for under swim platforms or under the deck on bow or side of pontoon boats\u003c\/p\u003e\u003cp\u003eLadder stows compactly within its own length\u003c\/p\u003e\u003cp\u003eSpring loaded self-locking for stowage\u003c\/p\u003e\u003cp\u003eFlat poly treads for increased comfort\u003c\/p\u003e\u003cp\u003eStainless steel construction\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eStep Count: 3\u003c\/p\u003e\u003cp\u003eOverall Height\/Width: 3\", 11.5\"\u003c\/p\u003e\u003cp\u003eDeployed Length: 33.5\"\u003c\/p\u003e\u003cp\u003eStowed Length: 16\"\u003c\/p\u003e\u003cp\u003eSupport Frame Dimensions: 15.85\" L x 13.88\" W\u003c\/p\u003e\u003cp\u003eMounting Holes: (3) 1\/4\" mount holes on each side; 6\" spacing\u003c\/p\u003e\u003cp\u003eStainless Steel - rated to 400 lbs.\u003c\/p\u003e\u003cp\u003eClick to Download Garelick Under Platform Sliding Ladder Installation Instructions\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Garelick Under Platform Sliding Ladder used for? The Garelick Under Platform Sliding Ladder is designed for under-platform applications, including under swim platforms or beneath the deck on the bow or side of pontoon boats. Its sliding design allows the ladder to stow compactly within its own length when not in use.\u003c\/li\u003e\n\u003cli\u003eHow does the Garelick Under Platform Sliding Ladder stay secured when stowed? The Garelick Under Platform Sliding Ladder uses a spring-loaded, self-locking mechanism to secure the ladder in its stowed position. The ladder is designed to stow compactly within its own length for convenient storage.\u003c\/li\u003e\n\u003cli\u003eWhat is the Garelick Under Platform Sliding Ladder made of? The Garelick Under Platform Sliding Ladder is constructed of stainless steel and features flat poly treads designed for increased comfort.\u003c\/li\u003e\n\u003cli\u003eHow much weight can the Garelick Under Platform Sliding Ladder support? The Garelick Under Platform Sliding Ladder is rated for up to 400 lbs.\u003c\/li\u003e\n\u003cli\u003eWhat are the dimensions of the Garelick Under Platform Sliding Ladder? The 3-step ladder has an overall height\/width of 3\" x 11.5\", a deployed length of 33.5\", and a stowed length of 16\". The support frame measures 15.85\" L x 13.88\" W.\u003c\/li\u003e\n\u003cli\u003eWhat are the mounting hole specifications for the Garelick Under Platform Sliding Ladder? The Garelick Under Platform Sliding Ladder has three 1\/4\" mounting holes on each side, for a total of six mounting holes. The mounting holes have 6\" spacing.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garelick","offers":[{"title":"Default Title","offer_id":50581672919298,"sku":"GAR-19643","price":325.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/gar-19643_lg__05077.1558176133.webp?v=1791078146"},{"product_id":"garelick-over-platform-telescoping-ladder-84432-html","title":"Garelick Over- Platform Telescoping Ladder","description":"\u003cp\u003eGarelick Over- Platform Telescoping Ladder\u003c\/p\u003e\u003cp\u003eSteps - fold out and over, telescope down easily\u003c\/p\u003e\u003cp\u003eCompact stowage - steps fold over flat on platform\u003c\/p\u003e\u003cp\u003eFlat poly treads for increased support\u003c\/p\u003e\u003cp\u003eStandard folding gudgeons with convenient grab bar for easier boarding\u003c\/p\u003e\u003cp\u003eElectropolished 304 stainless steel - rated to 400 lbs.\u003c\/p\u003e\u003cp\u003eBungee cord securing strap included\u003c\/p\u003e\u003cp\u003eNylon bushings between ladder sections prevent inadvertent deployment when flipping ladder into the water\u003c\/p\u003e\u003cp\u003eAvailable in either 3 or 4 step models\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003e19676: 3 step, L depolyed: 34.5\" (88 cm), L stowed: 14.5\" (37 cm), Overall height: 1.25\" (3 cm), W: 11.5\" (29 cm), L of gudgeons: 7\" (18 cm)\u003c\/p\u003e\u003cp\u003e19677: 4 step, L deployed: 45.5\" (116 cm). L stowed: 15.5\" (40 cm), Overall height: 1.5\" (4 cm), W: 12\" (30.5 cm), L of gudgeons: 6.5\" (17 cm)\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Garelick Over-Platform Telescoping Ladder used for? The Garelick Over-Platform Telescoping Ladder is designed for boarding from a boat platform. Its steps fold out and over the platform and telescope down into the water, while the compact design allows the steps to fold flat for storage.\u003c\/li\u003e\n\u003cli\u003eWhat sizes are available for the Garelick Over-Platform Telescoping Ladder? The Garelick Over-Platform Telescoping Ladder is available in 3-step and 4-step models. The 19676 3-step model measures 34.5 inches deployed and 14.5 inches stowed, while the 19677 4-step model measures 45.5 inches deployed and 15.5 inches stowed.\u003c\/li\u003e\n\u003cli\u003eWhat is the Garelick Over-Platform Telescoping Ladder made from? The Garelick Over-Platform Telescoping Ladder is constructed from electropolished 304 stainless steel. The ladder is rated to support up to 400 pounds and features flat poly treads for increased support.\u003c\/li\u003e\n\u003cli\u003eHow does the Garelick Over-Platform Telescoping Ladder stay secured during storage? The Garelick Over-Platform Telescoping Ladder includes a bungee cord securing strap. Nylon bushings between the ladder sections also help prevent inadvertent deployment when the ladder is flipped into the water.\u003c\/li\u003e\n\u003cli\u003eHow does the Garelick Over-Platform Telescoping Ladder make boarding easier? The ladder features standard folding gudgeons and a convenient grab bar to assist with boarding. Its flat poly treads provide increased support, while the steps telescope down into the water for access from the platform.\u003c\/li\u003e\n\u003cli\u003eWhat are the dimensions of the Garelick Over-Platform Telescoping Ladder? The 19676 3-step model is 11.5 inches wide, with a 1.25-inch overall height and 7-inch gudgeon length. The 19677 4-step model is 12 inches wide, with a 1.5-inch overall height and 6.5-inch gudgeon length.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garelick","offers":[{"title":"3 Steps","offer_id":50581672984834,"sku":"GAR-19676","price":234.99,"currency_code":"USD","in_stock":false},{"title":"4 Steps","offer_id":50581673017602,"sku":"GAR-19677","price":336.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/gar-19676_lg__81430.1558172885_49c0497e-81d8-4c5f-ac24-ee7933a49f6a.webp?v=1791078147"},{"product_id":"garelick-telescoping-3-step-transom-ladder","title":"Garelick 3 Step Transom Mt Ladder","description":"\u003cp\u003eGarelick Telescoping 3-Step Transom Ladder\u003c\/p\u003e\u003cp\u003eThe Garelick Telescoping 3-Step Transom Ladder is designed to allow for boarding at transom. This ladder mounts directly on the transom and telescopes into the water.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eSelf-locking brackets hold ladder secure against transom\u003c\/p\u003e\u003cp\u003eBungee cord securing strap included\u003c\/p\u003e\u003cp\u003eNylon bushings between ladder sections provide smooth deployment\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003e304 stainless steel - rated to 400 lbs.\u003c\/p\u003e\u003cp\u003eLength Deployed: 23.5\"\u003c\/p\u003e\u003cp\u003eLength Stowed: 14.75\"\u003c\/p\u003e\u003cp\u003eOverall Height: 1.5\"\u003c\/p\u003e\u003cp\u003eOverall Width: 12\"\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Garelick Telescoping 3-Step Transom Ladder used for? The Garelick Telescoping 3-Step Transom Ladder is designed for boarding at the transom. It mounts directly to the transom and telescopes into the water, providing three steps for access when boarding from the water.\u003c\/li\u003e\n\u003cli\u003eHow does the Garelick Telescoping 3-Step Transom Ladder deploy? The ladder telescopes into the water from its transom-mounted position. Nylon bushings between the ladder sections provide smooth deployment, while self-locking brackets hold the ladder securely against the transom.\u003c\/li\u003e\n\u003cli\u003eWhat is the weight capacity of the Garelick Telescoping 3-Step Transom Ladder? The Garelick Telescoping 3-Step Transom Ladder is constructed from 304 stainless steel and is rated for a boarding weight of up to 400 pounds.\u003c\/li\u003e\n\u003cli\u003eDoes the Garelick Telescoping 3-Step Transom Ladder include a securing strap? Yes. A bungee cord securing strap is included with the Garelick Telescoping 3-Step Transom Ladder. The ladder also features self-locking brackets that hold it securely against the transom.\u003c\/li\u003e\n\u003cli\u003eWhat are the dimensions of the Garelick Telescoping 3-Step Transom Ladder? The Garelick Telescoping 3-Step Transom Ladder measures 23.5 inches when deployed and 14.75 inches when stowed. It has an overall height of 1.5 inches and an overall width of 12 inches.\u003c\/li\u003e\n\u003cli\u003eHow many steps does the Garelick Telescoping Transom Ladder have? The Garelick Telescoping Transom Ladder has three steps. The ladder mounts directly to the transom and telescopes into the water for boarding access.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garelick","offers":[{"title":"Default Title","offer_id":50581673083138,"sku":"GAR-19683","price":237.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/2__48006.1763741602_408cd3ef-3c44-41c4-8d30-d1a7f68d19b3.webp?v=1791078148"},{"product_id":"garelick-telescoping-4-step-transom-ladder","title":"Garelick 4 Step Transom Mt. Ladder","description":"\u003cp\u003eGarelick Telescoping 4-Step Transom Ladder\u003c\/p\u003e\u003cp\u003eThe Garelick Telescoping 4-Step Transom Ladder is designed to allow for boarding at transom. This ladder mounts directly on the transom and telescopes into the water.\u003c\/p\u003e\u003cp\u003eSelf-locking brackets hold ladder secure against transom\u003c\/p\u003e\u003cp\u003e4 Steps allow for comfortable angled step up access under water line\u003c\/p\u003e\u003cp\u003eBungee cord securing strap included\u003c\/p\u003e\u003cp\u003eNylon bushings between ladder sections provide smooth deployment\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003e304 stainless steel - rated to 400 lbs.\u003c\/p\u003e\u003cp\u003eLength Deployed: 34.5\"\u003c\/p\u003e\u003cp\u003eLength Stowed: 14.5\"\u003c\/p\u003e\u003cp\u003eOverall Height: 1.5\"\u003c\/p\u003e\u003cp\u003eOverall Width: 12\"\u003c\/p\u003e\u003cp\u003eInstallation Instructions\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Garelick Telescoping 4-Step Transom Ladder used for? The Garelick Telescoping 4-Step Transom Ladder is designed for boarding at the transom. It mounts directly to the transom and telescopes into the water, with four angled steps that provide access below the waterline.\u003c\/li\u003e\n\u003cli\u003eHow does the Garelick Telescoping 4-Step Transom Ladder deploy? The ladder telescopes into the water from its transom-mounted position. Nylon bushings between the ladder sections provide smooth deployment, while self-locking brackets hold the ladder securely against the transom.\u003c\/li\u003e\n\u003cli\u003eWhat is the weight capacity of the Garelick Telescoping 4-Step Transom Ladder? The Garelick Telescoping 4-Step Transom Ladder is made from 304 stainless steel and is rated for a boarding weight of up to 400 pounds.\u003c\/li\u003e\n\u003cli\u003eDoes the Garelick Telescoping 4-Step Transom Ladder include a securing strap? Yes. A bungee cord securing strap is included with the Garelick Telescoping 4-Step Transom Ladder. The ladder also features self-locking brackets that hold it securely against the transom.\u003c\/li\u003e\n\u003cli\u003eWhat are the dimensions of the Garelick Telescoping 4-Step Transom Ladder? The Garelick Telescoping 4-Step Transom Ladder measures 34.5 inches when deployed and 14.5 inches when stowed. It has an overall height of 1.5 inches and an overall width of 12 inches.\u003c\/li\u003e\n\u003cli\u003eHow many steps does the Garelick Telescoping Transom Ladder have? The Garelick Telescoping Transom Ladder has four steps. The steps provide comfortable angled access below the waterline when the ladder is telescoped into the water.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garelick","offers":[{"title":"Default Title","offer_id":50581673115906,"sku":"GAR-19684","price":284.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/gar-19684-1__22743.1558181952_d9b0b069-3817-4ccf-bde0-e0fe2a005b3d.jpg?v=1791078151"},{"product_id":"garelick-over-platform-6-step-wide-telescoping-ladder","title":"Garelick 6 Step Plat. Mt. Ladder","description":"\u003cp\u003eGarelick Over-Platform 6 Step Wide Telescoping Ladder\u003c\/p\u003e\u003cp\u003eThe Garelick Over-Platform 6 Step Wide Telescoping Ladder is designed with a wide body and extra length to make it easier and more comfortable to use. This ladder is for larger boat installations at the transom platform. The steps fold over onto the platform for compact stowing. Nylon brushings between ladder sections provide precision sliding and prevents inadvertent deployment when flipping ladder body into the water.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eTwo extra steps in the water adds 24\" length\u003c\/p\u003e\u003cp\u003e6 Steps fold out and over, telescope down easily\u003c\/p\u003e\u003cp\u003eFlat poly treads for increased comfort and traction\u003c\/p\u003e\u003cp\u003eHeavy duty 6\" folding gudgeons for easy mounting\u003c\/p\u003e\u003cp\u003eBungee cord securing strap included\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003e6 Steps\u003c\/p\u003e\u003cp\u003eLength Deployed: 67.5\"\u003c\/p\u003e\u003cp\u003eLength Stowed: 19.75\"\u003c\/p\u003e\u003cp\u003eOverall Height: 2.25\"\u003c\/p\u003e\u003cp\u003eLength of Gudgeons: 6\"\u003c\/p\u003e\u003cp\u003eWeight Limit: 400 lbs.\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Garelick Over-Platform 6 Step Wide Telescoping Ladder designed for? The Garelick Over-Platform 6 Step Wide Telescoping Ladder is designed for larger boat installations at the transom platform. Its wide body and extra length provide a more comfortable boarding ladder, while the steps fold over onto the platform for compact stowing.\u003c\/li\u003e\n\u003cli\u003eHow does the Garelick Over-Platform 6 Step Wide Telescoping Ladder telescope and stow? The six steps fold out and over the platform and telescope down easily when the ladder is deployed. When stowed, the steps fold back onto the platform, reducing the ladder to a 19.75\" stowed length.\u003c\/li\u003e\n\u003cli\u003eHow long is the Garelick Over-Platform 6 Step Wide Telescoping Ladder when deployed? The Garelick Over-Platform 6 Step Wide Telescoping Ladder has a deployed length of 67.5\". Two extra steps in the water add 24\" of length, providing additional reach for larger boat transom platform installations.\u003c\/li\u003e\n\u003cli\u003eWhat features help make the Garelick 6 Step Wide Telescoping Ladder easier to use? The ladder features flat poly treads for increased comfort and traction, along with heavy-duty 6\" folding gudgeons for mounting. Nylon bushings between ladder sections provide precision sliding and help prevent inadvertent deployment when the ladder body is flipped into the water.\u003c\/li\u003e\n\u003cli\u003eWhat is the weight capacity of the Garelick Over-Platform 6 Step Wide Telescoping Ladder? The Garelick Over-Platform 6 Step Wide Telescoping Ladder has a weight limit of 400 lbs. It includes a bungee cord securing strap to help secure the ladder when it is stowed.\u003c\/li\u003e\n\u003cli\u003eWhat are the dimensions of the Garelick Over-Platform 6 Step Wide Telescoping Ladder? The ladder has six steps, a 67.5\" deployed length, a 19.75\" stowed length, and an overall height of 2.25\". The folding gudgeons are 6\" long, and the ladder has a 400-lb. weight limit.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garelick","offers":[{"title":"Default Title","offer_id":50581673181442,"sku":"GAR-19686","price":552.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/Untitled-1__05842.1757692615_02f517b9-e425-4b3a-b512-37685e66ceb4.webp?v=1791078152"},{"product_id":"garelick-compact-eez-in-ii-transom-ladder","title":"Garelick Compact Ii 3 Step Ladder","description":"\u003cp\u003eGarelick Compact EEz-In II Transom Ladder\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eCompact EEz-In II Transom Ladder\u003c\/p\u003e\u003cp\u003eHelps provide Unassisted Re- boarding\u003c\/p\u003e\u003cp\u003eInvisible, Quick \u0026amp; Easy and Readily Accessible\u003c\/p\u003e\u003cp\u003eComplete ladder stows within transom and hull\u003c\/p\u003e\u003cp\u003e3 steps open \u0026amp; close independently for ease of boarding\u003c\/p\u003e\u003cp\u003eQuick release ring w\/ self-locking latch deploys ladder from storage\u003c\/p\u003e\u003cp\u003eAnodized aluminum channel body deploys out at 15 degree angle\u003c\/p\u003e\u003cp\u003eDimensions:\u003c\/p\u003e\u003cp\u003e3 Step Compact Ladder - 32.5\" (83 cm) length\u003c\/p\u003e\u003cp\u003e2\" (5cm) square channel body\u003c\/p\u003e\u003cp\u003etransom mount plate 5\"H x 4.5\"W x 1\" D (13 x 11 x 3 cm)\u003c\/p\u003e\u003cp\u003eMounting Instructions\u003c\/p\u003e\u003cp\u003eHOW TO MOUNT GARELICK COMPACT EEZ-IN II TRANSOM LADDER\u003c\/p\u003e\u003cp\u003eMounting Instructions\u003c\/p\u003e\u003cp\u003eChoose the most suitable side of your transom for mounting the ladder. Locate a flat surface (4 ½” wide x 5” high) where the ladder will not interfere with the turning of the motor or be excessively close to the propeller of your boat.\u003c\/p\u003e\u003cp\u003eMake sure that the location will be a minimum of 4” ABOVE the waterline at the bottom of the faceplate\/assembly and in an area where there are NO electrical wires, hydraulic hoses, water hoses or steering cables.\u003c\/p\u003e\u003cp\u003eCheck to see that the transom area is sufficiently strong enough to support the ladder while it is in use. If necessary, a backing plate may need to be installed to reinforce the area.\u003c\/p\u003e\u003cp\u003eDrill a 3” diameter hole in the transom, making sure it is parallel to the waterline.\u003c\/p\u003e\u003cp\u003ePlace the ladder assembly into the hole and mark the four faceplate mounting hole’s locations.\u003c\/p\u003e\u003cp\u003eDrill the holes for appropriate 5\/16” diameter hardware (not included).\u003c\/p\u003e\u003cp\u003eNOTE: It is preferred to through-bolt the assembly for a secure installation (use locknuts and backing washers)\u003c\/p\u003e\u003cp\u003eCaulk the entire area to be mounted and insert the ladder. Secure in place with the selected mounting hardware.\u003c\/p\u003e\u003cp\u003eSecure the far end of the ladder to the boat with a strap or some other means to keep the ladder tube in place (not provided as all installations may vary).\u003c\/p\u003e\u003cp\u003eMaintenance:\u003c\/p\u003e\u003cp\u003eRegular fresh water rinsing and periodic cleaning with a mild abrasive cleaner will help retain lustre and help reduce corrosion.\u003c\/p\u003e\u003cp\u003ePeriodically check mounting hardware and re-tighten (due to normal boat operation).\u003c\/p\u003e\u003cp\u003eSafety:\u003c\/p\u003e\u003cp\u003eNever operate your boat with the ladder in “down” position. Serious injury or damage to your boat or ladder may result.\u003c\/p\u003e\u003cp\u003eInformation sourced from the Garelick 19700 Series Invisible Ladder\u003c\/p\u003e\u003cp\u003eInstallation Instructions\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Garelick Compact EEz-In II Transom Ladder used for? The Garelick Compact EEz-In II Transom Ladder is designed to provide unassisted re-boarding from the water. Its three steps open and close independently, while the complete ladder stores within the transom and hull for quick access when boarding is needed.\u003c\/li\u003e\n\u003cli\u003eHow does the Garelick Compact EEz-In II Transom Ladder deploy? A quick-release ring with a self-locking latch deploys the ladder from its stored position. The anodized aluminum channel body extends outward at a 15-degree angle, providing access to the three-step ladder for re-boarding.\u003c\/li\u003e\n\u003cli\u003eWhat are the dimensions of the Garelick Compact EEz-In II Transom Ladder? The three-step Compact EEz-In II ladder is 32.5 inches (83 cm) long and uses a 2-inch (5 cm) square channel body. The transom mount plate measures 5 inches high by 4.5 inches wide by 1 inch deep.\u003c\/li\u003e\n\u003cli\u003eWhat should I check before mounting the Garelick Compact EEz-In II Transom Ladder? Choose a flat transom surface measuring at least 4.5 inches wide by 5 inches high, with the bottom of the faceplate at least 4 inches above the waterline. Make sure the ladder will not interfere with motor turning or be excessively close to the propeller, and verify that the area contains no electrical wires, hydraulic hoses, water hoses, or steering cables.\u003c\/li\u003e\n\u003cli\u003eWhat mounting hardware is required for the Garelick Compact EEz-In II Transom Ladder? The mounting instructions call for holes sized for approp…\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garelick","offers":[{"title":"Default Title","offer_id":50581673246978,"sku":"GAR-19700","price":384.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/gar-19700_lg__19057.1558176177.jpg?v=1791078153"},{"product_id":"garelick-sport-diver-ladder","title":"Garelick Sport Diver Ladder","description":"\u003cp\u003eGarelick Sport - Diver Ladder\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eAngled design for stair-like ease of boarding\u003c\/p\u003e\u003cp\u003e2 1\/4\" diameter center vertical allows easy use with diving gear\u003c\/p\u003e\u003cp\u003eOval steps with non-skid surface\u003c\/p\u003e\u003cp\u003eHeavy duty - rated to 400 lbs. (181 kilos) boarding weight\u003c\/p\u003e\u003cp\u003eDesigned for all vertical, horizontal, and breakaway mounting hardware options\u003c\/p\u003e\u003cp\u003eStainless steel quick release transom mounting bracket (99180) and ladder storage brackets (99193) included\u003c\/p\u003e\u003cp\u003e3 Step Ladder measures 38\" long and 13\" wide\u003c\/p\u003e\u003cp\u003e4 Step Ladder measures 48\" long and 13\" wide\u003c\/p\u003e\u003cp\u003eMounting Instructions:\u003c\/p\u003e\u003cp\u003eChoose the most suitable side of transom for mounting ladder.\u003c\/p\u003e\u003cp\u003eLocate a place on the transom where the ladder will mount and not interfere with the turning and lowering operation of your motor. Determine the actual waterline when the boat is at rest. Mark this location in both the horizontal and vertical direction.\u003c\/p\u003e\u003cp\u003eLocate the ladder on this mark and slide it up to the desired mounting height. It is optimal to have at least two steps in the water for ease of boarding.\u003c\/p\u003e\u003cp\u003eMark the ladder’s potion at the top of mounting bolt.\u003c\/p\u003e\u003cp\u003eNOTE: This line will locate the top two holes for the mounting plate.\u003c\/p\u003e\u003cp\u003eCheck the inside of the transom where the mounting is proposed. Verify that there is ample space to install a backing plate (minimum size 4” x 5 ½”) that will support the ladder installation.\u003c\/p\u003e\u003cp\u003eA 4” x 5 ½” minimum flat area or the size of your backing plate is required for a secure installation.\u003c\/p\u003e\u003cp\u003eNOTE: The backing plate should be made of either aluminum, marine plywood or some other suitable non-compressive material\u003c\/p\u003e\u003cp\u003eMark four mounting plate hole locations on your transom or transom extension bracket using the plate as your template.\u003c\/p\u003e\u003cp\u003eNOTE: It may be necessary to make an external shim or modify the mounting substrate to achieve the proper ascent angle (5 to 10 degrees) for your ladder. Drill one 11\/32” or 3\/8” hole through your transom, noting the angle of the mounting substrate hole. These holes are perpendicular to the mounting face plate, not the transom. When drilling, this hole angle should be used to insure a proper installation. Place the mounting substrate and faceplate against the boat and loosely mount it with the hardware that you have selected for proper installation.\u003c\/p\u003e\u003cp\u003eLevel the bracket, mark and drill the next hole. Check the ladder for level, make adjustments if necessary and then drill the other two holes.\u003c\/p\u003e\u003cp\u003eLoosen the mounting faceplate enough to install roll pin into the mounting substrate. Place the locking bar into the substrate.\u003c\/p\u003e\u003cp\u003eNOTE: The notch in the bar faces down. Slide the locking bar’s operation to insure it slides back and stops.\u003c\/p\u003e\u003cp\u003ePut a bead of adhesive caulk around the perimeter of the mounting holes and all edges of the mounting substrate, coat the bolt threads with anti-seize compound and secure the mounting substrate in place by tightening all four mounting bolts.\u003c\/p\u003e\u003cp\u003eMount securing clips at desired location with selected stainless steel hardware. This will insure that the ladder will not rotate or slide when boat is underway.\u003c\/p\u003e\u003cp\u003eSafety:\u003c\/p\u003e\u003cp\u003eDo not use when motor is running.\u003c\/p\u003e\u003cp\u003eInformation sourced from the Garelick Installation Instructions for Sport\/Diver Ladders Technical Data\u003c\/p\u003e\u003cp\u003eInstallation Information\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Garelick Sport - Diver Ladder designed for? The Garelick Sport - Diver Ladder is designed for easier boarding with an angled, stair-like design. Its 2 1\/4\" diameter center vertical provides clearance for use with diving gear, while oval steps feature non-skid surfaces for boarding.\u003c\/li\u003e\n\u003cli\u003eHow much weight can the Garelick Sport - Diver Ladder support? The Garelick Sport - Diver Ladder is rated for a boarding weight of up to 400 lbs. (181 kilos). This heavy-duty ladder is available in 3-step and 4-step configurations.\u003c\/li\u003e\n\u003cli\u003eWhat are the dimensions of the Garelick Sport - Diver Ladder? The 3-step Garelick Sport - Diver Ladder measures 38\" lo…\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garelick","offers":[{"title":"2 Steps","offer_id":50581673312514,"sku":"GAR-19802","price":459.99,"currency_code":"USD","in_stock":true},{"title":"3 Steps","offer_id":50581673345282,"sku":"GAR-19803","price":502.49,"currency_code":"USD","in_stock":true},{"title":"4 Steps","offer_id":50581673378050,"sku":"GAR-19804","price":581.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/385532_source_1754657497.jpg?v=1791078154"},{"product_id":"garelick-bass-boat-transom-ladder-2-step","title":"Garelick Bass Boat Ladder-2 Step","description":"\u003cp\u003eGarelick 2-Step Bass Boat Transom Ladder\u003c\/p\u003e\u003cp\u003eNot only are bass boat ladders a convenience for boaters, it is also a great safety feature to have on your bass boat. Imagine an accident happening and you and your passengers ending up overboard. In the winter months, you are likely outfitted with foul weather gear that can weigh you down, trying to pull yourself back in the boat with no ladder would be nearly impossible. This is where a boat transom ladder could help. These ladders attach or hook to the stern of the boat and allow for easier re-entry back into the vessel.\u003c\/p\u003e\u003cp\u003eThe Garelick 2-Step Bass Boat Transom Ladder is a compact option with 2 steps and simply removed with its quick release mount. The steps are easy to climb and have textured treads for added safety. Installation is straightforward, and the bass boat ladder comes with hardware and brackets.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eCompact 2-step for low transoms\u003c\/p\u003e\u003cp\u003eQuick release mount for easy removal when fishing or underway\u003c\/p\u003e\u003cp\u003eEasy to climb with textured treads\u003c\/p\u003e\u003cp\u003eMeasures 28\" by 13\" with 2.25\" diameter center\u003c\/p\u003e\u003cp\u003eMounting hardware and bracket included\u003c\/p\u003e\u003cp\u003eHow to Mount a Garelick 2 Step Bass Boat Transom Ladder\u003c\/p\u003e\u003cp\u003eMounting Instructions\u003c\/p\u003e\u003cp\u003eChoose the most suitable side of the  transom for mounting the bass boat ladder.\u003c\/p\u003e\u003cp\u003eLocate a place on the transom where the ladder will mount and not interfere with the turning and lowering operation of your motor. Determine the actual waterline when the boat is at rest. Mark this location in both the horizontal and vertical direction\u003c\/p\u003e\u003cp\u003eLocate the bass boat ladder on this mark and slide it up to the desired mounting height. It is optimal to have at least two steps in the water for ease of boarding.\u003c\/p\u003e\u003cp\u003eMark the ladder’s potion at the top of mounting bolt.\u003c\/p\u003e\u003cp\u003eNOTE: This line will locate the top two holes for the mounting plate.\u003c\/p\u003e\u003cp\u003eCheck the inside of the transom where the mounting is proposed. Verify that there is ample space to install a backing plate (minimum size 4” x 5 ½”) that will support the ladder installation\u003c\/p\u003e\u003cp\u003eA 4” x 5 ½” minimum flat area or the size of your backing plate is required for a secure installation.\u003c\/p\u003e\u003cp\u003eNOTE: The backing plate should be made of either aluminum, marine plywood or some other suitable non-compressive material\u003c\/p\u003e\u003cp\u003eMark four mounting plate hole locations on your transom or transom extension bracket using the plate as your template.\u003c\/p\u003e\u003cp\u003eNOTE: It may be necessary to make an external shim or modify the mounting substrate to achieve the proper ascent angle (5 to 10 degrees) for your ladder. Drill one 11\/32” or 3\/8” hole through your transom, noting the angle of the mounting substrate hole. These holes are perpendicular to the mounting face plate, not the transom. When drilling, this hole angle should be used to insure a proper installation. Place the mounting substrate and faceplate against the boat and loosely mount it with the hardware that you have selected for proper installation.\u003c\/p\u003e\u003cp\u003eLevel the bracket, mark and drill the next hole. Check the ladder for level, make adjustments if necessary and then drill the other two holes.\u003c\/p\u003e\u003cp\u003eLoosen the mounting faceplate enough to install roll pin into the mounting substrate. Place the locking bar into the substrate.\u003c\/p\u003e\u003cp\u003eNOTE: The notch in the bar faces down. Slide the locking bar’s operation to insure it slides back and stops.\u003c\/p\u003e\u003cp\u003ePut a bead of adhesive caulk around the perimeter of the mounting holes and all edges of the mounting substrate, coat the bolt threads with anti-seize compound and secure the mounting substrate in place by tightening all four mounting bolts.\u003c\/p\u003e\u003cp\u003eMount securing clips at desired location with selected stainless steel hardware. This will insure that the ladder will not rotate or slide when boat is underway.\u003c\/p\u003e\u003cp\u003eSafety:\u003c\/p\u003e\u003cp\u003eDo not use when motor is running.\u003c\/p\u003e\u003cp\u003eInformation sourced from the Garelick Installation Instructions for Bass Boat Ladders Technical Data\u003c\/p\u003e\u003cp\u003eClick to Download Garelick Bass Boat Transom Ladder Installati…\u003c\/p\u003e","brand":"Garelick","offers":[{"title":"Default Title","offer_id":50581673443586,"sku":"GAR-19812","price":400.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/gar-19812_lg__16814.1558117180_6826abc1-97e3-4331-a862-4e031c7ace9d.webp?v=1791078155"},{"product_id":"garelick-stainless-steel-sport-diver-ladder","title":"Garelick Stainless Steel Sport Diver Ladder","description":"\u003cp\u003eStainless Steel Sport and Dive Ladder\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eSuperior corrosion resistance electropolished stainless steel\u003c\/p\u003e\u003cp\u003eEasy Boarding for Swimmers or Divers with fins or heavy gear\u003c\/p\u003e\u003cp\u003e1 3\/4\" diameter center post design - angled mount for stair-like usability\u003c\/p\u003e\u003cp\u003eHeavy Duty - rated to 400 lbs. (181kg) boarding weight\u003c\/p\u003e\u003cp\u003eComfortable non-skid step surface\u003c\/p\u003e\u003cp\u003eDesigned for all vertical, horizontal, and breakaway mounting hardware options\u003c\/p\u003e\u003cp\u003eStainless Quick Release Transom mounting bracket (99180) included\u003c\/p\u003e\u003cp\u003eOptional storage brackets (99196) available\u003c\/p\u003e\u003cp\u003eIncludes mounting brackets\u003c\/p\u003e\u003cp\u003e250lb weight limit\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003e3 Step - L: 37” (94cm), W: 14.5” (37cm)\u003c\/p\u003e\u003cp\u003e4 Step - L: 48” (122cm), W: 14.5” (37cm)\u003c\/p\u003e\u003cp\u003eMounting Instructions:\u003c\/p\u003e\u003cp\u003eChoose the most suitable side of transom for mounting ladder.\u003c\/p\u003e\u003cp\u003eLocate a place on the transom where the ladder will mount and not interfere with the turning and lowering operation of your motor. Determine the actual waterline when the boat is at rest. Mark this location in both the horizontal and vertical direction.\u003c\/p\u003e\u003cp\u003eLocate the ladder on this mark and slide it up to the desired mounting height. It is optimal to have at least two steps in the water for ease of boarding.\u003c\/p\u003e\u003cp\u003eMark the ladder’s potion at the top of mounting bolt.\u003c\/p\u003e\u003cp\u003eNOTE: This line will locate the top two holes for the mounting plate.\u003c\/p\u003e\u003cp\u003eCheck the inside of the transom where the mounting is proposed. Verify that there is ample space to install a backing plate (minimum size 4” x 5 ½”) that will support the ladder installation.\u003c\/p\u003e\u003cp\u003eA 4” x 5 ½” minimum flat area or the size of your backing plate is required for a secure installation.\u003c\/p\u003e\u003cp\u003eNOTE: The backing plate should be made of either aluminum, marine plywood or some other suitable non-compressive material\u003c\/p\u003e\u003cp\u003eMark four mounting plate hole locations on your transom or transom extension bracket using the plate as your template.Level the bracket, mark and drill the next hole. Check the ladder for level, make adjustments if necessary and then drill the other two holes.\u003c\/p\u003e\u003cp\u003eNOTE: It may be necessary to make an external shim or modify the mounting substrate to achieve the proper ascent angle (5 to 10 degrees) for your ladder. Drill one 11\/32” or 3\/8” hole through your transom, noting the angle of the mounting substrate hole. These holes are perpendicular to the mounting face plate, not the transom. When drilling, this hole angle should be used to insure a proper installation. Place the mounting substrate and faceplate against the boat and loosely mount it with the hardware that you have selected for proper installation.\u003c\/p\u003e\u003cp\u003eLoosen the mounting faceplate enough to install roll pin into the mounting substrate. Place the locking bar into the substrate.\u003c\/p\u003e\u003cp\u003eNOTE: The notch in the bar faces down. Slide the locking bar’s operation to insure it slides back and stops.\u003c\/p\u003e\u003cp\u003ePut a bead of adhesive caulk around the perimeter of the mounting holes and all edges of the mounting substrate, coat the bolt threads with anti-seize compound and secure the mounting substrate in place by tightening all four mounting bolts.\u003c\/p\u003e\u003cp\u003eMount securing clips at desired location with selected stainless steel hardware. This will insure that the ladder will not rotate or slide when boat is underway.\u003c\/p\u003e\u003cp\u003eSafety:\u003c\/p\u003e\u003cp\u003eDo not use when motor is running.\u003c\/p\u003e\u003cp\u003eInformation sourced from the Garelick Installation Instructions for Sport\/Diver Ladders Technical Data\u003c\/p\u003e\u003cp\u003eInstallation Instructions\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Stainless Steel Sport and Dive Ladder used for? The Stainless Steel Sport and Dive Ladder is designed for boarding by swimmers or divers, including those wearing fins or carrying heavy gear. Its angled mount provides stair-like usability, while the non-skid step surface is designed for comfortable boarding.\u003c\/li\u003e\n\u003cli\u003eWhat are the available sizes for the Stainless Steel Sport and Dive Ladder? The Stainless Steel Sport and Dive Ladder is available in 3-step and 4-step con…\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garelick","offers":[{"title":"3 Steps","offer_id":50581673509122,"sku":"GAR-19833","price":536.49,"currency_code":"USD","in_stock":true},{"title":"4 Steps","offer_id":50581673541890,"sku":"GAR-19834","price":682.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/392874_source_1756135747.jpg?v=1791078156"},{"product_id":"garelick-telescoping-stainless-steel-sport-diver-ladder","title":"Garelick Telescoping Stainless Steel Sport Diver Ladder","description":"\u003cp\u003eGarelick Telescoping Stainless Steel Sport\/Diver Ladder\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eComfortable non-skid step surface\u003c\/p\u003e\u003cp\u003eStainless Quick Release Transom Mounting Bracket (99180) included\u003c\/p\u003e\u003cp\u003eEasy boarding for swimmers or divers with fins and heavy gear\u003c\/p\u003e\u003cp\u003eDual 1.25\" (3cm) center post design - angled mount for stairlike usability\u003c\/p\u003e\u003cp\u003eHeavy Duty - rated to 400 lbs (181kg) boarding weight\u003c\/p\u003e\u003cp\u003eSuperior corrosion resistant electropolished stainless steel\u003c\/p\u003e\u003cp\u003eDimensions:\u003c\/p\u003e\u003cp\u003e3 Step:\u003c\/p\u003e\u003cp\u003eLength: 34\" (86cm)\u003c\/p\u003e\u003cp\u003eWidth: 13.5\" (34cm)\u003c\/p\u003e\u003cp\u003eFolded up for storage: 17\" (43cm)\u003c\/p\u003e\u003cp\u003e4 Step:\u003c\/p\u003e\u003cp\u003eLength: 42\" (107cm)\u003c\/p\u003e\u003cp\u003eWidth: 13.5\" (34cm)\u003c\/p\u003e\u003cp\u003eFolded up for storage: 19.5\" (50cm)\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Garelick Telescoping Stainless Steel Sport\/Diver Ladder used for? The Garelick Telescoping Stainless Steel Sport\/Diver Ladder is designed to provide easier boarding for swimmers or divers, including those wearing fins or carrying heavy gear. Its angled dual-post design provides stairlike usability, while the non-skid steps offer a comfortable boarding surface.\u003c\/li\u003e\n\u003cli\u003eWhat is the weight capacity of the Garelick Sport\/Diver Ladder? The Garelick Telescoping Stainless Steel Sport\/Diver Ladder is rated for a maximum boarding weight of 400 pounds (181 kg). This heavy-duty ladder is designed for boarding by swimmers and divers.\u003c\/li\u003e\n\u003cli\u003eWhat is the Garelick Telescoping Sport\/Diver Ladder made from? The ladder is constructed from electropolished stainless steel for corrosion resistance. It features a dual 1.25-inch (3 cm) center post design and an angled mount intended to provide stairlike usability.\u003c\/li\u003e\n\u003cli\u003eDoes the Garelick Telescoping Stainless Steel Sport\/Diver Ladder include a mounting bracket? Yes. A stainless Quick Release Transom Mounting Bracket, model 99180, is included. The quick-release bracket is part of the ladder's mounting system and allows the ladder to be removed from its mounting position.\u003c\/li\u003e\n\u003cli\u003eWhat are the dimensions of the Garelick Sport\/Diver Ladder? The 3-step version measures 34 inches long by 13.5 inches wide and folds to 17 inches for storage. The 4-step version measures 42 inches long by 13.5 inches wide and folds to 19.5 inches for storage.\u003c\/li\u003e\n\u003cli\u003eHow does the Garelick Sport\/Diver Ladder help with boarding? The Garelick ladder features comfortable non-skid step surfaces and an angled dual center-post design for stairlike usability. It is specifically designed to make boarding easier for swimmers and divers who may be wearing fins or carrying heavy gear.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garelick","offers":[{"title":"3 Step","offer_id":50581673607426,"sku":"GAR-19843","price":735.99,"currency_code":"USD","in_stock":true},{"title":"4 Step","offer_id":50581673640194,"sku":"GAR-19844","price":894.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/gar-19843_lg__57344.1558176230.jpg?v=1791078158"},{"product_id":"garelick-millenium-series-seat-slide-system-ribbed-series","title":"Garelick Seat Slide Lh-Pol Ribbed","description":"\u003cp\u003eGarelick Millenium Series - Seat Slide System - Ribbed Series\u003c\/p\u003e\u003cp\u003eLooking for a reliable seat slide system for your boat? The Garelick Millennium Series Ribbed Seat Slide delivers smooth, wobble-free performance with 6 inches of fore and aft travel. This low-profile design features heavy-duty anodized aluminum construction with a standard 5\"x12\" hole pattern for easy installation. The Positive Lock Spider rotates a full 360° with internal cup engagement at 10° increments, while the internal Delrin cup ensures gaul-free operation. Available in left- or right-hand operation with plain or powder coated finishes, this system meets ABYC-H31 Type A standards and includes all necessary retaining hardware.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eLow profile design allows 360° of rotation and 6\" of smooth, wobble-free fore and aft travel\u003c\/p\u003e\u003cp\u003eHeavy duty anodized aluminum slide plate has standard 5\"x12\" hole pattern to accommodate standard seat mounting holes\u003c\/p\u003e\u003cp\u003ePositive Lock Spider – rotates 360°, internal cup engages in 10° increments for positive stop lock (Secondary twist control offers variable drag adj. and can be tightened to lock in place)\u003c\/p\u003e\u003cp\u003eInternal Delrin cup provides smooth, gaul-free operation.\u003c\/p\u003e\u003cp\u003eAvailable in either left- or right-hand operation\u003c\/p\u003e\u003cp\u003eMeets ABYC-H31, Type A Standards \u0026amp; Garelick performance standards\u003c\/p\u003e\u003cp\u003eIncludes retaining hardware (99302)\u003c\/p\u003e\u003cp\u003ePlain or powder coated finish\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003e20000 : Positive Lock Slider \u0026amp; Spider Combination Left Hand Lever Plain Finish\u003c\/p\u003e\u003cp\u003eInstallation Instructions\u003c\/p\u003e","brand":"Garelick","offers":[{"title":"Default Title","offer_id":50581673705730,"sku":"GAR-20000","price":225.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/gar-20000_lg__47580.1558174925.jpg?v=1791078159"},{"product_id":"garelick-stainless-steel-toggle-bolt-anchors-pair","title":"Garelick Toggle Bolt Anchor Pair","description":"\u003cp\u003eGarelick Stainless Steel Toggle Bolt Anchors - Package of 2\u003c\/p\u003e\u003cp\u003ePositively secures seats and table bases to decks or any accessory to cabin walls. Made of 304 Stainless Steel. Saves time and labor - Provides added strength. Add reinforced safety and comfort to pedestal installations. Works with all Garelick Seat Pedestal Bases.\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eFor deck or cabin thickness from 3\/8\" to 3 5\/8\"\u003c\/p\u003e\u003cp\u003eRequires 1\/2\" (13mm) holes\u003c\/p\u003e\u003cp\u003e2 each, 1\/4\"-20 size screws\/bolts\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat are Garelick Stainless Steel Toggle Bolt Anchors used for? Garelick Stainless Steel Toggle Bolt Anchors are designed to secure seats and table bases to decks or accessories to cabin walls. They can also add reinforcement to pedestal installations and work with all Garelick Seat Pedestal Bases.\u003c\/li\u003e\n\u003cli\u003eWhat are Garelick Toggle Bolt Anchors made from? These toggle bolt anchors are made from 304 stainless steel and are designed to provide added strength for seat pedestal and accessory installations.\u003c\/li\u003e\n\u003cli\u003eWhat deck or cabin thickness can these Garelick Toggle Bolt Anchors accommodate? The anchors are designed for deck or cabin thicknesses from 3\/8\" to 3-5\/8\", providing a range of installation options for compatible applications.\u003c\/li\u003e\n\u003cli\u003eWhat size hole is required to install Garelick Stainless Steel Toggle Bolt Anchors? Installation requires 1\/2\" (13mm) holes. The package includes two 1\/4\"-20 size screws or bolts.\u003c\/li\u003e\n\u003cli\u003eHow many Garelick Stainless Steel Toggle Bolt Anchors are included? The package contains two 304 stainless steel toggle bolt anchors with two 1\/4\"-20 size screws or bolts.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garelick","offers":[{"title":"Default Title","offer_id":50581673771266,"sku":"GAR-21022","price":30.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/gar-21022_lg__93570.1558114437.webp?v=1791078159"},{"product_id":"garelick-stainless-steel-toggle-bolt-anchors-6pk","title":"Garelick Toggle Bolt Mount Kit (6Pk)","description":"\u003cp\u003eGarelick Stainless Steel Toggle Bolt Anchors - Package of 6\u003c\/p\u003e\u003cp\u003ePositively secures seats and table bases to decks or any accessory to cabin walls. Made of 304 Stainless Steel. Saves time and labor - Provides added strength. Add reinforced safety and comfort to pedestal installations. Works with all Garelick Seat Pedestal Bases.\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eFor deck or cabin thickness from 3\/8\" to 3 5\/8\"\u003c\/p\u003e\u003cp\u003eRequires 1\/2\" (13mm) holes\u003c\/p\u003e\u003cp\u003eTakes 1\/4\"-20 size thread\u003c\/p\u003e\u003cp\u003eDoes not include additional hardware\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat are the Garelick Stainless Steel Toggle Bolt Anchors used for? The Garelick Stainless Steel Toggle Bolt Anchors are designed to secure seats and table bases to decks or accessories to cabin walls. They can also provide added strength for pedestal installations and work with all Garelick Seat Pedestal Bases.\u003c\/li\u003e\n\u003cli\u003eWhat are the Garelick Stainless Steel Toggle Bolt Anchors made from? The Garelick Stainless Steel Toggle Bolt Anchors are made from 304 stainless steel. The package contains six toggle bolt anchors for securing seats, table bases, or other accessories in the specified applications.\u003c\/li\u003e\n\u003cli\u003eWhat deck or cabin thickness can the Garelick Toggle Bolt Anchors accommodate? The Garelick Stainless Steel Toggle Bolt Anchors are designed for deck or cabin thicknesses from 3\/8\" to 3 5\/8\". Verify the thickness of the installation surface before using these anchors.\u003c\/li\u003e\n\u003cli\u003eWhat size holes are required for the Garelick Stainless Steel Toggle Bolt Anchors? The Garelick Stainless Steel Toggle Bolt Anchors require 1\/2\" (13mm) holes for installation. They use a 1\/4\"-20 thread size.\u003c\/li\u003e\n\u003cli\u003eAre additional hardware components included with the Garelick Stainless Steel Toggle Bolt Anchors? No. The Garelick Stainless Steel Toggle Bolt Anchors package does not include additional hardware. The supplied product description specifies that the package contains six stainless steel toggle bolt anchors.\u003c\/li\u003e\n\u003cli\u003eDo the Garelick Toggle Bolt Anchors work with Garelick Seat Pedestal Bases? Yes. The Garelick Stainless Steel Toggle Bolt Anchors are specified to work with all Garelick Seat Pedestal Bases and can be used to provide added strength for pedestal installations.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garelick","offers":[{"title":"Default Title","offer_id":50581673836802,"sku":"GAR-21026","price":70.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/21021_3__14793.1739459104.webp?v=1791078161"},{"product_id":"garelick-millennium-series-seat-slide-system-smooth-series-left-hand-lever","title":"Garelick O-E Swivel-Slide-3.5\" L.H.","description":"\u003cp\u003eGarelick Millennium Series - Seat Slide System - Smooth Series\u003c\/p\u003e\u003cp\u003eThe Garelick Millennium Smooth Series Seat Slide with left-hand lever delivers reliable performance for boat seating applications. This system features a low-profile design that provides 360-degree rotation with 10-degree increment locking and 6 inches of wobble-free fore and aft travel. Built from heavy-duty anodized aluminum with a powder-coated finish, the slide plate includes a standard 5\"x12\" hole pattern for universal seat compatibility. The positive lock spider mechanism with internal Delrin cup ensures smooth operation, while the secondary twist control offers variable drag adjustment. Adding just 1\/2 inch to pedestal height, this ABYC-H31 Type A compliant system includes all necessary retaining hardware for straightforward installation.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eLow profile design allows 360° of rotation and 6\" of smooth, wobble-free fore and aft travel\u003c\/p\u003e\u003cp\u003eHeavy duty anodized aluminum slide plate has standard 5\"x12\" hole pattern to accommodate standard seat mounting holes\u003c\/p\u003e\u003cp\u003ePositive Lock Spider - rotates 360°, internal cup engages in 10° increments for positive stop lock (Secondary twist control offers variable drag adj. and can be tightened to lock in place)\u003c\/p\u003e\u003cp\u003eInternal Delrin cup provides smooth, gaul-free operation.\u003c\/p\u003e\u003cp\u003eAvailable in either left- or right-hand operation\u003c\/p\u003e\u003cp\u003eMeets ABYC-H31, Type A Standards \u0026amp; Garelick performance standards\u003c\/p\u003e\u003cp\u003eIncludes retaining hardware (99302)\u003c\/p\u003e\u003cp\u003ePowder coated finish\u003c\/p\u003e\u003cp\u003eSLIDE : High tensile aluminum profile extrusion 13.75\" x 8\" (35cm x 20cm) plate, mounting hole pattern 5\" x 12\" (13cm x 30cm), Fore and Aft travel 6\" (15cm)\u003c\/p\u003e\u003cp\u003eSWIVEL : High tensile aluminum 2 7\/8\" (7cm) diameter, plastic internal cup. All stainless hardware.\u003c\/p\u003e\u003cp\u003eInstallation Instructions\u003c\/p\u003e","brand":"Garelick","offers":[{"title":"Default Title","offer_id":50581673902338,"sku":"GAR-22000","price":292.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/gar-22000_lg__88482.1558140059_e8b3bcad-5926-491d-b0cb-a77052ebeb1e.jpg?v=1791078162"},{"product_id":"garelick-millennium-series-seat-slide-system-smooth-series-right-hand-lever","title":"Garelick O-E Swivel-Slide-3.5\" R.H.","description":"\u003cp\u003eGarelick Millennium Series - Seat Slide System - Smooth Series\u003c\/p\u003e\u003cp\u003eAdds 1\/2\" (1.25cm) to Pedestal height. Features:\u003c\/p\u003e\u003cp\u003eLow profile design allows 360° of rotation and 6\" of smooth, wobble-free fore and aft travel\u003c\/p\u003e\u003cp\u003eHeavy duty anodized aluminum slide plate has standard 5\"x12\" hole pattern to accommodate standard seat mounting holes\u003c\/p\u003e\u003cp\u003ePositive Lock Spider - rotates 360°, internal cup engages in 10° increments for positive stop lock (Secondary twist control offers variable drag adj. and can be tightened to lock in place)\u003c\/p\u003e\u003cp\u003eInternal Delrin cup provides smooth, gaul-free operation.\u003c\/p\u003e\u003cp\u003eAvailable in either left- or right-hand operation\u003c\/p\u003e\u003cp\u003eMeets ABYC-H31, Type A Standards \u0026amp; Garelick performance standards\u003c\/p\u003e\u003cp\u003eIncludes retaining hardware (99302)\u003c\/p\u003e\u003cp\u003ePowder coated finish\u003c\/p\u003e\u003cp\u003eSLIDE : High tensile aluminum profile extrusion 13.75\" x 8\" (35cm x 20cm) plate, mounting hole pattern 5\" x 12\" (13cm x 30cm), Fore and Aft travel 6\" (15cm)\u003c\/p\u003e\u003cp\u003eSWIVEL : High tensile aluminum 2 7\/8\" (7cm) diameter, plastic internal cup. All stainless hardware.\u003c\/p\u003e\u003cp\u003eInstallation Instructions\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Garelick Millennium Series Seat Slide System used for? The Garelick Millennium Series Seat Slide System adds 1\/2\" to pedestal height while providing 360° rotation and 6\" of smooth, wobble-free fore and aft seat travel. Its low-profile design combines a seat slide with a positive-lock swivel for adjustable boat seating.\u003c\/li\u003e\n\u003cli\u003eHow much fore and aft adjustment does the Garelick Millennium Seat Slide System provide? The Garelick Millennium Series Seat Slide System provides 6\" of fore and aft travel. The high-tensile aluminum slide plate measures 13.75\" x 8\" and uses a 5\" x 12\" mounting hole pattern for standard seat mounting holes.\u003c\/li\u003e\n\u003cli\u003eDoes the Garelick Millennium Seat Slide System rotate? Yes. The Garelick Millennium Series Seat Slide System provides 360° rotation. Its Positive Lock Spider has an internal cup that engages in 10° increments for positive stop locking, while a secondary twist control provides variable drag adjustment and can be tightened to lock the swivel in place.\u003c\/li\u003e\n\u003cli\u003eWhat type of seat mounting pattern does the Garelick Millennium Seat Slide System use? The heavy-duty anodized aluminum slide plate has a standard 5\" x 12\" mounting hole pattern designed to accommodate standard seat mounting holes. Verify your seat's mounting pattern before selecting this seat slide system.\u003c\/li\u003e\n\u003cli\u003eWhat materials and hardware are used in the Garelick Millennium Seat Slide System? The slide uses a high-tensile aluminum profile extrusion, while the 2-7\/8\" diameter swivel uses a plastic internal Delrin cup. The system also includes all stainless steel hardware and retaining hardware identified as 99302. The product has a powder-coated finish.\u003c\/li\u003e\n\u003cli\u003eDoes the Garelick Millennium Seat Slide System meet ABYC standards? Yes. The Garelick Millennium Series Seat Slide System meets ABYC-H31, Type A Standards and Garelick performance standards. It is available for either left-hand or right-hand operation, allowing the operating side to be selected for the seating application.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garelick","offers":[{"title":"Default Title","offer_id":50581673967874,"sku":"GAR-22001","price":250.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/gar-21000_large_1__47004.1558140113_82978dba-5247-4f06-b746-d15499e439b3.jpg?v=1791078163"},{"product_id":"garelick-28-oak-cockpit-steps","title":"Garelick Cockpit Step 28\" Oak","description":"\u003cp\u003eGarelick 28\" Oak Cockpit Steps\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eFor stepping up or down from cockpit of all types of cruisers\u003c\/p\u003e\u003cp\u003eAttaches to inside of coaming with stainless steel Shur- loc catches included (76000)\u003c\/p\u003e\u003cp\u003eDurable 1\" (3cm) anodized aluminum uprights and stamped support brackets\u003c\/p\u003e\u003cp\u003eVarnished oak traction grooved steps\u003c\/p\u003e\u003cp\u003eDimensions:\u003c\/p\u003e\u003cp\u003e25028: 28\" H x 16\" W x 5.5\" D\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat are the Garelick 28\" Oak Cockpit Steps designed for? The Garelick 28\" Oak Cockpit Steps are designed to help boaters step up or down from the cockpit of cruisers. They attach to the inside of the coaming and provide varnished oak, traction-grooved steps supported by anodized aluminum uprights and stamped brackets.\u003c\/li\u003e\n\u003cli\u003eWhat are the dimensions of the Garelick 28\" Oak Cockpit Steps? The Garelick 28\" Oak Cockpit Steps measure 28 inches high, 16 inches wide, and 5.5 inches deep. These dimensions apply to model 25028.\u003c\/li\u003e\n\u003cli\u003eWhat materials are used to construct the Garelick cockpit steps? The Garelick cockpit steps feature durable 1-inch anodized aluminum uprights and stamped support brackets. The steps are made from varnished oak and have traction grooves to provide the specified step surface.\u003c\/li\u003e\n\u003cli\u003eHow do the Garelick 28\" Cockpit Steps attach to the boat? The steps attach to the inside of the boat's coaming using stainless steel Shur-Loc catches. The required Shur-Loc catches are included with the 28-inch cockpit steps.\u003c\/li\u003e\n\u003cli\u003eAre the Garelick 28\" Oak Cockpit Steps suitable for different types of cruisers? Yes. The product description states that these cockpit steps are designed for stepping up or down from the cockpit of all types of cruisers. The specified model is 25028.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garelick","offers":[{"title":"Default Title","offer_id":50581674033410,"sku":"GAR-25028","price":454.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/gar-25028_lg__75808.1558174951_63cf9a25-e678-42d4-88a2-a22559cb1b52.jpg?v=1791078164"},{"product_id":"garelick-oak-footrest","title":"Garelick Footrest 15\" Oak","description":"\u003cp\u003eGarelick Oak Footrest\u003c\/p\u003e\u003cp\u003eGarelick Oak Footrest mounts on vertical surfaces and can be used with helm seats or pilot chairs for added comfort. It features stamped aluminum folding side brackets and a varnished oak traction-grooved step.\u003c\/p\u003e\u003cp\u003eAvailable Sizes\u003c\/p\u003e\u003cp\u003e15\"\u003c\/p\u003e\u003cp\u003e18\"\u003c\/p\u003e","brand":"Garelick","offers":[{"title":"Default Title","offer_id":50581674098946,"sku":"GAR-26015","price":175.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/gar-26018_lg__62058.1558174983_4c5aa072-96db-4ef7-b939-a62c0979cfd2.webp?v=1791078164"},{"product_id":"garelick-black-vinyl-footrest","title":"Garelick Footrest Blk Anod Vinyl","description":"\u003cp\u003eGarelick Black Vinyl Footrest\u003c\/p\u003e\u003cp\u003eGarelick durable black vinyl footrest.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003e1\" black anodized aluminum uprights\u003c\/p\u003e\u003cp\u003eStamped support brackets\u003c\/p\u003e\u003cp\u003eBlack vinyl treads\u003c\/p\u003e\u003cp\u003eDimensions:\u003c\/p\u003e\u003cp\u003e7.5” H x 15” W x 8.25” D (19x38x21cm)\u003c\/p\u003e","brand":"Garelick","offers":[{"title":"Default Title","offer_id":50581674131714,"sku":"GAR-27315","price":272.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/gar-27315_lg__51622.1558175037_1ada8971-ea85-459c-aff1-36649ff3c378.jpg?v=1791078165"},{"product_id":"garelick-rounded-white-vinyl-footrest","title":"Garelick Footrest 15\" Vinyl Tread","description":"\u003cp\u003eGarelick Rounded White Vinyl Footrest\u003c\/p\u003e\u003cp\u003eFeatures:Heavy duty wrap around aluminum extrusion with brushed anodized aluminum finish and white vinyl treads\u003c\/p\u003e\u003cp\u003eDimensions:\u003c\/p\u003e\u003cp\u003e7.5” H x 15” W x 8.25” D (19x38x21cm)\u003c\/p\u003e","brand":"Garelick","offers":[{"title":"Default Title","offer_id":50581674262786,"sku":"GAR-27316","price":317.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/gar-27316_lg__61531.1558175066_ceff20b1-1353-4c42-86c6-080d511dc1fb.jpg?v=1791078166"},{"product_id":"garelick-rounded-white-polymer-footrest","title":"Garelick Footrest White Poly","description":"\u003cp\u003eGarelick Rounded White Polymer Footrest\u003c\/p\u003e\u003cp\u003eHeavy duty wrap-around aluminum extrusion with brushed anodized aluminum finish\u003c\/p\u003e\u003cp\u003eHigh density polyethylene traction grooved step\u003c\/p\u003e\u003cp\u003eDimensions: 7.5\"H X 15\"W X 8.25\"D\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Garelick Rounded White Polymer Footrest used for? The Garelick Rounded White Polymer Footrest provides a durable footrest with a heavy-duty wrap-around aluminum extrusion and a high-density polyethylene traction-grooved step. Its construction provides a stable surface for use where a marine footrest is needed.\u003c\/li\u003e\n\u003cli\u003eWhat materials are used in the Garelick Rounded White Polymer Footrest? The footrest features a heavy-duty wrap-around aluminum extrusion with a brushed anodized aluminum finish and a high-density polyethylene step. The step includes traction grooves for its surface.\u003c\/li\u003e\n\u003cli\u003eWhat are the dimensions of the Garelick Rounded White Polymer Footrest? The Garelick Rounded White Polymer Footrest measures 7.5 inches high, 15 inches wide, and 8.25 inches deep.\u003c\/li\u003e\n\u003cli\u003eDoes the Garelick Rounded White Polymer Footrest have a traction-grooved step? Yes. The footrest uses a high-density polyethylene step with traction grooves, providing a textured stepping surface as part of its design.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garelick","offers":[{"title":"Default Title","offer_id":50581674328322,"sku":"GAR-27415","price":325.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/gar-27415_lg__46670.1558114469_805abc3d-4954-48d1-b4d0-562b227e7c9d.jpg?v=1791078167"},{"product_id":"garelick-teak-footrest","title":"Garelick Footrest-Alum Teak","description":"\u003cp\u003eGarelick Teak Footrest\u003c\/p\u003e\u003cp\u003eHeavy duty wrap around aluminum extrusion with brushed anodized aluminum finish and teak inserts.\u003c\/p\u003e\u003cp\u003eDimensions: 7.5” H x 15” W x 8.25” D (19x38x21cm)\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Garelick Teak Footrest used for? The Garelick Teak Footrest provides a footrest surface with a heavy-duty wrap-around aluminum extrusion and teak inserts. Its brushed anodized aluminum finish is designed for a durable marine application.\u003c\/li\u003e\n\u003cli\u003eWhat is the Garelick Teak Footrest made from? The Garelick Teak Footrest features a heavy-duty aluminum extrusion with a brushed anodized aluminum finish and teak inserts.\u003c\/li\u003e\n\u003cli\u003eWhat are the dimensions of the Garelick Teak Footrest? The Garelick Teak Footrest measures 7.5\" high, 15\" wide, and 8.25\" deep, or approximately 19 x 38 x 21 cm.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garelick","offers":[{"title":"Default Title","offer_id":50581674426626,"sku":"GAR-27515","price":332.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/gar-27515_lg__76165.1558139439_95bd84fd-1478-477b-a618-ac842bc3217a.jpg?v=1791078169"},{"product_id":"garelick-adjustable-footrest-with-teak-insert","title":"Garelick Adj Footrest Teak Inserts","description":"\u003cp\u003eGarelick Adjustable Footrest with Teak Insert\u003c\/p\u003e\u003cp\u003eAdjustable Footrest is made of heavy duty wrap around aluminum extrusion with brushed anodized aluminum finish and teak treads. Modern styling. Provides added comfort for multiple users at helm. 4 positions - provides 5\" of vertical height adjustment. Angled 18 degrees down for more comfort when resting on stepping surface. Traction grooved step surface with teak inserts. Rounded corner design helps eliminate scraping ankles.\u003c\/p\u003e\u003cp\u003eDimensions:\u003c\/p\u003e\u003cp\u003e7.5\" H x 15\" W x 8.25\" D (19x38x21cm)\u003c\/p\u003e","brand":"Garelick","offers":[{"title":"Default Title","offer_id":50581674590466,"sku":"GAR-27516","price":433.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/gar-27516_lg__35276.1558140226.jpg?v=1791078170"},{"product_id":"garelick-49-251-gas-spring","title":"Garelick Gas Spring","description":"\u003cp\u003eGarelick 49-251 Gas Spring\u003c\/p\u003e\u003cp\u003eThe 49-251 is a replacement gas spring for Garelick products.\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Garelick 49-251 Gas Spring used for? The Garelick 49-251 Gas Spring is a replacement gas spring designed for Garelick products.\u003c\/li\u003e\n\u003cli\u003eIs the Garelick 49-251 Gas Spring a replacement part? Yes. The Garelick 49-251 Gas Spring is specifically identified as a replacement gas spring for Garelick products.\u003c\/li\u003e\n\u003cli\u003eWhat products is the Garelick 49-251 Gas Spring compatible with? The supplied product information states that the Garelick 49-251 Gas Spring is a replacement for Garelick products, but it does not specify particular models or applications. Verify the required part number before purchasing.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garelick","offers":[{"title":"Default Title","offer_id":50581674721538,"sku":"GAR-49-251","price":234.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/GAR-49-251.2__77486.1722510328_12d8ae27-9025-422c-93d3-f621e04100b9.jpg?v=1791078172"},{"product_id":"garelick-standard-fixed-length-boat-hooks","title":"Garelick Standard Fixed Length Boat Hooks","description":"\u003cp\u003eGarelick Aluminum Boat Hook\u003c\/p\u003e\u003cp\u003eFeatures a ribbed hook and body for extra strength with a wide gap for large objects. Equipped with a premium red cushioned tip and a large surface for fending off lines and stanchions. The guaranteed unbreakable hook is constructed of a non-corrosive, glass reinforced nylon, UV resistant U.S. Patent #338602. Garelick boat hooks extend your reach and they float! A necessity when docking, launching, retrieving or mooring the lightweight, durable aluminum is well balanced for maximum strength.\u003c\/p\u003e\u003cp\u003eIt floats!\u003c\/p\u003e\u003cp\u003eComes with a clear satin finish and a premium grip\u003c\/p\u003e\u003cp\u003eHooks are permanently attached with uniquely formed dimples\u003c\/p\u003e\u003cp\u003eThe high tensile anodized aluminum tube resists corrosion\u003c\/p\u003e\u003cp\u003eComfortable non-slip vinyl safety grip is permanently attached as a handle\u003c\/p\u003e\u003cp\u003e1\" Diameter on all lengths\u003c\/p\u003e","brand":"Garelick","offers":[{"title":"Default Title","offer_id":50581674787074,"sku":"GAR-55004","price":47.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/gar-55006_lg__31429.1558143735.jpg?v=1791078175"},{"product_id":"garelick-premium-telescoping-aluminum-boat-hook","title":"Garelick Telescoping Boat Hook 3-1\/2-8'","description":"\u003cp\u003eGarelick Premium Telescoping Aluminum Boat Hook\u003c\/p\u003e\u003cp\u003eFeatures premium poly vinyl, mar-resistant tips with a wide gap for large objects. Equipped with a premium red cushioned tip with a large surface for fending off lines and stanchions. Garelick boat hooks extend your reach.  A necessity when docking, launching, retrieving or mooring the lightweight, durable aluminum is well balanced for maximum strength. The smooth telescoping twist lock with rolled tube edge guarantees ease of use, comfort, and maximum strength.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eComes with a clear satin finish, premium grip\u003c\/p\u003e\u003cp\u003eHooks are permanently attached with uniquely formed dimples\u003c\/p\u003e\u003cp\u003eThe high tensile anodized aluminum tube resists corrosion\u003c\/p\u003e\u003cp\u003eComfortable non-slip vinyl safety grip permanently attached as a handle\u003c\/p\u003e\u003cp\u003eDiameter: 1 1\/8\"-1 1\/4\"\u003c\/p\u003e\u003cp\u003e3 Sections\u003c\/p\u003e\u003cp\u003eSizes Available:\u003c\/p\u003e\u003cp\u003e3.5' - 8'\u003c\/p\u003e\u003cp\u003e4' - 7.5'\u003c\/p\u003e\u003cp\u003e4.5' - 12'\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Garelick Premium Telescoping Aluminum Boat Hook used for? The Garelick Premium Telescoping Aluminum Boat Hook provides extended reach for docking, launching, retrieving, and mooring. Its lightweight aluminum construction is designed for strength and balance, while the telescoping design allows the boat hook to be adjusted to the available length.\u003c\/li\u003e\n\u003cli\u003eWhat sizes are available for the Garelick Premium Telescoping Aluminum Boat Hook? The Garelick Premium Telescoping Aluminum Boat Hook is available in three sizes: 3.5 to 8 feet, 4 to 7.5 feet, and 4.5 to 12 feet. Each version uses a three-section telescoping design.\u003c\/li\u003e\n\u003cli\u003eWhat is the Garelick boat hook made from? The boat hook uses high-tensile anodized aluminum tubing designed to resist corrosion. It has a clear satin finish and a permanently attached non-slip vinyl safety grip. The construction is lightweight while providing strength for common boat-handling tasks.\u003c\/li\u003e\n\u003cli\u003eHow does the telescoping adjustment work on the Garelick boat hook? The Garelick Premium Telescoping Aluminum Boat Hook uses a smooth telescoping twist-lock design. The rolled tube edge is designed to provide ease of use, comfort, and maximum strength when adjusting the boat hook.\u003c\/li\u003e\n\u003cli\u003eWhat type of tip does the Garelick Premium Boat Hook have? The boat hook features premium poly vinyl, mar-resistant tips with a wide gap for handling larger objects. It also has a red cushioned tip with a large surface designed for fending off lines and stanchions. The hooks are permanently attached using uniquely formed dimples.\u003c\/li\u003e\n\u003cli\u003eWhat is the diameter of the Garelick Premium Telescoping Aluminum Boat Hook? The Garelick Premium Telescoping Aluminum Boat Hook has a diameter ranging from 1-1\/8 to 1-1\/4 inches. It uses three telescoping sections and includes a permanently attached non-slip vinyl safety grip for handling.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garelick","offers":[{"title":"Default Title","offer_id":50581674852610,"sku":"GAR-55170","price":65.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/Untitled-1__24311.1754597537_4fde415c-3ecb-4350-8230-906137db57e1.jpg?v=1791078176"},{"product_id":"garelick-60-1001-i-beam","title":"Garelick 60.1001 I-BEAM","description":"\u003cp\u003eGarelick 60-1001 I-Beam Ladder Insert\u003c\/p\u003e\u003cp\u003eThe 60-1001 is a genuine replacement I-Beam for Garelick EEZ-IN Integrated Transom ladders. Part #19902 3 Step Model\u003c\/p\u003e\u003cp\u003eIncludes Pin for installation.\u003c\/p\u003e","brand":"Garelick","offers":[{"title":"Default Title","offer_id":50581674950914,"sku":"GAR-60-1001","price":565.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/GAR-60-1001__09602.1767892181.jpg?v=1791078177"},{"product_id":"garelick-60-1137-pull-pin-assembly","title":"Garelick Pull Pin Assy","description":"\u003cp\u003eGarelick 60-1137 Pull Pin Assembly\u003c\/p\u003e\u003cp\u003eThe 60-1137 is a genuine relacement pull pin assembly for Garelick Eez-In I-Beam's.\u003c\/p\u003e","brand":"Garelick","offers":[{"title":"Default Title","offer_id":50581675016450,"sku":"GAR-60-1137","price":39.69,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/GAR-60-1137__80789.1722383556_9f139cb1-4b8c-41d7-b755-82915c360d50.webp?v=1791078178"},{"product_id":"garelick-60-993-i-beam","title":"Garelick I-Beam For Gar-19902-34","description":"\u003cp\u003eGarelick 60-993 I-Beam\u003c\/p\u003e\u003cp\u003eThe 60-1001 is a genuine replacement I-Beam for Garelick EEZ-IN Transom ladders.\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Garelick 60-993 I-Beam used for? The Garelick 60-993 I-Beam is a genuine replacement I-Beam for Garelick EEZ-IN Transom ladders.\u003c\/li\u003e\n\u003cli\u003eWhat ladders is the Garelick 60-993 I-Beam compatible with? The Garelick 60-993 I-Beam is designed as a replacement component for Garelick EEZ-IN Transom ladders.\u003c\/li\u003e\n\u003cli\u003eIs the Garelick 60-993 I-Beam a genuine replacement part? Yes. The product description identifies the Garelick 60-993 I-Beam as a genuine replacement I-Beam for EEZ-IN Transom ladders.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garelick","offers":[{"title":"Default Title","offer_id":50581675114754,"sku":"GAR-60-993","price":647.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/GAR-60-993__43031.1722385043.webp?v=1791078179"},{"product_id":"garelick-universal-boat-seat-swivel-e-z-mount-75018","title":"Garelick E-Z-Mount Seat Swivel","description":"\u003cp\u003eGarelick E-Z Mount Universal Seat Swivel\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eRotates 360 degrees - fits most standard seat hole patterns\u003c\/p\u003e\u003cp\u003eSelf-lubricated, non-corrosive poly swivel bearings\u003c\/p\u003e\u003cp\u003e\"Easy Mount\" - Larger bottom half exposes four mounting holes\u003c\/p\u003e\u003cp\u003eTemplate \u0026amp; Mounting Instructions\u003c\/p\u003e","brand":"Garelick","offers":[{"title":"Default Title","offer_id":50581675180290,"sku":"GAR-75018","price":70.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/gar-75018_lg__73723.1558138577.jpg?v=1791078180"},{"product_id":"garelick-stainless-steel-seat-swivel-75020","title":"Garelick Stainless Seat Swivel","description":"\u003cp\u003eGarelick Stainless Steel Seat Swivel\u003c\/p\u003e\u003cp\u003eThe Garelick Stainless Steel Seat Swivel 75020 delivers heavy-duty performance for offshore applications. Built with 304 stainless steel construction and a stainless center rivet, this 7\" x 7\" swivel provides reliable 360° rotation while resisting corrosion in marine environments. Self-lubricated poly swivel bearings ensure smooth operation without maintenance. The universal design fits most standard hole patterns, making installation straightforward on various boat seats. Wholesale Marine stocks this durable Garelick swivel at competitive prices with dependable service for boaters seeking quality marine hardware.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eHeavy Duty for Offshore Market\u003c\/p\u003e\u003cp\u003e304 Stainless Steel with stainless center rivet\u003c\/p\u003e\u003cp\u003eRotates 360° - Fits most Standard Hole Patterns\u003c\/p\u003e\u003cp\u003eSelf lubricated non-corrosive poly swivel bearings\u003c\/p\u003e\u003cp\u003e7\" x 7\" (18 x 18cm)\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Garelick Stainless Steel Seat Swivel 75020? The Garelick Stainless Steel Seat Swivel 75020 is a heavy-duty marine seat swivel designed for offshore applications. It features 304 stainless steel construction with a stainless center rivet, 360° rotation, and self-lubricated poly swivel bearings for smooth operation without maintenance.\u003c\/li\u003e\n\u003cli\u003eDoes the Garelick 75020 Seat Swivel rotate 360 degrees? Yes. The Garelick Stainless Steel Seat Swivel 75020 provides 360° rotation, allowing the boat seat to turn fully around the swivel. Its self-lubricated poly swivel bearings are designed to provide smooth operation without requiring maintenance.\u003c\/li\u003e\n\u003cli\u003eWhat material is the Garelick Stainless Steel Seat Swivel made from? The Garelick 75020 Seat Swivel is constructed from 304 stainless steel and includes a stainless center rivet. The product description states that its stainless steel construction provides corrosion resistance for marine environments.\u003c\/li\u003e\n\u003cli\u003eWhat size is the Garelick Stainless Steel Seat Swivel 75020? The Garelick Stainless Steel Seat Swivel 75020 measures 7 inches by 7 inches, or approximately 18 by 18 centimeters. Verify the available mounting space and hole pattern on your boat seat before installation.\u003c\/li\u003e\n\u003cli\u003eWill the Garelick 75020 Seat Swivel fit my boat seat? The Garelick Stainless Steel Seat Swivel 75020 is designed to fit most standard boat seat mounting hole patterns. Since the product description does not provide specific hole dimensions, verify your seat's existing mounting pattern before installation.\u003c\/li\u003e\n\u003cli\u003eDo the Garelick 75020 swivel bearings require maintenance? The Garelick 75020 uses self-lubricated, non-corrosive poly swivel bearings. These bearings are designed to provide smooth operation without maintenance, according to the supplied product description.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garelick","offers":[{"title":"Default Title","offer_id":50581675278594,"sku":"GAR-75020","price":65.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/gar-75020_lg__19420.1558138707_e4a5d895-3948-424e-ba5e-b09a1eef0ad5.jpg?v=1791078181"},{"product_id":"garelick-75025s-adjustable-table-base-pedestal","title":"Garelick Adjustable Table Base 14.5 30.25\"","description":"\u003cp\u003eGarelick 75025S Adjustable Table Base Pedestal\u003c\/p\u003e\u003cp\u003eThis adjustable table base from Garelick easily converts dinettes to berths. The cast aluminum construction provides excellent marine corrosion resistance. A polished aluminum finish will spruce up any vessel. This table base pedestal is able to be adjusted from 15\" up to 30\".\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eConverts dinettes to berths\u003c\/p\u003e\u003cp\u003e9\"(23cm) diameter cast aluminum base on each end for support\u003c\/p\u003e\u003cp\u003e2.875\" (7cm) smooth stanchion tube\u003c\/p\u003e\u003cp\u003eIn lower position inside tube goes below deck 6\" (15cm)\u003c\/p\u003e\u003cp\u003eLocks any height from 15\" to 30\"\u003c\/p\u003e\u003cp\u003ePolished Finish. Smooth. Tube protrudes 6\" (15cm) below deck\u003c\/p\u003e\u003cp\u003eTable Pedestal Mounting Instructions\u003c\/p\u003e\u003cp\u003eLocate a place for the mounting pedestal. Ensure there is an open 6\" below the deck and no cables or reinforcement ribs are in the mounting area.\u003c\/p\u003e\u003cp\u003eSet the pedestal on the deck where it will be mounted. Unscrew the locking knob to allow the pedestal to slide. While holding down the inside tube assembly, slide the outside tube up in order to trace around the inside tube. While still holding the inside assembly, slide the outside tube assembly back down to the deck and mark the 6 mounting holes.\u003c\/p\u003e\u003cp\u003eCut the center circle in deck. This hole is for the inner tube when the pedestal is in the lower position\u003c\/p\u003e\u003cp\u003eDrill the six mounting holes in the deck using the proper bit that is compatible with the selected fasteners. NOTE: Fasteners are not provided\u003c\/p\u003e\u003cp\u003ePlace the pedestal on the deck and align the holes in the base with the holes in the deck. Check the pedestal for proper up and down travel\u003c\/p\u003e\u003cp\u003eSecure the pedestal to the boat deck. This area should be adequately reinforced. Use a backing plate if necessary to make a secure attachment. It is recommended that the fasteners go though both the deck and backing plate for best results.\u003c\/p\u003e\u003cp\u003eTable Attachment Instructions\u003c\/p\u003e\u003cp\u003eLoosen, but do not remove, the locking knob in order to slide the inside tube out of the assembly.\u003c\/p\u003e\u003cp\u003eMount the table to the top base using the appropriate fasteners\u003c\/p\u003e\u003cp\u003eSlide the inside tube back into the assembly. The lock block attached to the knob will need to be aligned with the track on the inside tube.\u003c\/p\u003e\u003cp\u003eOnce inserted, secure the pedestal at the desired height using the tightening knob.\u003c\/p\u003e\u003cp\u003eClick here for Garelick 75025S Adjustable Table Base Installation Instructions\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Garelick 75025S Adjustable Table Base Pedestal used for? The Garelick 75025S Adjustable Table Base Pedestal is designed to convert dinettes to berths. Its adjustable design allows the pedestal to lock at any height from 15\" to 30\", providing flexibility for the table position.\u003c\/li\u003e\n\u003cli\u003eWhat is the Garelick 75025S Table Base Pedestal made from? The Garelick 75025S Adjustable Table Base Pedestal features cast aluminum construction with a polished aluminum finish. It has a 9\" diameter cast aluminum base on each end and a 2.875\" smooth stanchion tube.\u003c\/li\u003e\n\u003cli\u003eHow much can the Garelick 75025S Table Pedestal be adjusted? The Garelick 75025S Table Pedestal adjusts from 15\" to 30\" and can be locked at any height within that range. In the lower position, the inside tube protrudes 6\" below the deck.\u003c\/li\u003e\n\u003cli\u003eWhat should I check before installing the Garelick 75025S Adjustable Table Base Pedestal? Before installation, ensure there is an open 6\" area below the deck and that there are no cables or reinforcement ribs in the mounting area. The mounting area should also be adequately reinforced, with a backing plate used if necessary for a secure attachment.\u003c\/li\u003e\n\u003cli\u003eAre fasteners included with the Garelick 75025S Table Pedestal? No. Fasteners are not provided with the Garelick 75025S Adjustable Table Base Pedestal. The supplied installation instructions specify using fasteners appropriate for the deck and mounting application.\u003c\/li\u003e\n\u003cli\u003eHow is a table attached to the Garelick 75025S Pedestal? To attach a table, loosen the locking knob and slide the inside tube out of the assembly. Mount the table to the top base using appropriate fasteners, then slide the inside tube…\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garelick","offers":[{"title":"Default Title","offer_id":50581675376898,"sku":"GAR-75025S","price":327.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/Garelick-75025S-Adjustable-Table-Pedestal__42201.1737844391.webp?v=1791078182"},{"product_id":"garelick-detachable-stanchion-plate","title":"Garelick Solid Detachable Stanchion Plate","description":"\u003cp\u003eGarelick Detachable Stanchion Plate 75056-GS\u003c\/p\u003e\u003cp\u003eThe Garelick Detachable Stanchion Plate mounts to the deck surface for base attachment.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eAllows base and seat to be removed\u003c\/p\u003e\u003cp\u003e9.25\" diameter machined anodized aluminum\u003c\/p\u003e\u003cp\u003eAdapts to all models, simply enlarge 6 base holes to 7\/16\" diameter\u003c\/p\u003e\u003cp\u003eAdds reinforced safety and comfort to pedestal installations\u003c\/p\u003e\u003cp\u003eIncludes:\u003c\/p\u003e\u003cp\u003ePlate\u003c\/p\u003e\u003cp\u003e3 Stainless cap screws\u003c\/p\u003e\u003cp\u003eAllen wrench\u003c\/p\u003e\u003cp\u003eInstructions\u003c\/p\u003e","brand":"Garelick","offers":[{"title":"Default Title","offer_id":50581675442434,"sku":"GAR-75056-GS","price":77.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/75056__91167.1722355542_010cbdef-dd0f-464e-9ac8-2ffc2fb8e7e0.webp?v=1791078183"},{"product_id":"garelick-75080-low-profile-seat-slide-6-travel","title":"Garelick Seat Slide 6\" Travel","description":"\u003cp\u003eGarelick Low Profile Seat Slide - 6\" Travel\u003c\/p\u003e\u003cp\u003eLow profile seat slide allows helm or boat seat to adjust fore and aft. Convenient handle provides solid locking at any position. Compatible with most 360 degree sliders. Anodized aluminum with stainless steel hardware. Mounts between seat and pedestal base. 8.5\"W X 8\"L. Wobble-free design and operation.\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Garelick Low Profile Seat Slide - 6\" Travel used for? The Garelick Low Profile Seat Slide allows a helm or boat seat to adjust forward and backward. It mounts between the seat and pedestal base and provides 6 inches of travel for positioning the seat.\u003c\/li\u003e\n\u003cli\u003eHow does the Garelick Low Profile Seat Slide lock into position? The seat slide uses a convenient handle that provides solid locking at any position along its travel range. This allows the helm or boat seat to be adjusted fore and aft and secured in the desired position.\u003c\/li\u003e\n\u003cli\u003eWhat are the dimensions of the Garelick Low Profile Seat Slide? The Garelick Low Profile Seat Slide measures 8.5 inches wide by 8 inches long and provides 6 inches of travel.\u003c\/li\u003e\n\u003cli\u003eWhat is the Garelick Low Profile Seat Slide made of? The Garelick Low Profile Seat Slide is made of anodized aluminum and uses stainless steel hardware. Its design provides wobble-free operation.\u003c\/li\u003e\n\u003cli\u003eIs the Garelick Low Profile Seat Slide compatible with 360 degree sliders? Yes. The product description states that the Garelick Low Profile Seat Slide is compatible with most 360 degree sliders. It mounts between the boat seat and pedestal base.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garelick","offers":[{"title":"Default Title","offer_id":50581675639042,"sku":"GAR-75080","price":213.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/gar-75080__04194.1722478568_98d53315-c364-424c-bf47-addd1548ee51.jpg?v=1791078184"},{"product_id":"garelick-low-profile-seat-slide-7-travel","title":"Garelick Seat Slide 7\" Travel","description":"\u003cp\u003eGarelick Low Profile Seat Slide - 7\" Travel\u003c\/p\u003e\u003cp\u003eLow profile seat slide allows helm or boat seat to adjust fore and aft. Convenient handle provides solid locking at any position. Compatible with most 360 degree sliders. Anodized aluminum with stainless steel hardware. Mounts between seat and pedestal base. 13\"L X 8.5\"W. Wobble-free design and operation.\u003c\/p\u003e\u003cp\u003eAssembly \u0026amp; Installation Instructions\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Garelick Low Profile Seat Slide - 7\" Travel? The Garelick Low Profile Seat Slide - 7\" Travel is a boat seat slide that allows a helm or boat seat to adjust fore and aft. It mounts between the seat and pedestal base and features a low-profile, wobble-free design with a convenient locking handle.\u003c\/li\u003e\n\u003cli\u003eHow much adjustment does the Garelick Low Profile Seat Slide provide? This Garelick seat slide provides 7\" of fore-and-aft travel, allowing the helm or boat seat to be repositioned forward or backward. The convenient handle provides solid locking at any position along the slide.\u003c\/li\u003e\n\u003cli\u003eWhere does the Garelick 7\" seat slide mount? The Garelick Low Profile Seat Slide mounts between the boat seat and pedestal base. Its 13\" length and 8.5\" width provide the mounting platform for the seat adjustment system.\u003c\/li\u003e\n\u003cli\u003eIs the Garelick Low Profile Seat Slide compatible with 360° sliders? Yes. The Garelick Low Profile Seat Slide is compatible with most 360° sliders. Verify the dimensions and mounting arrangement of your existing seating components before installation to ensure compatibility.\u003c\/li\u003e\n\u003cli\u003eWhat materials are used in the Garelick Low Profile Seat Slide? The Garelick Low Profile Seat Slide is constructed from anodized aluminum with stainless steel hardware. This construction is combined with a low-profile design and wobble-free operation for boat seating applications.\u003c\/li\u003e\n\u003cli\u003eDoes the Garelick 7\" seat slide lock in position? Yes. The slide has a convenient handle that provides solid locking at any position. This allows the boat or helm seat to be secured after making a fore-and-aft adjustment.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garelick","offers":[{"title":"Default Title","offer_id":50581675737346,"sku":"GAR-75081","price":223.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/gar-75081_large__42514.1558117001.jpg?v=1791078185"},{"product_id":"garelick-standard-series-seat-slide-and-swivel-75083","title":"Garelick Seat Slide And Swivel 7\"-2 7\/8","description":"\u003cp\u003eGarelick Standard Series Seat Slide and Swivel 75083S\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eProvides smooth fore and aft travel and 360° seat rotation\u003c\/p\u003e\u003cp\u003eAdds comfort and stability for any swivel boat seat\u003c\/p\u003e\u003cp\u003eMounts underneath seat and on top of pedestal stanchion\u003c\/p\u003e\u003cp\u003eCompatible with any 2 7\/8\"(7cm) diameter tube\u003c\/p\u003e\u003cp\u003eConvenient handles provide solid locking at any position\u003c\/p\u003e\u003cp\u003eMeets ABYC-H31, Type A Standards \u0026amp; Garelick performance standards\u003c\/p\u003e\u003cp\u003eAnodized aluminum for added protection from saltwater corrosion and weathering\u003c\/p\u003e\u003cp\u003eIncludes retaining hardware (99300) to prevent inadvertent detachment\u003c\/p\u003e\u003cp\u003e7\" (18cm) Fore and Aft Travel 8.5\" W x 13\" L (22cm x 33cm) Required on Roto molded Seat Models (Includes 75081 \u0026amp; 99023)\u003c\/p\u003e\u003cp\u003eAdds 1 5\/8\" (4cm) to height. Hole Pattern: 5\" x 12\" (13x30cm)\u003c\/p\u003e\u003cp\u003eAssembly \u0026amp; Installation Instructions\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Garelick Standard Series Seat Slide and Swivel 75083S used for? The Garelick Standard Series Seat Slide and Swivel 75083S provides smooth fore and aft seat travel and 360° rotation for swivel boat seats. It mounts underneath the seat and on top of the pedestal stanchion, adding 1-5\/8\" to the seating height.\u003c\/li\u003e\n\u003cli\u003eHow much travel does the Garelick Standard Series Seat Slide and Swivel 75083S provide? The Garelick Standard Series Seat Slide and Swivel 75083S provides 7\" of fore and aft travel. Convenient handles allow the seat to lock securely at any position within the slide's travel range.\u003c\/li\u003e\n\u003cli\u003eWhat pedestal tube is compatible with the Garelick 75083S Seat Slide and Swivel? The Garelick Standard Series Seat Slide and Swivel 75083S is compatible with any 2-7\/8\" diameter tube. Verify that your pedestal stanchion has the specified tube diameter before selecting this seat slide and swivel.\u003c\/li\u003e\n\u003cli\u003eWhat mounting hole pattern does the Garelick 75083S Seat Slide and Swivel use? The Garelick Standard Series Seat Slide and Swivel 75083S has a 5\" x 12\" mounting hole pattern. The unit measures 8.5\" wide by 13\" long, so verify the mounting dimensions against your boat seat before installation.\u003c\/li\u003e\n\u003cli\u003eIs the Garelick Standard Series Seat Slide and Swivel suitable for saltwater use? The Garelick Standard Series Seat Slide and Swivel 75083S is made from anodized aluminum for added protection from saltwater corrosion and weathering. It also meets ABYC-H31, Type A Standards and Garelick performance standards.\u003c\/li\u003e\n\u003cli\u003eDoes the Garelick 75083S Seat Slide and Swivel include retaining hardware? Yes. The Garelick Standard Series Seat Slide and Swivel 75083S includes retaining hardware, part number 99300, designed to prevent inadvertent detachment. The product description also notes that retaining hardware is included with the assembly.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garelick","offers":[{"title":"Default Title","offer_id":50581675835650,"sku":"GAR-75083S","price":285.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/gar-75083_lg__46981.1558138837_de5dc739-3cad-4017-a857-d1353840c17e.jpg?v=1791078186"},{"product_id":"garelick-low-profile-seat-slide-and-locking-swivel-75090","title":"Garelick Seat Slide And Lock Swivel 6\"","description":"\u003cp\u003eGarelick Low Profile Seat Slide and Locking Swivel\u003c\/p\u003e\u003cp\u003eGarelick's Low Profile Seat Slide and Locking Swivel (75090) mounts directly between your helm or boat seat and pedestal base, providing 7.5 inches of fore and aft travel for optimal positioning. The convenient handle locks securely at any position along the 6-inch travel range, while the wobble-free design ensures stable operation. Constructed from anodized aluminum with stainless steel hardware, this slide measures 8.5\" W x 8\" L x 4\" H and works with most 360° spiders. Compatible with standard wood or plastic seats. Spider swivel casting sold separately.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eAllows helm or boat seats to adjust fore and aft\u003c\/p\u003e\u003cp\u003eSlide mounts under seat in between seat and pedestal base\u003c\/p\u003e\u003cp\u003eConvenient handle provides solid locking at any position\u003c\/p\u003e\u003cp\u003eCompatible with most 360° spiders\u003c\/p\u003e\u003cp\u003eWobble-Free Design\/Operation\u003c\/p\u003e\u003cp\u003e6\" Travel, standard size for wood or plastic seats\u003c\/p\u003e\u003cp\u003eAnodized aluminum with stainless steel hardware. Spider swivel casting not included\u003c\/p\u003e\u003cp\u003eSpecifications: 7.5\" (19cm) Fore and Aft Travel 8.5\" W x 8\" L x 4\" H (22cm x 20cm x 10cm)\u003c\/p\u003e\u003cp\u003eAssembly \u0026amp; Installation Instructions\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Garelick Low Profile Seat Slide and Locking Swivel used for? The Garelick Low Profile Seat Slide and Locking Swivel (75090) mounts between a boat seat or helm seat and the pedestal base. It provides fore and aft seat adjustment for positioning, with a locking handle that secures the seat at the desired position.\u003c\/li\u003e\n\u003cli\u003eHow much travel does the Garelick Low Profile Seat Slide and Locking Swivel provide? The Garelick Low Profile Seat Slide and Locking Swivel provides 7.5 inches of fore and aft travel. The product also specifies 6 inches of travel as the standard size for wood or plastic seats.\u003c\/li\u003e\n\u003cli\u003eHow does the locking mechanism work on the Garelick Low Profile Seat Slide and Locking Swivel? The slide features a convenient handle that locks the seat securely at any position along the travel range. Its wobble-free design is intended to provide stable operation while adjusting and using the seat.\u003c\/li\u003e\n\u003cli\u003eWhat seats and swivel spiders are compatible with the Garelick Low Profile Seat Slide and Locking Swivel? The slide is compatible with standard wood or plastic seats and works with most 360° spiders. The spider swivel casting is sold separately, so verify that your existing components are compatible before installation.\u003c\/li\u003e\n\u003cli\u003eWhat are the dimensions and materials of the Garelick Low Profile Seat Slide and Locking Swivel? The slide measures 8.5 inches wide by 8 inches long by 4 inches high. It is constructed from anodized aluminum and uses stainless steel hardware for its marine seating application.\u003c\/li\u003e\n\u003cli\u003eIs the spider swivel casting included with the Garelick Low Profile Seat Slide and Locking Swivel? No. The spider swivel casting is not included with the Garelick Low Profile Seat Slide and Locking Swivel. The product description specifies that the casting is sold separately.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garelick","offers":[{"title":"Default Title","offer_id":50581675966722,"sku":"GAR-75090","price":278.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/gar-75090_lg__39479.1558138896.webp?v=1791078187"},{"product_id":"garelick-low-profile-seat-slide-5-travel","title":"Garelick Low Profile Seat Slide 5\" Travel","description":"\u003cp\u003eGarelick Low Profile Seat Slide\u003c\/p\u003e\u003cp\u003eAllows helm or boat seats to adjust fore and aft\u003c\/p\u003e\u003cp\u003eSlide mounts under seat in between seat and pedestal base\u003c\/p\u003e\u003cp\u003eConvenient handle provides solid locking at any position\u003c\/p\u003e\u003cp\u003eCompatible with most 360° spiders\u003c\/p\u003e\u003cp\u003eWobble-Free Design\/Operation\u003c\/p\u003e\u003cp\u003eAnodized aluminum with stainless steel hardware\u003c\/p\u003e\u003cp\u003eSpider swivel casting (99023, 99036) not included\u003c\/p\u003e\u003cp\u003eFull Length Size for roto-molded seats 5\" (13cm) Fore and Aft Travel\u003c\/p\u003e\u003cp\u003e8.5\" W x 13\" L x 1.63\" H (22cm x 33cm x 4cm)\u003c\/p\u003e\u003cp\u003eFor Low Profile installations where slide mounts directly to deck.\u003c\/p\u003e\u003cp\u003eLock handle is angled upward\u003c\/p\u003e\u003cp\u003eAssembly \u0026amp; Installation Instructions\u003c\/p\u003e","brand":"Garelick","offers":[{"title":"Default Title","offer_id":50581676065026,"sku":"GAR-75091","price":240.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/gar-75091_lg__62444.1558139947_d9ba3e63-983c-4fdb-b604-4b954869e7f1.jpg?v=1791078188"}],"url":"https:\/\/allmarineworld.com\/collections\/garelick.oembed?page=3","provider":"All Marine World","version":"1.0","type":"link"}