{"title":"Ezy-Glide","description":"\u003cp\u003eEzy-Glide products currently published by All Marine World.\u003c\/p\u003e","products":[{"product_id":"ezy-glide-ezy-stik-iii-model-870-mechanical-steering-kit","title":"Ezy-Glide EZY-Stik III Model 870 Mechanical Steering Kit","description":"\u003cp\u003eEZY-Glide EZY-Stik III Model 870 Mechanical Steering Kit\u003c\/p\u003e\u003cp\u003eThe Ezy-Stik III has incorporated many of the outstanding and time proven features of the Model 840. These great features include a one piece stainless steel drive spool, and reinforced composite housing. The Model 870 has been developed due to the increased demand for a system with quicker response and shorter lock-to-lock travel distance. The quicker turning ratio provides a faster response and a shorter travel distance from lock to lock.\u003c\/p\u003e\u003cp\u003eDue to the fact that 4-stroke engines transfer more negative torque feedback to the operator, if the engine is a 4-stroke over 40 HP, the Ezy-Stik II Model 840 should be considered over the Model 870. Although the 870 has a horsepower rating of 70HP\/90HP Jet, it is not recommended for 4-stroke engines over 40 HP.\u003c\/p\u003e\u003cp\u003eThis system is rated for:\u003c\/p\u003e\u003cp\u003eOutboard engines not to exceed 70 HP\u003c\/p\u003e\u003cp\u003eJet drives not to exceed 90 HP\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eTotal lever movement: 44.8 inches\/161 degrees\u003c\/p\u003e\u003cp\u003eSteering ratio: 5.0\/1\u003c\/p\u003e\u003cp\u003eHousing dimensions: Approx. 7-1\/2\" x 7-1\/2\"\u003c\/p\u003e\u003cp\u003eLever length: 16\"\u003c\/p\u003e\u003cp\u003eHow to Measure a New System or Replacement Cable Length from EZY-Glide\u003c\/p\u003e\u003cp\u003eMeasure from the center of the helm position to the center of the engine.\u003c\/p\u003e\u003cp\u003eAdd 8\" to this measurement.\u003c\/p\u003e\u003cp\u003eRound up your system length measurement to the nearest 1\/2 foot. (For example, a 12'2\" measurement would order a 12-1\/2' cable)\u003c\/p\u003e\u003cp\u003eClick to Download EZY-Stik III Model 870 Installation Instructions\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the EZY-Glide EZY-Stik III Model 870 Mechanical Steering Kit used for? The EZY-Glide EZY-Stik III Model 870 is a mechanical steering system designed for outboard engines up to 70 HP and jet drives up to 90 HP. Its quicker steering ratio provides faster response and shorter lock-to-lock travel compared with systems designed with a slower turning ratio.\u003c\/li\u003e\n\u003cli\u003eWhat horsepower engines are compatible with the EZY-Glide EZY-Stik III Model 870? The Model 870 is rated for outboard engines not exceeding 70 HP and jet drives not exceeding 90 HP. However, it is not recommended for 4-stroke engines over 40 HP because these engines transfer more negative torque feedback to the operator.\u003c\/li\u003e\n\u003cli\u003eWhy does the EZY-Glide Model 870 provide quicker steering response? The Model 870 was developed with a quicker turning ratio to provide faster steering response and a shorter travel distance from lock to lock. Its steering ratio is 5.0:1, with total lever movement of 44.8 inches and 161 degrees.\u003c\/li\u003e\n\u003cli\u003eWhat are the main construction features of the EZY-Glide EZY-Stik III Model 870? The EZY-Stik III Model 870 incorporates a one-piece stainless steel drive spool and reinforced composite housing. The housing measures approximately 7-1\/2 inches by 7-1\/2 inches, and the lever length is 16 inches.\u003c\/li\u003e\n\u003cli\u003eHow do I determine the correct cable length for the EZY-Glide Model 870? Measure from the center of the helm position to the center of the engine, then add 8 inches. Round the resulting system length up to the nearest 1\/2 foot. For example, a measurement of 12 feet 2 inches would require ordering a 12-1\/2-foot cable.\u003c\/li\u003e\n\u003cli\u003eWhat should I consider before choosing the EZY-Glide Model 870 for a 4-stroke engine? If the outboard is a 4-stroke engine over 40 HP, the Model 870 is not recommended even though its overall rating reaches 70 HP. The product description recommends considering the Ezy-Stik II Model 840 instead for 4-stroke engines over 40 HP.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ezy-Glide","offers":[{"title":"10'","offer_id":50581650833666,"sku":"EZG-870-1000","price":532.99,"currency_code":"USD","in_stock":true},{"title":"10.5'","offer_id":50581650866434,"sku":"EZG-870-1050","price":532.99,"currency_code":"USD","in_stock":true},{"title":"11'","offer_id":50581650899202,"sku":"EZG-870-1100","price":532.99,"currency_code":"USD","in_stock":true},{"title":"11.5'","offer_id":50581650931970,"sku":"EZG-870-1150","price":532.99,"currency_code":"USD","in_stock":true},{"title":"12'","offer_id":50581650964738,"sku":"EZG-870-1200","price":532.99,"currency_code":"USD","in_stock":true},{"title":"12.5'","offer_id":50581650997506,"sku":"EZG-870-1250","price":532.99,"currency_code":"USD","in_stock":true},{"title":"13'","offer_id":50581651030274,"sku":"EZG-870-1300","price":532.99,"currency_code":"USD","in_stock":true},{"title":"13.5'","offer_id":50581651063042,"sku":"EZG-870-1350","price":532.99,"currency_code":"USD","in_stock":false},{"title":"14'","offer_id":50581651095810,"sku":"EZG-870-1400","price":532.99,"currency_code":"USD","in_stock":false},{"title":"14.5'","offer_id":50581651128578,"sku":"EZG-870-1450","price":532.99,"currency_code":"USD","in_stock":true},{"title":"15'","offer_id":50581651161346,"sku":"EZG-870-1500","price":532.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/870-1000__31049.1737852679_0e5e6547-cc8d-47cd-9648-cbbcfc652739.jpg?v=1791077960"},{"product_id":"ezy-glide-hydra-stik-2500-hydraulic-stick-steering-system","title":"Ezy-Glide Hydra-Stik 2500 Hydraulic Stick Steering System with 2.8 turns from lock-to-lock","description":"\u003cp\u003eEZY-Glide Hydra-Stik 2500 Hydraulic Stick Steering System\u003c\/p\u003e\u003cp\u003eEZY-Glide's Hydra-Stick Hydraulic Steering System provides the convenience of stick steering but delivers on the power and ease of hydraulics. Their hydraulic system is designed similarly to the mechanical steering sticks and has many of the same benefits. However, it has the added advantage of smoother steering with no feedback. There are fewer turns from lock to lock at only 2.8. This means the operator is only turning 1.4 turns to move from center position to a right or left turn.\u003c\/p\u003e\u003cp\u003eInstallation for the Hydra-Stick Hydraulic steering system can be done on either the port or starboard side of the vessel. Console mounting is also an option. There is a hydraulic helm pump, hydraulic hoses with fittings, universal hydraulic cylinder, bezel, lever,  hydraulic fluid and installation manual included in your kit.  Recommended for use with outboards up to 90 HP and jet drives 110 HP.\u003c\/p\u003e\u003cp\u003eHydra-Stik 2500 Steering System Includes:\u003c\/p\u003e\u003cp\u003eHydraulic helm pump\u003c\/p\u003e\u003cp\u003e20' Hydraulic hose with fittings (set of 2)\u003c\/p\u003e\u003cp\u003eUniversal hydraulic cylinder\u003c\/p\u003e\u003cp\u003eInstallation Package (includes woodruff key and shaft nut)\u003c\/p\u003e\u003cp\u003eBezel\u003c\/p\u003e\u003cp\u003eHydra-Stik lever\u003c\/p\u003e\u003cp\u003eHydra-Glide Hydraulic Fluid (1 liter)\u003c\/p\u003e\u003cp\u003eClick to Download EZY-Glide Hydra-Stik 2500 Hydraulic Stick Steering System Installation Instructions\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the EZY-Glide Hydra-Stik 2500 Hydraulic Stick Steering System used for? The EZY-Glide Hydra-Stik 2500 Hydraulic Stick Steering System provides stick steering with hydraulic operation. It is designed to deliver smoother steering with no feedback and requires only 2.8 turns from lock to lock, allowing 1.4 turns from the center position to reach a right or left turn.\u003c\/li\u003e\n\u003cli\u003eWhat horsepower engines is the EZY-Glide Hydra-Stik 2500 designed for? The Hydra-Stik 2500 is recommended for use with outboard engines up to 90 HP and jet drives up to 110 HP. Verify your engine or jet drive horsepower before installation to ensure it falls within the stated application range.\u003c\/li\u003e\n\u003cli\u003eCan the EZY-Glide Hydra-Stik 2500 be installed on either side of a boat? Yes. The Hydra-Stik 2500 can be installed on either the port or starboard side of the vessel. Console mounting is also an option, providing flexibility for different steering layouts.\u003c\/li\u003e\n\u003cli\u003eWhat is included with the EZY-Glide Hydra-Stik 2500 steering system? The kit includes a hydraulic helm pump, a 20' hydraulic hose with fittings as a set of two, a universal hydraulic cylinder, bezel, Hydra-Stik lever, installation package, installation manual, and 1 liter of Hydra-Glide Hydraulic Fluid. The installation package includes a woodruff key and shaft nut.\u003c\/li\u003e\n\u003cli\u003eHow many turns does the EZY-Glide Hydra-Stik 2500 require from lock to lock? The Hydra-Stik 2500 requires 2.8 turns from lock to lock. This means the operator turns the lever 1.4 turns from the center position to move to either a right or left turn.\u003c\/li\u003e\n\u003cli\u003eWhat type of steering operation does the EZY-Glide Hydra-Stik 2500 provide? The Hydra-Stik 2500 combines the convenience of stick steering with hydraulic steering operation. Compared with the mechanical steering stick design described for the system, the hydraulic version provides smoother steering with no feedback while retaining the benefits of stick steering.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ezy-Glide","offers":[{"title":"Default Title","offer_id":50581651226882,"sku":"EZG-HS-2500","price":1509.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/HS-2500__09565.1739462872.webp?v=1791077961"},{"product_id":"ezy-glide-ezy-stik-replacement-cable","title":"Ezy-Glide EZY-Stik Replacement Cable","description":"\u003cp\u003eEZY-Glide EZY-Stik Replacement Cable\u003c\/p\u003e\u003cp\u003eWhen it's time to replace the cable on your EZY-Glide EZY-Stik mechanical steering system, getting the right fit matters. These replacement cables work specifically with EZY-Stik II 840 and EZY-Stik III 870 systems. To determine the correct length, measure from your helm's center to the engine's center, add 8 inches, then round up to the nearest half foot. These cables are kept in stock for same-day shipping, getting you back on the water quickly. Note that these cables are designed exclusively for EZY-Glide EZY-Stik systems and aren't compatible with other steering brands.\u003c\/p\u003e\u003cp\u003eHow to Measure a Replacement Cable Length from EZY-Glide:\u003c\/p\u003e\u003cp\u003eMeasure from the center of the helm position to the center of the engine.\u003c\/p\u003e\u003cp\u003eAdd 8\" to this measurement.\u003c\/p\u003e\u003cp\u003eRound up your system length measurement to the nearest 1\/2 foot. (For example, a 12'2\" measurement would order a 12-1\/2' cable)\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat steering systems is this cable compatible with? This cable is for the EZY-Glide EZY-Stik II Model 840 and EZY-Stik III Model 870 mechanical steering systems. It will not work with any other steering brand or model. If you have a different stick steering system or a standard rotary\/rack helm, this is not the correct cable. Check the model designation on your helm before ordering.\u003c\/li\u003e\n\u003cli\u003eHow do I measure for the correct cable length? EZY-Glide uses a different measurement method than most other steering cable brands. Measure from the center of your helm position to the center of the engine, add 8 inches to that measurement, then round up to the nearest half foot. For example, a measurement of 12 feet 2 inches becomes a 12.5-foot cable order. Cables are available in half-foot increments from 7 to 15 feet.\u003c\/li\u003e\n\u003cli\u003eWhy does this cable use a different measurement method than standard steering cables? The EZY-Stik is a stick-steering system mounted forward of the operator rather than at a conventional wheel helm, so the cable routing geometry differs from a typical rotary or rack-and-pinion setup. The 8-inch add-on accounts for the connection geometry specific to the EZY-Stik design. Using a standard steering cable measurement method on this system will result in an incorrectly sized cable.\u003c\/li\u003e\n\u003cli\u003eWhat engine sizes are the EZY-Stik systems this cable fits rated for? The EZY-Stik II Model 840 and EZY-Stik III Model 870 are for outboard engines up to 70 HP and jet drives up to 90 HP. If your engine exceeds these ratings, the EZY-Stik mechanical system, and by extension this replacement cable, is not appropriate for your application.\u003c\/li\u003e\n\u003cli\u003eCan I use a SeaStar, Teleflex, or other brand cable as a substitute? No. This cable is engineered for EZY-Glide EZY-Stik systems and uses proprietary end connections that are not interchangeable with SeaStar, Dometic, Quicksilver, or other standard marine cable types. Using a non-EZY-Glide cable on an EZY-Stik helm will result in improper fitment and potentially unsafe steering.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ezy-Glide","offers":[{"title":"7'","offer_id":50581651489026,"sku":"EZG-RC-0700","price":286.49,"currency_code":"USD","in_stock":true},{"title":"8'","offer_id":50581651521794,"sku":"EZG-RC-0800","price":286.49,"currency_code":"USD","in_stock":true},{"title":"9'","offer_id":50581651554562,"sku":"EZG-RC-0900","price":286.49,"currency_code":"USD","in_stock":true},{"title":"10'","offer_id":50581651587330,"sku":"EZG-RC-1000","price":286.49,"currency_code":"USD","in_stock":true},{"title":"10.5'","offer_id":50581651620098,"sku":"EZG-RC-1050","price":286.49,"currency_code":"USD","in_stock":true},{"title":"11'","offer_id":50581651652866,"sku":"EZG-RC-1100","price":286.49,"currency_code":"USD","in_stock":true},{"title":"11.5'","offer_id":50581651685634,"sku":"EZG-RC-1150","price":286.49,"currency_code":"USD","in_stock":true},{"title":"12'","offer_id":50581651718402,"sku":"EZG-RC-1200","price":286.49,"currency_code":"USD","in_stock":true},{"title":"12.5'","offer_id":50581651751170,"sku":"EZG-RC-1250","price":286.49,"currency_code":"USD","in_stock":true},{"title":"13'","offer_id":50581651783938,"sku":"EZG-RC-1300","price":286.49,"currency_code":"USD","in_stock":true},{"title":"13.5'","offer_id":50581651816706,"sku":"EZG-RC-1350","price":286.49,"currency_code":"USD","in_stock":true},{"title":"14'","offer_id":50581651849474,"sku":"EZG-RC-1400","price":286.49,"currency_code":"USD","in_stock":true},{"title":"14.5'","offer_id":50581651882242,"sku":"EZG-RC-1450","price":286.49,"currency_code":"USD","in_stock":true},{"title":"15'","offer_id":50581651915010,"sku":"EZG-RC-1500","price":286.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/EZY-Replacement-Cable__93048.1724346200.jpg?v=1791077963"}],"url":"https:\/\/allmarineworld.com\/collections\/ezy-glide.oembed","provider":"All Marine World","version":"1.0","type":"link"}