{"title":"Davis Instruments","description":"\u003cp\u003eDavis Instruments products currently published by All Marine World.\u003c\/p\u003e","products":[{"product_id":"davis-happy-troller-folding-trolling-plate","title":"Davis Instruments Happy Troller Folding Trolling Plate","description":"\u003cp\u003eDavis Happy Troller Folding Trolling Plate\u003c\/p\u003e\u003cp\u003eThe Davis Happy Troller Trolling Plate is a significant advancement in the sport of troll fishing. It mounts on the anti-cavitation plate to allow fine control of trolling speed. The Happy Troller features a three-position design that allows for added flexibility and control. At cruising speed, the Happy Troller can be locked in an \"up\" position, providing enhanced stability and a smoother ride in rough water. In the \"down\" position, the Happy Troller slows even big motors down to a slow, fish-tantalizing speed. This trolling plate is made of the highest quality stainless steel and marine aluminum, making it a great option to use year-round in both salt and fresh water. Easy to install, the Happy Troller comes with full instructions and all hardware needed for installation. The Davis Happy Troller is available in two sizes, fitting all I\/O and outboard motors.\u003c\/p\u003e\u003cp\u003eSmall Troller fits outboard motors from 20 to 50 HP\u003c\/p\u003e\u003cp\u003eLarge Troller fits inboard\/outboards, and outboards over 50 HP\u003c\/p\u003e\u003cp\u003eFor outboards under 20 HP, check out the Davis Lil' Fella Trolling Plate\u003c\/p\u003e\u003cp\u003eKey Features:\u003c\/p\u003e\u003cp\u003eMaintains stability in bow-light boats\u003c\/p\u003e\u003cp\u003eSmooths out ride in rough water\u003c\/p\u003e\u003cp\u003eReduces porpoising and cavitation\u003c\/p\u003e\u003cp\u003eMade of only highest quality stainless steel and marine aluminum\u003c\/p\u003e\u003cp\u003eCear anodized aluminum finish\u003c\/p\u003e\u003cp\u003eInstalls in 15 minutes\u003c\/p\u003e\u003cp\u003eStainless steel mounting hardware and installation \u0026amp; operating instructions provided with each unit\u003c\/p\u003e\u003cp\u003eThe Davis Happy Troller Folding Trolling Plate has three positions:\u003c\/p\u003e\u003cp\u003eReduces troll speed in “down” position\u003c\/p\u003e\u003cp\u003eActs as a stabilizer in “up” position\u003c\/p\u003e\u003cp\u003eMiddle position for added flexibility\u003c\/p\u003e\u003cp\u003eClick to Download Happy Troller Installation Instructions.\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Davis Happy Troller Folding Trolling Plate used for? The Davis Happy Troller Folding Trolling Plate mounts on a boat motor's anti-cavitation plate to provide control over trolling speed. Its three-position design allows the plate to reduce trolling speed in the down position, act as a stabilizer in the up position, or provide an intermediate setting.\u003c\/li\u003e\n\u003cli\u003eWhat motor sizes does the Davis Happy Troller Trolling Plate fit? The Davis Happy Troller is available in two sizes. The Small Troller fits outboard motors from 20 to 50 HP, while the Large Troller fits inboard\/outboards and outboard motors over 50 HP. For outboards under 20 HP, the product description recommends the Davis Lil' Fella Trolling Plate.\u003c\/li\u003e\n\u003cli\u003eWhat are the three positions of the Davis Happy Troller Folding Trolling Plate? The Davis Happy Troller has three positions. The down position reduces trolling speed, the up position acts as a stabilizer and can be locked for cruising, and the middle position provides additional flexibility and control.\u003c\/li\u003e\n\u003cli\u003eHow does the Davis Happy Troller help improve boat handling? The Davis Happy Troller can help maintain stability in bow-light boats, smooth the ride in rough water, and reduce porpoising and cavitation. When cruising, the plate can be locked in the up position for added stability and a smoother ride in rough water.\u003c\/li\u003e\n\u003cli\u003eWhat is the Davis Happy Troller Folding Trolling Plate made from? The Davis Happy Troller is made from stainless steel and marine aluminum and features a clear anodized aluminum finish. Stainless steel mounting hardware is included with each unit.\u003c\/li\u003e\n\u003cli\u003eWhat is included with the Davis Happy Troller Trolling Plate? The Davis Happy Troller includes stainless steel mounting hardware along with installation and operating instructions. The product description states that it is designed for easy installation and can be installed in approximately 15 minutes.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davis Instruments","offers":[{"title":"460","offer_id":50581605155074,"sku":"DAV-0460","price":266.49,"currency_code":"USD","in_stock":true},{"title":"461","offer_id":50581605187842,"sku":"DAV-461","price":239.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/410799_source_1504276835.jpg?v=1791077571"},{"product_id":"davis-air-dryr-marine-dehumidifier","title":"Davis Instruments Air-Dryr Marine Dehumidifier","description":"\u003cp\u003eDavis Air-Dryr Marine Dehumidifier\u003c\/p\u003e\u003cp\u003eThe Davis Air-Dryr Marine Dehumidifier uses natural convection to silently control moisture in your boat's cabin, bilge, or engine compartment. Available in two models handling 500 or 1000 cubic feet, these units run continuously on 110-volt power with minimal electricity draw. The beige polycarbonate housing features a stable, low-profile design that won't tip over and stays cool to the touch during operation. With no switches, fans, or thermostats, the Air-Dryr heats damp air above the dew point to prevent mold growth and moisture damage. Simply plug it in for maintenance-free, 24-hour protection. UL listed with spark-free operation and backed by a one-year manufacturer's warranty.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eStrong and durable, beige polycarbonate housing\u003c\/p\u003e\u003cp\u003eSlim and stable design will not tip over easily\u003c\/p\u003e\u003cp\u003eSmall in design, will fit into confined spaces with ease\u003c\/p\u003e\u003cp\u003eHandles high air volume for fast drying\u003c\/p\u003e\u003cp\u003eDesigned to run 24 hours a day\u003c\/p\u003e\u003cp\u003eSafe to the touch\u003c\/p\u003e\u003cp\u003eLow operating cost\u003c\/p\u003e\u003cp\u003eLow maintenance\u003c\/p\u003e\u003cp\u003eNo switch, fan, or thermostat; uses natural convection to circulate the air\u003c\/p\u003e\u003cp\u003eSilent operation\u003c\/p\u003e\u003cp\u003eNo components to cause sparking\u003c\/p\u003e\u003cp\u003eUL listed\u003c\/p\u003e\u003cp\u003eOne-year manufacturer's warranty.\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003e#1458\u003c\/p\u003e\u003cp\u003eHandles up to 1000 cubic feet\u003c\/p\u003e\u003cp\u003eDraws 1.1 Amps, 130 Watts\u003c\/p\u003e\u003cp\u003e13.5\" Diameter\u003c\/p\u003e\u003cp\u003e4.25\" Height\u003c\/p\u003e\u003cp\u003e#1459\u003c\/p\u003e\u003cp\u003eHandles up to 500 cubic feet\u003c\/p\u003e\u003cp\u003eDraws 0.6 Amps, 70 Watts\u003c\/p\u003e\u003cp\u003eDimensions: 14\" x 5\" x 4.5\"\u003c\/p\u003e\u003cp\u003eHow to Use the Davis Air-Dryr Marine Dehumidifier\u003c\/p\u003e\u003cp\u003eTo achieve optimal efficiency, always operate the Air-Dryr Marine Dehumidifier in the normal upright position.\u003c\/p\u003e\u003cp\u003ePlace Air-Dryr on the floor in the area to be served.\u003c\/p\u003e\u003cp\u003ePlug the power cord into any standard 110-volt grounded outlet.\u003c\/p\u003e\u003cp\u003eWhen a unit is placed on a high pile carpet, airflow through the bottom intake holes may be restricted.\u003c\/p\u003e\u003cp\u003eNote: for this reason, steps should be taken to maintain a clear air space beneath the unit.\u003c\/p\u003e\u003cp\u003eAfter you plug in the unit, allow 15 to 20 minutes for it to heat to the proper operating temperature.\u003c\/p\u003e\u003cp\u003eExterior surfaces may be cleaned with a mild detergent and water solution on a moist cloth when not plugged in and have been allowed to cool.\u003c\/p\u003e\u003cp\u003eClick to Download Davis Air-Dryr Instruction Sheet\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Davis Air-Dryr Marine Dehumidifier used for? The Davis Air-Dryr Marine Dehumidifier is designed to control moisture in enclosed boat areas such as cabins, bilges, and engine compartments. It uses natural convection to circulate air and heats damp air above the dew point to help prevent mold growth and moisture damage.\u003c\/li\u003e\n\u003cli\u003eHow does the Davis Air-Dryr Marine Dehumidifier work? The Air-Dryr uses natural convection rather than a fan to circulate air. It heats damp air above the dew point, helping control moisture without switches, fans, or thermostats. The unit operates silently and is designed for continuous 24-hour operation.\u003c\/li\u003e\n\u003cli\u003eWhich Davis Air-Dryr Marine Dehumidifier model should I choose? Model #1458 handles areas up to 1,000 cubic feet and draws 1.1 amps at 130 watts. Model #1459 handles areas up to 500 cubic feet and draws 0.6 amps at 70 watts. Select the model based on the size of the area being served.\u003c\/li\u003e\n\u003cli\u003eHow do you use the Davis Air-Dryr Marine Dehumidifier? Place the Air-Dryr upright on the floor in the area to be served and plug it into a standard 110-volt grounded outlet. Maintain clear air space beneath the unit, especially when placing it on high-pile carpet. Allow 15 to 20 minutes after plugging it in for the unit to reach its operating temperature.\u003c\/li\u003e\n\u003cli\u003eDoes the Davis Air-Dryr Marine Dehumidifier operate continuously? Yes. The Air-Dryr is designed to run 24 hours a day for continuous moisture control. It has silent operation, low operating cost, and low maintenance requirements, and it does not use a switch, fan, or thermostat.\u003c\/li\u003e\n\u003cli\u003eWhat are the electrical requirements for the Davis Air-Dryr Marine Dehumidifier? The Davis Air-Dryr Marine Dehumidifier operates on 110-volt power and should be connected to a standard …\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davis Instruments","offers":[{"title":"500 Cubic Feet","offer_id":50581605220610,"sku":"DAV-1459","price":77.99,"currency_code":"USD","in_stock":true},{"title":"1000 Cubic Feet","offer_id":50581605253378,"sku":"DAV-1458","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/385428_source_1550263035.jpg?v=1791077573"},{"product_id":"davis-deluxe-rigging-knife","title":"Davis Instruments Rigging Knife Deluxe","description":"\u003cp\u003eDavis Deluxe Rigging Knife\u003c\/p\u003e\u003cp\u003eMade entirely of top quality stainless steel with dura-edged blades. Telo Rigging knives are tools that yachtsmen will be proud to own, yet are affordable. Deluxe Rigging Knife comes with a marlin spike, shackle key, and screwdriver.\u003c\/p\u003e","brand":"Davis Instruments","offers":[{"title":"Default Title","offer_id":50581605318914,"sku":"DAV-1551","price":33.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/1__49578.1763741609.webp?v=1791077573"},{"product_id":"davis-illuminated-hand-bearing-compass","title":"Davis Instruments Hand Bearing Compass W\/Led","description":"\u003cp\u003eDavis Illuminated Hand Bearing Compass\u003c\/p\u003e\u003cp\u003eUsing a Davis Instruments precision marine hand bearing compass, you can easily obtain quick magnetic bearings on shore or floating objects. Obtain a bearing simply by aligning front and rear sights on an object and reading off bearing. This compass is excellent for yachtsmen, racers, and fishermen. Uses include quick bearing or position set, determination of angular gain or loss on the competition while racing, checking distance offshore, establishing lee-bow set while cruising or racing in currents, drift vectoring, and plotting a line of position.\u003c\/p\u003e\u003cp\u003eFeatures a liquid-damped compass card graduated in 5 degree segments and a large, contoured handle. This illuminated model has a solid-state LED illumination system which floods the compass capsule and sight vane with soft light. The LED will last for the lifetime of the compass. Lanyard and instructions included.\u003c\/p\u003e\u003cp\u003eHow to Use Your Davis Illuminated Hand Bearing Compass\u003c\/p\u003e\u003cp\u003eSighting objects\u003c\/p\u003e\u003cp\u003eHold the compass in a relaxed position at arms length, with the yellow cursor line facing you. With the compass slightly tipped so both pointers are visible, rotate your arm and upper body until both pointers are in-line with the object being sighted. Read the magnetic bearing as it appears at the yellow cursor line.\u003c\/p\u003e\u003cp\u003eNavigating Using your Sightings\u003c\/p\u003e\u003cp\u003eA line of position is easy to obtain. Find an object that is easy to identify on a chart and take a sighting to determine its magnetic bearing.\u003c\/p\u003e\u003cp\u003eDraw a line from the object using its magnetic bearing and you know that you are somewhere along that line of position. Take a sighting of another object and plot its line of position. Your position is where the two lines cross.\u003c\/p\u003e\u003cp\u003ePlotting Distance Offshore\u003c\/p\u003e\u003cp\u003eThis is easiest and most accurate when your compass course is roughly parallel to the shoreline. You must also know your speed over ground.\u003c\/p\u003e\u003cp\u003eNote the exact time that you are abeam of (perpendicular to) or 45 degrees of a prominent object on shore like a lighthouse, smoke stack or radio tower.\u003c\/p\u003e\u003cp\u003eTake the exact time again when you are perpendicular to or 45 degrees off the object. Plot these sightings on the chart and, with your distance run as one leg, you have a right triangle.\u003c\/p\u003e\u003cp\u003eYour speed multiplied by the time equals both your distance offshore and the distance run.\u003c\/p\u003e\u003cp\u003ePredicting Collision Course\u003c\/p\u003e\u003cp\u003eTake a sighting on any moving or stationary object that you suspect might be on a collision course and note its bearing. If repeated sightings yield the same bearing, you are on a collision course. Note that a collision course with a stationary object means that you are being \"set\" by drift or tide and you must alter course to avoid a collision.\u003c\/p\u003e\u003cp\u003eChecking Drift While at Anchor\u003c\/p\u003e\u003cp\u003eTake sightings on any two or more objects on the shore and write them down. Radical changes in their magnetic bearings could indicate that your anchor is dragging.\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Davis Illuminated Hand Bearing Compass used for? The Davis Illuminated Hand Bearing Compass is designed to obtain quick magnetic bearings on shore or floating objects. It can be used for navigation, plotting lines of position, checking distance offshore, evaluating drift, and taking bearings while cruising, racing, fishing, or sailing.\u003c\/li\u003e\n\u003cli\u003eHow do you take a bearing with the Davis Illuminated Hand Bearing Compass? Hold the compass at arm's length with the yellow cursor line facing you. Align the front and rear pointers with the object being sighted by rotating your arm and upper body. Once the pointers are in line with the object, read the magnetic bearing at the yellow cursor line.\u003c\/li\u003e\n\u003cli\u003eWhat features does the Davis Illuminated Hand Bearing Compass have? The compass features a liquid-damped compass card graduated in 5-degree segments, a large contoured handle, and a solid-state LED illumination system. The LED floods the compass capsule and sight vane with soft light and is designed to last for the lifetime of the compass. Can …\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davis Instruments","offers":[{"title":"Default Title","offer_id":50581605351682,"sku":"DAV-215","price":66.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/DAV-215__16382.1722501113_0be15bd8-a2e1-44ee-b9cf-9fea3c6918e4.webp?v=1791077574"},{"product_id":"davis-tiller-tamer","title":"Davis Instruments TILLER-TAMER","description":"\u003cp\u003eDavis Tiller Tamer\u003c\/p\u003e\u003cp\u003eThe Davis Tiller Tamer maintains cruising course with no hands, in any weather or wind condition. The Tiller-Tamer gives improved control and feel to the tiller handle, and the tension is smoothly adjustable from fully locked to fully free.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eMaintains cruising course with no hands\u003c\/p\u003e\u003cp\u003eDoes not interfere with automatic steering systems\u003c\/p\u003e\u003cp\u003eNo loss of cockpit space\u003c\/p\u003e\u003cp\u003eNo need to lash the tiller when boat is moored or trailered\u003c\/p\u003e\u003cp\u003eMay be mounted on top or bottom of tiller\u003c\/p\u003e\u003cp\u003eClick to Download Davis Tiller Tamer Installation Instructions\u003c\/p\u003e","brand":"Davis Instruments","offers":[{"title":"Default Title","offer_id":50581605384450,"sku":"DAV-2205","price":66.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/DAV-2205__77434.1739462802_25aa507c-1ef0-4f2b-a8b1-c85438f8fd49.jpg?v=1791077576"},{"product_id":"davis-round-sail-track-stop","title":"Davis Instruments Round Sail Track Stop","description":"\u003cp\u003eDavis Round Sail Track Stop\u003c\/p\u003e\u003cp\u003eThese Davis Round Sail Track Stops hold your sail and its slides in place on the mast and boom. The large knurled wheels are released with ease.\u003c\/p\u003e\u003cp\u003eMade of heavy-duty, black anodized aluminum and marine-grade nickel plated brass\u003c\/p\u003e\u003cp\u003eDimensions: .50\" dia x .875\"\u003c\/p\u003e\u003cp\u003eClick to Download Davis Round Sail Track Stop Instructions\u003c\/p\u003e","brand":"Davis Instruments","offers":[{"title":"Default Title","offer_id":50581605515522,"sku":"DAV-2350","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/Sail_Track_Stops__31436.1722484001_2096420c-c82a-4411-9909-bf84f131081a.jpg?v=1791077577"},{"product_id":"davis-shockles-linesnubber","title":"Davis Instruments Shockles LineSnubber","description":"\u003cp\u003eDavis Shockles LineSnubber\u003c\/p\u003e\u003cp\u003eThe Davis Shockles LineSnubber is used as shock absorbers on dock lines and anchor lines to reduce loads, minimize chafe, and increase safety. Tensions and loads on a dock or mooring change as tidal surges, wakes, winds, and currents change; shockles absorb shock loads on mooring lines, making the lines last longer. With Davis Shockles, you can put an end to jarring and snapping at the end of the line, making time aboard more comfortable. Shockles also safely absorb sudden shock loads such as those at the end of a tow line or created by a dinghy tied on deck. These Shockles make life at the dock or at a mooring safer and more comfortable.\u003c\/p\u003e\u003cp\u003eShockles are strong, but they need to be rigged in-line so they never bear the full load alone. Six to twelve inches of slack is recommended; increase line slack to a maximum of 12\" as loads increase. The patented internal line limiter is made of 2500 lb. test nylon webbing. LineSnubber's outer sheath is 3500 lb. test tubular nylon webbing that is UV resistant to protect internal parts.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eSold individually - available in blue or black\u003c\/p\u003e\u003cp\u003eMinimizes stress on all lines\u003c\/p\u003e\u003cp\u003e20\" length when relaxed\u003c\/p\u003e\u003cp\u003eCan stretch to a maximum length of 36\"\u003c\/p\u003e\u003cp\u003eIncludes two 316 Stainless Steel clips\u003c\/p\u003e","brand":"Davis Instruments","offers":[{"title":"2400","offer_id":50581605581058,"sku":"DAV-2400","price":119.99,"currency_code":"USD","in_stock":true},{"title":"2410","offer_id":50581605613826,"sku":"DAV-2410","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/Untitled-1__67636.1763741607.webp?v=1791077577"},{"product_id":"davis-dockshockle-12","title":"Davis Instruments Dock Shockle","description":"\u003cp\u003eDavis DockShockle 12\"\u003c\/p\u003e\u003cp\u003eThe Davis Instruments DockShockle is a simple and safe solution for reducing dangerous shock loads and minimizing stress on lines. Additionally, the DockShockle reduces chafe, resulting in longer lasting lines. You can use the DockShockle with all types of dock lines up to 3\/4\" in diameter. For braided or twisted lines, a pair of Mini-Line Grabbers are included for easy attachment. The Davis DockShockle is designed specifically for dock lines for smaller, lighter boats (up to 40 ft in length), but can also be used on towing lines to minimize shock and tie down lines to securely hold items in place.\u003c\/p\u003e\u003cp\u003eDavis' DockShockle is made of 2500 lbs. test nylon webbing with an outer sheath of 3500 lbs. nylon webbing that's UV resistant to protect all internal parts. The DockShockle stretches to about 5\" under 50lbs. of force. The maximum stretch is 7.5\" until the Load Limiter engages. The patented Internal Stretch Limiter increase the return force in relation to the amount of stretch. You can easily adjust the amount of stretch by setting the desired amount of slack. Ideal working slack in line is 3 to 6 inches.\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003e12\" Long webbing\u003c\/p\u003e\u003cp\u003eIdeal working slack is 3\" - 6\".\u003c\/p\u003e\u003cp\u003eIncluded:\u003c\/p\u003e\u003cp\u003e(1) 12\" DockShockle\u003c\/p\u003e\u003cp\u003e(2) 316 Stainless steel carabiners\u003c\/p\u003e\u003cp\u003e(1) Pair of 7\" Mini-Line Grabbers\u003c\/p\u003e\u003cp\u003eUse the included Mini-Line Grabbers with the DockShockle to attach double-braided or twisted lines. Mini-Line Grabbers use a constrictor knot called a Prusik Hitch. They will not damage braided or twisted line.\u003c\/p\u003e","brand":"Davis Instruments","offers":[{"title":"Default Title","offer_id":50581605679362,"sku":"DAV-2415","price":86.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/2415__13726.1558182494.1280.1280__07187.1722516615.jpg?v=1791077579"},{"product_id":"davis-anchor-snubber-20-black","title":"Davis Instruments Anchor Snubber","description":"\u003cp\u003eDavis Anchor Snubber\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003e20\" Long\u003c\/p\u003e\u003cp\u003eEases the tension on the anchor chain, rode or snubber line\u003c\/p\u003e\u003cp\u003eEliminates chain noise and shock loads to chain, anchor roller, windlass, cleats.\u003c\/p\u003e","brand":"Davis Instruments","offers":[{"title":"Default Title","offer_id":50581605744898,"sku":"DAV-2420","price":99.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/1__06758.1755267581.webp?v=1791077580"},{"product_id":"davis-minishockle-black-bungee-cord","title":"Davis Instruments MINI SHOCKLE 24\" BLACK","description":"\u003cp\u003eDavis MiniShockle Black Bungee Cord\u003c\/p\u003e\u003cp\u003eThe Davis MiniShockle is a bungee cord on steroids! Take a MiniShockle with you when boating, camping, biking and more. Make sure that your load is held in place solidly, securely, and safely with the MiniShockle. UV-resistant nylon webbing is sewn over marine grade elastomer.\u003c\/p\u003e\u003cp\u003e316 stainless steel wire gate snaps will hold up to 300 lbs. (136 kg.)\u003c\/p\u003e\u003cp\u003eIncludes:\u003c\/p\u003e\u003cp\u003eBlack MiniShockle\u003c\/p\u003e\u003cp\u003e316 stainless steel wire gate snaps\u003c\/p\u003e\u003cp\u003eLengths Available:\u003c\/p\u003e\u003cp\u003e12\"\u003c\/p\u003e\u003cp\u003e18\"\u003c\/p\u003e\u003cp\u003e24\"\u003c\/p\u003e","brand":"Davis Instruments","offers":[{"title":"Default Title","offer_id":50581605810434,"sku":"DAV-2445","price":53.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/2430.1__14440.1558182388.webp?v=1791077581"},{"product_id":"davis-fender-friend-twin-eye","title":"Davis Instruments Fender Friend-Twin Eye","description":"\u003cp\u003eDavis Fender Friend - Twin-Eye\u003c\/p\u003e\u003cp\u003e**FENDER NOT INCLUDED**\u003c\/p\u003e\u003cp\u003eFenderFriend is a fender whip, hanger and adjuster all in one.\u003c\/p\u003e\u003cp\u003eFenderFriend features Shockles® built-in shock absorber to receive the impact generated by fenders rubbing against the hull or dock.\u003c\/p\u003e\u003cp\u003eAllows anyone to quickly and easily set the fenders\u003c\/p\u003e\u003cp\u003eStretches when fenders get squeezed between the hull and dock or against another boat\u003c\/p\u003e\u003cp\u003eKeeps stanchions, rails and cleats from bending under pull from fenders\u003c\/p\u003e\u003cp\u003eFenderFriend provides a slight amount of stretch, which helps keep fenders in place while docking, or during surges and wakes when the boat is unattended. Tighten or loosen the strap to adjust the fender height.\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eUV resistant strap adjusts from 16 to 72\" (0.4-1.8 m)\u003c\/p\u003e\u003cp\u003eSturdy, marine grade nylon buckle makes attaching fenders a snap\u003c\/p\u003e\u003cp\u003eIncludes:\u003c\/p\u003e\u003cp\u003eTwin-Eye FenderFriend with black webbing and buckle. No more torn fender eyes!\u003c\/p\u003e","brand":"Davis Instruments","offers":[{"title":"Default Title","offer_id":50581605875970,"sku":"DAV-2450","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/2__48517.1763741609.jpg?v=1791077582"},{"product_id":"davis-fender-friend-center-tube","title":"Davis Instruments Fender Friend-Cntr Tube","description":"\u003cp\u003eDavis Fender Friend - Center Tube\u003c\/p\u003e\u003cp\u003eA reliable way to keep your boat fenders in place. Nylon buckle for swift, secure attachment without complicated knots. FenderFriend stretches to avoid shock to your rails, stanchions, life lines or cleats.\u003c\/p\u003e","brand":"Davis Instruments","offers":[{"title":"Default Title","offer_id":50581605941506,"sku":"DAV-2455","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/1__83058.1763741607.webp?v=1791077585"},{"product_id":"davis-windex-10sport-wind-vane","title":"Davis Instruments Windex 10.Sport Wind Vane","description":"\u003cp\u003eDavis Windex 10.Sport Wind Vane\u003c\/p\u003e\u003cp\u003eThe Davis Windex 10.Sport Wind Vine offers exceptional performance at the best value. Features include a sapphire jewel suspension bearing, large fin-low inertia vane, and an easy-to-read, fully adjustable tracking system. Reflector tape on the vane and tracking tabs makes the Windex 10.Sport easy to see day or night. The Windex 10.Sport has a 10\" sturdy vane that offers many years of use. They have been wind tunnel tested to wind speeds of 80 knots.\u003c\/p\u003e\u003cp\u003eIncludes glass reinforced poly-carbonate J-Base for side, top, or front of mast mounting on most dinghies, smaller boats, and sport boats.\u003c\/p\u003e\u003cp\u003eKey Features:\u003c\/p\u003e\u003cp\u003eSapphire jewel suspension bearing\u003c\/p\u003e\u003cp\u003eFully adjustable tracking system\u003c\/p\u003e\u003cp\u003eStands 9.25\" tall and weighs 1.2 ounces\u003c\/p\u003e\u003cp\u003eClick to Download Davis Windex 10.Sport Instructions\u003c\/p\u003e","brand":"Davis Instruments","offers":[{"title":"Default Title","offer_id":50581606007042,"sku":"DAV-3120","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/Windex-10.Sport__00412.1722347459_ca723ca9-9160-4323-a961-0a8119300638.jpg?v=1791077584"},{"product_id":"davis-windex-15-wind-vane","title":"Davis Instruments WINDEX 15 WIND VANE","description":"\u003cp\u003eDavis Windex 15 Wind Vane\u003c\/p\u003e\u003cp\u003eDavis Windex Wind Vanes deliver exceptional performance at the best value. This wind vane features a sapphire jewel suspension bearing, large fin-low inertia vane, and easy-to-read, fully adjustable tacking tab system. Reflector tape on the vane and tacking tabs makes the Windex 15 easy to see day and night. The Windex 15 has a 15\" vane that is sturdy and offers years of use. These vanes have been wind tunnel tested to wind speeds of 80 knots.\u003c\/p\u003e\u003cp\u003eIncludes through-bolt or drill and tap mounting socket; 5\/16\" -18 stainless stud, washers and nut.\u003c\/p\u003e\u003cp\u003eKey Features:\u003c\/p\u003e\u003cp\u003ePerfect choice for all cruising and racing boats 15 feet and bigger\u003c\/p\u003e\u003cp\u003eSapphire jewel suspension bearing\u003c\/p\u003e\u003cp\u003eLarge fin-low inertia vane\u003c\/p\u003e\u003cp\u003eFully adjustable tacking tab system\u003c\/p\u003e\u003cp\u003eBird-proof spike extends another 10\" above the vane to discourage birds from landing\u003c\/p\u003e\u003cp\u003eStands 1.75\" tall and weighs just 3.6 ounces\u003c\/p\u003e\u003cp\u003eClick to Download Davis Windex 15 Assembly Instructions\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Davis Windex 15 Wind Vane designed for? The Davis Windex 15 Wind Vane is designed for cruising and racing boats 15 feet and larger. It features a 15-inch vane with a large fin and low-inertia design for wind direction indication.\u003c\/li\u003e\n\u003cli\u003eWhat features help the Davis Windex 15 Wind Vane respond to wind? The Windex 15 uses a sapphire jewel suspension bearing and a large fin-low inertia vane. These features are designed to provide exceptional performance, while the fully adjustable tacking tab system makes the vane easy to read.\u003c\/li\u003e\n\u003cli\u003eIs the Davis Windex 15 Wind Vane visible at night? Yes. Reflector tape on the vane and tacking tabs helps make the Davis Windex 15 easy to see both day and night. The vane also includes a bird-proof spike that extends another 10 inches above the vane to discourage birds from landing.\u003c\/li\u003e\n\u003cli\u003eWhat wind speeds has the Davis Windex 15 Wind Vane been tested for? The Davis Windex 15 Wind Vane has been wind tunnel tested to wind speeds of 80 knots. The vane is designed for long-term use and features a sturdy 15-inch vane.\u003c\/li\u003e\n\u003cli\u003eWhat mounting hardware is included with the Davis Windex 15? The Davis Windex 15 includes a through-bolt or drill-and-tap mounting socket, along with a 5\/16\"-18 stainless steel stud, washers, and nut.\u003c\/li\u003e\n\u003cli\u003eHow much does the Davis Windex 15 Wind Vane weigh? The Davis Windex 15 Wind Vane weighs 3.6 ounces and stands 1.75 inches tall. Its lightweight construction and 15-inch vane make it suitable for the cruising and racing boat applications specified by Davis.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davis Instruments","offers":[{"title":"Default Title","offer_id":50581606072578,"sku":"DAV-3150","price":77.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/Windex_15__35794.1722506041_f0ce53f5-361b-44ea-9e44-985cd81f1f7b.webp?v=1791077585"},{"product_id":"davis-rudder-position-indicator","title":"Davis Instruments Rudder Position Indicator","description":"\u003cp\u003eAwareness of the rudder angle is an important safety factor. This is especially true while moving in and out of your berth, drawing alongside another boat, picking up a skier, mooring, or any other \"close call\" situation. Davis' Rudder Position Indicator gives instant visual reference of rudder angle. The pointer swings a full thirty degrees with each revolution of the wheel. Mounts directly to your hub (approximately 2\" (5 cm) in diameter) with a self-adhesive pad . Rugged, hermetically sealed, weatherproof, and sunproof housing ensures long life. No cables, adjustments, or electricity required; gravity power makes it simple and service-free. Suitable for boats with mechanical and single station hydraulic steering systems.\u003c\/p\u003e","brand":"Davis Instruments","offers":[{"title":"Default Title","offer_id":50581606138114,"sku":"DAV-385","price":38.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/DAV-385__82595.1722518402.jpg?v=1791077587"},{"product_id":"davis-boat-fender-tender-ii-fender-hanger-2-pack","title":"Davis Instruments Fendertender Ii","description":"\u003cp\u003eDavis Boat Fender Tender II Fender Hanger\u003c\/p\u003e\u003cp\u003ePack of 2\u003c\/p\u003e\u003cp\u003eUse this Davis accessory to clip your fenders to rails, lifelines, side wing windows or cleats. Fender Tender II simplifies the handling and relocation of boat fenders. The \"Railing Lock\" firmly grasps rails from 7\/8\" to 1\" (22 to 25 mm) diameter. New \"Lifeline Lock\" provides added safety. Use 1\/4\" to 3\/8\" (6 mm to 9 mm) diameter nylon line. Made of tough, sun-resistant plastic.\u003c\/p\u003e","brand":"Davis Instruments","offers":[{"title":"Default Title","offer_id":50581606203650,"sku":"DAV-393","price":14.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/1__67476.1763741609.jpg?v=1791077588"},{"product_id":"davis-secure-chafe-guard","title":"Davis Instruments Secure Chafe Guard","description":"\u003cp\u003eDavis Secure Removable Chafe Guard Pair\u003c\/p\u003e\u003cp\u003eChafe protection is critical at the dock, at anchor, or on a mooring. The Chafe Guard is a good solution to prevent chafing over a cleat, cap rail, where two lines cross or at the anchor roller. Dock lines can be expensive; extending their life with good chafe protection is not. Removable Chafe Guards fit 3\/8\" to 7\/8\" line (10 mm to 23 mm). Great for anchor lines or mooring pennants, where chafing through a line could cost you the boat. Velcro brand hook fasteners on the inside of the guard grip the line securely; no need for additional strings or ties. Easily reposition when dock lines stretch and chafe protection needs to moved.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eSold by the pair\u003c\/p\u003e\u003cp\u003eAvailable in white or black\u003c\/p\u003e\u003cp\u003eFits braided or twisted line from 3\/8 to 1\"\u003c\/p\u003e\u003cp\u003eOutside cover is tough, UV-stabilized nylon webbing\u003c\/p\u003e\u003cp\u003eInside is 100% Velcro hook fasteners\u003c\/p\u003e\u003cp\u003eEach Chafe Guard is 16\" Long\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat are Davis Secure Removable Chafe Guard Pair used for? Davis Secure Removable Chafe Guards provide protection for dock and anchor lines where they may rub against cleats, cap rails, anchor rollers, or other lines. They can also be used with mooring pennants to help protect lines from chafing.\u003c\/li\u003e\n\u003cli\u003eWhat size lines do Davis Secure Removable Chafe Guards fit? Davis Secure Removable Chafe Guards are designed to fit braided or twisted lines from 3\/8 inch to 1 inch in diameter. The product description also lists a 3\/8-inch to 7\/8-inch range, so verify the applicable line size before use.\u003c\/li\u003e\n\u003cli\u003eHow do Davis Secure Removable Chafe Guards stay attached to the line? Davis Secure Removable Chafe Guards use Velcro brand hook fasteners on the inside to grip the line securely. This design eliminates the need for additional strings or ties and allows the guards to be repositioned as dock lines stretch.\u003c\/li\u003e\n\u003cli\u003eWhat are Davis Secure Removable Chafe Guards made from? The outside cover of Davis Secure Removable Chafe Guards is made from tough, UV-stabilized nylon webbing. The inside uses 100% Velcro hook fasteners to grip the line.\u003c\/li\u003e\n\u003cli\u003eHow long are Davis Secure Removable Chafe Guards? Each Davis Secure Removable Chafe Guard is 16 inches long. The guards are removable and can be repositioned when dock lines stretch and the location requiring chafe protection changes.\u003c\/li\u003e\n\u003cli\u003eWhat is included with Davis Secure Removable Chafe Guards? Davis Secure Removable Chafe Guards are sold as a pair. They are available in white or black and are designed to provide removable chafe protection for braided or twisted marine lines.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davis Instruments","offers":[{"title":"395","offer_id":50581606269186,"sku":"DAV-395","price":36.99,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":50581606301954,"sku":"DAV-397","price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/b__10159.1755265531_85004cbe-e082-4168-b23c-fa2e6e9efa35.jpg?v=1791077589"},{"product_id":"davis-queaz-away-motion-sickness-wristbands","title":"Davis Instruments Queaz-Away Wristbands","description":"\u003cp\u003eDavis Queaz-Away Travelers' Wristbands\u003c\/p\u003e\u003cp\u003eQueaz-Away is a non-drug aid for people on the go. The unpleasant effects of bumpy flights, choppy seas, winding roads, rocking trains, and spinning Ferris wheels can ruin a trip or outing. Queaz-Away wristbands exert gentle pressure on points on each wrist to minimize or eliminate the miserable effects of travel. Safe and easy to use. With no complicating buckles or adjustments, simply slip this wristband onto wrists, position, and enjoy your travel. The Queaz-Away Wristband can be worn repeatedly or continuously, even while sleeping to prevent the onset of discomfort.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eTough and Long Lasting\u003c\/p\u003e\u003cp\u003eWashable Material\u003c\/p\u003e\u003cp\u003eNon-Drug Aid\u003c\/p\u003e\u003cp\u003eOne Size Fits All\u003c\/p\u003e\u003cp\u003eIncludes Handy Carrying Case\u003c\/p\u003e\u003cp\u003eInstructions:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eWristband must be worn properly to be effective. Position the button as follows:\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eStarting at the first wrist crease (A), use your three middle fingers (B) to measure to a point on the underside of each wrist (C).\u003c\/p\u003e\u003cp\u003ePosition the button downward over this point, between the two central (flexor) tendons (D).\u003c\/p\u003e","brand":"Davis Instruments","offers":[{"title":"Default Title","offer_id":50581606400258,"sku":"DAV-400","price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/Untitled-1__14669.1773937751_b175d0d4-477b-442d-ad74-ba3c8db341d2.webp?v=1791077590"},{"product_id":"davis-doel-fin-boat-stabilizer-fin","title":"Davis Instruments Doel Fin Hydrofoil","description":"\u003cp\u003eDavis Doel-Fin Boat Stabilizer Fin\u003c\/p\u003e\u003cp\u003eDoel-Fin is the original hydrofoil developed by an aeronautical engineer to improve overall performance on all boats with outboard motors or outdrive units. Molded in two pieces of guaranteed unbreakable, high-strength plastic, each foil is designed to flex independently to absorb shock. The positive effects include greater stability, consistent planing at lower RPM, faster out-of-the hole performance, better gas mileage, steadier turns, higher top-end speeds and lower bow rise at all speeds. Doel-Fin is designed for use with small motors, big motors and inflatable dingies. Boats with small motors no longer porpoise with the bow-up when the throttle is applied, and they can achieve planing at lower engine speeds. Big motors benefit from less stern suction, faster planing times, and steadier turns. All of these features add up to increased fuel efficiency.\u003c\/p\u003e\u003cp\u003eFits all motors except Volvo Penta 280 and 290 outdrives.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eImproves overall performance om boats with outboard motors or outdrive units\u003c\/p\u003e\u003cp\u003eConstructed of unbreakable, high-strength plastic\u003c\/p\u003e\u003cp\u003eProduces maximum lift while minimizing drag\u003c\/p\u003e\u003cp\u003eFaster out-of-the-hole for happier water skiers\u003c\/p\u003e\u003cp\u003eSave up to 30% on fuel consumption\u003c\/p\u003e\u003cp\u003eLess bow rise for better visibility and increased safety\u003c\/p\u003e\u003cp\u003eSimple 15 minute installation\u003c\/p\u003e\u003cp\u003eMounting hardware included\u003c\/p\u003e\u003cp\u003eClick to Download Davis Doel-Fin Installation Instructions\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Davis Doel-Fin Boat Stabilizer Fin designed for? The Davis Doel-Fin Boat Stabilizer Fin is designed to improve overall performance on boats with outboard motors or outdrive units. It can provide greater stability, consistent planing at lower RPM, faster out-of-the-hole performance, steadier turns, higher top-end speeds, and lower bow rise.\u003c\/li\u003e\n\u003cli\u003eWhat motors and boats is the Davis Doel-Fin compatible with? The Davis Doel-Fin is designed for use with small and large motors and inflatable dinghies. It fits all motors except Volvo Penta 280 and 290 outdrives, according to the supplied product description.\u003c\/li\u003e\n\u003cli\u003eWhat is the Davis Doel-Fin made from? The Davis Doel-Fin is molded from two pieces of high-strength plastic. Each foil is designed to flex independently to absorb shock while producing lift and minimizing drag.\u003c\/li\u003e\n\u003cli\u003eHow can the Davis Doel-Fin help improve boat performance? The Davis Doel-Fin is designed to provide maximum lift while minimizing drag. Its stated benefits include faster planing, steadier turns, lower bow rise, improved visibility, and increased fuel efficiency.\u003c\/li\u003e\n\u003cli\u003eHow much fuel can the Davis Doel-Fin save? The product description states that the Davis Doel-Fin can save up to 30% on fuel consumption. Actual fuel savings can vary depending on the boat and operating conditions.\u003c\/li\u003e\n\u003cli\u003eWhat is required to install the Davis Doel-Fin? The Davis Doel-Fin is designed for a simple installation that takes approximately 15 minutes. Mounting hardware is included with the stabilizer fin.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davis Instruments","offers":[{"title":"Default Title","offer_id":50581606564098,"sku":"DAV-440","price":53.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/DAV0-440__30135.1722515066_2d4fe921-1f48-443f-8627-1c5c548a6578.webp?v=1791077591"},{"product_id":"davis-whale-tail-xl-stabilizer","title":"Davis Instruments Whale Tail XL Stabilizer","description":"\u003cp\u003eDavis Whale Tail XL Stabilizer\u003c\/p\u003e\u003cp\u003eThe Davis Whale Tail XL is an aluminum stabilizer and ski boat fin. With this stabilizer, you can improve the performance in any I\/O or outboard motor. The Whale Tail XL extends out behind the propeller to utilize prop wash energy which is normally lost. Whale Tail transforms this energy into lift for immediate response when the throttle is applied. The Whale Tail XL also flattens the wake for water skiing, creating positive, skin-free turns. Use the Whale Tail XL year-round in freshwater or saltwater to improve performance of any boat!\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eUnique hydrodynamic design\u003c\/p\u003e\u003cp\u003eStabilizes bow-light boats\u003c\/p\u003e\u003cp\u003ePops skiers up in less time\u003c\/p\u003e\u003cp\u003eWith bow lowered, visibility is improved-and safety\u003c\/p\u003e\u003cp\u003eSmooths out ride in rough water\u003c\/p\u003e\u003cp\u003eReduces porpoising and cavitating\u003c\/p\u003e\u003cp\u003eIncreases top speed and fuel savings in most applications\u003c\/p\u003e\u003cp\u003eMarine-grade aluminum with durable anodized finish\u003c\/p\u003e\u003cp\u003eThe Davis Whale Tail XL installs in 15 minutes and includes stainless steel hardware!\u003c\/p\u003e\u003cp\u003eHow to Install a Davis Whale Tail XL Stabilizer\u003c\/p\u003e\u003cp\u003eThe Whale Tail XL mounts on the anti-cavitation plate of all inboard\/outboards and outboards.\u003c\/p\u003e\u003cp\u003eLocate the anti-cavitation plate (the horizontal plate just above the propeller). Slide the whale Tail onto the flat side of the anti-cavitation plate, preferably its underside.\u003c\/p\u003e\u003cp\u003eNote: Leave no space between the cut out of the Whale Tail and the back of the anti-cavitation plate. On Volvo inboard\/outboards, mount Whale Tail on top.\u003c\/p\u003e\u003cp\u003eClamp the Whale Tail in place. Using a 1\/4\" (6.5 mm) drill bit and the holes in the Whale Tail as a guide, drill four holes through the anti-cavitation plate.\u003c\/p\u003e\u003cp\u003eOn Volvo, drill through the hollow exhaust anti-cavitation plate.\u003c\/p\u003e\u003cp\u003eNote: if the holes in the Whale Tail do not work on your anti-cavitation plate, drill new holes in the Whale Tail for maximum strength.\u003c\/p\u003e\u003cp\u003eInsert a 1\/4\" (6.5mm) bolt in the hole just drilled, the head of the bolt on the Whale Tail side.\u003c\/p\u003e\u003cp\u003eInstall washer and nut and tighten snugly. Do not over-tighten.\u003c\/p\u003e\u003cp\u003eOn Volvo, longer bolts will be required: 1\/4 x 2\" (6.5 mm x 5.4 cm).\u003c\/p\u003e\u003cp\u003eClick to Download Davis Whale Tail XL Installation Instructions\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat does the Davis Whale Tail XL Stabilizer do? The Davis Whale Tail XL Stabilizer uses prop wash energy to create lift when the throttle is applied, helping improve boat performance. It can stabilize bow-light boats, reduce porpoising and cavitating, smooth the ride in rough water, and improve visibility by lowering the bow. It can also flatten the wake for water skiing.\u003c\/li\u003e\n\u003cli\u003eWhat boats and motors is the Davis Whale Tail XL designed for? The Davis Whale Tail XL mounts on the anti-cavitation plate of all inboard\/outboard and outboard motors. It is designed to improve performance on boats with these motor configurations and can be used year-round in freshwater or saltwater.\u003c\/li\u003e\n\u003cli\u003eHow is the Davis Whale Tail XL Stabilizer installed? The Whale Tail XL mounts to the anti-cavitation plate above the propeller. Clamp it in position, drill four 1\/4-inch holes through the plate using the Whale Tail as a guide, then install the supplied bolts, washers, and nuts. Do not over-tighten the hardware. The product is designed for installation in about 15 minutes.\u003c\/li\u003e\n\u003cli\u003eWhat is the Davis Whale Tail XL made from? The Davis Whale Tail XL is made from marine-grade aluminum with a durable anodized finish. The stabilizer includes stainless steel hardware for installation.\u003c\/li\u003e\n\u003cli\u003eCan the Davis Whale Tail XL help with water skiing? Yes. The Davis Whale Tail XL is designed to flatten the wake for water skiing and help skiers get up in less time. Its design uses prop wash energy to create lift for immediate response when the throttle is applied.\u003c\/li\u003e\n\u003cli\u003eAre there special installation instructions for Volvo inboard\/outboards? Yes. On Volvo inboard\/outboards, the Whale Tail XL should be mounted on top of the anti-cavitation plate and drilled through the hollow exhaust anti-cavitation plate. Longer 1\/4 x 2-inch bolts are re…\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davis Instruments","offers":[{"title":"Default Title","offer_id":50581606629634,"sku":"DAV-448","price":173.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/DAV-448__41041.1722497831_ff4bd750-728d-4182-bfd7-d1ded2c5c3a5.jpg?v=1791077592"},{"product_id":"davis-lil-fella-trolling-plate","title":"Davis Instruments Lil Fella Trolling Plate","description":"\u003cp\u003eDavis Lil' Fella Trolling Plate\u003c\/p\u003e\u003cp\u003eThe Davis Lil' Fella Trolling Plate is a fisherman's answer to correct trolling speed. This trolling plate is the little brother to the Davis Happy Troller, and is for use with outboard motors up to 25 HP. The Lil Fella trolling plate is constructed of the highest quality polycarbonates with stainless steel hardware. Plate locks \"down\" for trolling and locks \"up\" for cruising. Installing the Lil' Fella is easy. This trolling plate comes complete with stainless steel mounting hardware and installation instructions.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eFor outboards up to 25 HP\u003c\/p\u003e\u003cp\u003eLocks \"down\" for trolling, \"up\" for cruising\u003c\/p\u003e\u003cp\u003eComes with full installation and operating instructions\u003c\/p\u003e\u003cp\u003eMounting hardware included\u003c\/p\u003e\u003cp\u003eOne year warranty\u003c\/p\u003e\u003cp\u003eFor outboard motors over 25 HP, check out the Davis Happy Troller\u003c\/p\u003e\u003cp\u003eClick to Download Davis Lil Fella Trolling Plate Instructions\u003c\/p\u003e","brand":"Davis Instruments","offers":[{"title":"Default Title","offer_id":50581606695170,"sku":"DAV-462","price":173.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/Lil-Fella__97405.1722371054.webp?v=1791077594"},{"product_id":"davis-quick-fist-rubber-clamp-pair","title":"Davis Instruments QUICK FIST RUBBER CLAMP-PR","description":"\u003cp\u003eDavis Quick Fist Rubber Clamp - Pair\u003c\/p\u003e\u003cp\u003eSecuring equipment is simple with the Davis Quick Fist Rubber Clamp. Quick Fist is a rubber clamp that mounts easily to surfaces to keep tools and equipment firmly in place. These clips are made of heavy duty transportation-grade rubber and are UV-resistant. Quick Fist clamps hold up in extreme heat and cold and will not rust or corrode, making them great for marine use. Quick Fist clamps mount easily  with #10 bolts or screws.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003ePackage includes 2 clamps\u003c\/p\u003e\u003cp\u003eHolds objects from 7\/8\" to 2-1\/4\" in diameter\u003c\/p\u003e\u003cp\u003eEach clamp supports approximately 22 lbs.\u003c\/p\u003e\u003cp\u003eMounting base measures 7\/8 x 2-3\/4\"\u003c\/p\u003e","brand":"Davis Instruments","offers":[{"title":"Default Title","offer_id":50581606793474,"sku":"DAV-540","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/540__67610.1722348156_e8966f09-35fa-4d47-9d86-482dab60841e.jpg?v=1791077595"},{"product_id":"davis-fiberglass-stain-remover","title":"Davis Instruments Fsr Fiberglass Stain Remover 16Oz","description":"\u003cp\u003eDavis Fiberglass Stain Remover 16oz\u003c\/p\u003e\u003cp\u003eThe Davis Fiberglass Stain Remover is a unique stain absorbing gel that is ideal for removing oil, rust, exhaust, waterline and transom stains. This stain remover can be used anywhere fiberglass stains may occur - show stalls, furniture, etc. Can also be used for removing road soil from trailered boats and recreational vehicles. Davis Fiberglass Stain Remover is non-abrasive, so it's safe to use on white painted surfaces as well as on gel-coat.\u003c\/p\u003e\u003cp\u003eDavis Fiberglass Remover requires no sanding or compounding. Shake first, then simply apply with a brush, sponge or cloth. Wait a few minutes and then wipe off or rinse. Repeat for stubborn stains.\u003c\/p\u003e\u003cp\u003eColor of the product may vary\u003c\/p\u003e\u003cp\u003eKey Features:\u003c\/p\u003e\u003cp\u003e16 fl. oz.\u003c\/p\u003e\u003cp\u003eNon-abrasive, safe on most surfaces\u003c\/p\u003e\u003cp\u003eSimple application with a brush, sponge or cloth\u003c\/p\u003e\u003cp\u003eClick to Download Davis Fiberglass Stain Remover Instructions\u003c\/p\u003e","brand":"Davis Instruments","offers":[{"title":"Default Title","offer_id":50581606859010,"sku":"DAV-790","price":22.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/FSR__58992.1739462642_1fc5f5ce-a78c-40f3-ba8f-b47b3797a289.webp?v=1791077596"},{"product_id":"davis-fsr-fiberglass-stain-remover","title":"Davis Instruments FSR Fiberglass Stain Remover","description":"\u003cp\u003eDavis FSR Fiberglass Stain Remover Gel - 2 Liter\u003c\/p\u003e\u003cp\u003eDavis Fiberglass Stain Remover is a unique stain absorbing gel that is ideal for removing oil, rust, exhaust, waterline and transom stains. Its non-abrasive quality makes it safe to use on white painted surfaces as well as on gel-coat. Use FSR anywhere fiberglass stains may pop up including shower stalls and furniture. Can also be used to remove road soil from trailered boats and recreational vehicles. Davis Fiberglass Stain Remover is easy to use and doesn't require any sanding or compounding-simply apply, wait, then rinse off.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003e2 Liter (67.8 fl oz) bottle\u003c\/p\u003e\u003cp\u003eNon-abrasive, safe on most surfaces\u003c\/p\u003e\u003cp\u003eSimple application with a brush, sponge, or cloth\u003c\/p\u003e\u003cp\u003eRemoves oil, rust, exhaust, waterline, and transom stains\u003c\/p\u003e\u003cp\u003eHow to Use Davis Fiberglass Stain Remover Gel\u003c\/p\u003e\u003cp\u003eShake well before using.\u003c\/p\u003e\u003cp\u003eTest a small area first to be sure FSR will not damage finish.\u003c\/p\u003e\u003cp\u003eApply with cloth, brush or sponge.\u003c\/p\u003e\u003cp\u003eAllow to stand for a few minutes.\u003c\/p\u003e\u003cp\u003eWipe off or rinse with water.\u003c\/p\u003e\u003cp\u003eRepeat for stubborn stains\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is Davis FSR Fiberglass Stain Remover Gel used for? Davis FSR Fiberglass Stain Remover Gel is a non-abrasive gel designed to remove oil, rust, exhaust, waterline, and transom stains. It can be used on fiberglass stains, white painted surfaces, gel-coat, shower stalls, furniture, and road soil on trailered boats and recreational vehicles.\u003c\/li\u003e\n\u003cli\u003eIs Davis FSR Fiberglass Stain Remover Gel safe to use on gel-coat? Yes. Davis FSR is described as non-abrasive and safe to use on gel-coat and white painted surfaces. The instructions recommend testing a small area first to make sure the product will not damage the finish.\u003c\/li\u003e\n\u003cli\u003eHow do you use Davis FSR Fiberglass Stain Remover Gel? Shake the gel well before use, then apply it with a cloth, brush, or sponge. Allow it to stand for a few minutes before wiping it off or rinsing with water. Repeat the application for stubborn stains.\u003c\/li\u003e\n\u003cli\u003eWhat types of stains can Davis FSR remove? Davis FSR Fiberglass Stain Remover Gel is formulated to remove oil, rust, exhaust, waterline, and transom stains. It can also be used to remove road soil from trailered boats and recreational vehicles.\u003c\/li\u003e\n\u003cli\u003eDoes Davis FSR Fiberglass Stain Remover require sanding or compounding? No. The product is designed for simple application without sanding or compounding. Apply the gel with a cloth, brush, or sponge, allow it to stand for a few minutes, then wipe it off or rinse with water.\u003c\/li\u003e\n\u003cli\u003eHow much Davis FSR Fiberglass Stain Remover Gel is included? The Davis FSR Fiberglass Stain Remover Gel is supplied in a 2-liter bottle, equivalent to 67.8 fluid ounces. The non-abrasive formula can be applied with a brush, sponge, or cloth as directed.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davis Instruments","offers":[{"title":"Default Title","offer_id":50581606924546,"sku":"DAV-792","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/792__64077.1722492244_fbd5f831-184c-4e20-b0c8-fa18d798916d.webp?v=1791077597"},{"product_id":"davis-sailing-air-flow-tels","title":"Davis Instruments Air-Flow Tels Set Of 14","description":"\u003cp\u003eDavis Sailing Air-Flow Tels\u003c\/p\u003e\u003cp\u003eThese lightweight, ripstop nylon Air-Flow Tels attach to sails with waterproof adhesive locator disks-no holes required! Use Tels to see the air flow across the sails; this allows you to traim sails for maximum performance. The result is better boat speed, less pinching, and no guesswork about placing the jib sheet lead forward or aft.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eComes with 14 High Visibility Tels (in red and green)\u003c\/p\u003e\u003cp\u003eNo hole required\u003c\/p\u003e\u003cp\u003eClick to Download Davis Air-Flow Tels Instructions\u003c\/p\u003e","brand":"Davis Instruments","offers":[{"title":"Default Title","offer_id":50581607022850,"sku":"DAV-950","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/DAV-950__23036.1722354009_bb0d86e3-d4db-404f-ab57-fdb9ffcb1637.webp?v=1791077598"}],"url":"https:\/\/allmarineworld.com\/collections\/davis-instruments.oembed","provider":"All Marine World","version":"1.0","type":"link"}