{"title":"Adhesive","description":"\u003cp\u003eAdhesive currently published by All Marine World.\u003c\/p\u003e","products":[{"product_id":"3m-5200-polyurethane-adhesive-sealant","title":"3M 5200 Polyurethane Adhesive Sealant","description":"\u003cp\u003e3M Marine Adhesive Sealant 5200\u003c\/p\u003e\u003cp\u003e3M's 5200 Adhesive Sealant is a one-part polyurethane used for permanent bonding. 5200 offers permanent adhesion to wood, gelcoat, and fiberglass, and forms watertight seals. Designed for the marine industry, this sealant forms bonds that are resistant to saltwater and weathering. This sealant is flexible, allowing for structural movement and dissipation of stress that may be caused by vibration, swelling, shrinking or shock. 3M 5200 achieves handling strength in 48 hours and has been trusted throughout the marine industry for over 50 years.\u003c\/p\u003e\u003cp\u003e3M 5200 Adhesive Sealant is recommended for the following applications; fiberglass deck to hull, through hull fittings, wood to fiberglass, portholes and deck fittings, motors on fiberglass transoms, under moldings, hull seams above and below water line, and deck housing.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eHigh performance, one-part polyurethane.\u003c\/p\u003e\u003cp\u003eExtremely strong and retains its strength above or below the waterline.\u003c\/p\u003e\u003cp\u003eStays flexible.\u003c\/p\u003e\u003cp\u003eWatertight bonding\/sealing of fiberglass, gelcoat and wood.\u003c\/p\u003e\u003cp\u003eBest when NO Removal is anticipated.\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eAdhesive Type: Polyurethane\u003c\/p\u003e\u003cp\u003eApplication Method: Hand or pressure caulk\u003c\/p\u003e\u003cp\u003eTack Free Time: 12 Hour, 48 Hour\u003c\/p\u003e\u003cp\u003eTensile Strength: 700 psi\u003c\/p\u003e\u003cp\u003e3M 5200 Adhesive Sealant Application Information:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eClean all surfaces before application. It is recommended to use an adhesive cleaner.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eCut the nozzle to desired bead size.\u003c\/p\u003e\u003cp\u003ePuncture seal inside the threaded nozzle end and screw on nozzle.\u003c\/p\u003e\u003cp\u003eApply 3M 5200 to the seam or part to be bonded. Tool material to desired appearance.\u003c\/p\u003e\u003cp\u003eRemove excess material with adhesive cleaner.\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is 3M Marine Adhesive Sealant 5200 used for? 3M Marine Adhesive Sealant 5200 is a one-part polyurethane designed for permanent bonding and watertight sealing of wood, gelcoat, and fiberglass. Recommended marine applications include fiberglass deck-to-hull joints, through-hull fittings, wood-to-fiberglass bonding, portholes, deck fittings, motors on fiberglass transoms, under moldings, hull seams, and deck housing.\u003c\/li\u003e\n\u003cli\u003eCan 3M 5200 Adhesive Sealant be used above and below the waterline? Yes. 3M 5200 Adhesive Sealant forms watertight bonds and retains its strength above or below the waterline. It is also resistant to saltwater and weathering, making it suitable for the marine applications specified in the product description.\u003c\/li\u003e\n\u003cli\u003eIs 3M 5200 Adhesive Sealant designed for permanent bonding? Yes. 3M 5200 is designed for permanent adhesion and is best suited for applications where removal is not anticipated. It provides strong bonds to wood, gelcoat, and fiberglass while remaining flexible to accommodate structural movement.\u003c\/li\u003e\n\u003cli\u003eHow long does 3M Marine Adhesive Sealant 5200 take to reach handling strength? 3M 5200 Adhesive Sealant achieves handling strength in 48 hours. The listed specifications include a tack-free time of 12 hours and 48 hours.\u003c\/li\u003e\n\u003cli\u003eHow do you apply 3M Marine Adhesive Sealant 5200? Clean all surfaces before application, using an adhesive cleaner as recommended. Cut the nozzle to the desired bead size, puncture the seal inside the threaded nozzle end, and attach the nozzle. Apply 3M 5200 to the seam or part, tool it to the desired appearance, and remove excess material with adhesive cleaner.\u003c\/li\u003e\n\u003cli\u003eWhat are the specifications of 3M 5200 Adhesive Sealant? 3M 5200 is a high-performance, one-part polyurethane adhesive sealant applied by hand or pressure caulk. It has a listed tensile strength of 700 psi and is formulated to remain flexible while providing watertight bonding and sealing of fiberglass, gelcoat, and wood.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"3M","offers":[{"title":"3oz Black","offer_id":50581463138562,"sku":"3-M-05205","price":33.89,"currency_code":"USD","in_stock":true},{"title":"3oz White","offer_id":50581463171330,"sku":"3-M-05203","price":33.89,"currency_code":"USD","in_stock":false},{"title":"10oz Black","offer_id":50581463204098,"sku":"3-M-06504","price":50.99,"currency_code":"USD","in_stock":true},{"title":"10oz White","offer_id":50581463236866,"sku":"3-M-06500","price":59.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/383120_source_1528479017_258c6dbd-fb54-442c-b7f2-54b0e7183a52.webp?v=1791076520"},{"product_id":"3m-5200-polyurethane-fast-cure-adhesive-sealant","title":"3M 5200 Polyurethane Fast Cure Adhesive-Sealant","description":"\u003cp\u003e3M 5200 Polyurethane Fast Cure Adhesive-Sealant\u003c\/p\u003e\u003cp\u003e3M 5200 Polyurethane Fast Cure Adhesive Sealant is a one-component sealant designed to meet the high demands of the marine environment. 5200 Fast Cure provides strong watertight bonds and has permanent adhesion to wood, gelcoat, and fiberglass. 3M designed this sealant to be flexible, it allows for structural movement and dissipation of stress that may be caused by vibration, swelling, shrinking or shock.\u003c\/p\u003e\u003cp\u003e5200 Fast Cure Sealant creates tough bonds above or below the waterline and is ideal for the following applications: fiberglass deck to hull, through hull fittings, wood to fiberglass, portholes and deck fittings, motors on fiberglass transoms, under moldings, hull seams above and below water line, and deck housing.\u003c\/p\u003e\u003cp\u003eFaster curing version of 3M 5200.\u003c\/p\u003e\u003cp\u003eExtremely strong and retains its strength above or below the waterline.\u003c\/p\u003e\u003cp\u003eStays flexible.\u003c\/p\u003e\u003cp\u003eWatertight bonding\/sealing of fiberglass, gelcoat and wood.\u003c\/p\u003e\u003cp\u003eBest when NO Removal is anticipated.\u003c\/p\u003e\u003cp\u003eColor is white.\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eAdhesive Type: Polyurethane\u003c\/p\u003e\u003cp\u003eApplication: Hand or pressure caulk\u003c\/p\u003e\u003cp\u003eTack-free Time: 1 Hour\u003c\/p\u003e\u003cp\u003e3M 5200 Polyurethane Fast Cure Adhesive Sealant Application Information:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eClean all surfaces before application. It is recommended to use an adhesive cleaner.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eCut the nozzle to desired bead size.\u003c\/p\u003e\u003cp\u003ePuncture seal inside the threaded nozzle end and screw on nozzle.\u003c\/p\u003e\u003cp\u003eApply 3M 5200 Fast Cure to the seam or part to be bonded. Tool material to desired appearance.\u003c\/p\u003e\u003cp\u003eRemove excess material with adhesive cleaner.\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is 3M 5200 Polyurethane Fast Cure Adhesive-Sealant used for? 3M 5200 Polyurethane Fast Cure Adhesive-Sealant is a one-component marine sealant designed to create strong, watertight bonds above or below the waterline. It can be used for applications such as fiberglass deck-to-hull joints, through-hull fittings, wood-to-fiberglass bonding, portholes, deck fittings, hull seams, and deck housings.\u003c\/li\u003e\n\u003cli\u003eWhat materials can 3M 5200 Fast Cure bond and seal? 3M 5200 Fast Cure provides permanent adhesion to wood, gelcoat, and fiberglass. It is formulated to remain flexible, allowing the bonded materials to accommodate movement and stress caused by vibration, swelling, shrinking, or shock while maintaining a watertight seal.\u003c\/li\u003e\n\u003cli\u003eCan 3M 5200 Fast Cure be used above and below the waterline? Yes. 3M 5200 Fast Cure is designed for strong, watertight bonding and sealing both above and below the waterline. The product description specifically lists applications including hull seams, through-hull fittings, and other marine components in these areas.\u003c\/li\u003e\n\u003cli\u003eIs 3M 5200 Fast Cure intended for applications where removal may be needed? 3M 5200 Fast Cure is best suited for applications where no removal is anticipated. It forms a permanent bond and is designed to retain its strength while remaining flexible in the marine environment.\u003c\/li\u003e\n\u003cli\u003eHow should 3M 5200 Fast Cure Adhesive-Sealant be applied? Clean all surfaces before application, with an adhesive cleaner recommended. Cut the nozzle to the desired bead size, puncture the seal inside the threaded nozzle end, and attach the nozzle. Apply the sealant to the seam or parts being bonded and tool it to the desired appearance. Remove excess material with adhesive cleaner.\u003c\/li\u003e\n\u003cli\u003eHow quickly does 3M 5200 Fast Cure become tack-free? 3M 5200 Polyurethane Fast Cure Adhesive-Sealant has a listed tack-free time of approximately 1 hour. The sealant is a one-component polyurethane product and can be applied by hand or with a pressure caulk application method.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"3M","offers":[{"title":"3oz White","offer_id":50581463433474,"sku":"3-M-05220","price":41.19,"currency_code":"USD","in_stock":true},{"title":"10oz White","offer_id":50581463466242,"sku":"3-M-06520","price":64.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/5200_Fast_Cure__59970.1722509987.webp?v=1791076522"},{"product_id":"3m-4200-polyurethane-fast-cure-adhesive-sealant-10oz-white","title":"3M 4200 Adhesive-Fast Cure-White Cart","description":"\u003cp\u003e3M 4200 Polyurethane Fast Cure Adhesive-Sealant 10oz White\u003c\/p\u003e\u003cp\u003e3M Fast Cure Marine Sealant is a one-component, medium-strength, moisture-curing, gap-filling polyurethane that delivers strong flexible bonds to aluminum, wood, gelcoat, and fiberglass. It forms a watertight, weather-resistant seal above and below the waterline. It's flexibility allows for dissipation of stress caused by shock, vibration, swelling, or shrinking. This sealant is recommended for the following applications: fiberglass deck to hull, wood to fiberglass, portholes, deck fittings, rubrail attachment, sealing screwholes, and stanchion supports.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eMedium strength marine bonding allows for disassembly\u003c\/p\u003e\u003cp\u003eFormulated for fast cure, providing rapid results\u003c\/p\u003e\u003cp\u003eTack-free in 1 hour and typically cures in 24 hours\u003c\/p\u003e\u003cp\u003eAbove and below the water line applications\u003c\/p\u003e\u003cp\u003eFlexible and durable adhesion withstand stress\u003c\/p\u003e\u003cp\u003eBonds to aluminum, wood, gelcoat and fiberglass\u003c\/p\u003e\u003cp\u003eColor is white.\u003c\/p\u003e\u003cp\u003eCaulking gun tube.\u003c\/p\u003e\u003cp\u003eClick to Download 3M 4200 Marine Sealant Application Instructions\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is 3M 4200 Polyurethane Fast Cure Adhesive-Sealant 10oz White used for? 3M 4200 Polyurethane Fast Cure Adhesive-Sealant is a one-component, medium-strength marine sealant designed to create flexible, watertight bonds and seals. It can be used above and below the waterline for applications such as fiberglass deck-to-hull joints, wood-to-fiberglass bonding, portholes, deck fittings, rubrail attachment, screwholes, and stanchion supports.\u003c\/li\u003e\n\u003cli\u003eWhat materials does 3M 4200 Fast Cure Marine Sealant bond to? This polyurethane adhesive-sealant is formulated to bond to aluminum, wood, gelcoat, and fiberglass. Its flexible bond helps accommodate stress associated with shock, vibration, swelling, or shrinking while maintaining adhesion.\u003c\/li\u003e\n\u003cli\u003eCan 3M 4200 Fast Cure Marine Sealant be used above and below the waterline? Yes. 3M 4200 Fast Cure Marine Sealant is designed for watertight, weather-resistant sealing applications both above and below the waterline. The product description specifically lists marine applications including deck-to-hull joints, portholes, deck fittings, rubrails, screwholes, and stanchion supports.\u003c\/li\u003e\n\u003cli\u003eHow quickly does 3M 4200 Fast Cure Marine Sealant cure? 3M 4200 Fast Cure Marine Sealant is formulated for a faster cure than a standard marine sealant. It becomes tack-free in approximately 1 hour and typically cures in 24 hours.\u003c\/li\u003e\n\u003cli\u003eIs 3M 4200 Fast Cure Marine Sealant a permanent adhesive? 3M 4200 Fast Cure Marine Sealant provides a medium-strength marine bond that allows for disassembly. Its flexible polyurethane formulation is designed to provide durable adhesion while accommodating stress from shock, vibration, swelling, or shrinking.\u003c\/li\u003e\n\u003cli\u003eHow is 3M 4200 Fast Cure Marine Sealant packaged? This white 3M 4200 Fast Cure Marine Sealant comes in a 10-ounce caulking gun tube. The tube format is intended for application with a caulking gun.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":50581463564546,"sku":"3-M-06560","price":58.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/593147__39056.1722503542_1e0d540f-a67d-4d36-9d95-23ab68207a6b.webp?v=1791076523"},{"product_id":"3m-marine-grade-clear-silicone-sealant","title":"3M Marine Grade Clear Silicone Sealant","description":"\u003cp\u003e3M Marine Grade Clear Silicone Sealant\u003c\/p\u003e\u003cp\u003eThis high quality silicone sealant is a one-component cure, sealant engineered to withstand the harsh marine environment. This weather-resistant sealant is formulated to resist mildew and form a non-yellowing seal for above waterline applications. In addition, this marine sealant is high-temperature resistant and remains flexible even after years of exposure. The non-shrinking and non-sagging properties of this product offer simple and efficient application.\u003c\/p\u003e\u003cp\u003eHigh quality silicone sealant\u003c\/p\u003e\u003cp\u003eFor above the waterline interior\/exterior sealing\u003c\/p\u003e\u003cp\u003eAdheres to bare and painted metal, fiberglass, glass, non-oily woods, many plastics and abraded rubber\u003c\/p\u003e\u003cp\u003eExcellent discoloration resistance\u003c\/p\u003e\u003cp\u003eMildew-resistant\u003c\/p\u003e\u003cp\u003eMoisture-curing\u003c\/p\u003e\u003cp\u003eSpecifications;\u003c\/p\u003e\u003cp\u003eColor: Clear\u003c\/p\u003e\u003cp\u003eFull Cure: 24-48 Hours\u003c\/p\u003e\u003cp\u003eTack Free Time: 20 Minutes\u003c\/p\u003e\u003cp\u003eTensile Strength (imperial): 220 psi\u003c\/p\u003e\u003cp\u003eApplication Method: Hand or pressure caulk\u003c\/p\u003e\u003cp\u003eApplication Temperature: 40°-100°F\u003c\/p\u003e","brand":"3M","offers":[{"title":"3oz","offer_id":50581463695618,"sku":"3-M-08019","price":37.69,"currency_code":"USD","in_stock":true},{"title":"10 oz","offer_id":50581463728386,"sku":"3-M-08029","price":63.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/s-m-08019_lg__54436.1722506277_31f38173-00a4-44a5-945f-8ab1565bf11e.jpg?v=1791076525"},{"product_id":"303-touchless-sealant","title":"303 Products Touchless Sealant","description":"\u003cp\u003e303 Touchless Sealant\u003c\/p\u003e\u003cp\u003eThe 303 Touchless Sealant is designed to be an effective alternative to waxing your vehicle. Designed to be effective in both salt and freshwater environments. The Si02 has been modified to be more like a liquefied glass with a hydrophobic component to aid in water repellency and durability. This formula is both biodegradable and marine safe.\u003c\/p\u003e\u003cp\u003e303 Touchless Sealant is designed to be effective on gel coat, fiberglass, metal, plastic, and clear vinyl surfaces as well as windshields and wheels.\u003c\/p\u003e\u003cp\u003eFeature:\u003c\/p\u003e\u003cp\u003eMade in USA\u003c\/p\u003e\u003cp\u003eSalt\/Freshwater Effective\u003c\/p\u003e\u003cp\u003eLasts up to 6 Months\u003c\/p\u003e\u003cp\u003eBiodegradable \u0026amp; Marine safe\u003c\/p\u003e\u003cp\u003eApplication Instructions\u003c\/p\u003e\u003cp\u003eAfter Washing your boat and while the surface is still WET and OUT of Direct Sunlight spray a small amount evenly across the surface\u003c\/p\u003e\u003cp\u003eIt is best to work ONE Section at a time using only a light mist of product.\u003c\/p\u003e\u003cp\u003eImmediately rinse the section off. You will sees water beading on the surface meaning it is now protected\u003c\/p\u003e\u003cp\u003eRepeat this process across the entirety of the boat and then dry thoroughly with a waffle weave drying or microfiber towel.\u003c\/p\u003e\u003cp\u003eProduct Application Tips\u003c\/p\u003e\u003cp\u003eRinse the product off each section thoroughly immediately after applying product\u003c\/p\u003e\u003cp\u003eDo NOT let dry on the surface as this may cause water spots\u003c\/p\u003e\u003cp\u003eIf too much product is used and not rinsed off thoroughly this could also lead to water spots and streaks\u003c\/p\u003e\u003cp\u003eIf water spots do occur, rinse the area and dry again\u003c\/p\u003e","brand":"303 Products","offers":[{"title":"32 oz","offer_id":50581466185986,"sku":"303-30398","price":27.65,"currency_code":"USD","in_stock":false},{"title":"Gallon (128 oz)","offer_id":50581466218754,"sku":"303-30399","price":90.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/888851_source_1674845191_a315da80-74ea-43d1-8381-9860a2a54a14.jpg?v=1791076537"},{"product_id":"beckson-3-5-x-12-self-adhesive-non-skid-step-pad","title":"Beckson Marine Step Pad Self Adh. White 3X12","description":"\u003cp\u003eBeckson 3.5\" X 12\" Self-Adhesive Non-Skid Step Pad\u003c\/p\u003e\u003cp\u003eThis item has been discontinued by the manufacturer and is no longer available.\u003c\/p\u003e\u003cp\u003eThis Beckson Self-Adhesive Non-Skid Step Pad is self-adhesive and easily cut for a custom fit. A heavy-duty 3\" wide tread pad for stepping surfaces, this non-skid step pad will not crack or discolor. It is designed to withstand salt water and low temperatures.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eSelf-Adhesive\u003c\/p\u003e\u003cp\u003eNon-Skid\u003c\/p\u003e\u003cp\u003eEasily Cut For Custom Fit\u003c\/p\u003e\u003cp\u003eHeavy Duty\u003c\/p\u003e\u003cp\u003eCrack Resistant\u003c\/p\u003e\u003cp\u003eDiscolor Resistant\u003c\/p\u003e\u003cp\u003eWithstands Salt Water and Low Temperatures\u003c\/p\u003e\u003cp\u003eSold In Pairs\u003c\/p\u003e","brand":"Beckson Marine","offers":[{"title":"Default Title","offer_id":50581537423618,"sku":"BEC-SM-1W","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/865683_source_1539618835.jpg?v=1791077027"},{"product_id":"life-calk-polysulfied-sealant","title":"Boat Life Life Calk Polysulfied Sealant","description":"\u003cp\u003eBoatlife Life Calk Polysulfide Sealant\u003c\/p\u003e\u003cp\u003eBoatlife's Life-Calk is a long lasting, permanently flexible marine polysulfide sealant which can be sanded, painted, and used above and below the waterline. Life Calk Sealant is tack-free in 1 to 3 days, and fully cures in 7-10 days (weather dependent). This polysulfide sealant has excellent resistance to teak oils, gasoline and diesel fuel. Boatlife Life-Calk is ideal for teak decks, to bed deck and hull hardware, seal thru-hull fittings, and underwater seams.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eWill bond to fiberglass, wood, metal, glass, and itself.\u003c\/p\u003e\u003cp\u003eCures to a firm flexible rubber seal with excellent waterproofing and adhesion qualities.\u003c\/p\u003e\u003cp\u003eCan be applied underwater for emergency repairs.\u003c\/p\u003e\u003cp\u003eCan be applied to damp surfaces.\u003c\/p\u003e\u003cp\u003eSizes Available:\u003c\/p\u003e\u003cp\u003eSqueeze Tube\u003c\/p\u003e\u003cp\u003e1 oz\u003c\/p\u003e\u003cp\u003e2.8 oz\u003c\/p\u003e\u003cp\u003eCartridge (for caulking gun)\u003c\/p\u003e\u003cp\u003e5.2 oz\u003c\/p\u003e\u003cp\u003e10.6 oz\u003c\/p\u003e\u003cp\u003e**Not compatible with all paints - Sikkens, Cetol, Deks, Olje\u003c\/p\u003e\u003cp\u003e***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***\u003c\/p\u003e\u003cp\u003eTips for Using Boatlife's Life-Calk Sealant\u003c\/p\u003e\u003cp\u003eTo speed cure time, spray a little water onto one-part Life-Calk\u003c\/p\u003e\u003cp\u003eTo clean up tools, equipment and uncured Life-Calk, use Boatlife Life-Calk Solvent and Cleaner or Boatlife Release.\u003c\/p\u003e\u003cp\u003eIn cold areas, warm cartridges and tubes before use.\u003c\/p\u003e","brand":"Boat Life","offers":[{"title":"1oz White Tube","offer_id":50581543977218,"sku":"BOA-1305","price":13.99,"currency_code":"USD","in_stock":false},{"title":"2.8oz Black Tube","offer_id":50581544009986,"sku":"BOA-1031","price":22.49,"currency_code":"USD","in_stock":true},{"title":"2.8oz White Tube","offer_id":50581544042754,"sku":"BOA-1030","price":22.49,"currency_code":"USD","in_stock":true},{"title":"5.2oz White Cartridge","offer_id":50581544075522,"sku":"BOA-1372","price":25.49,"currency_code":"USD","in_stock":false},{"title":"10.6oz Black Cartridge","offer_id":50581544108290,"sku":"BOA-1034","price":40.99,"currency_code":"USD","in_stock":false},{"title":"10.6oz White Cartridge","offer_id":50581544141058,"sku":"BOA-1033","price":42.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/383498_source_1528478465_bd6dd4ed-b2fe-496a-add5-e8829e8f7d4e.jpg?v=1791077089"},{"product_id":"boatlife-life-seal-silicone-polyurethane-sealant","title":"Boat Life Boatlife Life-Seal Silicone-Polyurethane Sealant","description":"\u003cp\u003eBoatlife Life-Seal Silicone-Polyurethane Sealant\u003c\/p\u003e\u003cp\u003eBoatlife Life-Seal is a unique combination of marine silicone and polyurethane, formulated especially for fiberglass. LifeSeal offers a fast-curing, low odor, high adhesion, non-sagging, non-corrosive, non-yellowing formula. It provides a durable permanent watertight seal for joints subject to structural movement. May be used above and below the waterline. Use for sealing decks to hulls, thru-hull fittings, vinyl ports, sealing\/glazing windshields and bedding marine hardware.\u003c\/p\u003e\u003cp\u003eWill adhere to metal, glass, wood, Lexan, ABS, and certain other materials.\u003c\/p\u003e\u003cp\u003eCan be removed without damaging gel-coat.\u003c\/p\u003e\u003cp\u003eNot recommended for ferro cement hulls, impregnated wood or oil-soaked materials.\u003c\/p\u003e\u003cp\u003eCures in presence of water.\u003c\/p\u003e\u003cp\u003eMildew resistant and acid free.\u003c\/p\u003e\u003cp\u003eSizes Available:\u003c\/p\u003e\u003cp\u003eSqueeze Tube\u003c\/p\u003e\u003cp\u003e1 oz\u003c\/p\u003e\u003cp\u003e2.8 oz\u003c\/p\u003e\u003cp\u003eCartridge (for caulking gun)\u003c\/p\u003e\u003cp\u003e10.6 oz\u003c\/p\u003e\u003cp\u003e***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***\u003c\/p\u003e\u003cp\u003eHow to Use Boatlife Life Seal Sealant\u003c\/p\u003e\u003cp\u003eBefore applying, ensure entire surface is clean and oil free.\u003c\/p\u003e\u003cp\u003eLife Seal can either be applied using the squeeze tube or via caulking gun (using 10.6 oz cartridge)\u003c\/p\u003e\u003cp\u003eLife Seal will skin over in 10 minutes.\u003c\/p\u003e\u003cp\u003eAllow 24 hours to fully cure.\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is Boatlife Life-Seal Silicone-Polyurethane Sealant used for? Boatlife Life-Seal Silicone-Polyurethane Sealant is a marine sealant formulated especially for fiberglass. It provides a durable, watertight seal for joints subject to structural movement and can be used above or below the waterline for applications such as decks to hulls, thru-hull fittings, vinyl ports, windshields, and marine hardware.\u003c\/li\u003e\n\u003cli\u003eWhat materials can Boatlife Life-Seal adhere to? Boatlife Life-Seal is designed to adhere to fiberglass and can also adhere to metal, glass, wood, Lexan, ABS, and certain other materials. Surfaces should be clean and free of oil before application to help ensure proper adhesion.\u003c\/li\u003e\n\u003cli\u003eCan Boatlife Life-Seal be used above and below the waterline? Yes. Boatlife Life-Seal can be used for marine sealing applications both above and below the waterline. It cures in the presence of water and is formulated to provide a permanent watertight seal while accommodating structural movement.\u003c\/li\u003e\n\u003cli\u003eHow do I apply Boatlife Life-Seal Sealant? Before application, make sure the entire surface is clean and oil free. Life-Seal can be applied directly from the squeeze tube or with a caulking gun when using the 10.6 oz cartridge. Apply the sealant to the intended joint or area and allow it to cure according to the stated curing time.\u003c\/li\u003e\n\u003cli\u003eHow long does Boatlife Life-Seal take to cure? Boatlife Life-Seal skins over in approximately 10 minutes and requires 24 hours to fully cure. The product is formulated as a fast-curing marine sealant and can cure in the presence of water.\u003c\/li\u003e\n\u003cli\u003eWhere should Boatlife Life-Seal not be used? Boatlife Life-Seal is not recommended for ferro cement hulls, impregnated wood, or oil-soaked materials. Before application, surfaces should be clean and free of oil. The product description also identifies fiberglass as its specifically formulated application material.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Boat Life","offers":[{"title":"1oz Clear Tube","offer_id":50581544337666,"sku":"BOA-1109","price":13.99,"currency_code":"USD","in_stock":true},{"title":"2.8oz Clear Tube","offer_id":50581544370434,"sku":"BOA-1160","price":19.49,"currency_code":"USD","in_stock":true},{"title":"10.6oz Black Cartridge","offer_id":50581544403202,"sku":"BOA-1171","price":35.99,"currency_code":"USD","in_stock":true},{"title":"10.6oz Clear Cartridge","offer_id":50581544435970,"sku":"BOA-1169","price":35.99,"currency_code":"USD","in_stock":false},{"title":"10.6oz White Cartridge","offer_id":50581544468738,"sku":"BOA-1170","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/383705_source_1528478034_5cafbc59-f309-492f-83e3-8b974ee3c416.jpg?v=1791077092"},{"product_id":"boatlife-marine-silicone-rubber-sealant","title":"Boat Life Boatlife Marine Silicone Rubber Sealant","description":"\u003cp\u003eBoatlife Marine Silicone Rubber Sealant\u003c\/p\u003e\u003cp\u003eBoatlife Marine Silicone Rubber Sealant is an all-purpose, 100% marine high quality silicone sealant. This sealant is non-corrosive, acid-free, non-yellowing, mildew-resistant, and low-odor. This silicone rubber sealant is for use above or below the waterline. Features superior flexibility and adhesion to fiberglass, plastic, metal, and wood. Boatlife's Silicone Rubber Sealant retains flexibility and tensile strength even after years of exposure. This product is great for applications where speed is important - it is tack-free in 30 minutes or less and fully cured in 24 hours.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eAll-purpose high quality silicone sealant\u003c\/p\u003e\u003cp\u003eWill not shrink, crack, or dry out\u003c\/p\u003e\u003cp\u003eRetains flexibility and tensile strength after years of exposure\u003c\/p\u003e\u003cp\u003eWill not corrode metal or electronics\u003c\/p\u003e\u003cp\u003eNeutral curing system\u003c\/p\u003e\u003cp\u003eSizes Available:\u003c\/p\u003e\u003cp\u003eSqueeze Tube\u003c\/p\u003e\u003cp\u003e1 oz\u003c\/p\u003e\u003cp\u003e2.8 oz\u003c\/p\u003e\u003cp\u003eCartridge (for caulking gun)\u003c\/p\u003e\u003cp\u003e10.6 oz\u003c\/p\u003e\u003cp\u003e***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is Boatlife Marine Silicone Rubber Sealant used for? Boatlife Marine Silicone Rubber Sealant is an all-purpose 100% silicone sealant for marine applications above or below the waterline. It provides flexible adhesion to fiberglass, plastic, metal, and wood and is designed to retain its flexibility and tensile strength after prolonged exposure.\u003c\/li\u003e\n\u003cli\u003eCan Boatlife Marine Silicone Rubber Sealant be used above and below the waterline? Yes. Boatlife Marine Silicone Rubber Sealant is formulated for use both above and below the waterline. It is suitable for applications involving fiberglass, plastic, metal, and wood where a flexible marine silicone sealant is needed.\u003c\/li\u003e\n\u003cli\u003eHow quickly does Boatlife Marine Silicone Rubber Sealant cure? Boatlife Marine Silicone Rubber Sealant becomes tack-free in 30 minutes or less and fully cures in approximately 24 hours. Its relatively fast tack-free time makes it suitable for applications where a quick initial set is important.\u003c\/li\u003e\n\u003cli\u003eIs Boatlife Marine Silicone Rubber Sealant safe for use around metal and electronics? Yes. The sealant uses a neutral curing system and is described as non-corrosive and acid-free. It is also formulated not to corrode metal or electronics, making it suitable for applications where these materials may be present.\u003c\/li\u003e\n\u003cli\u003eWhat sizes of Boatlife Marine Silicone Rubber Sealant are available? Boatlife Marine Silicone Rubber Sealant is available in squeeze tubes and cartridges. Squeeze tube sizes include 1 oz and 2.8 oz, while the cartridge size is 10.6 oz and is designed for use with a caulking gun.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Boat Life","offers":[{"title":"1oz Clear Tube","offer_id":50581546139906,"sku":"BOA-1110","price":13.49,"currency_code":"USD","in_stock":true},{"title":"2.8oz Clear Tube","offer_id":50581546172674,"sku":"BOA-1140","price":14.99,"currency_code":"USD","in_stock":false},{"title":"2.8oz White Tube","offer_id":50581546205442,"sku":"BOA-1141","price":14.99,"currency_code":"USD","in_stock":true},{"title":"10.6oz Clear Cartridge","offer_id":50581546238210,"sku":"BOA-1150","price":29.99,"currency_code":"USD","in_stock":true},{"title":"10.6oz White Cartridge","offer_id":50581546270978,"sku":"BOA-1151","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/383577_source_1528479259_b58b593a-81fc-4343-bae8-aca6fe06644b.jpg?v=1791077093"},{"product_id":"boatlife-release-adhesive-and-sealant-remover","title":"Boat Life Boatlife \"Release\" Adhesive and Sealant Remover","description":"\u003cp\u003eBoatlife \"Release\" Adhesive and Sealant Remover\u003c\/p\u003e\u003cp\u003eBoatlife's Release is ideal for removing cured silicone, polyurethane, and polysulfide. Use a scraping tool and Release to remove cured sealants from fiberglass, wood, metal, and glass. It is ideal on residue from decals, tapes, labels and adhesives, and is safe on most carpeted, vinyl, plastic and painted surfaces. Release simplifies the use of sealants, allowing for a fast cleanup.\u003c\/p\u003e\u003cp\u003e***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***\u003c\/p\u003e","brand":"Boat Life","offers":[{"title":"1 oz","offer_id":50581546336514,"sku":"BOA-1291","price":18.49,"currency_code":"USD","in_stock":false},{"title":"16 oz","offer_id":50581546369282,"sku":"BOA-1288","price":71.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/383881_source_1528480732.jpg?v=1791077094"},{"product_id":"flitz-ceramic-sealant","title":"Flitz Products Ceramic Sealant","description":"\u003cp\u003eFlitz Ceramic Sealant\u003c\/p\u003e\u003cp\u003eThis Ceramic Sealant by Flitz is designed to give almost any hard surface a hard-shell, water resistant finish. This long lasting protection is perfect for boats, RV's, cars, counter tops, firearms, bath fixtures and so much more. The user friendly spray bottle comes in multiple sizes and creates an instant spray on protection without needing training or equipment. The advanced formula can be applied in minutes and provides Flitz hydrophobic nano-ceramic protection. Flitz ceramic coating is made in the USA and is a perfect eco friendy economic way to protect your ride.\u003c\/p\u003e\u003cp\u003eFlitz ceramic coat offers a streak free look that will increase your shine without buffing, talc or whitening. It is resistant to sunlight and engine heat and will nto evaporate like wax. Less washing and no more waxing means you get more time out on the water.\u003c\/p\u003e\u003cp\u003eFlitz ceramic sealant seals and protects paints, clearcoats, fiberglass, gelcoats, all metals, plastics, eisenglass, glass, solid surfaces, marble, granite, quartz, and corian.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eEco Friendly\u003c\/p\u003e\u003cp\u003eWater Resistant\u003c\/p\u003e\u003cp\u003eWater based\u003c\/p\u003e\u003cp\u003eSilicone Free\u003c\/p\u003e\u003cp\u003eCiverageL\u003c\/p\u003e\u003cp\u003eStreak Free\u003c\/p\u003e\u003cp\u003eHard Shell\u003c\/p\u003e\u003cp\u003eUp to 1 Year Protection\u003c\/p\u003e\u003cp\u003eCoverage:\u003c\/p\u003e\u003cp\u003e16oz: 2,200 sq ft\u003c\/p\u003e\u003cp\u003e32oz: 4,400 sq ft\u003c\/p\u003e\u003cp\u003eProtects Against:\u003c\/p\u003e\u003cp\u003eUV Rays\u003c\/p\u003e\u003cp\u003eColor Fade\u003c\/p\u003e\u003cp\u003eSalt\u003c\/p\u003e\u003cp\u003eBrake Dust\u003c\/p\u003e\u003cp\u003eDiesel Dust\u003c\/p\u003e\u003cp\u003eCalcium\/Water Stains\u003c\/p\u003e\u003cp\u003eTarnish\u003c\/p\u003e\u003cp\u003eTire Rot\u003c\/p\u003e\u003cp\u003eOxidation\u003c\/p\u003e\u003cp\u003eDirt\u003c\/p\u003e\u003cp\u003eBugs\u003c\/p\u003e\u003cp\u003eTree Sap\u003c\/p\u003e\u003cp\u003eBird Droppings\u003c\/p\u003e\u003cp\u003eYellowed Headlights\u003c\/p\u003e\u003cp\u003eApplication Information\u003c\/p\u003e\u003cp\u003eSpray the sealant onto a clean surface and distribute with a microfiber or applicator in 3' x 3' sections. Do NOT let dry\u003c\/p\u003e\u003cp\u003eClean with a clean, dry Flitz microfiber. When saturated use a new, dry microfiber.\u003c\/p\u003e\u003cp\u003eFor best results apply in temperatures 40° - 85° A second coat can be applied after 48 hours.\u003c\/p\u003e\u003cp\u003eStore at room temperature\u003c\/p\u003e\u003cp\u003eDo NOT use on flooring or any walking surfaces.\u003c\/p\u003e","brand":"Flitz Products","offers":[{"title":"16oz","offer_id":50581661483266,"sku":"FLI-CS02906","price":35.94,"currency_code":"USD","in_stock":true},{"title":"32oz","offer_id":50581661516034,"sku":"FLI-CS02930","price":53.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/888853_source_1676059410_cc81c0c5-c2a5-4524-9efc-85db33b1f47a.jpg?v=1791078062"},{"product_id":"sticker-off-decal-adhesive-remover","title":"Hardline Products Sticker Off 2 Oz.","description":"\u003cp\u003eSticker Off! Decal Adhesive Remover\u003c\/p\u003e\u003cp\u003eThis boat decal adhesive remover features an environmentally friendly 2 oz pour top recyclable bottle. It works on any decal adhesive, number plate backgrounds, OEM decals, boat registration numbers, sponsorship decals, graphics kits, racing numbers and much more. With this remover, there will be no more sticky residue left to mess up your new decals.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eEnvironmentally Friendly\u003c\/p\u003e\u003cp\u003eWorks On Any Decal Adhesive, Number Plate Backgrounds and OEM Decals\u003c\/p\u003e\u003cp\u003eWorks On Registration Numbers, Sponsorship Decals, Graphics Kits and Racing Numbers\u003c\/p\u003e\u003cp\u003e2 oz. Pour Top Recyclable Bottle\u003c\/p\u003e","brand":"Hardline Products","offers":[{"title":"Default Title","offer_id":50581698937090,"sku":"H-L-965","price":5.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/H-L-965_lg__44564.1558116823_60f09e0a-8c43-4aa4-aaaa-29c5c3284c9e.webp?v=1791078312"},{"product_id":"keelshield-self-adhesive-3m-hull-protector-for-personal-watercraft-5ft","title":"Keel Shield Gator Guard 5' Keelshield White-Pwc","description":"\u003cp\u003eEasy, Do It Yourself Installation\u003c\/p\u003e\u003cp\u003eGuaranteed to last the lifetime of your boat\u003c\/p\u003e\u003cp\u003eAvailable in 11 colors and various lengths\u003c\/p\u003e\u003cp\u003ePrevent costly repairs\u003c\/p\u003e\u003cp\u003eMaintain the value of your boat\u003c\/p\u003e\u003cp\u003e100% Made in the USA\u003c\/p\u003e\u003cp\u003eWorks on fiberglass and most aluminum boats\u003c\/p\u003e\u003cp\u003eThe keel of most boats is the center line running down the bottom of your boat. It generally protrudes and slices into the water. Because of this, the keel both slices the water first, and also bumps into concrete, ramps, docks, and rocky shores first. But it doesn’t have to. KeelShield was developed to protect your most vulnerable, and constant point of contact. Made of pure Urethane Polymers, this 5” wide rugged shield is the strongest and most durable protection for you keel from abrasions, scratches, and scars.\u003c\/p\u003e\u003cp\u003eKeelShield is easy to install, just Prep-Peel-Stick (see our video below). Once its on you are good to go. Installation does not require time to cure. And with our exclusive 3M adhesive system, it stays on, we guarantee it.\u003c\/p\u003e\u003cp\u003eNo, KeelShield will not work on the Yamaha VX 110 and the Sea Doo 4-Tec Hull design. KeelShield is 5\" wide and the jet ski hull needs to be smooth with no ridges for the product to work.\u003c\/p\u003e","brand":"Keel Shield Gator Guard","offers":[{"title":"Default Title","offer_id":50581751431426,"sku":"K-S-5WPWC","price":173.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/k-s-5owpwc_lg__11981.1558171268_76556c69-ca85-4493-8af3-91442c7b6cb2.jpg?v=1791078650"},{"product_id":"keelshield-self-adhesive-hull-protector","title":"Keel Shield Gator Guard KeelShield Self Adhesive Hull Protector","description":"\u003cp\u003eKeelShield Self Adhesive Hull Protector\u003c\/p\u003e\u003cp\u003e#1 Keel protection for your boat.\u003c\/p\u003e\u003cp\u003eThe keel of your boat is the most vulnerable part of your boat and is susceptible to damage from concrete, docks, beaches, and rocky shores. It is the center line running down the bottom of the hull of your boat. It is a structural element designed to allow the boat to stay upright and slice through the water and is the first contact with the water but also a vulnerable spot for damage. Hull protectors provide the shield you need to protect the Keel of your boat.\u003c\/p\u003e\u003cp\u003eKeelshield Self Adhesive Hull Protectors are the industry leader in hull protectors. They are made with pure Urethane Polymers, one the strongest most durable materials. They work on most fiberglass or aluminum boats and are easy to install. No need for a marine mechanic, these hull protectors have an easy do it yourself installation. Available in 11 colors you are sure to find one to match your boat. Using the Keelshield Self Adhesive Protector helps maintain the value of your boat and guarantees to last the lifetime of your boat.\u003c\/p\u003e\u003cp\u003eInstallation is easy, just prep, peel the stick. It is made with the exclusive 3M Adhesive system and is guaranteed to stay on. This product will not affect the performance of your boat.\u003c\/p\u003e\u003cp\u003eKey Features:\u003c\/p\u003e\u003cp\u003eEasy, Do It Yourself Installation\u003c\/p\u003e\u003cp\u003eGuaranteed to last the lifetime of your boat\u003c\/p\u003e\u003cp\u003eAvailable in 11 colors and various lengths\u003c\/p\u003e\u003cp\u003ePrevent costly repairs\u003c\/p\u003e\u003cp\u003eMaintain the value of your boat\u003c\/p\u003e\u003cp\u003e100% Made in the USA\u003c\/p\u003e\u003cp\u003eWorks on fiberglass and most aluminum boats\u003c\/p\u003e\u003cp\u003eKeelShield Sizing Guide\u003c\/p\u003e\u003cp\u003eKeelShield can adhere to boats made of fiberglass, urethane, treated wood, and all metals. Download the guides below for more fit and sizing information. Please note that KeelShield will adhere to crafts made of fiberglass, urethane, treated wood and all metals. It will not work on pontoon boats, boats whose trailers have weight bearing rollers, bunks or pads that the KeelShield will rest on or will come into contact with.\u003c\/p\u003e\u003cp\u003eKeel Shield Size\u003c\/p\u003e\u003cp\u003eBoat Length\u003c\/p\u003e\u003cp\u003e4 ft\u003c\/p\u003e\u003cp\u003e13 ft and Less\u003c\/p\u003e\u003cp\u003e5 ft\u003c\/p\u003e\u003cp\u003eup to 14 ft\u003c\/p\u003e\u003cp\u003e6 ft\u003c\/p\u003e\u003cp\u003e15 to 16 ft\u003c\/p\u003e\u003cp\u003e7 ft\u003c\/p\u003e\u003cp\u003e17 to 18 ft\u003c\/p\u003e\u003cp\u003e8 ft\u003c\/p\u003e\u003cp\u003e19 to 21 ft\u003c\/p\u003e\u003cp\u003e9 ft\u003c\/p\u003e\u003cp\u003e22 to 24 ft\u003c\/p\u003e\u003cp\u003e10 ft\u003c\/p\u003e\u003cp\u003e25 to 26 ft\u003c\/p\u003e\u003cp\u003e11 ft\u003c\/p\u003e\u003cp\u003e27 to 28 ft\u003c\/p\u003e\u003cp\u003e12 ft\u003c\/p\u003e\u003cp\u003e29 to 30 ft\u003c\/p\u003e\u003cp\u003eIf you're unsure if KeelShield is compatible with your boat, please contact the manufacturer to confirm compatibility prior to purchasing.\u003c\/p\u003e\u003cp\u003eKeelShield Installation Video\u003c\/p\u003e\u003cp\u003eClick here to download KeelShield Fiberglass Application Instructions\u003c\/p\u003e\u003cp\u003eClick here to download KeelShield Aluminum Application Instructions\u003c\/p\u003e","brand":"Keel Shield Gator Guard","offers":[{"title":"6' Black","offer_id":50581751529730,"sku":"K-S-6BK","price":207.65,"currency_code":"USD","in_stock":true},{"title":"6' Keel Guard, Gray","offer_id":50581751562498,"sku":"K-S-6G","price":207.65,"currency_code":"USD","in_stock":true},{"title":"6' Keel Guard, Light Gray","offer_id":50581751595266,"sku":"K-S-6LG","price":207.65,"currency_code":"USD","in_stock":true},{"title":"6' Keel Guard, White","offer_id":50581751628034,"sku":"K-S-6WH","price":207.65,"currency_code":"USD","in_stock":true},{"title":"7' Keel Guard, Black","offer_id":50581751660802,"sku":"K-S-7BK","price":242.26,"currency_code":"USD","in_stock":false},{"title":"7' Keel Guard, Gray","offer_id":50581751693570,"sku":"K-S-7G","price":242.26,"currency_code":"USD","in_stock":true},{"title":"7' Keel Guard, Light Gray","offer_id":50581751726338,"sku":"K-S-7LG","price":242.26,"currency_code":"USD","in_stock":true},{"title":"7' Keel Guard, White","offer_id":50581751759106,"sku":"K-S-7WH","price":242.26,"currency_code":"USD","in_stock":true},{"title":"8' Keel Guard, Black","offer_id":50581751791874,"sku":"K-S-8BK","price":276.86,"currency_code":"USD","in_stock":true},{"title":"8' Keel Guard, Gray","offer_id":50581751824642,"sku":"K-S-8G","price":276.86,"currency_code":"USD","in_stock":true},{"title":"8' Keel Guard, Light Gray","offer_id":50581751857410,"sku":"K-S-8LG","price":276.86,"currency_code":"USD","in_stock":true},{"title":"8' Keel Guard, White","offer_id":50581751890178,"sku":"K-S-8WH","price":276.86,"currency_code":"USD","in_stock":true},{"title":"9' Keel Guard, Black","offer_id":50581751922946,"sku":"K-S-9BK","price":311.47,"currency_code":"USD","in_stock":true},{"title":"9' Keel Guard, White","offer_id":50581751955714,"sku":"K-S-9WH","price":311.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/KeelShield-Contents__19385.1722348026_2b313fa8-7778-4b31-8fdb-0b0a4faa74ae.jpg?v=1791078652"},{"product_id":"keel-guard-self-adhesive-polymer-keel-protector","title":"Keel Guard Self Adhesive Polymer Keel Protector","description":"\u003cp\u003eMegaware Keel Guard Self Adhesive Polymer Boat Keel Protector\u003c\/p\u003e\u003cp\u003eThe Megaware Keel Guard protects your boat's hull from scrapes and cuts. Easy to install, this boat keep protector is available in a variety of colors and sizes. Keel Guard is constructed from a durable and shock absorbent polymer composite. While tough, Keel Guard is also very pliable to conform to the shape of any boat keel. During application, the keel protector’s contoured edge creates a clean, tight seal. Megaware Keel Guards use 3M adhesives which create strength, while permanently bonding and sealing the boat keel protector to the hull’s surface.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eProtect against abrasive sand, rocks, concrete ramps and oyster beds\u003c\/p\u003e\u003cp\u003eEliminate costly repairs\u003c\/p\u003e\u003cp\u003ePatented drag reduction design - will not slow your boat down\u003c\/p\u003e\u003cp\u003eUV-stabilized colors\u003c\/p\u003e\u003cp\u003eIncrease the value of your boat\u003c\/p\u003e\u003cp\u003eNo messy sealants needed\u003c\/p\u003e\u003cp\u003eManufacturer lifetime warranty\u003c\/p\u003e\u003cp\u003eMade in the USA\u003c\/p\u003e\u003cp\u003eKeel Guard Size Chart\u003c\/p\u003e\u003cp\u003eKeelGuard Size\u003c\/p\u003e\u003cp\u003eBoat Length\u003c\/p\u003e\u003cp\u003e5 ft\u003c\/p\u003e\u003cp\u003eup to 16 ft\u003c\/p\u003e\u003cp\u003e6 ft\u003c\/p\u003e\u003cp\u003eup to 18 ft\u003c\/p\u003e\u003cp\u003e7 ft\u003c\/p\u003e\u003cp\u003eup to 20 ft\u003c\/p\u003e\u003cp\u003e8 ft\u003c\/p\u003e\u003cp\u003eup to 22 ft\u003c\/p\u003e\u003cp\u003e9 ft\u003c\/p\u003e\u003cp\u003eup to 24 ft\u003c\/p\u003e\u003cp\u003eHow to Install a Boat Keel Guard\u003c\/p\u003e\u003cp\u003eThe Megaware KeelGuard is a very simple product to install; however, the following instructions must be strictly followed. Any short cuts or missed steps will jeopardize and compromise the full bonding capabilities of the 3M adhesive. For best results, the KeelGuard should be installed at an ambient temperature of 60º or above. Typically, the Megaware KeelGuard is mounted 4 to 6 inches above the waterline on the bow, ending 2 to 3 feet or more beyond the lowest point of the Keel. If protection is required above the Boweye, a separate Bow Guard is available in 1ft to 3ft lengths.\u003c\/p\u003e\u003cp\u003eEtch the surface where the Keel Guard will be installed.\u003c\/p\u003e\u003cp\u003eAny fiberglass mold release agents and wax must be removed.\u003c\/p\u003e\u003cp\u003eUse the included 3M Scotch-Brite pad.\u003c\/p\u003e\u003cp\u003eIf your boat has antifouling bottom paint applied, it must be removed to expose the original gelcoat where the Keel Guard will be installed.\u003c\/p\u003e\u003cp\u003eThoroughly clean the area with isopropyl alcohol.\u003c\/p\u003e\u003cp\u003eUse paper towels or a clean rag.\u003c\/p\u003e\u003cp\u003eRepeat until there is no sign of residue.\u003c\/p\u003e\u003cp\u003eDo not use paint thinner or other patroleum-based cleaners.\u003c\/p\u003e\u003cp\u003ePrime with the included 3M #94 Keel Primer\u003c\/p\u003e\u003cp\u003eApply a very thin coat of the included primer.\u003c\/p\u003e\u003cp\u003eFollow the instructions attached to the applicator.\u003c\/p\u003e\u003cp\u003eEnsure the entire area is primed, especially the edges.\u003c\/p\u003e\u003cp\u003eApply your Keel Guard\u003c\/p\u003e\u003cp\u003ePull back the center liner approximately 8-10 inches exposing the 3M adhesive.\u003c\/p\u003e\u003cp\u003eDo not touch the adhesive with your hands.\u003c\/p\u003e\u003cp\u003eCenter the Keel Guard along the keel and press it firmly in place using your hand or supplied burnishing tool.\u003c\/p\u003e\u003cp\u003eContinue to align the Keel Guard and peel back the center strip until the entire center is attached to the boat.\u003c\/p\u003e\u003cp\u003eStarting at the bow, pull back the protective liner on either side of the Keel Guard.\u003c\/p\u003e\u003cp\u003eBegin pressing it on with the burnishing tool.\u003c\/p\u003e\u003cp\u003eWork from the center out to ensure no air is trapped between the hull and adhesive.\u003c\/p\u003e\u003cp\u003eContinue working toward the rear until completed.\u003c\/p\u003e\u003cp\u003eRepeat the process for the other side.\u003c\/p\u003e\u003cp\u003eOnce fully attached, use the burnishing tool to apply additional pressure to the entire Keel Guard, ensuring it is firmly attached to your boat. A rubber mallet may also be used to apply even more force to the adhesive. No curing time is required.\u003c\/p\u003e\u003cp\u003eClick to Download Keel Guard Application Instructions\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Megaware Keel Guard Self Adhesive Polymer Boat Keel Protector designed to do? The Megaware Keel Guard protects a boat's hull and keel from scrapes and cuts caused by abrasive sand, rocks, concrete ramps, and oyster beds. It is made from a pliable, shock-absorbent polymer composite that conforms to the shape of the keel and uses 3M adhesive for permanent bonding.\u003c\/li\u003e\n\u003cli\u003eWhat size Megaware Keel Guard should I use for my boat? Megaware Keel Guard sizes are based on boat length. The 5-foo…\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Keel Guard","offers":[{"title":"5' Keel Guard, White","offer_id":50581845573890,"sku":"MKI-102W5","price":193.14,"currency_code":"USD","in_stock":true},{"title":"6' Keel Guard, Almond","offer_id":50581845606658,"sku":"MKI-102A6","price":217.14,"currency_code":"USD","in_stock":true},{"title":"6' Keel Guard, Black","offer_id":50581845639426,"sku":"MKI-102B6","price":217.14,"currency_code":"USD","in_stock":false},{"title":"6' Keel Guard, Blue","offer_id":50581845672194,"sku":"MKI-102BL6","price":217.14,"currency_code":"USD","in_stock":true},{"title":"6' Keel Guard, Gray","offer_id":50581845704962,"sku":"MKI-20506","price":217.14,"currency_code":"USD","in_stock":true},{"title":"6' Keel Guard, Light Gray","offer_id":50581845737730,"sku":"MKI-102LG6","price":217.14,"currency_code":"USD","in_stock":true},{"title":"6' Keel Guard, Red","offer_id":50581845770498,"sku":"MKI-102R6","price":217.14,"currency_code":"USD","in_stock":false},{"title":"6' Keel Guard, White","offer_id":50581845803266,"sku":"MKI-102W6","price":217.14,"currency_code":"USD","in_stock":true},{"title":"7' Keel Guard, Black","offer_id":50581845836034,"sku":"MKI-102B7","price":245.94,"currency_code":"USD","in_stock":false},{"title":"7' Keel Guard, Gray","offer_id":50581845868802,"sku":"MKI-20507","price":245.94,"currency_code":"USD","in_stock":true},{"title":"7' Keel Guard, White","offer_id":50581845901570,"sku":"MKI-102W7","price":245.94,"currency_code":"USD","in_stock":true},{"title":"8' Keel Guard, Black","offer_id":50581845934338,"sku":"MKI-102B8","price":271.14,"currency_code":"USD","in_stock":false},{"title":"8' Keel Guard, Gray","offer_id":50581845967106,"sku":"MKI-20508","price":271.14,"currency_code":"USD","in_stock":true},{"title":"8' Keel Guard, White","offer_id":50581845999874,"sku":"MKI-102W8","price":271.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/866639_source_1563382893.jpg?v=1791079296"},{"product_id":"permatex-high-performance-thread-sealant-50ml","title":"Permatex High Performance Thread Seal 50ml","description":"\u003cp\u003ePermatex High Performance Thread Sealant 50ml 56521\u003c\/p\u003e\u003cp\u003eFormulated specifically for tapered metal pipe thread fittings, this sealant cures rapidly and can withstand up to 10,000PSI.\u003c\/p\u003e\u003cp\u003eWhy you shoul use Permatex Thread Sealant\u003c\/p\u003e\u003cp\u003eAllows repositioning after application\u003c\/p\u003e\u003cp\u003eWithstands up to 10,000PSI\u003c\/p\u003e\u003cp\u003ePrevents galling and protects threads\u003c\/p\u003e\u003cp\u003eFormualted for metal tapered pipe thread fittings\u003c\/p\u003e\u003cp\u003eThis thread sealant also provides rust and corrosion resistance to the thread. Prevents leakage from vibrations, temperature changes, and extreme pressure.\u003c\/p\u003e","brand":"Permatex","offers":[{"title":"Default Title","offer_id":50581921104130,"sku":"PER-56521","price":19.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/PER-56521__20810.1747363845.webp?v=1791079906"},{"product_id":"permatex-all-purpose-spray-adhesive-16oz","title":"Permatex Spray Adhesive 16oz","description":"\u003cp\u003ePermatex All-Purpose Spray Adhesive 16oz 82019\u003c\/p\u003e\u003cp\u003eThis spray adhesive is formulated for both permanent and repositionable bonding that won't bleed through. This unique formula resists water and humidity to create a lasting bond on a wide variety of surfaces. Able to be applied to both porous and onporous materials this adhesive will not shrink over time.\u003c\/p\u003e\u003cp\u003eAll-Purpose Spray Adhesive Features\u003c\/p\u003e\u003cp\u003eResists water and humidity\u003c\/p\u003e\u003cp\u003eAdheres to porous and nonporous materials\u003c\/p\u003e\u003cp\u003eAllows permanent and repositionable bonding\u003c\/p\u003e\u003cp\u003eWon't bleed through\u003c\/p\u003e\u003cp\u003eThis adhesive spray is excellent at attaching upholstery cloth, carpeting, floor mats, insulation, and more!\u003c\/p\u003e","brand":"Permatex","offers":[{"title":"Default Title","offer_id":50581921857794,"sku":"PER-82019","price":13.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/PER-82019__65388.1747363846_2d6cc0b3-8c80-4508-a3f1-39a326d2f502.webp?v=1791079916"},{"product_id":"hawk-epoxy-f1-high-load-adhesive-fiber-filler","title":"Sea Hawk He High Load Adhesive Fiber Filler 15.2Oz","description":"\u003cp\u003eHawk Epoxy F1 High Load Adhesive Fiber Filler\u003c\/p\u003e\u003cp\u003eThe Sea Hawk Hawk Epoxy F1 High Load Adhesive Fiber Filler is an easy to use adhesive designed to work with the Hawk Epoxy System. Ideal for bonding hardware and other applications with dissimilar materials. When used the mixture will maximize bond strength for anticipated high loads.\u003c\/p\u003e\u003cp\u003eThe Sea Hawk Hawk Epoxy F1 High Load Adhesive Fiber Filler compares to 404 High Density Filler\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eThickens to a light grey color\u003c\/p\u003e\u003cp\u003eEasy to use adhesive\u003c\/p\u003e\u003cp\u003eDesigned for bonding hardware\u003c\/p\u003e\u003cp\u003eMaximizes bond strength for anticipated high loads\u003c\/p\u003e\u003cp\u003eDirections For Use:\u003c\/p\u003e\u003cp\u003eMix the Hawk Epoxy resin and catalyst\u003c\/p\u003e\u003cp\u003eMix the filler thoroughly. Then blend in small amounts of filler to the mixed resin and catalyst until the desired thickness is achieved\u003c\/p\u003e\u003cp\u003eDepending on use, mixing more or less filler will allow multiple uses with the same filler. For Example:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIf you desire a zero-sag effect mix to a very thick consistency. This can act as a filler for uneven surfaces without worry of sag\u003c\/li\u003e\n\u003cli\u003eFor laminating flat panels or bonding large surfaces, filler should be mixed to a pourable or injectable consistency\u003c\/li\u003e\n\u003cli\u003eTo ensure maximum adhesion strength, use only enough filler to avoid sagging or running. When using a resin\/catalyst\/filler mixture for bonding, a small amount of mixture should squeeze out from between the two items that are being bonded to each other when they are pushed together.\u003c\/li\u003e\n\u003cli\u003eFor general bonding, filleting, or bonding hardware, mix material to a slightly to moderately thick consistency.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eClick here to download Hawk Epoxy Application guide\u003c\/p\u003e","brand":"Sea Hawk","offers":[{"title":"Default Title","offer_id":50582214377730,"sku":"S-H-F1-S","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/Hawk_Epoxy_F1_High_Load_Adhesive_Fiber_Filler__25369.1722352820_ef7820f4-1440-4e33-a6ba-ccae77ed17c7.png?v=1791080727"},{"product_id":"hawk-epoxy-f2-structural-adhesive-filler","title":"Sea Hawk He Structural Adhesive Filler 1.7Oz","description":"\u003cp\u003eHawk Epoxy F2 Structural Adhesive Filler\u003c\/p\u003e\u003cp\u003eThe Sea Hawk Hawk Epoxy F2 Structural Adhesive Filler is an easy to use adhesive designed to work with the Hawk Epoxy System. Ideal for bonding, gap filling, and filleting. When used the mixture allows for sag free and easy flow properties for vertical and overhead applications.\u003c\/p\u003e\u003cp\u003eThe Sea Hawk Hawk Epoxy F2 Structural Adhesive Filler compares to 406 Colloidal Silica\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eThickens to an off white color\u003c\/p\u003e\u003cp\u003eGeneral purpose thickening additive\u003c\/p\u003e\u003cp\u003eDesigned for bonding, gap filling, and filleting\u003c\/p\u003e\u003cp\u003eWorkable consistency allows for sag-free and easy flow\u003c\/p\u003e\u003cp\u003eProperties for vertical and overhead applications\u003c\/p\u003e\u003cp\u003eDirections For Use:\u003c\/p\u003e\u003cp\u003eMix the Hawk Epoxy resin and catalyst\u003c\/p\u003e\u003cp\u003eMix the filler thoroughly. Then blend in small amounts of filler to the mixed resin and catalyst until the desired thickness is achieved\u003c\/p\u003e\u003cp\u003eDepending on use, mixing more or less filler will allow multiple uses with the same filler. For Example:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIf you desire a zero-sag effect mix to a very thick consistency. This can act as a filler for uneven surfaces without worry of sag\u003c\/li\u003e\n\u003cli\u003eFor laminating flat panels or bonding large surfaces, filler should be mixed to a pourable or injectable consistency\u003c\/li\u003e\n\u003cli\u003eTo ensure maximum adhesion strength, use only enough filler to avoid sagging or running. When using a resin\/catalyst\/filler mixture for bonding, a small amount of mixture should squeeze out from between the two items that are being bonded to each other when they are pushed together.\u003c\/li\u003e\n\u003cli\u003eFor general bonding, filleting, or bonding hardware, mix material to a slightly to moderately thick consistency.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eClick here to download Hawk Epoxy Application guide\u003c\/p\u003e","brand":"Sea Hawk","offers":[{"title":"Default Title","offer_id":50582214803714,"sku":"S-H-F2-S","price":11.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/Hawk_Epoxy_F2_Structural_Adhesive_Filler__74930_optimized__71394.1722514795_418de7cc-caf5-4863-9a5a-0532db081630.png?v=1791080728"},{"product_id":"hawk-epoxy-f3-light-density-adhesive-microfiber-filler","title":"Sea Hawk He Light Density Adh. Micro Fiber Filler 6Oz","description":"\u003cp\u003eHawk Epoxy F3 Light Density Adhesive MicroFiber Filler\u003c\/p\u003e\u003cp\u003eThe Sea Hawk Hawk Epoxy F3 Light Density Adhesive MicroFiber Filler is an easy to use adhesive designed to work with the Hawk Epoxy System. Ideal for many substrates, especially wood. The mixture creates a multipurpose adhesive that provides excellent substrate wetting and penetrating characteristics. Increases impact and abrasion resistance.\u003c\/p\u003e\u003cp\u003eThe Sea Hawk Hawk Epoxy F3 Light Density Adhesive MicroFiber Filler compares to 403 Microfibers\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eThickens to an off white color\u003c\/p\u003e\u003cp\u003eIdeal for bonding many substrates, especially wood\u003c\/p\u003e\u003cp\u003eCreates a multipurpose adhesive for many of other substrates\u003c\/p\u003e\u003cp\u003eProvides excellent substrate wetting and penetrating characteristics\u003c\/p\u003e\u003cp\u003eIncreases impact and abrasion resistance\u003c\/p\u003e\u003cp\u003eDirections For Use:\u003c\/p\u003e\u003cp\u003eMix the Hawk Epoxy resin and catalyst\u003c\/p\u003e\u003cp\u003eMix the filler thoroughly. Then blend in small amounts of filler to the mixed resin and catalyst until the desired thickness is achieved\u003c\/p\u003e\u003cp\u003eDepending on use, mixing more or less filler will allow multiple uses with the same filler. For Example:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIf you desire a zero-sag effect mix to a very thick consistency. This can act as a filler for uneven surfaces without worry of sag\u003c\/li\u003e\n\u003cli\u003eFor laminating flat panels or bonding large surfaces, filler should be mixed to a pourable or injectable consistency\u003c\/li\u003e\n\u003cli\u003eTo ensure maximum adhesion strength, use only enough filler to avoid sagging or running. When using a resin\/catalyst\/filler mixture for bonding, a small amount of mixture should squeeze out from between the two items that are being bonded to each other when they are pushed together.\u003c\/li\u003e\n\u003cli\u003eFor general bonding, filleting, or bonding hardware, mix material to a slightly to moderately thick consistency.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eClick here to download Hawk Epoxy Application guide\u003c\/p\u003e","brand":"Sea Hawk","offers":[{"title":"Default Title","offer_id":50582215229698,"sku":"S-H-F3-S","price":11.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/Hawk_Epoxy_F3_Light_Density_Adhesive_MicroFiber_Filler__18388.1722490374_c7968e3b-d987-415f-837c-951447e5d9dc.png?v=1791080729"},{"product_id":"hawk-epoxy-f4-bridging-adhesive-filler","title":"Sea Hawk He Bridging Adhesive Filler 5.6Oz","description":"\u003cp\u003eHawk Epoxy F4 Bridging Adhesive Filler\u003c\/p\u003e\u003cp\u003eThe Sea Hawk Hawk Epoxy F4 Bridging Adhesive Filler is an easy to use adhesive designed to work with the Hawk Epoxy System. This easy to use adhesive has excellent gap filling and filleting qualities. The mixture blends with many different types of wood to allow for a natural looking fillet or gap fill.\u003c\/p\u003e\u003cp\u003eSea Hawk Hawk Epoxy F4 Bridging Adhesive Filler compares to West System 406 Filleting Blend\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eThickens to a brown color\u003c\/p\u003e\u003cp\u003eIdeal for gap filling and filleting\u003c\/p\u003e\u003cp\u003eBlends with many types of wood for a natural looking fillet or gap fill\u003c\/p\u003e\u003cp\u003eDirections For Use:\u003c\/p\u003e\u003cp\u003eMix the Hawk Epoxy resin and catalyst\u003c\/p\u003e\u003cp\u003eMix the filler thoroughly. Then blend in small amounts of filler to the mixed resin and catalyst until the desired thickness is achieved\u003c\/p\u003e\u003cp\u003eDepending on use, mixing more or less filler will allow multiple uses with the same filler. For Example:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIf you desire a zero-sag effect mix to a very thick consistency. This can act as a filler for uneven surfaces without worry of sag\u003c\/li\u003e\n\u003cli\u003eFor laminating flat panels or bonding large surfaces, filler should be mixed to a pourable or injectable consistency\u003c\/li\u003e\n\u003cli\u003eTo ensure maximum adhesion strength, use only enough filler to avoid sagging or running. When using a resin\/catalyst\/filler mixture for bonding, a small amount of mixture should squeeze out from between the two items that are being bonded to each other when they are pushed together.\u003c\/li\u003e\n\u003cli\u003eFor general bonding, filleting, or bonding hardware, mix material to a slightly to moderately thick consistency.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eClick here to download Hawk Epoxy Application guide\u003c\/p\u003e","brand":"Sea Hawk","offers":[{"title":"Default Title","offer_id":50582215360770,"sku":"S-H-F4-S","price":21.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/Hawk_Epoxy_F4_Bridging_Adhesive_Filler__47183.1722496763_8bc9d49e-2da5-462f-b1f0-3cb6c5711096.png?v=1791080730"}],"url":"https:\/\/allmarineworld.com\/collections\/adhesive.oembed","provider":"All Marine World","version":"1.0","type":"link"}